Commit graph

270 commits

Author SHA1 Message Date
Jan Schmidt
3a3c80e7be mpegtsmux: Respect the start-time-selection property.
Use the start time provided by the aggregator base class for output
times.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2105>
2021-03-31 13:34:40 +00:00
Jan Schmidt
18a095ca63 mpegtsmux: Add PMT_%d support to prog-map.
Support a PMT_%d field in the prog-map, that's optionally used
to set the PMT for each program in the mux.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2039>
2021-03-18 15:07:53 +00:00
Jan Schmidt
5e4a11bf36 mpegtsmux: Don't write PCR until PAT/PMT are output.
Make sure streams start cleanly with a PAT/PMT and defer the first PCR
output until after that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2073>
2021-03-18 13:57:27 +00:00
Mathieu Duponchelle
b7e9e606a9 tsmux: finalize PCR timing for complete accuracy
In order to always insert a PCR packet right on time, we need to
check whether one is needed when outputting any packet, not only
a packet for the PCR stream. Most of the PCR packets will remain
data-carrying packets, but as a last resort we may insert stuffing
packets on the PCR stream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2073>
2021-03-18 13:57:27 +00:00
Jan Schmidt
3201575d2a mpegtsmux: Improve PCR/SI scheduling.
Change PCR / SI scheduling so that instead of checking if
the current PCR is larger than the next target time, instead
check if the PCR of the next packet would be too late, so PCR
and SI are always scheduled earlier than the target, not later.

There are still cases where PCR can be written too late though,
because we don't check before each output packet.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2073>
2021-03-18 13:57:27 +00:00
Jan Schmidt
49c61338d6 tsmuxstream: Fix comment typo
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2073>
2021-03-18 13:57:27 +00:00
Vivia Nikolaidou
82dcb27401 basetsmux: Don't send the capsheader if src pad has no caps
That means we're shutting down, so there's no point in the streamheader
being sent

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1864>
2020-12-09 13:14:40 +00:00
Jan Alexander Steffens (heftig)
5a1b56a0e0 mpegtsmux: Restore intervals when creating TsMux
Otherwise the settings from the properties would be overwritten with
the defaults.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1593>
2020-09-23 16:50:34 +00:00
Jan Alexander Steffens (heftig)
66f9d37c37 mpegtsmux: Make handling of sinkpads thread-safe
Ensure we take the object lock while accessing `GstElement.sinkpads`.
Use an iterator when the code isn't simple to avoid deadlock.

When we find the best pad, take a reference so a concurrent pad
release doesn't destroy the pad before we're done with it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1553>
2020-09-09 02:25:40 +00:00
Edward Hervey
1068083135 mpegtsmux: Don't create streams with reserved PID
There are quite a few reserved PID in the various MPEG-TS (and derivate)
specifications which we should definitely not use. Those PID have a certain
meaning and purpose.

Furthermore, a lot of the code in the muxer implementation also makes assumption
on the purpose of streams based on their PID.

Therefore, when requesting a pad with a specific PID, make sure it is not a
restricted PID.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1561>
2020-09-08 21:09:36 +00:00
Jan Alexander Steffens (heftig)
ef8142ef90 mpegtsmux: Keep mux usable after stop
Otherwise you cannot request new pads until after it is started again.

gst_base_ts_mux_reset with FALSE is still called in the dispose
implementation, so the muxer still gets deallocated when we actually
clean up.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1552>
2020-09-01 14:01:56 +00:00
Vivia Nikolaidou
d8b37973d2 tsmux: Fix PCR calculation for CBR live streams
Take the first ever timestamp as an offset

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1431>
2020-07-28 16:18:45 +00:00
Jan Alexander Steffens (heftig)
5a358b7687 tsmux: Refactor get_current_pcr
No functional change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1431>
2020-07-28 16:18:45 +00:00
Mathieu Duponchelle
13376f88fe basetsmux: make use of gst_aggregator_finish_buffer_list
Fixes #1276

