mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-12-19 14:56:36 +00:00
Code Issues 1 Projects Releases Wiki Activity
7245 commits 44 branches 1510 tags 466 MiB
Commit graph

3149 commits

Author SHA1 Message Date
Mark Nauwelaerts
79f69bbf72 wavparse: push mode; fix/improve chunk handling 
Handle large, invalid or otherwise unusual chunk sizes.
Verify some chunk sizes to be at least the size they are
expected to be and round up some sizes to even number for
e.g. offset administration, which must also be properly
tracked in push mode.
 2009-08-31 16:50:00 +02:00
Mark Nauwelaerts
bb2b02c5b7 avidemux: push mode; cater for unusual chunk sizes 2009-08-31 16:50:00 +02:00
Wim Taymans
a74c385b7b rtpsession: use proper locking for pads and caps 
Use the sesion lock and shotdown variable to protect and ref the pads we are
going to push on.

fixes #561825
 2009-08-31 16:38:27 +02:00
Wim Taymans
a522a2d4d2 rtpbin: whitespace fixes 2009-08-31 16:33:26 +02:00
Tim-Philipp Müller
4cf513da9b wavparse: clean up adapter properly 
Reflow code so we don't try to clear or re-use an already-freed adapter.
 2009-08-31 13:40:14 +01:00
Tim-Philipp Müller
d875e72b02 flactag, wavparse: GstAdapter is not a GstObject 2009-08-31 13:07:53 +01:00
Jan Schmidt
3f69f8d3ee flvdemux: Fix tests warning from setting a NULL index 
Setting a null index in the tests was causing warnings by unreffing
NULL pointers. This is a bug exposed by a recent change in core, it
seems.
 2009-08-31 12:10:05 +01:00
Wim Taymans
a26a2a9ff5 jitterbuffer: add slope estimation code and debug 
Add some code to measure the sender speed vs the receiver speed. This can be
used to detect bursts.
 2009-08-31 13:02:16 +02:00
Wim Taymans
4814d899c2 jitterbuffer: reset skew when timestamps change 
Refactor the jitterbuffer resync code.
Reset the skew correction when we detect a big timestamp discont.

See #593354
 2009-08-31 12:57:32 +02:00
Wim Taymans
e254936e34 jitterbuffer: make sure time never goes invalid 
Since the skew can be negative, we might end up with invalid timestamps. Check
for negative results and clamp to 0.

See #593354
 2009-08-31 12:47:15 +02:00
Jarkko Palviainen
1f14f577d8 udpsink: Add ttl multicast property 
Add a new ttl-mc property to control the TTL on multicast addresses.

Fixes #588245
 2009-08-31 12:16:01 +02:00
Jarkko Palviainen
e2518fedbe udp: split out TTL and loop options 
Split setting the TTL and loop parameters in 2 methods as they are not related.
Fix setting the TTL correctly for multicast streams.

See #588245
 2009-08-31 12:13:07 +02:00
Wim Taymans
6a53d0a2c9 rtp: whitespace fixes 2009-08-31 11:32:06 +02:00
Sebastian Dröge
867b8c9d15 videobox: Split declarations into a header file and add autocrop stuff to the docs 2009-08-31 08:19:25 +02:00
Sebastian Dröge
6976f3d39a videobox: Reconfigure basetransform if something changes again 
For this invent a new lock and don't abuse the basetransform lock,
otherwise we'll end up in deadlocks.
 2009-08-31 08:19:25 +02:00
Stephen Jungels
041ddd6f8f videobox: Add support for autocropping according to the caps 
Fixes bug #582238.
 2009-08-31 08:19:25 +02:00
Sebastian Dröge
041fa82179 rtpsession: Make sure that used caps are not freed already 
Fixes bug #593391.
 2009-08-31 08:09:09 +02:00
Sebastian Dröge
000a483d31 rtp: Use new gst_iterator_new_single() for the internal linked pads iteration 2009-08-31 08:09:09 +02:00
Sebastian Dröge
a1cddb3fd6 rtpsession: Use iterate internal links instead of deprecated get internal links 2009-08-31 08:09:09 +02:00
Sebastian Dröge
c8c02d2c7a jitterbuffer: Use iterate internal links instead of deprecated get internal links 2009-08-31 08:09:08 +02:00
Sebastian Dröge
97cb7bdb6c rtpssrcdemux: Use iterate internal links instead of deprecated get internal links 2009-08-31 08:09:08 +02:00
Wim Taymans
e9e94a771b qtdemux: add support for agsm 
Fixes #592530
 2009-08-21 11:44:43 +02:00
Mark Nauwelaerts
15d17763c0 qtdemux: fix qt style string tag extraction 
QT style tags are tested on starting with (C) symbol using >>,
and (unsigned) int (may) have different >> behaviour.
Fixes #592232.
 2009-08-18 19:01:11 +02:00
Olivier Crête
7f569ca9c8 rtpbin: Fix reference leak 
Fixes #591476.
 2009-08-14 13:47:18 +01:00
ric
92abe07e80 rtpsource: avoid buffer leak on bad seqnum 
Fixes #590797
 2009-08-11 02:30:47 +01:00
Wim Taymans
9f68303a2e rtpsource: allow for NULL caps on buffers 
Add the NULL caps check where it matters and also cover another case of
potential NULL caps.

