stream.segment should be updated with the values of the current edit
list, also when a new `moov` is received. Unfortunately this was not
being the case because of an early return.
As a consequence of this bugs, no end of movie clipping was being
performed on the new moov and no segment event was being emitted.
When performing stream switching (e.g. in MSE) the new moov may have a
different edit list. This is often the case when switching between
baseline H.264 (which lacks B-frames) and more demanding profiles. For
this reason it's important to emit a new segment in order to be able
to get matching stream times.
This patch moves the initialization of QtDemuxStream.segment from
gst_qtdemux_add_stream() to _create_stream(). This ensures the segment
is always initialized when the stream is created.
Otherwise the segment format is left as GST_FORMAT_UNDEFINED in the case
were a track is reparsed and qtdemux_reuse_and_configure_stream() is
called instead of gst_qtdemux_add_stream(). (See
qtdemux_expose_streams() in the non streams-aware case.)
If ctts (CompositionOffsetBox) has larger sample_offset
(offset between PTS and DTS) than (2 * duration) of the stream,
assume the ctts box to be corrupted and ignore the box.
https://bugzilla.gnome.org/show_bug.cgi?id=797262
This fixes a bug where in some files mehd.fragment_duration is one unit
less than the actual duration of the fragmented movie, as explained below:
mehd.fragment_duration is computed by scaling the end timestamp of
the last frame of the movie in (in nanoseconds) by the movie timescale.
In some situations, the end timestamp is innacurate due to lossy conversion to
fixed point required by GstBuffer upstream.
Take for instance a movie with 3 frames at exactly 3 fps.
$ gst-launch-1.0 -v videotestsrc num-buffers=3 \
! video/x-raw, framerate="(fraction)3/1" \
! x264enc \
! fakesink silent=false
dts: 999:59:59.333333334, pts: 1000:00:00.000000000, duration: 0:00:00.333333333
dts: 999:59:59.666666667, pts: 1000:00:00.666666666, duration: 0:00:00.333333334
dts: 1000:00:00.000000000, pts: 1000:00:00.333333333, duration: 0:00:00.333333333
The end timestamp is calculated by qtmux in this way:
end timestamp = last frame DTS + last frame DUR - first frame DTS =
= 1000:00:00.000000000 + 0:00:00.333333333 - 999:59:59.333333334 =
= 0:00:00.999999999
qtmux needs to round this timestamp to the declared movie timescale, which can
ameliorate this distortion, but it's important that round-neareast is used;
otherwise it would backfire badly.
Take for example a movie with a timescale of 30 units/s.
0.999999999 s * 30 units/s = 29.999999970 units
A round-floor (as it was done before this patch) would set fragment_duration to
29 units, amplifying the original distorsion from 1 nanosecond up to 33
milliseconds less than the correct value. The greatest distortion would occur
in the case where timescale = framerate, where an entire frame duration would
be subtracted.
Also, rounding is added to tkhd duration computation too, which
potentially has the same problem.
https://bugzilla.gnome.org/show_bug.cgi?id=793959
... before the old streams is not exposed yet for MSS stream.
In case of DASH, newly configured streams will be exposed
whenever demux got moov without delay.
Meanwhile, since there is no moov box in MSS stream,
the caps will act like moov. Then, there is delay for exposing new pads
until demux got the first moof.
So, following scenario is possible only for MSS but not for DASH,
STREAM-START -> CAPS -> (configure stream but NOT EXPOSED YET)
-> STREAM-START-> CAPS (configure stream again).
In above scenario, we can reuse old stream without any stream reconfigure.
https://bugzilla.gnome.org/show_bug.cgi?id=797239
qtdemux_update_streams() is only ever called after checking
`qtdemux->streams_aware` is TRUE. There is no need to check for that
condition again.
`qtdemux->streams_aware` is only modified when the demuxer is
hard-resetted, which is mutually exclusive with demuxing, so it cannot
be modified during the call.
https://bugzilla.gnome.org/show_bug.cgi?id=797191
For 59.94 FPS, it's common to set 60000 as timescale. For that
timescale, if the audio is late by as little as 0:00:00.000016666
(definitely less than one audio sample), lateness gets rounded to 1.
Added a safeguard that allows lateness up to 1 sample with the specific
trak's timescale, to make sure that values less than e.g. one audio
sample won't break the prefill mode. What will happen in this case is
that the audio will get squeezed back to the video's timestamp, which in
practice means that the audio will be 0.000016666 seconds early (with
the patch).
https://bugzilla.gnome.org/show_bug.cgi?id=797133
This patch clears the sample table whenever the demuxing of a new
fragment begins. This avoids increasing memory usage for long videos.
This behavior was already present when upstream_format_is_time; this
patch extends it to all push mode operation (e.g. Media Source
Extensions).
https://bugzilla.gnome.org/show_bug.cgi?id=796899
* When receiving a segment in TIME, use that seqnum
* Only reset the stored sequence number when doing HARD reset
(and not when we get a FLUSH event from upstream)
This patch aims at fixing the recent regressions in the adaptive test
suite.