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1429>
2020-07-10 20:12:11 +00:00
Andreas Frisch
0e075b4dbf mpegtsmux: Don't assume English for ISO-639 language descriptor
Previously, "en" (should have actually been "eng") was assumed
for the ISO-639 language descriptor if no language was explicitely given.
Neither ETSI EN 300 468 nor ATSC A/52 mandate for a language descriptor,
so we should simply not set it, if it's unknown.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1386>
2020-07-08 13:37:12 +00:00
Jan Schmidt
46cc64e09f mpegtsmux: Fix handling of MPEG-2 AAC
The audio/mpeg,mpegversion=2 caps in GStreamer refer to
MPEG-2 AAC (ISO 13818-7), not to the extended MP3 (ISO 13818-3),
which is audio/mpeg,mpegversion=1,mpegaudioversion=2/3

Fix the caps, and add handling for MPEG-2 AAC in both ADTS and raw
form, adding ADTS headers for the latter.
2020-07-08 12:24:13 +00:00
Jan Alexander Steffens (heftig)
cba9ba9b38 mpegtsmux: Avoid crash releasing pad with NULL prog
If we release a pad while the muxer is running which has never been used
for aggregation (thus it does not have an assigned program), `prog` is
NULL.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1411>
2020-07-07 14:05:04 +02:00
Andreas Frisch
297e5022ca mpegtsmux: Correctly set ISO-639 language descriptor
fixes #1340
Only 2 of the necessary 3 letters were copied because the teminating '\0'
needs to be counted, too - cf.
https://developer.gnome.org/glib/stable/glib-String-Utility-Functions.html#g-strlcat

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1375>
2020-06-30 11:41:27 +00:00
Mathieu Duponchelle
6baffc2931 docs: mark more types as plugin API 2020-06-23 12:10:17 -04:00
Mathieu Duponchelle
a048ce81d4 plugins: uddate gst_type_mark_as_plugin_api() calls 2020-06-06 00:40:42 +02:00
Sebastian Dröge
74f2f733be plugins: Use gst_type_mark_as_plugin_api() for all non-element plugin types 2020-06-04 13:33:16 -04:00
Alex Hoenig
0a2e026985 mpegtsmux: detect and ignore gap buffers
Fixes #1291.  Without this, when a stream has gaps and then resumes, the next buffer PTS that is written to the TS is given the PTS of the first gap.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1263>
2020-05-12 12:18:28 -04:00
Sebastian Dröge
5394269c91 mpegtsmux: Chain up pad dispose function to the one of the parent class
Otherwise we will leak various memory.
2020-04-15 09:07:24 +00:00
Sebastian Dröge
b41ed0fbb0 mpegtsmux: Properly release requests pads by chaining up to aggregators function 2020-04-15 09:07:24 +00:00
Vivia Nikolaidou
fecd38c8f6 tsmux: Ability for streams to disappear and reappear
Until now, any streams in tsmux had to be present when the element
started its first buffer. Now they can appear at any point during the
stream, or even disappear and reappear later using the same PID.
2020-04-15 09:07:24 +00:00
Edward Hervey
d8a51c6097 atscmux: Add missing break in switch
CID: 1455515
2019-11-27 15:41:26 +01:00
Kyrylo Polezhaiev
6af38c6ffe tsmux: Fix copying of buffer region 2019-11-18 07:31:33 +00:00
Aaron Boxer
6892078b00 basetsmux: allow null J2K profile
Since we are not requiring that profile equals GST_JPEG2000_PARSE_PROFILE_BC_SINGLE,
(as the standard requires) we can allow profile to be null. We relax this condition because
OpenJPEG can't create broadcast profiles.
2019-11-05 21:21:51 +00:00
Aaron Boxer
6d3429af34 documentation: fixed a heap o' typos 2019-11-05 09:11:25 -05:00
Edward Hervey
ef16d7558f mpegtsmux: Add SCTE-35 support
This adds two properties:
* scte-35-pid: If not 0, enables the SCTE-35 support for the current
  program. This will write the proper PMT and send SCTE-35 NULL
  commands (i.e. heartbeats) at a regular interval
* scte-35-null-interval: This specifies the interval at which the
  NULL commands should be sent

Sending SCTE-35 commands is done by creating the appropriate SCTE-35
GstMpegtsSection and then sending them on the muxer. See the
associated example
2019-10-31 12:31:27 +00:00
Edward Hervey
5464775aef tsmux: Disable bluray-isms from PMT
We were unconditionally adding top-level descriptors in the PMT which
were only related to bluray support for PS3 (from 10 years ago).

