... rather than from bits per sample, since spec states values are already
left justified w.r.t. bits per sample but not w.r.t. bytes per sample
(and so the latter determines the normalization, or indicated depth).
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered. Fix warnings that gtk-doc points out.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_reset),
(gst_wavpack_enc_push_block), (gst_wavpack_enc_chain):
* ext/wavpack/gstwavpackenc.h:
Handle non-zero start timestamps and stream discontinuities
correctly. This only has an effect if we're muxing into
a container format as the raw WavPack stream must contain
continous sample numbers.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_index_entry_new),
(gst_wavpack_parse_index_entry_free),
(gst_wavpack_parse_base_init),
(gst_wavpack_parse_index_append_entry), (gst_wavpack_parse_reset):
Use GSlice for allocating index entries and use
gst_element_class_set_details_simple().
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_sink_set_caps):
Remove workaround for bug #421543. This is fixed in core 0.10.13 and
not necessary anymore as we need at least that core version.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_set_property), (gst_wavpack_enc_get_property):
Specify and use properties as unsigned int that are an unsigned int.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_set_property), (gst_wavpack_enc_get_property):
* ext/wavpack/gstwavpackenc.h:
Fixup docs, make the bitrate property an int as it should be and
allow to set the different extra processing modes instead of only
allowing none and the default one.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c:
Add missing audioconverts in the example pipelines of wavpackenc. As
the wavpack stuff now needs input with 32 bit width (and random depth)
this is needed now. The example pipelines for the parser and decoder
are still fine.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_reset),
(gst_wavpack_dec_init), (gst_wavpack_dec_sink_set_caps),
(gst_wavpack_dec_clip_outgoing_buffer),
(gst_wavpack_dec_post_tags), (gst_wavpack_dec_chain):
* ext/wavpack/gstwavpackdec.h:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_reset),
(gst_wavpack_enc_sink_set_caps), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_chain):
* ext/wavpack/gstwavpackenc.h:
* ext/wavpack/gstwavpackparse.c:
Don't play audioconvert. As wavpack wants/outputs all samples with
width==32 and depth=[1,32] accept this and let audioconvert convert
to accepted formats instead of doing it in the element for n*8 depths.
This also adds support for non-n*8 depths and prevents some useless
memory allocations. Fixes#421598
Also add a workaround for bug #421542 in wavpackenc for now...
* tests/check/elements/wavpackdec.c: (GST_START_TEST):
* tests/check/elements/wavpackenc.c: (GST_START_TEST):
* tests/check/elements/wavpackparse.c: (GST_START_TEST):
Consider the change above in the unit tests and test if the correct
caps are accepted and set. Also check for GST_BUFFER_OFFSET_END in
the wavpackparse unit test.
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_init),
(gst_wavpack_dec_sink_set_caps):
Set caps on the src pad as soon as possible.
* ext/wavpack/gstwavpackdec.h:
* ext/wavpack/gstwavpackcommon.h:
* ext/wavpack/gstwavpackenc.h:
* ext/wavpack/gstwavpackparse.h:
Fix indention. gst-indent is now called by cicl.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_push_block):
Send the new segment event in time format instead of bytes. This
allows "wavpackenc ! wavpackdec ! someaudiosink" pipelines.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Accept framed and non-framed input, wavpackparse doesn't care. To
prevent "wavpackparse ! wavpackparse ! ..." pipelines lower the
rank of wavpackparse by one. This allows "wavpackenc ! wavpackparse !
..." pipelines.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_init), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block):
* ext/wavpack/gstwavpackenc.h:
Put the write helpers into the GstWavpackEnc struct directly and not
as a pointer to save two small, but useless mallocs. This also makes
it possible to drop the finalize method.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_push_buffer):
For consistency reasons also set GST_BUFFER_OFFSET_END on the outgoing
buffers the same way wavpackenc does it.
Original commit message from CVS:
* ext/wavpack/gstwavpack.c: (plugin_init):
* ext/wavpack/gstwavpackcommon.c:
Use a general wavpack debug category for common code.
* ext/wavpack/gstwavpackstreamreader.c:
(gst_wavpack_stream_reader_set_pos_abs),
(gst_wavpack_stream_reader_set_pos_rel),
(gst_wavpack_stream_reader_write_bytes):
Use the general wavpack debug category here too and add debug
output to the functions that should not be called at all by
the wavpack library.
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_plugin_init):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_plugin_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Change debugging category names to conform to the conventions.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type):
Minor clean-up: use enum values instead of hardcoded constants (#395536).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_reset),
(gst_wavpack_dec_init), (gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init),
(gst_wavpack_enc_class_init), (gst_wavpack_enc_reset),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_change_state):
* ext/wavpack/gstwavpackparse.c:
Some small clean-ups: use enums instead of hard-coded numbers,
const-ify element details, re-factor some code into _reset()
functions (#352605).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* configure.ac:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config):
Fix enum nicks; only emit no-more-pads once; add support for very
fast encoding mode in upcoming 4.40.0 release (#369539).
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_create_src_pad):
* gst/nuvdemux/gstnuvdemux.c: (gst_nuv_demux_create_pads):
* tests/check/elements/wavpackparse.c: (wavpackparse_found_pad):
Activate pads before adding them to running element.