Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_bin_dispose), (gst_decode_bin_set_caps),
(gst_decode_bin_set_subs_encoding),
(gst_decode_bin_get_subs_encoding), (gst_decode_bin_set_property),
(gst_decode_bin_get_property), (analyze_new_pad):
Move subtitle encoding property to decodebin2 so that it can set the
property value on all elements that it autoplugs and that require it.
Make caps refcounting more consistent in get/set.
* gst/playback/gsturidecodebin.c: (_gst_boolean_accumulator),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (proxy_unknown_type_signal),
(proxy_autoplug_continue_signal),
(proxy_autoplug_factories_signal), (proxy_autoplug_select_signal),
(make_decoder):
Proxy properties and relevant signals from the internal decodebin.
Make properties MT safe.
Original commit message from CVS:
Inspired by patch of: René Stadler <mail at renestadler dot de>
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_bin_autoplug_continue),
(gst_decode_bin_autoplug_factories),
(gst_decode_bin_autoplug_select), (analyze_new_pad), (connect_pad),
(find_compatibles):
* gst/playback/gstplay-marshal.list:
Remove the autoplug-sort signal and replace it with a binding friendly
autoplug-select signal.
Add an autoplug-factories signal that can be used to generate a list of
factories to try to autoplug.
Add the GstPad to the autoplugging signal args as it might be needed to
make a good factory selection.
Fix up the marshallers for this. Fixes#407282.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (new_pad), (type_found):
Make the window for a race in typefind and shutting down smaller until
we figure out the right locking here. Avoids #485753 usually.
* gst/playback/gstdecodebin2.c: (type_found), (pad_added_group_cb):
Remove unneeded lock causing a race in typefind and shutting down.
Fixes#485753.
* gst/playback/gstplaybin.c: (gst_play_bin_change_state):
Also remove sinks when going to NULL because we might not complete the
state change to PAUSED, causing the PAUSED->READY state change not to
happen.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found),
(gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (type_found),
(gst_decode_bin_change_state):
Don't disconnect the have_type signal because we never reconnect it
later on. Instead keep a variable to see if we already detected a type.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_fakesink), (type_found):
* gst/playback/gstdecodebin2.c: (gst_decode_bin_init),
(type_found):
Unlink the signal handler when we found the type, we're not going to do
anything sensible with more type_found signals anyway.
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_init),
(gst_text_overlay_set_property):
* ext/vorbis/vorbisdec.c: (vorbis_handle_data_packet):
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/rtp/gstrtcpbuffer.c: (gst_rtcp_ntp_to_unix),
(gst_rtcp_unix_to_ntp):
* gst-libs/gst/rtsp/gstrtspmessage.c: (gst_rtsp_message_get_type):
* gst/playback/gstqueue2.c:
* tests/examples/seek/seek.c: (set_scale):
Fix a bunch of compile warnings shown with Forte.
* gst/audiorate/gstaudiorate.c:
Always pull in config.h before including any system headers.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_flush), (gst_queue_locked_enqueue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_src_activate_pull):
Also fix#476514 for queue2.
Original commit message from CVS:
Patch by: Josep Torra Valles <josep@fluendo.com>
* gst/playback/gstplaybasebin.c:
Increase upper limit for audio queue a bit; fixes preroll problem
with playbin and decodebin2 when playing a quicktime trailer with
multichannel audio via http (#464666).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (close_pad_link):
We need to set up delayed-linking whenever the caps are non-fixed,
not just when there are multiple types - use gst_pad_is_fixed()
to test.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_commit),
(queue_remove_probe), (queue_threshold_reached):
Patch by: Josep Torra Valles <josep@fluendo.com>
Fixes: #465015
Make sure we remove the check_queues buffer probe from the
correct queue to avoid racily going back to "buffering 99%" when
buffering is actually complete.
Also, fix the spelling of Josep's surname in the ChangeLog.
Original commit message from CVS:
Patch by: Josep Torre Valles <josep@fluendo.com>
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(gst_play_base_bin_init), (queue_threshold_reached),
(gen_source_element), (setup_substreams),
(gst_play_base_bin_set_property), (gst_play_base_bin_get_property),
(gst_play_base_bin_get_streaminfo_value_array):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(gst_play_bin_set_property), (gst_play_bin_get_property),
(gst_play_bin_handle_redirect_message):
Move connection-speed property from playbin to playbasebin so that we
can also configure it in source elements that have the connection-speed
property. Fixes#464028.
Add some debug info here and there.
Original commit message from CVS:
Patch by: Dan Williams <dcbw at redhat dot com>
* gst/playback/gstplaybasebin.c:
(gst_play_base_bin_get_streaminfo_value_array):
Don't return NULL when querying the stream info value array but instead
return an empty array. Fixes#459204.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (no_more_pads_full),
(setup_source):
Clear the dynamic pads counter when starting a new uri. This makes
reusing playbin work again.
Fixes#454264.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering):
Use other metrics as well when estimating the buffer level.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (make_decoder), (setup_source):
Small debug improvement.
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering),
(plugin_init):
Tweak the rate estimation period.
When calculating the buffer filledness in rate estimation mode, don't
mix it with other metrics.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_new),
(gst_decode_group_expose), (gst_decode_group_free), (add_fakesink):
When creating the groups, allow for a 5 second, unlimited buffers
preroll phase after which we expose the group.
