Commit graph

164 commits

Author SHA1 Message Date
David Schleef
bec69e20ae orc: update generated files to fix MSVC compile issues 2010-09-16 18:03:23 -07:00
Sebastian Dröge
18b282e49f orc: Fix generated source files 2010-09-10 08:43:17 +02:00
Sebastian Dröge
9b85b13d80 adder: Do debug category initialization in plugin_init again 2010-09-09 11:12:56 +02:00
Sebastian Dröge
3c43dbfc51 orc: Update generated source files everywhere 2010-09-09 10:59:59 +02:00
Sebastian Dröge
8ba4b70118 Revert "Revert "Use init functions for Orc code""
This reverts commit 93aa13639d.

Everything should work now after regenerating the disted source files.
2010-09-09 10:57:41 +02:00
Stefan Kost
c50104c94e adder: use GST_BOILERPALTE macro 2010-09-01 10:07:02 +03:00
Wim Taymans
93aa13639d Revert "Use init functions for Orc code"
This reverts commit b2051090b4.

Fixes the build again until someone pushes the regenerated .c/.h
files too.
2010-08-27 11:49:47 +02:00
David Schleef
b2051090b4 Use init functions for Orc code 2010-08-26 17:03:13 -07:00
Alessandro Decina
842a6c64c5 adder: Make sure FLUSH_STOP is always sent after a flushing seek.
Send FLUSH_STOP right after forwarding the seek event upstream if necessary.
This makes sure that adder->srcpad is not left flushing if seeking fails or if
upstream is blocked.

The same fix was already applied to videomixer in 49b2a946.
2010-08-24 11:43:23 +02:00
Tim-Philipp Müller
b16e7e8fa2 gst: update orc files 2010-06-26 18:19:33 +01:00
David Schleef
c4ab9c0de8 adder: convert from liboil to orc 2010-06-07 23:58:53 -07:00
Stefan Kost
274f80c7a1 adder: only accept seek-types none and set
Previously we were also acting on cur and end, but treating them like none.
2010-04-30 09:24:14 +03:00
Stefan Kost
ab223520ed adder: rework timestamping
Adder was using always incrementing timestamps. Seeking was done by setting the
position in the newsegment event. This was failing when doing segmented seeks
with rate<0.0, as offset (and thus timestamp) would go below 0.

Now we take both cur and end from the seek event. We construct newsegment events
depending including cur and end from the seek event. We set position to the
start of the segment. Timestamp is set to start or end of segment depending on
rate. Offset is recalculated.
2010-04-30 09:24:13 +03:00
Stefan Kost
57cc1150a9 adder: add support for negative playback rates
Decrement sample counter when playing backwards. Set proper segment when playing
backwards (0..cur instead or cur..-1). Add more logging and fix a format string.
2010-04-11 23:23:39 +03:00
Wim Taymans
b44a5c8dc7 adder: don't hold object lock when calling peer elements
Do not hold the object lock while we call methods on peer elements as this can
lead to deadlocks.

Fixes #608179
2010-01-28 17:43:47 +01:00
Wim Taymans
775636e734 adder: be a lot smarter with buffer management
Detect EOS faster.
Try to reuse one of the input buffer as the output buffer. This usually works
and avoids an allocation and a memcpy.
Be smarter with GAP buffers so that they don't get mixed or cleared at all. Also
try to use a GAP buffer as the output buffer when all input buffers are GAP
buffers.
2009-12-24 19:56:55 +01:00
Wim Taymans
59ace1b9ee adder: use collectpads clipping function
Install a clipping function in the collectpads and use the audio clipping helper
function to perform clipping to the segment boundaries.