Fixes #590030
 2009-08-11 02:30:47 +01:00
Olivier Crête
e37844fdc7 rtpsource: Incoming buffers do not always have caps 2009-08-11 02:30:47 +01:00
Wim Taymans
3091137217 rtpsession: avoid doing lip-sync in BYE 
When we get a BYE packet, don't do lip-sync with the SR inside because some
senders have trouble constructing valid SR packets after BYE.
 2009-08-11 02:30:47 +01:00
Wim Taymans
3747ede14a rtpbin: don't do lip-sync after a BYE 
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
 2009-08-11 02:30:47 +01:00
Wim Taymans
d2ef095b80 rtpbin: only reconsider once for BYE 
When iterating the sources of a BYE packet, don't signal a reconsideration for
each of them but signal after we handled all sources.
 2009-08-11 02:30:47 +01:00
Olivier Crête
e8c6bcdf8d rtpsession: Free conflicting addresses on finalize 2009-08-11 02:30:46 +01:00
Wim Taymans
428368b44a rtpbin: use new method for netaddress to string 2009-08-11 02:30:46 +01:00
Wim Taymans
512ba93159 rtpbin: do better cleanup of the src ghostpads 
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.

Fixes #561752
 2009-08-11 02:30:46 +01:00
Wim Taymans
d7a8663e05 rtpsession: add a comment 2009-08-11 02:30:46 +01:00
Wim Taymans
c53e595d23 rtpbin: add SDES property 
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
 2009-08-11 02:30:46 +01:00
Wim Taymans
9f330992f5 rtpbin: add SDES property that takes GstStructure 
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
 2009-08-11 02:30:46 +01:00
Wim Taymans
d8496fb105 rtpbin: removed old gstrtpclient 2009-08-11 02:30:45 +01:00
Branko Subasic
779f67adc4 rtpbin: add support for buffer-list 
Add support for sending buffer-lists.
Add unit test for testing that the buffer-list passed through rtpbin.

fixes #585839
 2009-08-11 02:30:45 +01:00
Tim-Philipp Müller
c5793a6a45 Make build without warnings with debugging disabled 2009-08-11 02:30:45 +01:00
Olivier Crête
cf873498d2 rtpbin: Transform the right session sdes message 
Fixes #584165
 2009-08-11 02:30:45 +01:00
Olivier Crête
dee142a945 Add ssrc to application/x-rtp-source-sdes structure 2009-08-11 02:30:45 +01:00
Wim Taymans
bf15048f42 rtpsouce: the network address is in network order 
Bring the network address in netowkr byte order to the host order.
 2009-08-11 02:30:45 +01:00
Wim Taymans
91eef69131 rtpsource: byteswap the port from GstNetAddress 
Since the port in GstNetAddress is in network order we might need to byteswap it
before adding it to the source statistics.
 2009-08-11 02:30:45 +01:00
Wim Taymans
51251d0fa8 rtpbin: remove ptdemux ghostpads 2009-08-11 02:30:44 +01:00
Wim Taymans
7d9c2d20df rtpbin: add to new signal to remove SSRC pads 2009-08-11 02:30:44 +01:00
Ali Sabil
6c684e59c6 ssrcdemux: emit signal when pads are removed 
Add action signal to clear an SSRC in the ssrc demuxer.
Add signal to notify of removed ssrc.

See #554839
 2009-08-11 02:30:44 +01:00
Wim Taymans
48872d8215 rtpbin: use our ghostpads instead of its target 
Since we keep a reference to our ghostpads, we can use them to track sessions.
This avoid us having to mess with the target of the ghostpad.
 2009-08-11 02:30:44 +01:00
Wim Taymans
901b7f3b69 rtpbin: don't warn when getting request pads twice 
Allow getting the request pads multiple times, just return the previously
created pads.
 2009-08-11 02:30:44 +01:00
Wim Taymans
0ae6e3603b rtpsource: add RTP and RTCP source address 
Add the RTP and RTCP sender addresses in the stats structure.
 2009-08-11 02:30:44 +01:00
Wim Taymans
62727e8fab rtpsession: reuse source code for SDES 
Reuse the RTPSource object property instead of duplicating code.
 2009-08-11 02:30:44 +01:00