These should be re-added conditionally
2019-10-31 12:31:27 +00:00
Tim-Philipp Müller
f218ec2794 Remove autotools build system 2019-10-14 13:54:27 +01:00
Mathieu Duponchelle
61a7707eca atscmux: fix AC-3 stream id
According to ATSC A/52, Annex A, section 4.2:

The value of stream_id in the PES header shall be 0xBD
(indicating private_stream_1)
2019-08-13 21:36:06 +00:00
Mathieu Duponchelle
73f92371b8 basetsmux: expose pcr-interval property
Instead of using a static hardcoded PCR interval, allow the user
to configure it.

Also revert back the default to a 40 ms interval, that was changed
in recent patches for no good reason.
2019-07-31 15:54:13 +02:00
Mathieu Duponchelle
9996ae9ae0 tsmux: output smoothly increasing PTS when in CBR mode
Thanks to that, when its output is plugged into eg a udp sink, the
outgoing data can be output in a smoother way, reducing burstiness
2019-07-04 23:28:42 +00:00
Seungha Yang
1c99c37548 tsmuxstream: Do not try return from void function
../subprojects/gst-plugins-bad/gst/mpegtsmux/tsmux/tsmuxstream.c(1082): warning C4098:
  'tsmux_stream_get_es_descrs': 'void' function returning a value
2019-07-04 19:43:42 +09:00
Seungha Yang
00b2b599d6 mpegtsmux: Remove white space 2019-07-04 19:42:48 +09:00
Mathieu Duponchelle
f5495700fb basetsmux: don't reset pad on flush_stop
This was mistakenly added when porting to aggregator, this
restores the old behaviour, by only resetting them when the
muxer itself is reset
2019-05-30 17:20:49 +02:00
Mathieu Duponchelle
1e72aa6e85 basetsmux: fix send_event by chaining up 2019-05-30 17:20:12 +02:00
Mathieu Duponchelle
02ded087a4 mpegtsmux: add SECTION comment
We include an example for injecting sections in the transport
stream in the documentation
2019-05-30 13:53:05 +00:00
Mathieu Duponchelle
76c3d98962 basetsmux: preserve user-specified sections across resets
As sections can be provided by the user through send_event
when the element state is NULL, their lifetime is expected
to match that of the muxer, and they must be preserved when
the state changes
2019-05-30 13:53:05 +00:00
Mathieu Duponchelle
fdfd4600c1 atscmux: send empty RRT / MGT / STT tables
These are mandated by A/65, their absence gets flagged by
stream analyzers. Users can of course provide filled up
versions through the send_event API.
2019-05-30 13:53:05 +00:00
Mathieu Duponchelle
5d41740ff6 tsmux: maintain packet counters in a global array
We can have multiple TsMuxPacketInfo objects for the same PID
with user-provided sections, for example ATSC requires multiple
tables with the same PID.
2019-05-30 13:53:05 +00:00
Seungha Yang
1e3eb00b17 mpegtsmux: Fix build warning error
gstmpegtsmux.c:291:3: error: implicit declaration of function ‘memmove’ [-Werror=implicit-function-declaration]
   memmove (map.data + 4, map.data, map.size - 4);
   ^
gstmpegtsmux.c:291:3: error: incompatible implicit declaration of built-in function ‘memmove’ [-Werror]
gstmpegtsmux.c:291:3: note: include ‘<string.h>’ or provide a declaration of ‘memmove’
2019-05-20 19:34:37 +09:00
Mathieu Duponchelle
54cb25456d basetsmux: improve bitrate property documentation 2019-05-19 19:40:48 +00:00
Mathieu Duponchelle
9190541e3c tsmux: refactor logic for when to (re)transmit tables
In order to output them at regular intervals in the bitstream
when a bitrate is specified.
2019-05-19 19:40:48 +00:00
Mathieu Duponchelle
52efb62876 basetsmux: fix PCR stream selection 2019-05-19 19:40:48 +00:00
Jan Schmidt
1ff72bb69d Fix compile after aggregator rewrite and base class refactor 2019-05-19 19:40:48 +00:00
Mathieu Duponchelle
3c7c08e7c4 tsmux: fix continuity counter for packets with no payload 2019-05-19 19:40:48 +00:00
Mathieu Duponchelle
a1cadd11b8 mpegtsmux: aggregator port 2019-05-19 19:40:48 +00:00