Fixes #590265
2009-12-24 16:30:23 +01:00
Wim Taymans
66ae01eced adder: fix juvenile comment 2009-12-24 13:58:52 +01:00
Stefan Kost
3d73a7458a adder: make events succeed, if they succed on atleast one pad 2009-11-19 21:28:23 +02:00
Tim-Philipp Müller
6f4c1ac583 Remove GST_DEBUG_FUNCPTR where they're pointless
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
2009-10-28 00:59:35 +00:00
Stefan Kost
e7368354d5 adder: improve caps filter functionality. Fixes #590146.
Also use the capsfilter if there is no src-peer as the caps constrain what
we can do. Don't create any_caps as a default, as we check for NULL to skip the
filtering. This is a (small) performance regression as we always intersect
otherwise.
2009-08-31 22:48:01 +03:00
Edward Hervey
8cd1b5209b gst: Remove dead assignments and resulting unused variables 2009-08-08 15:54:02 +02:00
Stefan Kost
7205bbc031 adder: reset pending flush-stop flag in state_changed. (mostly) Fixes #590146. 2009-07-30 13:45:42 +03:00
Edward Hervey
3708ca37a8 gstadder: Don't forget to free pending events on flush/dispose.
Fixes #588747
2009-07-20 12:42:32 +02:00
Edward Hervey
50b0cf2c03 adder: Collect incoming tag events and send them after newsegment. Fixes #588747 2009-07-19 10:49:17 +02:00
Stefan Kost
94baad7490 adder: add since tags to docs 2009-07-10 23:27:11 +01:00
Stefan Kost
725bd20045 adder: add a caps-property to avoid to need to plug a capsfilter afterwards
Adder can only handle one common format accross the pads. Thus one needed to add
a capsfilter afterwards and manage the caps. Now one can simply set the caps on
the property.
2009-07-10 20:06:28 +01:00
Stefan Kost
da27fd57e8 adder: keep sending newsegments after seeking
Adder sends with timestamps from 0 upwards. After seeking we need to send
new-segments to get correct positions-queries.
2009-07-06 22:35:14 +01:00
Edward Hervey
c3adf88621 adder: Call set_flushing(TRUE) for flushing seeks *when* the streaming is stopped.
This ensures that collectpads' cookie is properly updated so that when the streaming
threads will restart and be checking for the flushing status of all pads there will
be no inconsistent state.
2009-07-05 21:32:20 +02:00
Wim Taymans
09737d728b adder: only unflush when we flushed before
Ass suggested by Stefan Kost:
Keep track of when the sinkpad was set to flushing and unflush the pad when an
upstream flushing seek failed.
2009-06-23 18:08:44 +02:00
Wim Taymans
85dbf93515 adder: more seeking fixes.
When a seek failed upstream, make sure the adder sinkpad is set unflushing again
so that streaming can continue.
We only have a pending segment when we flushed.
Set the flush_stop_pending flag inside the appropriate locks and before we
attempt to perform the upstream seek.
Add some more comments.
Use the right lock to protect the flags in flush_stop.