When the group is exposed, use a small number of buffers up to a 2
second limit. Also disconnect the overrun signal from multiqueue when we
exposed the group because it is not needed anymore.
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_find_chains):
The chain should be freed if we error out here, else it will leak.
* gst/playback/gstdecodebin.c: (disconnect_unlinked_signals),
(cleanup_decodebin):
Don't forget to *properly* remove the signals, else it will leak.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
When handling a delayed-caps notification case, mark
the group as dynamic so that the nbdynamic count is
incremented and decremented correctly. Fixes: #449156
Patch by: Wim Taymans <wim@fluendo.com>
Original commit message from CVS:
Patches by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_enqueue):
Fix a division by zero when the max percent is <= 0. Fixes#446572.
also update the buffering status when receiving events. Fixes#446551.
Original commit message from CVS:
Based on patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_peer_query),
(gst_queue_handle_src_query):
Wait for preroll before attempting to forward a duration query upstream.
Fixes#445505.
Original commit message from CVS:
Patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_init),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_get_range), (gst_queue_src_checkgetrange_function),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_src_activate_pull):
Add pull based scheduling and fix some deadlocks. Fixes#444523.
Does not yet completely work because duration queries upstream won't
block yet.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_have_data),
(gst_queue_create_read), (gst_queue_read_item_from_file),
(gst_queue_open_temp_location_file), (gst_queue_locked_enqueue):
Include stdio to define fseeko.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (no_more_pads_full),
(new_decoded_pad), (remove_pads), (make_decoder), (setup_source),
(gst_uri_decode_bin_change_state):
Make sure we name srcpads uniquely even when using different internal
decodebins.
Signal no-more-pads when no more dynamic elements exist.
Remove pads on cleanup.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter),
(analyze_new_pad), (connect_pad), (expose_pad), (caps_notify_cb),
(caps_notify_group_cb), (gst_decode_group_new),
(gst_decode_group_free):
Add support for delayed caps fixation when autoplugging.
Optimize cases where a multiqueue is not needed/wanted, like right after
anything that is not a demuxer.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (queue_overrun),
(no_more_pads_full):
Stop buffering when the group is commited because the queues filled up.
Fixes#442024.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (new_decoded_pad_full):
Handle unknown or invalid pads without crashing, as might occur if
a media file like an mp3 is specified as a subtitle file.
Fixes: #410039
Original commit message from CVS:
* gst/playback/gstplaybin.c: (add_sink), (dummy_blocked_cb),
(setup_sinks):
Block the subtitle bin output queue before ghosting it and linking,
then unblock after. This avoids spurious not-linked errors caused
by the queue starting up (because it gets linked when it is ghosted).
Fixes: #350299
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_read_sector):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Small cleanups.
* ext/theora/theoradec.c: (theora_dec_sink_event):
Fix typo.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_set_gst_timestamp):
Add some FIXME
* gst/playback/gstdecodebin.c: (queue_underrun_cb):
And some debug info when a FIXME path is hit.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter):
Make decodebin2 autoplug depayloaders too.
* gst/playback/gsturidecodebin.c: (source_new_pad):
Set the newly created decoder in a usable state when autoplugging a
dynamic source such as RTSP.
Original commit message from CVS:
* gst/playback/gststreaminfo.c: (cb_probe):
Ignore video-codec tag for audio streams and ignore audio-codec tags
for video streams. Should make codec name collection a bit more
robust against sloppy demuxers that send tag events containing both
tags down each pad.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_rates):
Tweak the buffering thresholds a little.
Update the buffer size with the previously calculate rate instead of
only when we calculate a new rate so that we get smoother buffering
updates.
* gst/playback/Makefile.am:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_base_init),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (unknown_type),
(add_element_stream), (no_more_pads_full), (no_more_pads),
(source_no_more_pads), (new_decoded_pad), (array_has_value),
(gen_source_element), (has_all_raw_caps), (analyse_source),
(remove_decoders), (make_decoder), (remove_source),
(source_new_pad), (setup_source), (decoder_query_init),
(decoder_query_duration_fold), (decoder_query_duration_done),
(decoder_query_position_fold), (decoder_query_position_done),
(decoder_query_latency_fold), (decoder_query_latency_done),
(decoder_query_seeking_fold), (decoder_query_seeking_done),
(decoder_query_generic_fold), (gst_uri_decode_bin_query),
(gst_uri_decode_bin_change_state), (plugin_init):
New element that intergrates a source, optional buffering element and
decodebin.
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstqueue2.c: (gst_queue_get_type),
(gst_queue_class_init), (gst_queue_init), (gst_queue_finalize),
(gst_queue_getcaps), (gst_queue_bufferalloc),
(gst_queue_acceptcaps), (update_time_level), (apply_segment),
(apply_buffer), (update_buffering), (reset_rate_timer),
(update_rates), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_is_empty),
(gst_queue_is_filled), (gst_queue_chain), (gst_queue_push_one),
(gst_queue_loop), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_change_state),
(gst_queue_set_property), (gst_queue_get_property), (plugin_init):
On our way to playbin2 this is the new network queue that does buffering
all by itself using high and low watermarks. It can also measure up and
downstream bandwidth to optimally size the queue.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (fill_buffer), (check_queue),
(queue_out_of_data):
Connect to the new queue "pushing" signal instead of the broken
"running" one.
