Far enough here means more than 500ms or 4 times the average keyframe
download time. There is no need to jump ahead by one average keyframe
download time in this case.
This makes playback smooth if the network is fast enough.
When dealing with key-unit trick mode downloads, the goal is to
provide the best "Quality of Experience". This is achieved by:
1) maximizing the number of frames displayed per second
2) avoiding "stalling" as much as possible (i.e. not downloading and
decoding frames fast enough)
This implementation achives this by:
1) Knowing very precisely the current keyframe being download (i.e
more accurate than at the fragment level which might contain more
than one keyfram). This is the new "actual_position" variable
introduced by this commit
2) Knowing the position of downstream (provided by QoS and stored
in the adaptivedemuxstream qos_earliest_time variable)
3) Knowing how long it takes to request and fully download a keyframe
(the average_download_time variable)
Taking those 3 variables into account, whenever a keyframe has been
pushed downstream we calculate a "target time" (target_time variable)
which is the ideal next keyframe time to request so that:
1) It will be requested/downloaded/demuxed/decoded in time to be
displayed without being too late
2) It will not be too far ahead that it would cause too few frames
per second to be displayed.
How far ahead we will request is inversily proportional to how close
the actual position (actual_position) is from the downstream
position (qos_earliest_time). The more is buffered between the source
and the sink, the "closer" the target time will be, and therefore
the more frames per seconds will be displayed (up to the limit
of keyframes_per_second * absolute_rate).
If a manifest has non-zero presentation time offset
(i.e., earliest presentation time specified by sidx box is not zero),
the initial sidx position shouldn't be zero. Since we cannot define
exact sidx position until parsing sidx box, set the value to unknown.
https://bugzilla.gnome.org/show_bug.cgi?id=782693
The previous code was handling both as separate steps and then tried to
combine the results, but this resulted in all kinds of bugs which showed
themselves as failures during seeking and offset tracking getting wrong.
This also showed itself with gst-validate on the sample stream.
The rewritten code now parses everything in one go and tracks the
current offset only once, and as a side effect simplifies the code a
lot.
Also added is detection of SIDX that point to other SIDX instead of
actual media segments, e.g. with this stream:
http://dash.akamaized.net/dash264/TestCases/1a/sony/SNE_DASH_SD_CASE1A_REVISED.mpd
Support for this will have to be added at some point but that should
also be easier with the rewritten code.
https://bugzilla.gnome.org/show_bug.cgi?id=781233
Spec 5.3.9.2 is saying about the existence of duration and SegmentTimeline
only for Representation level. Other level such as Period or AdaptationSet
might not have the attributes.
https://bugzilla.gnome.org/show_bug.cgi?id=780570
This reverts commit c9fbf3459a.
The representation ID comparision here was wrong and triggering always
if the ID did *not* change, causing needless redownloading of the
header. The sample stream provided in the bug does not exist anymore.
Otherwise we'll get into an infinite loop here. Now this is still not
correct and will cause a clean error, but at least it won't hang forever
anymore.
For each period, media presentation is the relative to the
period-start time. So SIDX seek position should be target seek
position minus period-start. Also, if presentationTimeOffset
is defined, the value should be compensated
https://bugzilla.gnome.org/show_bug.cgi?id=780397
Instead of just going to the first or last fragment, report if we're
going outside the index. This should never happen unless there's a bug
or the stream is broken.
Allow some possibility for inaccuracies here though.
There is no guarantee that the index positions are the same between
representations, and assuming this easily causes us to get into invalid
index positions.
If a MPD is On-Demand profile and no index described, demux will terminate
download loop after parsing inband SIDX with flow return custom-success.
At this moment, SIDX index is excat target position, but finish_fragment()
might cause re-advancing subfragment depending on MPD structure.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
SIDX's base offset (i.e., byte offset of SIDX + sidx.first_offset)
mostly vary as per fragment. Also, target SIDX index must be zero for the
new fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
Try to find fragment using MPD first, then do refinement to find
target subframgnet using SIDX if possible. Note that, if target fragment
was moved from the previously activated one, we should assume that
the last SIDX is invalid for new fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
SIDX based playback is not restricted to SegmentBase, but it possible
with SegmentList/SegmentTemplate. In the latter case, each fragment
has its own SIDX box and might be subdivided into subfragment.
So, demux should not assume that the end of subfragment is the end
of stream. Moreover, should try advance subfragment only if there
are remaining subfragments.