See #585708
2009-06-17 11:22:51 +02:00
Stefan Kost
fd36634f88 adder: send flush_stop when seeking failed
At least do the fix to sent the flush_stop when seeking failed to ensure we
keep no pads flushing. before it was send when the seeking worked which is just
plain wrong and was not the intention.
2009-06-15 11:45:19 +03:00
Wim Taymans
45084bf579 adder: send flush-stop earlier
When no flush-stop has been sent by upstream, we have to send one ourselves to
continue playback. Do this as soon as the collect function is called instead of
after we possibly pushed segment events (that got then flushed out)
2009-06-12 16:31:00 +02:00
Stefan Kost
4228ba0c6b adder: only send flush_stop when seek failed
This is still not the ultimate fix. Added some comment to explain the troubles.
2009-05-19 18:44:01 +03:00
Stefan Kost
ef56ebad48 adder: send flush_stop to match flush_start
Adder was relying that something else sends a flush stop. When using adder with
a livesource it was not getting a flush_stop and thus all pads downstream where
keept flushing. Mark a pending flush_stop and send it when we are working on
the new segment back in the streaming thread.
2009-05-19 16:49:35 +03:00
Stefan Kost
c94f952056 adder: add more logging and return value checking 2009-05-19 01:13:34 +03:00
Stefan Kost
705b01aa93 adder: handle the return value from iterator_fold 2009-05-19 01:11:45 +03:00
Stefan Kost
591fbbcea7 adder: use the pad in logging as objects
Helps to differenciate between source and sinks pads.
2009-05-19 01:03:44 +03:00
Stefan Kost
e633c46e95 adder: log details in getcaps like in setcaps 2009-03-10 21:14:43 +02:00
Stefan Kost
79771eaba7 adder: add variants for unsigned to fix warnings for unneeded check
For unsigned int out+in can't be < 0.
2009-03-05 12:27:16 +02:00
Jan Schmidt
6b1e08f277 Don't do void pointer arithmetic. 2009-01-30 17:16:39 +00:00
Stefan Kost
5a30245c38 gst/adder/: Cleanup variable names to make the adder-loop easier to understand.
Original commit message from CVS:
* gst/adder/Makefile.am:
* gst/adder/gstadder.c:
Cleanup variable names to make the adder-loop easier to understand.
Also try to use liboil to spee it up, but ifdef it out as it does not
make any change for me (Intel pentim M (sse,sse2) please try on other
systems).
2008-12-17 08:51:34 +00:00
Thomas Vander Stichele
9b6f3ad0c8 gst/adder/gstadder.c: Change author string after seeing output of gst-inspector.
Original commit message from CVS:
* gst/adder/gstadder.c:
Change author string after seeing output of gst-inspector.
2008-11-10 13:55:08 +00:00
Stefan Kost
2cd4c7e2b9 Don't install static libs for plugins. Fixes #550851 for base.
Original commit message from CVS:
* ext/alsa/Makefile.am:
* ext/cdparanoia/Makefile.am:
* ext/gio/Makefile.am:
* ext/gnomevfs/Makefile.am:
* ext/libvisual/Makefile.am:
* ext/ogg/Makefile.am:
* ext/pango/Makefile.am:
* ext/theora/Makefile.am:
* ext/vorbis/Makefile.am:
* gst/adder/Makefile.am:
* gst/audioconvert/Makefile.am:
* gst/audiorate/Makefile.am:
* gst/audioresample/Makefile.am:
* gst/audiotestsrc/Makefile.am:
* gst/ffmpegcolorspace/Makefile.am:
* gst/gdp/Makefile.am:
* gst/playback/Makefile.am:
* gst/subparse/Makefile.am:
* gst/tcp/Makefile.am:
* gst/typefind/Makefile.am:
* gst/videorate/Makefile.am:
* gst/videoscale/Makefile.am:
* gst/videotestsrc/Makefile.am:
* gst/volume/Makefile.am:
* sys/v4l/Makefile.am:
* sys/ximage/Makefile.am:
* sys/xvimage/Makefile.am:
Don't install static libs for plugins. Fixes #550851 for base.
2008-10-16 15:07:00 +00:00
Stefan Kost
7c2a26c9ed gst/adder/gstadder.c: Cleanup lots of empty lines that came from gst-indent going havoc before I added the INDENT_ON/...
Original commit message from CVS:
* gst/adder/gstadder.c:
Cleanup lots of empty lines that came from gst-indent going havoc
before I added the INDENT_ON/OFF marker some time agao.
2008-08-01 13:06:59 +00:00
Stefan Kost
2b33c755b6 Cleanup Plugin docs. Link to signals and properties. Fix sub-section titles. Drop mentining that all our example pipe...
Original commit message from CVS:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-overrides.txt:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
