Original commit message from CVS:
* gst/smpte/gstsmpte.c: (gst_smpte_transition_type_get_type):
Add cast to avoid compiler warnings with older GLib versions
where the nick/name members in GEnumValue are not declared as
constant strings.
Original commit message from CVS:
* gst/audiofx/audioamplify.c: (gst_audio_amplify_base_init),
(gst_audio_amplify_class_init), (gst_audio_amplify_init),
(gst_audio_amplify_set_process_function),
(gst_audio_amplify_setup):
* gst/audiofx/audioamplify.h:
* gst/audiofx/audioinvert.c: (gst_audio_invert_base_init),
(gst_audio_invert_class_init), (gst_audio_invert_setup):
* gst/audiofx/audioinvert.h:
Some small cleanups and port both elements to the new GstAudioFilter
base class to save a few lines of common code.
* gst/audiofx/Makefile.am:
Link against libgstaudio for the above changes
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_class_init),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_filter_inplace):
Rename "values" property to "band-values" and change type into a
GValueArray, so it's more easily bindable and the range of the
values passed in is defined and checked etc.; also do some
locking.
Original commit message from CVS:
* gst/videocrop/gstvideocrop.c:
(gst_video_crop_get_image_details_from_caps),
(gst_video_crop_transform_packed_complex):
Fix cropping for packed 4:2:2 formats YUYV/YUY2 and UYVY.
* tests/icles/videocrop-test.c: (check_bus_for_errors),
(test_with_caps), (main):
Block streaming thread before changing filter caps while the
pipeline is running so that we don't get random not-negotiated
errors just because GStreamer can't handle that yet.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_media_to_caps),
(gst_rtspsrc_activate_streams):
Convert SDP fields to upper/lowercase following the rules in the SDP to
caps document.
Original commit message from CVS:
* gst/rtp/README:
* gst/rtp/gstrtpilbcdepay.c:
* gst/rtp/gstrtpilbcpay.c:
* gst/rtp/gstrtpmp4gdepay.c:
* gst/rtp/gstrtpmp4gpay.c:
* gst/rtp/gstrtpspeexdepay.c:
* gst/rtp/gstrtpspeexpay.c:
* gst/rtp/gstrtpsv3vdepay.c:
* gst/rtp/gstrtptheoradepay.c:
* gst/rtp/gstrtptheorapay.c:
* gst/rtp/gstrtpvorbisdepay.c:
* gst/rtp/gstrtpvorbispay.c:
Fix case of encoding-name and key/value pairs to match the document.
This is to make interoperation with SDP case-insensitive as required by
the relevant RFCs.
Original commit message from CVS:
* gst/multifile/gstmultifilesink.c:
(gst_multi_file_sink_class_init):
* gst/multifile/gstmultifilesrc.c: (gst_multi_file_src_class_init):
* gst/mve/gstmvedemux.c: (gst_mve_video_create_buffer),
(gst_mve_video_palette), (gst_mve_video_code_map),
(gst_mve_audio_init), (gst_mve_audio_data), (gst_mve_timer_create),
(gst_mve_demux_chain):
* gst/mve/gstmvemux.c: (gst_mve_mux_push_chunk):
* gst/mve/mveaudioenc.c: (mve_compress_audio):
* gst/mve/mvevideodec16.c: (ipvideo_copy_block):
* gst/mve/mvevideodec8.c: (ipvideo_copy_block):
* gst/mve/mvevideoenc16.c: (mve_encode_frame16):
* gst/mve/mvevideoenc8.c: (mve_encode_frame8):
Use proper print statements.
Fixes build on mac os x.
<wingo> oo look at me my name is edward i'm hacking on macos wooo
Original commit message from CVS:
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps),
(gst_rtp_L16_pay_flush), (gst_rtp_L16_pay_handle_buffer):
* gst/rtp/gstrtpL16pay.h:
Fill up to MTU using adapter.
Timestamp rtp packets.
Original commit message from CVS:
* gst/multipart/multipartmux.c: (gst_multipart_mux_collected):
* sys/ximage/ximageutil.c: (ximageutil_check_xshm_calls):
Use G_GSIZE_FORMAT in print statements for portability.
Fixes build on macosx.
