Original commit message from CVS:
* gst/playback/gstplaybin2.c: (notify_source_cb), (activate_group):
Disconnect signal handlers before destroying a previous decodebin so
that we don't end up causing deadlocks. Fixes#566586.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (no_more_pads_cb):
Add some debug info.
* gst/playback/gstplaysink.c: (gen_video_chain), (gen_audio_chain),
(gst_play_sink_reconfigure), (gst_play_sink_request_pad),
(gst_play_sink_release_pad):
Add some more debug info.
Reconfigure the audio chain when we switch between raw and encoded audio
in gapless playback.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_finalize):
Free the factory array when finalizing.
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_base_init):
Use a GstStaticPadTemplate since the src pad caps are fixed.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gen_audio_chain),
(gst_play_sink_reconfigure):
Add some more debug info.
Fix linking of just an encoded sink.
Handle failure to create a sink chain more gracefully than crashing.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (pad_added_cb):
Error out with a missing-plugin error when the input-selector was not
found.
* gst/playback/gstplaysink.c: (gst_play_sink_reconfigure):
Indentation.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_class_init),
(gst_play_sink_dispose), (gst_play_sink_finalize), (try_element),
(gen_video_chain), (gen_audio_chain), (gst_play_sink_reconfigure),
(gst_play_sink_send_event), (gst_play_sink_change_state):
Use G_DEFINE_TYPE.
Try to set the selected sink to READY before using it. This will allow
for detection of incompatible formats sooner.
Don't cause a fatal error when conversion elements are missing but post
a missing-element message and a warning instead because things might
still link and run fine.
Simplyfy the construction of audio and video sink chains.
Original commit message from CVS:
* gst/playback/gstdecodebin.c:
* gst/playback/gstdecodebin2.c:
Add basic docs to decodebin and link to decodebin from decodebin2.
Original commit message from CVS:
* gst/playback/gstplaybin2.c:
Add notification of current stream. Add ability to configure buffer
sizes.
* gst/playback/gsturidecodebin.c:
Add ability to configure buffer sizes for streaming mode.
Bug #561734.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gen_audio_chain):
Don't post an error when we can't configure the volume but post a
warning instead. Fixes#561780.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
If the top-level type of the stream is plain text, don't try to decode
it, matching behaviour of decodebin.
* gst/playback/gstplaysink.c:
If we fail to generate a text chain (e.g. due to missing optional
plugins), don't crash.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (deactivate_group):
don't try to unlink the selector sinkpad when we don't have it yet. This
can happen if an error occured before the group was complete.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (activate_group):
Catch state change errors and stop from the uridecodebin elements
instead of trying to continue in vain.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_reconfigure):
Don't try to do crazy things when we only have a text pad without a
video pad. Fixes#559478.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_pad_activate):
Remove bogus assert, the decodepad could have been created inside an
already existing group.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin2.c (expose_pad): Fix typo: unset
target instead of setting it.
(gst_decode_pad_activate, gst_decode_pad_unblock): This is now the
API for a decode pad. The bugfix is that we set the group in
activate(), not when the pad was created because it might be NULL
then.
(gst_decode_group_control_source_pad, gst_decode_group_expose):
Update to use the API.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin2.c (struct _GstDecodePad): Change to
be a subclass of GstGhostPad.
(analyze_new_pad): So, when emitting the signals that determine
how we do autoplugging, already create the ghost pad and use it as
the pad in the signal arguments. This allows applications to make
a connection between the pad passed in e.g. autoplug-continue, and
the pad passed in new-decoded-pad.
(connect_pad, expose_pad): Update to receive the ghosted decode
pad in the args, retargetting it as necessary if we have to plug
the target pad through a multiqueue.
(gst_decode_group_control_source_pad): Adapt to receive an
already-ghosted pad that just needs activation, blocking, and
drain notification.
(sort_end_pads): Adapt for decode pads actually being pads.
(gst_decode_group_expose): Adapt for decode pads actually being
pads. Rewrite the decode pad names so they appear in order. Adds a
new error case if we couldn't set the name.
(gst_decode_group_free, gst_decode_group_hide): Adapt cleanup
logic.
(gst_decode_pad_set_blocked, gst_decode_pad_add_drained_check):
New API for the decode pad, needed because we shouldn't do these
things inside gst_decode_pad_new(), but after.