* docs/plugins/gst-plugins-base-plugins.args:
* docs/plugins/gst-plugins-base-plugins.hierarchy:
* docs/plugins/gst-plugins-base-plugins.interfaces:
* docs/plugins/gst-plugins-base-plugins.prerequisites:
* docs/plugins/gst-plugins-base-plugins.signals:
* docs/plugins/inspect/plugin-adder.xml:
* docs/plugins/inspect/plugin-alsa.xml:
* docs/plugins/inspect/plugin-audioconvert.xml:
* docs/plugins/inspect/plugin-audiorate.xml:
* docs/plugins/inspect/plugin-audioresample.xml:
* docs/plugins/inspect/plugin-audiotestsrc.xml:
* docs/plugins/inspect/plugin-cdparanoia.xml:
* docs/plugins/inspect/plugin-decodebin.xml:
* docs/plugins/inspect/plugin-ffmpegcolorspace.xml:
* docs/plugins/inspect/plugin-gdp.xml:
* docs/plugins/inspect/plugin-gnomevfs.xml:
* docs/plugins/inspect/plugin-libvisual.xml:
* docs/plugins/inspect/plugin-ogg.xml:
* docs/plugins/inspect/plugin-pango.xml:
* docs/plugins/inspect/plugin-playback.xml:
* docs/plugins/inspect/plugin-queue2.xml:
* docs/plugins/inspect/plugin-subparse.xml:
* docs/plugins/inspect/plugin-tcp.xml:
* docs/plugins/inspect/plugin-theora.xml:
* docs/plugins/inspect/plugin-typefindfunctions.xml:
* docs/plugins/inspect/plugin-uridecodebin.xml:
* docs/plugins/inspect/plugin-video4linux.xml:
* docs/plugins/inspect/plugin-videorate.xml:
* docs/plugins/inspect/plugin-videoscale.xml:
* docs/plugins/inspect/plugin-videotestsrc.xml:
* docs/plugins/inspect/plugin-volume.xml:
* docs/plugins/inspect/plugin-vorbis.xml:
* docs/plugins/inspect/plugin-ximagesink.xml:
* docs/plugins/inspect/plugin-xvimagesink.xml:
* ext/alsa/gstalsamixer.c:
* ext/alsa/gstalsasink.c:
* ext/alsa/gstalsasrc.c:
* ext/gio/gstgiosink.c:
* ext/gio/gstgiosrc.c:
* ext/gio/gstgiostreamsink.c:
* ext/gio/gstgiostreamsrc.c:
* ext/gnomevfs/gstgnomevfssink.c:
* ext/gnomevfs/gstgnomevfssrc.c:
* ext/ogg/gstoggdemux.c:
* ext/ogg/gstoggmux.c:
* ext/pango/gstclockoverlay.c:
* ext/pango/gsttextoverlay.c:
* ext/pango/gsttextrender.c:
* ext/pango/gsttimeoverlay.c:
* ext/theora/theoradec.c:
* ext/theora/theoraenc.c:
* ext/theora/theoraparse.c:
* ext/vorbis/vorbisdec.c:
* ext/vorbis/vorbisenc.c:
* ext/vorbis/vorbisparse.c:
* ext/vorbis/vorbistag.c:
* gst/adder/gstadder.c:
* gst/audioconvert/gstaudioconvert.c:
* gst/audioresample/gstaudioresample.c:
* gst/audiotestsrc/gstaudiotestsrc.c:
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
* gst/gdp/gstgdpdepay.c:
* gst/gdp/gstgdppay.c:
* gst/playback/gstdecodebin2.c:
* gst/playback/gstplaybin.c:
* gst/playback/gstplaybin2.c:
* gst/playback/gstqueue2.c:
* gst/playback/gsturidecodebin.c:
* gst/tcp/gstmultifdsink.c:
* gst/tcp/gsttcpserversink.c:
* gst/videorate/gstvideorate.c:
* gst/videoscale/gstvideoscale.c:
* gst/videotestsrc/gstvideotestsrc.c:
* gst/volume/gstvolume.c:
* sys/ximage/ximagesink.c:
* sys/xvimage/xvimagesink.c:
Cleanup Plugin docs. Link to signals and properties. Fix sub-section
titles. Drop mentining that all our example pipelines are "simple"
pipelines.
2008-07-10 21:06:06 +00:00
Stefan Kost
e0d27d23cc gst/adder/gstadder.c: Use GST_DEBUG_FUNCPTR and remove some extra vlnak lines.
Original commit message from CVS:
* gst/adder/gstadder.c:
Use GST_DEBUG_FUNCPTR and remove some extra vlnak lines.
2008-06-29 13:45:27 +00:00
Sebastian Dröge
1d37b272ce gst/adder/gstadder.c: When using gst_element_iterate_pads() one has to unref every pad after usage.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration),
(gst_adder_query_latency):
When using gst_element_iterate_pads() one has to unref every pad
after usage.
2008-06-02 12:20:35 +00:00
Sebastian Dröge
57c3aa9b66 gst/adder/gstadder.c: Implement latency query.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration),
(gst_adder_query_latency), (gst_adder_query):
Implement latency query.
2008-05-28 08:14:47 +00:00
Sebastian Dröge
4ccac97b40 gst/adder/gstadder.c: Correctly resync the iterator if gst_iterator_next() returns
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration):
Correctly resync the iterator if gst_iterator_next() returns
GST_ITERATOR_RESYNC.
2008-05-27 18:10:00 +00:00