All segment pushing in push mode is now done with
gst_qtdemux_check_send_pending_segment(), which is idempotent and
handles both edit lists cases and cases where the upstream TIME segments
have to be sent directly.
Fragmented files that start with a non-zero tfdt are also taken into
account, but their handling has been vastly simplified: now they are
handled as implicit default seeks so there is no need to extend the
GstSegment formulas as was being done before.
qtdemux->segment.duration is no longer modified when
upstream_format_is_time, respecting in this way the durations provided
by dashdemux and fixing bugs in reverse playback tests where mangled
durations appeared in the emitted segments.
https://bugzilla.gnome.org/show_bug.cgi?id=752603
Upstream driving elements such as dashdemux often do reverse playback by
feeding qtdemux with the fragments containing the requested playback
range in reverse order.
But the requested playback range stop may be somewhere in the
middle of a fragment. In that case, a naive pts >= segment.stop
condition may declare end of segment prematurely when demuxing this
first fragment.
This used not to happen because there were places in moov parsing where
segment.stop was overwritten to GST_CLOCK_TIME_NONE even if
upstream_format_is_time -- resulting in this case in a segment with rate
< 0 and stop == -1 and hence not triggering the EOS check, but that was
likely an accident.
This patch modifies the EOS check to take this case into account, not
sending EOS when upstream_format_is_time if rate < 0.
This fixes adaptive.dash.playback.seek_end_live.DASHIF_livestream_testpic_2s
https://bugzilla.gnome.org/show_bug.cgi?id=752603
Sample table based segment event (genereted by qtdemux) could break
presentation timeline. For example, qtdemux should not modify upstream
time format segment (e.g., adaptivedemux use case)
https://bugzilla.gnome.org/show_bug.cgi?id=796480
This field is actually only informatory and the user can potentially
choose something else. EME tests in WebKit testsuite actually doesn't
take it into and force another encryption system to be used, and expects
to be given the occasion to do so.
This basically also reverts 3e063703b3.
Instead of always keeping a safe segment (start=0) event from the beginning,
delay the creation of this event to when we really know the timestamp of the
first sample. This is important to properly start fragmented streams that
we might join in the middle or to play isolated fragment files that might
have an advanced tfdt.
https://bugzilla.gnome.org/show_bug.cgi?id=752603
Fragmented files often use elst.duration=0 which before
ee78825eae was wrongly interpreted as
having no frames.
Since that issue has now been fixed, there is no reason to disable edit
lists in fragmented files. This commit enables them, therefore producing
correct stream time for files containing edit lists.
https://bugzilla.gnome.org/show_bug.cgi?id=793058
Since ca068865c3 the duration of the first
frame is not used for estimating the frame rate.
For this purpose, stream->first_duration was initialized with the
duration of the first frame. In fragmented files, this was previously
done by peeking the first moof, but that can only be done in pull mode.
Fortunately, we don't really need to do that, at least with the current
design: When we are estimating the frame rate we already have the
sample table, regardless of the scheduling mode and whether the file is
fragmented or not, so we can obtain first_duration there much more
reliably.
This fixes frame rate estimation for fragmented files in push mode.
https://bugzilla.gnome.org/show_bug.cgi?id=796384
Whenever got new moov or new stream-start,
demux will try to expose new pad by following rule.
Comparing stream-id in the current moov with previous one, then
* If matched stream-id is found from previous one,
reuse existing pad (most common case)
* Otherwise, expose new pad with new stream-start
* No more used stream will be freed
https://bugzilla.gnome.org/show_bug.cgi?id=684790
Whenever demux got moov, demux will create new stream. Only exception is
duplicated track-id in a moov box. In that case the first stream
will be accepted. This patch is pre-work for rework of moov handling.
https://bugzilla.gnome.org/show_bug.cgi?id=684790
Supports CEA 608 and CEA 708 CC streams
Also supports usage in "Robust Prefill" mode if the incoming caption
stream is constant (i.e. there is one incoming CC buffer for each
video frame).
https://bugzilla.gnome.org/show_bug.cgi?id=606643
gst_qt_mux_can_renegotiate () gets called everywhere following
that pattern:
return gst_qt_mux_can_renegotiate (ref(self));
This means the reference must be released both in the success
and failure cases, it was only done in the success case.
Corrupted files could potentially have multiple cdat/cdt2 atoms in
a sample entry, which is unclear how to handle.
Ignore repeated ones.
CID #1434162
CID #1434159
The value stored in cenc_aux_sample_count wasn't in sync with the
parsing code that followed which checks whether all entries are
valid and present.
Only write the actual sample count when we know for sure.
CID #1427087
The samples table is sorted by DTS, not PTS. As such we can only get the
correct result when using a binary search on it, if we search for the
DTS.
Also if we only ever search for the frame, where the following frame is
the first one with a PTS after the search position, we will generally
stop searching too early if frames are reordered.
