Original commit message from CVS:
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering):
Use other metrics as well when estimating the buffer level.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (make_decoder), (setup_source):
Small debug improvement.
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering),
(plugin_init):
Tweak the rate estimation period.
When calculating the buffer filledness in rate estimation mode, don't
mix it with other metrics.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_new),
(gst_decode_group_expose), (gst_decode_group_free), (add_fakesink):
When creating the groups, allow for a 5 second, unlimited buffers
preroll phase after which we expose the group.
When the group is exposed, use a small number of buffers up to a 2
second limit. Also disconnect the overrun signal from multiqueue when we
exposed the group because it is not needed anymore.
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_find_chains):
The chain should be freed if we error out here, else it will leak.
* gst/playback/gstdecodebin.c: (disconnect_unlinked_signals),
(cleanup_decodebin):
Don't forget to *properly* remove the signals, else it will leak.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
When handling a delayed-caps notification case, mark
the group as dynamic so that the nbdynamic count is
incremented and decremented correctly. Fixes: #449156
Patch by: Wim Taymans <wim@fluendo.com>
Original commit message from CVS:
Patches by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_enqueue):
Fix a division by zero when the max percent is <= 0. Fixes#446572.
also update the buffering status when receiving events. Fixes#446551.
Original commit message from CVS:
Based on patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_peer_query),
(gst_queue_handle_src_query):
Wait for preroll before attempting to forward a duration query upstream.
Fixes#445505.
Original commit message from CVS:
Patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_init),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_get_range), (gst_queue_src_checkgetrange_function),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_src_activate_pull):
Add pull based scheduling and fix some deadlocks. Fixes#444523.
Does not yet completely work because duration queries upstream won't
block yet.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_have_data),
(gst_queue_create_read), (gst_queue_read_item_from_file),
(gst_queue_open_temp_location_file), (gst_queue_locked_enqueue):
Include stdio to define fseeko.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (no_more_pads_full),
(new_decoded_pad), (remove_pads), (make_decoder), (setup_source),
(gst_uri_decode_bin_change_state):
Make sure we name srcpads uniquely even when using different internal
decodebins.
Signal no-more-pads when no more dynamic elements exist.
Remove pads on cleanup.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter),
(analyze_new_pad), (connect_pad), (expose_pad), (caps_notify_cb),
(caps_notify_group_cb), (gst_decode_group_new),
(gst_decode_group_free):
Add support for delayed caps fixation when autoplugging.
Optimize cases where a multiqueue is not needed/wanted, like right after
anything that is not a demuxer.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (queue_overrun),
(no_more_pads_full):
Stop buffering when the group is commited because the queues filled up.
Fixes#442024.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (new_decoded_pad_full):
Handle unknown or invalid pads without crashing, as might occur if
a media file like an mp3 is specified as a subtitle file.
Fixes: #410039
Original commit message from CVS:
* gst/playback/gstplaybin.c: (add_sink), (dummy_blocked_cb),
(setup_sinks):
Block the subtitle bin output queue before ghosting it and linking,
then unblock after. This avoids spurious not-linked errors caused
by the queue starting up (because it gets linked when it is ghosted).
Fixes: #350299
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_read_sector):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Small cleanups.
* ext/theora/theoradec.c: (theora_dec_sink_event):
Fix typo.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_set_gst_timestamp):
Add some FIXME
* gst/playback/gstdecodebin.c: (queue_underrun_cb):
And some debug info when a FIXME path is hit.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter):
Make decodebin2 autoplug depayloaders too.
* gst/playback/gsturidecodebin.c: (source_new_pad):
Set the newly created decoder in a usable state when autoplugging a
dynamic source such as RTSP.
Original commit message from CVS:
* gst/playback/gststreaminfo.c: (cb_probe):
Ignore video-codec tag for audio streams and ignore audio-codec tags
for video streams. Should make codec name collection a bit more
robust against sloppy demuxers that send tag events containing both
tags down each pad.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_rates):
Tweak the buffering thresholds a little.
Update the buffer size with the previously calculate rate instead of
only when we calculate a new rate so that we get smoother buffering
updates.
* gst/playback/Makefile.am:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_base_init),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (unknown_type),
(add_element_stream), (no_more_pads_full), (no_more_pads),
(source_no_more_pads), (new_decoded_pad), (array_has_value),
(gen_source_element), (has_all_raw_caps), (analyse_source),
(remove_decoders), (make_decoder), (remove_source),
(source_new_pad), (setup_source), (decoder_query_init),
(decoder_query_duration_fold), (decoder_query_duration_done),
(decoder_query_position_fold), (decoder_query_position_done),
(decoder_query_latency_fold), (decoder_query_latency_done),
(decoder_query_seeking_fold), (decoder_query_seeking_done),
(decoder_query_generic_fold), (gst_uri_decode_bin_query),
(gst_uri_decode_bin_change_state), (plugin_init):
New element that intergrates a source, optional buffering element and
decodebin.
