When the `child-added` signal emission was called, the
`GESContainer->child_added` vmethod was called (the signal is
`G_SIGNAL_RUN_FIRST`) so we need to call `GESContainer->child_removed`
ourself so subclasses know they do not control the child anymore.
The in-point of a clip is kept in sync with its core children, unless they
have no has-internal-source.
The max-duration is defined as the minimum max-duration amongst the
clip's core children. If it is set to a new value, this sets the
max-duration of its core children to the same value if they have
has-internal-source set as TRUE.
Non-core children (such as effects on a source clip) do not influence
these values.
As part of this, we no longer track in-point in GESContainer. Unlike start
and duration, the in-point of a timeline element does not refer to its
extent in the timeline. As such, it has little meaning for most
collections of timeline-elements, in particular GESGroups. As such, there
is no generic way to relate the in-point of a container to its children.
Add the child-property-added and child-property-removed signals to
GESTimelineElement.
GESContainer is able to use this to keep their child properties in sync
with their children: if they are added or removed from the child, they
are also added or removed from the container.
Hold the notify signals for the container and the children until after
the child has been fully added or removed.
After the previous commit, this was used to ensure that the
notify::priority signal was sent for children of a clip *after* the
child-removed signal. This stopped being the case when the code in
->child_removed was moved to ->remove_child (the latter is called before
the child-removed signal is emitted, whilst the former is called
afterwards). Rather than undo this move of code, which was necessary to
ensure that ->add_child was always reversed, the notify::priority signal
is now simply delayed until after removing the child has completed. This
was done for all notify signals, as well as in the add method, to ensure
consistency.
This allows the test_clips.py test_signal_order_when_removing_effect to
pass.
Also make subclasses take a copy of the list of the children before
setting the start and duration, since this can potentially re-order the
children (if they have the SET_SIMPLE flag set).
Only allow elements that were created by ges_clip_create_track_elements
(or copied from such an element) to be added to a clip. This prevents
users from adding arbitrary elements to a clip.
As an exception, a user can add GESBaseEffects to clips whose class
supports it, i.e. to a GESSourceClip and a GESBaseEffectClip.
This change also introduces a distinction between the core elements of a
clip (created by ges_clip_create_track_elements) and non-core elements
(currently, only GESBaseEffects, for some classes). In particular,
GESBaseEffectClip will now distinguish between its core elements and
effects added by the user. This means that the core elements will always
have the lowest priority, and will not be listed as top effects. This is
desirable because it brings the behaviour of GESBaseEffectClip in line
with other clip types.
Stop overwriting the ->list_children_properties virtual method in
subclasses because the timeline element class handles everything itself
anyway.
Note that containers already automatically add the children properties of
their child elements in ges_container_add.
Previously, we were setting the inpoint_offset using the start offset in
the duration callback!
Also added a notify for when the duration is changed in the child start
callback.
We used to always call the `->set_child_property` virtual method
of the object that `ges_timeline_element_set_child_property` was called
from, but that means that, in the case of referencing GESContainer
children properties from its children, the children wouldn't know
what child property have been set, and the children override wouldn't
be takent into account, in turns, it means that the behaviour could be
different in the setter depending on parent the method was called,
which is totally unexpected.
We now make sure that the vmethod from the element that introduced the
child property is called whatever parent method is called, making the
behaviour more uniform.
Fix the python override to make sure that new behaviour is respected.
In general, brought the behaviour of the `start`, `duration` and
`inpoint` setters in line with each other. In particular:
1. fixed return value the GESSourceClip `duration` setter
2. changed the GESClip `start` setter
3. fixed the inpoint callback for GESContainer
4. changed the type of `res` in GESTimelineElement to be gint to
emphasise that the GES library is using the hack that a return of -1
from klass->set_duration means no notify signal should be sent out.
Also added a new test for clips to ensure that the setters work for
clips within and outside of timelines, and that the `start`, `inpoint`
and `duration` of a clip will match its children.
By passing NULL to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
Now that the notion of layer has been moved down to #GESTimelineElement
(through the new #ges_timeline_element_get_layer_priority method), this
method make much more sense directly in the base class.
ges_container_add removes the child being added if the call to
ges_timeline_element_set_parent fails. In this case, subclasses should
be given the chance to revert the effects of the add_child vmethod which
has just been called.
This is implemented on top of a Tree that represents the whole timeline.
SourceClips can not fully overlap anymore and the tests have been
updated to take that into account. Some new tests were added to verify
that behaviour in greater details
Export GES library API in headers when we're building the
library itself, otherwise import the API from the headers.
This fixes linker warnings on Windows when building with MSVC.
Fix up some missing config.h includes when building the lib which
is needed to get the export api define from config.h
Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/issues/42
When removing an effect from a clip, first the notify::priority signals
were being emitted for the remaining effects which changed priority, and only
at the end the child-removed signal. Now the child-removed signal is emitted
first.
Marking them as children properties and properly allow serializing
clips children properties.
This doesn't handle several TrackElement of a same type with
different property values but this require more worked already
marked as fixme to allow specifying full path of elements in the
children properties API.
See https://gitlab.gnome.org/GNOME/pitivi/issues/1687
And reuse the same previously created element when adding the clip
back to a layer, avoiding losing all setting done on clip children
in that situation
This is a behaviour change but previous behaviour was actually totally
unexpected and people working around that weird behaviour will moste
probably not care about that change
Differential Revision: https://phabricator.freedesktop.org/D1094
Allowing pasting groups paste exactly what had been copied
And not the new version of the contained objects
This technically breaks the C API but this is a new API and I believe
and hope nobody is using it right now.
Reviewed-by: Thibault Saunier <thibault.saunier@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D616
In the GESTimeline, TrackElement addition to a clip might get cancelled
(and thus the element gets removed), we need to make sure users do not
get wrong signals.
Also document the fact that user should connect to container::child-added
with g_signal_connect_after.
I got some trouble with
arc land
and I wanted to push the 3 commit coming after this revert as 3
different commits but they ended up being all squash into one single
commit, which is clearly not cool for later bisecting and blaming.
Reverting that commit and re pushing those 3 commits as they were
supposed to be.
This reverts commit 9fe15ef435.
g-ir-scanner includes section docs as class/interface docs if the section name is equal to the lowercase type name.
Since all the documentation is in section blocks, rename them to match the type names.
https://bugzilla.gnome.org/show_bug.cgi?id=727776
For that we make the children_control_mode a protected filed, directly usable by
subclasses, removing the method to set it.
And we let the subclass set and get the priority offsets to the container class.