Original commit message from CVS:
* gst/rtp/Makefile.am:
* gst/rtp/gstrtp.c: (plugin_init):
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_base_init),
(gst_rtp_L16_depay_class_init), (gst_rtp_L16_depay_init),
(gst_rtp_L16_depay_parse_int), (gst_rtp_L16_depay_setcaps),
(gst_rtp_L16_depay_process), (gst_rtp_L16_depay_set_property),
(gst_rtp_L16_depay_get_property), (gst_rtp_L16_depay_change_state),
(gst_rtp_L16_depay_plugin_init):
* gst/rtp/gstrtpL16depay.h:
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_get_type),
(gst_rtp_L16_pay_base_init), (gst_rtp_L16_pay_class_init),
(gst_rtp_L16_pay_init), (gst_rtp_L16_pay_finalize),
(gst_rtp_L16_pay_setcaps), (gst_rtp_L16_pay_handle_buffer),
(gst_rtp_L16_pay_plugin_init):
* gst/rtp/gstrtpL16pay.h:
Port and enable raw audio payloader/depayloader. Needs a bit more work
on the payloader side.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (pad_blocked),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_activate_streams), (gst_rtspsrc_loop_udp):
* gst/rtsp/gstrtspsrc.h:
Only unblock the udp pads when we linked and activated them all.
Fixes#395688.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audioamplify.c:
(gst_audio_amplify_clipping_method_get_type),
(gst_audio_amplify_base_init), (gst_audio_amplify_class_init),
(gst_audio_amplify_init), (gst_audio_amplify_set_process_function),
(gst_audio_amplify_set_property), (gst_audio_amplify_get_property),
(gst_audio_amplify_set_caps),
(gst_audio_amplify_transform_int_clip),
(gst_audio_amplify_transform_int_wrap_negative),
(gst_audio_amplify_transform_int_wrap_positive),
(gst_audio_amplify_transform_float_clip),
(gst_audio_amplify_transform_float_wrap_negative),
(gst_audio_amplify_transform_float_wrap_positive),
(gst_audio_amplify_transform_ip):
* gst/audiofx/audioamplify.h:
* gst/audiofx/audiofx.c: (plugin_init):
Add new element "audioamplify". This allows scaling of raw audio
samples, similar to the "volume" element, but provides different modes
for clipping and allows unlimited amplification. It's mainly targeted
for creative sound design and not as a replacement of the "volume"
element. Fixes#397162
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Add docs for audioamplify and integrate them into the build system
* tests/check/Makefile.am:
* tests/check/elements/audioamplify.c: (setup_amplify),
(cleanup_amplify), (GST_START_TEST), (amplify_suite), (main):
Add fairly extensive unit test suite for audioamplify
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (pad_unblocked), (pad_blocked):
Unblock pads after adding the pads to the element so that autopluggers
get a change to link something. Possibly fixes#395688.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofx.c: (plugin_init):
* gst/audiofx/audioinvert.c: (gst_audio_invert_base_init),
(gst_audio_invert_class_init), (gst_audio_invert_init),
(gst_audio_invert_set_property), (gst_audio_invert_get_property),
(gst_audio_invert_set_caps), (gst_audio_invert_transform_int),
(gst_audio_invert_transform_float),
(gst_audio_invert_transform_ip):
* gst/audiofx/audioinvert.h:
Add new audiofx element "audioinvert". This element swaps the upper
and lower half of samples and can be used for example for a
wide-stereo effect. Fixes#396057
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Add docs for the audioinvert element and add them to the build system.
* tests/check/Makefile.am:
* tests/check/elements/audioinvert.c: (setup_invert),
(cleanup_invert), (GST_START_TEST), (invert_suite), (main):
Add unit test suite for the audioinvert element.
Original commit message from CVS:
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_parse_int),
(gst_rtp_mp4g_depay_setcaps), (gst_rtp_mp4g_depay_process):
Parse config params as string and int.
Parse and use AU header length
Original commit message from CVS:
* gst/smpte/barboxwipes.c: (gst_wipe_boxes_draw),
(gst_wipe_triangles_clock_draw), (gst_wipe_triangles_draw):
* gst/smpte/gstmask.c: (_gst_mask_register):
* gst/smpte/gstmask.h:
* gst/smpte/gstsmpte.c: (gst_smpte_update_mask):
* gst/smpte/paint.c: (gst_smpte_paint_hbox), (draw_bresenham_line),
(gst_smpte_paint_triangle_clock):
constify some static structs.
Don't update the mask if nothing changed to the params.
Make sure we never draw outside of the picture. Fixes#398325.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_stream_header_pull):
Error out properly when pull_range fails while we're reading the
headers, instead of just pausing the task silently. Fixes#399338.
Original commit message from CVS:
* gst/smpte/gstsmpte.c: (gst_smpte_collected):
Some more sanity checks to make sure the input formats match and the
input pads are actually negotiated, in case someone tries to feed
buffers from fakesrc or filesrc. Fixes#398299.