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstqueue2.c: (gst_queue_get_type),
(gst_queue_class_init), (gst_queue_init), (gst_queue_finalize),
(gst_queue_getcaps), (gst_queue_bufferalloc),
(gst_queue_acceptcaps), (update_time_level), (apply_segment),
(apply_buffer), (update_buffering), (reset_rate_timer),
(update_rates), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_is_empty),
(gst_queue_is_filled), (gst_queue_chain), (gst_queue_push_one),
(gst_queue_loop), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_change_state),
(gst_queue_set_property), (gst_queue_get_property), (plugin_init):
On our way to playbin2 this is the new network queue that does buffering
all by itself using high and low watermarks. It can also measure up and
downstream bandwidth to optimally size the queue.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (fill_buffer), (check_queue),
(queue_out_of_data):
Connect to the new queue "pushing" signal instead of the broken
"running" one.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found), (plugin_init):
* gst/playback/gstdecodebin2.c: (plugin_init):
Better error message for text files.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (add_sink),
(gst_play_bin_change_state):
Activate sync in playbin, we are ready to handle it for live streams.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/playback/gstplaybasebin.c: (add_stream):
Fix leak in add_stream(), when g_value_set_object() increases the
refcount of streaminfo object. Fixes#426250.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/playback/gstdecodebin2.c: (connect_pad), (expose_pad),
(deactivate_free_recursive):
Decodebin2 doesn't unref pads it obtains in some occasions:
- multiqueue src pads, when either connecting further or exposing
- sink pads of new autoplugged elements
- peer pads when recursively freeing elements
Fixes#425455.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init):
Remove playbin's override of the set_clock vmethod. It's irrelevant
after Wim's commit on the 19th.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (remove_fakesink):
Don't post STATE_DIRTY anymore.
* gst/playback/gstplaybin.c: (add_sink), (gst_play_bin_send_event),
(gst_play_bin_change_state):
Remove stream_time reset in seek handling, core does that now.
Disable clocking for live pipelines by forcing a NULL clock to the
complete pipeline, core is too smart now for our previous hack.
We can always autoplug in PAUSED now.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
* docs/plugins/inspect/plugin-decodebin2.xml:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init):
Add documentation for decodebin2 that indicates that the API
is still unstable.
Original commit message from CVS:
Patch by: Ed Catmur <ed at catmur dot co dot uk>
* gst/playback/gstplaybin.c: (gst_play_bin_vis_unblocked),
(gst_play_bin_vis_blocked), (gst_play_bin_set_property):
Fix race condition when rapidly switching visualisations in playbin.
Fixes#401029.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_dispose),
(multi_queue_underrun_cb), (gst_decode_group_check_if_drained),
(sort_end_pads), (gst_decode_group_expose),
(gst_decode_group_hide):
Don't free groups from the streaming threads. Just put them aside and
free them in dispose.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (connect_element),
(pad_added_group_cb), (gst_decode_group_check_if_blocked),
(sort_end_pads), (gst_decode_group_expose):
Handle dynamic pads within groups.
Sort pads before exposing them in order to make playbin happy.
There still is a race with the multiqueue filling up. This should be
solved separately.
Fixes#398721
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source):
When we have external subtitles and wait for the subtitle decodebin
to get up and running, we set up a (sync) bus handler for the
subtitle decodebin, so we can stop waiting when it posts an error
message. However, we should do that before we set the subtitle
decodebin's state to playing, otherwise things are racy and we might
miss error messages posted before we had a chance to set up the bus.
This should finally fix totem hanging on .txt pseudo-subtitle files.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_fakesink),
(gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (add_fakesink),
(gst_decode_bin_change_state):
Don't error out if there is no fakesink in the READY to NULL state
change, since when decodebin is re-used, we're only adding the
fakesink element in READY to PAUSED.
* tests/check/elements/decodebin.c:
(new_decoded_pad_plug_fakesink_cb), (GST_START_TEST),
(decodebin_suite):
Minimal unit test to make sure we can use the same decodebin
instance twice (at least with audiotestsrc input).
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_vis_element):
Add audioresample+audioconvert in front of the visualisation
element, so that elements like libvisual 0.4 that don't support all
samplerates can work.
Fixes: #402505
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_get_property),
(gst_play_base_bin_get_streaminfo_value_array):
Take some locks and make a copy of the streaminfo value array we
maintain while holding the lock, so that the application can
retrieve the stream-info as a value array in a thread-safe way.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_dispose):
Cast lock macro parameters to make sure we're actually accessing the
lock member at the right class level. Free list itself in _dispose()
as well and NULL it in case dispose gets called multiple times.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
(gst_decode_bin_dispose),(gst_decode_bin_finalize):
Free GstDecodeGroups no longer used.
(gst_decode_group_expose):
Don't unlock too many times !
(deactivate_free_recursive):
Free iterator once we're done with it.
Fix for recursively deactivating elements (stop at ghostpads).
Original commit message from CVS:
* gst/playback/gstplaybin.c: (handoff):
Fix up caps on the frame buffer before we save it and potentially
make it accessible to other threads via g_object_get; also use
gst_buffer_replace() instead of gst_mini_object_replace().
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_finalize),
(gst_decode_group_new), (gst_decode_group_free):
Set queues to bigger sizes to cope with HD contents.
Fix some mutex freeing and add comment about MT safe methods.