In forwards playback this is not really a problem (after the decoder
reordered the frames, clipping is happening), in reverse playback
it means that we can output one or more frames too few as we stop too
early and the decoder would never receive it.
https://bugzilla.gnome.org/show_bug.cgi?id=782118
The smallest possible is 24 (and not 25) bytes.
The last "name" field can according to QTFF specifications not be present
at all. The parser will handle this fine and so will the rest of
the qtdemux code.
If codec_data is changed, the stream is no longer valid.
Rather than keeping running when refusing new caps,
this patch send a warning to the bus.
Also fix up splitmuxsink to ignore this warning while changing caps.
https://bugzilla.gnome.org/show_bug.cgi?id=790000
It generally makes not much sense to configure it for all pads/traks at
once as this value is usually different for each of them. As such, add a
new property on the pads in addition to the existing property on the
whole muxer.
https://bugzilla.gnome.org/show_bug.cgi?id=792649
If we saw empty segments, we previously unconditionally pushed a
GAP event downstream regardless of the duration of that empty
segment.
In order to avoid issues with initial negotiation of downstream elements
(which would negotiate to something before receiving any data due to
that initial GAP event), check if there's at least a second of difference
(like we do for other GAP-related checks in qtdemux) before
deciding to push a GAP event downstream.
If a reserved-max-duration is set, we should always track
and update the reserved-duration-remaining estimate, even
if we're not sending periodic moov updates downstream for
full robust muxing.
It is possible that the mdat has more data than what was stored in the
headers file. If we put that to the output the file will have bogus data
at the end and some players will complain.
https://bugzilla.gnome.org/show_bug.cgi?id=784258
qtdemux.c: In function ‘gst_qtdemux_configure_stream’:
qtdemux.c:7764:34: error: suggest parentheses around ‘&&’ within ‘||’ [-Werror=parentheses]
if ((stream->n_samples == 1) && (stream->first_duration == 0)
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid computing frame rate when a stream contain moof with only one
sample, to avoid an assert. The moof is considered as still picture.
The same is already done for one sample given in the moov.
https://bugzilla.gnome.org/show_bug.cgi?id=782217
... which no longer worked due to unconditionally clearing sample info and
ending up in inconsistent state. Let's tread a bit more carefully and also
allow for the old seek handling that resorts to scanning if no mfra info
is available.
The last entry will most likely get new samples added to it in "robust"
muxing mode, changing the samples_per_chunk and thus making it wrong to
keep the last two entries merged. It will run into an assertion later
when adding a new sample to the chunk.
Thanks to gdiener@cardinalpeak.com for the analysis of the bug and
proposal for a solution.
Timecode trak is only supported for mov right now, not for mp4. That
code would otherwise create an invalid trak if the muxed video contained
timecode metadata.
https://bugzilla.gnome.org/show_bug.cgi?id=782684
We only accept new caps if they are basically the same. We don't want to
reset anything as if the caps are new, otherwise various state could get
out of sync with the current run.
We have some padding added after the initial moov, so a bigger updated
moov can be handled to some degree and is expected. Previously we just
ignored the padding and errored out in cases when the padding would've
just been enough.
This sets up a moov with the correct sample positions beforehand and
only works with constant framerate, I-frame only streams.
Currently only support for ProRes and raw audio is implemented but
adding new codecs is just a matter of defining appropriate maximum frame
sizes.
https://bugzilla.gnome.org/show_bug.cgi?id=781447
When muxing raw audio, we have no way of storing timestamps but are just
storing a continuous stream of audio samples. If the difference between
the expected and the real timestamp becomes to big, we should error out
instead of silently creating files with wrong A/V sync.
https://bugzilla.gnome.org/show_bug.cgi?id=780679
In push mode we process as much as possible in the adapter. When we receive
a DISCONT buffer which we can't match to an actual sample (based on the existing
sample table) and there is still data remaining in the incoming adapter,there is
one of two cases happening:
1) We are doing reverse playback, in which case we should flush out all pending
data
2) We have leftover data from the previous incoming buffer... which we can't do
anything about.
For the second case, make sure we flush out the remaining data so that we can start
parsing again from scratch.
https://bugzilla.gnome.org/show_bug.cgi?id=781319
They should have ideally the same timescale of the video track, which we
can't guarantee here as in theory timecode configuration and video
framerate could be different. However we should set a correct timescale
based on the framerate given in the timecode configuration, and not just
use the framerate numerator.
Make sure offset and neededbytes are properly resetted when all
streams are EOS in push-mode.
Avoids cases when some data might still be pushed by upstream (because
it didn't yet see the resulting GST_FLOW_EOS yet) and qtdemux gets
completely lost.
https://bugzilla.gnome.org/show_bug.cgi?id=781266
buf is the current pad->last_buf value. If ever it gets copied/unreffed,
we need to make sure to write back the new pointer to the last_buf
variable.
Fixes using wrong pointer values in the case of decrasing DTS value
Before pushing a sample, check if there was a change in the current
stsd entry. This patch also assumes that the first stsd entry is
used as default for the first sample. It might cause an uneeded
caps renegotiation when this isn't the case.