(gst_decode_pad_new): Change to actually make the real pad, and
delay the blocking/drainage bits.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (selector_blocked), (pad_added_cb),
(no_more_pads_cb):
Fix nasty race where multiple decodebins could start pushing data before
we manage to configure the sinks, resulting in not-linked errors in
typical RTSP streaming cases.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Fix property doc markup (its not a signal).
* sys/xvimage/xvimagesink.c:
Add since tag for new proeprties (also add sice tags fro the last two
other additions).
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c:
* gst/playback/gststreamselector.c:
First stab at integrating DVD subpicture overlay into
playbin. Successfully plugs and plays, but the queues need
shrinking - 3 seconds of video is too much buffering.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_raw_queue):
And ref the pad before returning it again when linking to the queue
failed. Otherwise we will unref the pad twice later and things break.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_raw_queue):
If linking the raw pad with a queue fails, try it without a queue
instead of failing completely. This should never happen.
Original commit message from CVS:
Patch by: Evgeniy Stepanov <eugeni dot stepanov at gmail dot com>
* gst/playback/gstdecodebin.c: (add_raw_queue), (close_pad_link):
Add a queue after a demuxer if the demuxer outputs raw data. This was
done before only for non-raw data but is required in this case too.
Fixes bug #540215.
decodebin2 doesn't have this issue because all streams of a group
go through multiqueue.
Original commit message from CVS:
* gst/playback/gstplay-marshal.list:
* gst/playback/gstplaybin2.c:
Add get-video-pad, get-audio-pad, get-text-pad action signals to
playbin2. This allows the user to get to the selector's sinkpads, and
thus inspect a range of things - caps, tags, etc.
Original commit message from CVS:
* gst/playback/gstplaybin2.c:
* gst/playback/gstplaysink.c:
Fix a whole bunch of typos in comments and log statements.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
Ensure decodebin2 emits 'drained' signal once, and only once, when all
pads are drained.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_get_property),
(notify_source), (activate_group):
Implement the source property, emit notify when it changes in the
underlying uridecodebin.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Disconnect signals from decodebins we created before we remove it from
playbin, to avoid crashes if the decodebin is eventually disposed after
the playbin itself (possible if the app takes a reference on the
decodebin).
Fixes#536521.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
(gst_decode_group_control_source_pad), (gst_decode_group_expose):
Check for NULL cases and log them, creating ghostpads can, for example,
fail when the pad returns wrong caps.
* gst/playback/gstplaybin2.c: (perform_eos):
When pushing out the EOS event, collect the return value and warn when
something failed.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/playback/gstdecodebin.c: (remove_fakesink):
Lock the fakesink before setting the state to NULL and removing it from
the bin so that a concurrent state change cannot interfere.
Fixes#534331.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_class_init):
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init):
* gst/playback/gstplay-marshal.list:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_class_init):
Use correct marshallers. GstCaps are a boxed type and no GObject
subclass.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (connect_pad):
When autoplugging fails, set the element back to NULL before
unreffing it.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (set_audio_mute),
(set_active_source):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(playbin_set_audio_mute):
Allow setting -1 as current-audio to mute the current audio stream,
similar to what is done for subtitles. Fixes bug #342294.
Original commit message from CVS:
* gst/playback/test4.c:
* gst/playback/test5.c:
* gst/playback/test6.c:
* gst/playback/test7.c:
Also include config.h when relying on defines from it. Fixes the
build. Its been a please to serve :)
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (free_pad_probe_for_element),
(try_to_link_1):
If we can't activate one of the decoders we plugged in (such as,
say, musepackdec) for some reason (it might not support push mode,
for example), remove any pad probes that close_pad_link() might
have set up. This makes sure we later don't try to remove a probe
for a pad that doesn't exist any longer, and avoids nast warnings
and probably other things too.
Original commit message from CVS:
* gst/playback/test4.c:
* gst/playback/test5.c:
* gst/playback/test6.c:
* gst/tcp/gstmultifdsink.c:
Include stdlib.h and unistd.h only if the appropriate HAVE_*_H macro
is defined.
Original commit message from CVS:
* docs/design/draft-keyframe-force.txt:
Fix typo.
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_handle_src_query):
Set buffering mode in the messages.
Set buffering percent in the query.
* tests/examples/seek/seek.c: (update_fill), (msg_state_changed),
(do_stream_buffering), (do_download_buffering), (msg_buffering):
Do some more fancy things based on the buffering method in use.