Also const-ify an array, just because we can.
Original commit message from CVS:
* gst/smpte/gstsmpte.c: (fill_i420), (gst_smpte_collected):
Ignore previous commit, that was only valid for widths and heights
that are multiples of 4.
Copy over size/stride macros from jpegdec. This allows the element
to work with any width,height...
... but puts in evidence that the actual transformations only work
with width/height that are multiples of 4.
Original commit message from CVS:
* gst/smpte/gstsmpte.c: (gst_smpte_collected):
Allocate buffers of the right size.
The proper size of a I420 buffer in bytes is:
width * height * 3
------------------
2
Original commit message from CVS:
* gst/smpte/gstsmpte.c: (gst_smpte_init):
Proxy getcaps on sink pads too, so that we either end up with the
same dimensions on all pads or error out if that's not possible
(seems to work even!). Fixes#398086, I think.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo circular-chaos org>
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_class_init),
(gst_audio_panorama_set_process_function):
Use a function array for process methods, add more docs and define the
startindex of enums.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/avi/gstavimux.c: (gst_avi_mux_finalize),
(gst_avi_mux_pad_reset), (gst_avi_mux_reset), (gst_avi_mux_init),
(gst_avi_mux_vidsink_set_caps), (gst_avi_mux_audsink_set_caps),
(gst_avi_mux_request_new_pad), (gst_avi_mux_release_pad),
(gst_avi_mux_riff_get_avi_header),
(gst_avi_mux_riff_get_avix_header), (gst_avi_mux_riff_get_header),
(gst_avi_mux_write_avix_index), (gst_avi_mux_add_index),
(gst_avi_mux_bigfile), (gst_avi_mux_start_file),
(gst_avi_mux_stop_file), (gst_avi_mux_handle_event),
(gst_avi_mux_do_buffer), (gst_avi_mux_do_one_buffer),
(gst_avi_mux_change_state):
* gst/avi/gstavimux.h:
* tests/check/elements/avimux.c: (teardown_src_pad):
Add support for more than one audio stream; write better AVIX
header; refactor code a bit; don't announce vorbis caps on our audio
sink pads since we don't support it anyway. Closes#379298.
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/interleave/deinterleave.c (gst_deinterleave_add_new_pads):
Use fixed caps on src pads.
(gst_deinterleave_remove_pads): Remove src pads, not sink pads. I
seem to have reverse midas disease!
(gst_deinterleave_process): Proxy timestamps, offsets, durations,
and set caps on outgoing buffers. Fixes#395597, I think.
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/interleave/interleave.c (gst_interleave_init): Init the
activation mode properly.
(gst_interleave_src_setcaps, gst_interleave_src_getcaps)
(gst_interleave_init): Set a setcaps and getcaps function on the
src pad, so that we can implement pull-mode negotiation.
(gst_interleave_sink_setcaps): Renamed from
gst_interleave_setcaps, as it only does the sink logic now.
Implement both for pull-mode and push-mode.
(gst_interleave_process): Set caps on our outgoing buffer.
(gst_interleave_src_activate_pull): Fix some more bogus casts.
What is up with this.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_read_range):
* gst/id3demux/gstid3demux.c: (gst_id3demux_read_range):
Set correct caps on outgoing pulled buffers, or things blow up
after recent core changes.
