For H264, there is an extra header containing the CTS, which is a timestamp
offset that should be applied to the PTS. Parse this value and use it to adjust
the pts.
Fixes#630088
Don't send them upstream because for upstream a BYTES seek
might make sense but is completely wrong because upstream
can't seek to a byte position of the audio or video stream.
Also don't build the index in push mode for non-TIME seeks,
things will go wrong here otherwise.
Scan for needed part upon a seek as opposed to doing a complete scan
at startup, which may take some time depending on file and/or platform.
Also accept index metadata in pull mode and peek for some metadata
at the end of the file when deemed appropriate.
Original commit message from CVS:
2008-11-24 Julien Moutte <julien@fluendo.com>
* gst/flv/gstflvdemux.c: (gst_flv_demux_find_offset),
(gst_flv_demux_handle_seek_push),
(gst_flv_demux_handle_seek_pull):
Fix non key unit seeking by always going to the previous
keyframe. Mark
the discont flag when we've moved in the file.
* gst/flv/gstflvparse.c: (gst_flv_parse_audio_negotiate): MP3
streams
are parsed already, makes autoplugged pipelines shorter.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_cleanup),
(gst_flv_demux_loop), (gst_flv_demux_handle_seek_push),
(gst_flv_demux_handle_seek_pull), (gst_flv_demux_sink_event),
(gst_flv_demux_dispose), (gst_flv_demux_init):
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video), (gst_flv_parse_tag_timestamp):
Put the GstSegment directly into the instance struct instead of
allocating and free'ing it again.
Push tags already if only one pad was added, no need to wait for
the second one.
When generating our index set has_video and has_audio if we find
video or audio in case the FLV header has incorrect data.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_chain),
(gst_flv_demux_pull_tag), (gst_flv_demux_pull_header),
(gst_flv_demux_create_index):
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video),
(gst_flv_parse_tag_timestamp), (gst_flv_parse_tag_type),
(gst_flv_parse_header):
* gst/flv/gstflvparse.h:
Don't memcpy() all data we want to push downstream, instead just
create subbuffers and push them downstream.
Fix some minor memory leaks.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_loop),
(gst_flv_demux_find_offset), (gst_flv_demux_handle_seek_push),
(gst_flv_demux_handle_seek_pull):
Don't post an error message on the bus if sending EOS downstream
didn't work. Fixes bug #550454.
Fix seek event handling to look at the flags of the seek event
instead of assuming some random flags, don't send segment-start
messages when operating in push mode and push seek events upstream
if we couldn't handle them.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_create_index),
(gst_flv_demux_loop):
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video),
(gst_flv_parse_tag_timestamp):
* gst/flv/gstflvparse.h:
In pull mode we create our own index before doing anything else
and don't use the index provided by some files (which are more than
often incorrect and cause failed seeks).
For push mode we still use the index provided by the file and extend it
while doing the playback.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_push_src_event),
(gst_flv_demux_loop), (gst_flv_demux_handle_seek_pull),
(gst_flv_demux_sink_event):
Instead of using gst_pad_event_default() use a small
gst_pad_push_event() wrapper that only does what we want and is much
more simple.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_change_state),
(gst_flv_demux_set_index), (gst_flv_demux_init):
* gst/flv/gstflvdemux.h:
If our index was created by the element and not provided from the
outside we should destroy it when starting a new stream to get
all old entries removed.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_pull_range):
Improve debugging a bit when pulling a buffer from upstream fails.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_cleanup),
(gst_flv_demux_handle_seek_pull), (gst_flv_demux_dispose):
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Close the currently playing segment from the streaming thread
instead of the thread where the seek event is handled.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_loop):
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_timestamp):
* gst/flv/gstflvparse.h:
Get an approximate duration of the file by looking at the timestamp
of the last tag in pull mode. If we get (maybe better) duration from
metadata later we'll use that instead.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_pull_range),
(gst_flv_demux_pull_tag), (gst_flv_demux_pull_header):
Refactor _pull_range() logic with checks into a seperate function
to make things a bit more readable.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_chain),
(gst_flv_demux_base_init):
Use gst_element_class_set_details_simple().
If we get GST_FLOW_NOT_LINKED in the parse loop but at least
one of the pads is linked continue the loop.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_chain):
Go out of the parse loop as soon as we get an error instead
of parsing until the GstAdapter is empty.
Add some explanations about the header and tag size.
Don't print synchronizing message if everything is fine.
Original commit message from CVS:
* gst/flv/Makefile.am:
* gst/flv/gstflvdemux.c: (plugin_init):
* gst/flv/gstflvmux.c: (gst_flv_mux_base_init),
(gst_flv_mux_class_init), (gst_flv_mux_init),
(gst_flv_mux_finalize), (gst_flv_mux_reset),
(gst_flv_mux_handle_src_event), (gst_flv_mux_handle_sink_event),
(gst_flv_mux_video_pad_setcaps), (gst_flv_mux_audio_pad_setcaps),
(gst_flv_mux_request_new_pad), (gst_flv_mux_release_pad),
(gst_flv_mux_write_header), (gst_flv_mux_write_buffer),
(gst_flv_mux_collected), (gst_flv_mux_change_state):
* gst/flv/gstflvmux.h:
Add first version of a FLV muxer. The only missing feature is writing
of stream metadata.