With additional fixes by Sebastian Dröge <sebastian@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776200
When MPD@suggestedPresentationDelay is not present in the MPD,
dashdemux can provide default suggestedPresentationDelay. However
when applying default value of suggestedPresentationDelay, the value
should be subtracted from current time, not added to it. When streams
setup is performed and live point is calculated, we have to go to the
wall clock (current time) minus suggestedPresentationDelay, if we tried
to start with current time plus suggestedPresentationDelay, we would
be asking for future stream, which has not yet been recorded. Also
the value needs to be converted from ms to us.
https://bugzilla.gnome.org/show_bug.cgi?id=764726
For duration queries on live streams, adaptivedemux ignores the query.
The problem then is that the query is answered by the downstream
qtdemux element, with the duration of the currently passing fragment.
This commit changes the behaviour of adaptivedemux to answer the duration
queries for live streams, returning GST_CLOCK_TIME_NONE.
https://bugzilla.gnome.org/show_bug.cgi?id=753879
Parsing SIDX box was allowed even if "indexRange" attribute does not appear
for On-Demand profile. However, actual seeking using SIDX index did not happen
since download loop keep working on.
To use SIDX index in that case, demux should try it in the next download loop.
https://bugzilla.gnome.org/show_bug.cgi?id=777394
sidx has "first_offset" syntax which represents the distance in bytes
from anchor point to media fragment. If present, we should adjust
sidx_base_offset.
https://bugzilla.gnome.org/show_bug.cgi?id=776431
Previous patch allows sidx box parsing from incoming buffers.
Since the incoming buffer boundary might be over sidx box,
there can be remaining buffer in isobmff parser adapter.
https://bugzilla.gnome.org/show_bug.cgi?id=776352
The way how strchr() was called here, it could easily read after the end
of the string. Use g_ascii_isspace() instead.
Detected by asan in the unit test.
We set it to TRUE here, but later we set it to TRUE again anyway if the
parsing actually succeeded at this point. Let's keep the second one.
CID 1374360.
Section 5.3.3 in ISO/IEC 23009-1:2014 defines that invalid references
(e.g., invalide URI or cannot be resolved) specified by "@xlink:href" attribute
shall be removed. That means, we should play it without error,
and just ignore the corresponding element.
It's similar to "urn:mpeg:dash:resolve-to-zero:2013".
https://bugzilla.gnome.org/show_bug.cgi?id=774463
External xml could have empty, one or multiple top-level "Period" elements.
Because xml parser cannot parse the multiple top-level elements
(i.e., no root element), we need to wrap a xml in order to make root element.
See also ISO/IEC 23009-1:2014 5.3.2.2
https://bugzilla.gnome.org/show_bug.cgi?id=774357
PlayReady being the one of the few DRM formats encoding its data with
base64 it was not consistent to have a special case for this. So the
base64 decoding operation now needs to be done by the protection event
consumer, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=774112
With MSVC, this gives the following warning:
warning C4305: 'function': truncation from 'double' to 'gfloat'
Apparently, MSVC does not figure out what type to use for constants
based on the assignment. This warning is very spammy, so let's try to
fix it.
And scale the bitrate with the absolute rate (if it's bigger than 1.0) to get
to the real bitrate due to faster playback.
This allowed in my tests to play a stream with 10x speed without buffering as
the lowest bitrate is chosen, instead of staying/selecting the highest bitrate
and then buffering all the time.
It was previously disabled for not very well specified reasons, which seem to
be not valid anymore nowadays.
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Matej Knopp <matej.knopp@gmail.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
We don't have to do yet another additional request but can just download the
data directly.
Also unify the key-unit only mode buffer pushing and extract it into its own
function now that it became more complicated.
https://bugzilla.gnome.org/show_bug.cgi?id=741104
We need to mark every first buffer of a key unit as discont, and also every
first buffer of a moov and moof. This ensures that qtdemux takes note of our
buffer offsets for each of those buffers instead of keeping track of them
itself from the first buffer. We need offsets to be consistent between moof
and mdat
https://bugzilla.gnome.org/show_bug.cgi?id=741104
This reverts commit 947656cfd2.
This makes all dash seeking tests fail. Needs more testing to fully understand
what's going wrong. Revert ok'd by Sebastian
We don't need to call the latter at all as we're definitely in this period and
the segment is selected via the SIDX.
This is especially important when doing SNAP seeks, as otherwise we would
always start from the beginning of the period (usually 0) again.