Original commit message from CVS:
Patch by: Lutz Mueller <lutz at topfrose dot de>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_activate_streams):
Check for stream pad before activating.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/rtsp/COPYING.MIT:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_stream),
(gst_rtspsrc_stream_free), (gst_rtspsrc_cleanup),
(gst_rtspsrc_alloc_udp_ports), (pad_unblocked), (pad_blocked),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_activate_streams), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_loop_udp), (gst_rtspsrc_send),
(gst_rtspsrc_parse_methods),
(gst_rtspsrc_create_transports_string),
(gst_rtspsrc_prepare_transports), (gst_rtspsrc_setup_streams),
(gst_rtspsrc_open), (gst_rtspsrc_close):
* gst/rtsp/gstrtspsrc.h:
* gst/rtsp/rtspconnection.c: (rtsp_connection_create),
(rtsp_connection_connect), (rtsp_connection_send), (read_line),
(parse_request_line), (parse_line), (rtsp_connection_read),
(rtsp_connection_close):
* gst/rtsp/rtspdefs.c: (rtsp_init_status), (rtsp_strresult),
(rtsp_method_as_text), (rtsp_header_as_text),
(rtsp_status_as_text), (rtsp_find_header_field),
(rtsp_find_method):
* gst/rtsp/rtspdefs.h:
* gst/rtsp/rtspextwms.c: (rtsp_ext_wms_after_send),
(rtsp_ext_wms_configure_stream):
* gst/rtsp/rtspmessage.c: (rtsp_message_new), (rtsp_message_init),
(rtsp_message_new_request), (rtsp_message_init_request),
(rtsp_message_new_response), (rtsp_message_init_response),
(rtsp_message_init_data), (rtsp_message_unset),
(rtsp_message_free), (rtsp_message_add_header),
(rtsp_message_get_header), (rtsp_message_set_body),
(rtsp_message_get_body), (dump_mem), (rtsp_message_dump):
* gst/rtsp/rtspmessage.h:
* gst/rtsp/sdpmessage.c: (sdp_message_get_attribute_val_n),
(sdp_media_get_attribute_val_n), (read_string), (read_string_del),
(sdp_parse_line), (sdp_message_parse_buffer), (print_media),
(sdp_message_dump):
Allow url to be NULL to be able to use it for server connections.
Can now send responses as well as requests.
No longer hangs in an endless loop if EOF is received.
Can now convert a status code to a text string.
Return RTSP_HDR_INVALID for unknown headers.
Return RTSP_INVALID for unknown methods.
Copy CSeq and Session headers from the request.
Only free memory corresponding to the currently set message type.
Added const to function arguments as appropriate.
Avoid a compiler warning when initializing nmedia.
Use guint rather than gint to avoid compiler warnings.
Fix crasher in wms extension.
Factor out stream setup from open_connection.
Delay activation of streams when actual data is received from the
server, this prepares us to do proper protocol switching.
Added new license.
Fixes#380895.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo ubuntu com>
* docs/plugins/Makefile.am:
* gst/audiofx/audiopanorama.c:
Some small docs fixes (#394851).
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* ext/jpeg/gstjpegdec.c:
* ext/jpeg/gstjpegenc.c:
* ext/jpeg/smokecodec.c:
These libjpeg callbacks should return a 'boolean' (unsigned char
apparently) and not a 'gboolean' (which maps to gint). Fixes
warnings when compiling with MingW (#393427).
* gst/rtsp/rtspconnection.c: (rtsp_connection_read):
Use ioctlsocket on win32.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Some printf format fixes for win32.
Original commit message from CVS:
2007-01-07 Andy Wingo <wingo@pobox.com>
* configure.ac:
* gst/interleave/Makefile.am:
* gst/interleave/plugin.h:
* gst/interleave/plugin.c:
* gst/interleave/interleave.c:
* gst/interleave/deinterleave.c: New elements interleave and
deinterleave, implement channel interleaving and deinterleaving.
The interleaver can operate in pull or push mode but the
deinterleaver is more like a demuxer and can only operate in push
mode.
Original commit message from CVS:
* gst/cutter/gstcutter.c: (gst_cutter_chain):
Use gst_guint64_to_gdouble for conversion.
* win32/vs6/libgstmatroska.dsp:
Add zlib to the link.
* win32/vs6/libgstvideobox.dsp:
Update liboil library name (project is linked to liboil-0.3-0.lib now).
Original commit message from CVS:
* configure.ac:
* gst/qtdemux/Makefile.am:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_moov):
Check for zlib and if available pass it explicitly to the linker
when linking qtdemux. If not available (or --disable-external has
been specified!), disable the bits in qtdemux that use it. Fixes
build on MingW (#392856).
Original commit message from CVS:
* gst/matroska/Makefile.am:
If zlib is available and used, we must link it explicitly for
things to work on MingW (fixes#392855).
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_audio_pad_setcaps):
The "signed" field in audio caps is of boolean type, trying to use
gst_structure_get_int() to extract it will fail. Fixing this makes
matroskamux accept raw audio input (#387121) (use at your own risk
though, due to the matroska spec being not entirely useful in this
respect).
Also fix up raw audio structures in template caps so that they
represent what our setcaps function will actually accept, so that
converters know what to convert to.
Finally, don't fail if there isn't an "endianness" field in 8-bit
PCM caps.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_post_progress),
(gst_qtdemux_chain):
Don't post BUFFERING messages in streaming mode if the stream
headers are behind the movie data; instead, post "progress" element
messages as a temporary solution. Apps might get confused and do
silly things to the pipeline state if they see buffering messages
from different sources and don't realize they come from different
sources (#387160).
