Commit graph

17340 commits

Author SHA1 Message Date
Tim-Philipp Müller
accde6ea16 tests: parse-launch: looks clean nowadays, so re-enable for valgrind
Also, the valgrind bits weren't hooked up properly anyway,
checking the wrong define.
2016-09-26 12:12:12 +01:00
Tim-Philipp Müller
e04d2f230d meson: remove incorrect and unneeded check for ptrdiff_t
Need to include stddef.h for it, so this would've worked:
if cc.has_type('ptrdiff_t', prefix: '#include <stddef.h>')
2016-09-24 18:22:26 +01:00
Tim-Philipp Müller
557e06a6f1 meson: fix internal printf for %ll format modifier on 32-bit systems
gst/gstprintf unit test would fail on 32-bit x86 with:
gstprintf.c:83:printf_I32_I64:0: 'str' (64-bit x value = b5a6978f) is not equal to '"64-bit x value = f1e2d3c4b5a6978f"'
2016-09-24 18:12:46 +01:00
Nirbheek Chauhan
f8e3637dc7 Revert "meson: Force gstenum_h to be built when using gst_dep"
This reverts commit cfc565e2d8.

The commit was redundant since gst_gen_sources already contains
gstenum_h. We're still investigating why some people are still seeing
a racy build failure.
2016-09-23 04:21:42 +05:30
Nirbheek Chauhan
cfc565e2d8 meson: Force gstenum_h to be built when using gst_dep
This forces gstenumtypes.h to be built whenever something uses gst_dep
as a subproject dependency. This is needed since gst/gst.h includes
gstenumtypes.h

Closes https://github.com/mesonbuild/meson/issues/714 which is not
actually a Meson bug.
2016-09-23 00:28:55 +05:30
Sebastian Dröge
bf1c12342a bin: Add forgotten "git commit --amend" for last commit
Need to cast away the const as g_queue_foreach() takes a non-const GQueue*
2016-09-19 10:07:51 -04:00
Kouhei Sutou
a43de49d52 bin: When copying the sort iterator, also copy its internal queue
Otherwise both iterators share the same references, the second one
usually resulting in a crash when being freed.

https://bugzilla.gnome.org/show_bug.cgi?id=771649
2016-09-19 10:04:55 -04:00
Carlos Rafael Giani
5de03542ea queue2: Fix watermark test
This carries over code for a similar test from multiqueue to ensure full
control over the dataflow while testing. (The previous attempt was racy
since the fill level changed without any thread sync with the test code.)

https://bugzilla.gnome.org/show_bug.cgi?id=771210
2016-09-17 10:00:34 +01:00
Carlos Rafael Giani
7413064f06 queue2: Update buffering if its enabled and low/high watermarks are changed
https://bugzilla.gnome.org/show_bug.cgi?id=771210
2016-09-17 09:54:29 +01:00
Arun Raghavan
4cc0254df1 message: Fix documentation for gst_message_new_duration()
Seems like there was some documentation left over from when this was
gst_message_new_duration().
2016-09-15 17:39:32 +05:30
Sebastian Dröge
dc0ed9a5eb basesink: Remove unused fields and always use the buffer timestamp difference for calculating the QoS proportion
The buffer timestamps are only hints and more often than not have
nothing to do with reality.

https://bugzilla.gnome.org/show_bug.cgi?id=771306
2016-09-15 10:56:58 +02:00
Nirbheek Chauhan
b6e69ffdfb gstconfig: Use __declspec when built with MinGW and linking with MSVC
Earlier we were only using __declspec(dllexport/import) when we were
built with MSVC because when built with MinGW and linking with MinGW we
don't need it (and we get linker errors because of it).

However, when we're built with MinGW and someone wants to link to us
with MSVC, we still need the prototypes to have __declspec(dllimport)
since MSVC cannot do auto-import like GCC can.

https://bugzilla.gnome.org/show_bug.cgi?id=771029
2016-09-13 13:46:19 +05:30
Sebastian Dröge
c7e0299d24 bin: Also don't *unset* element flags if they're in the suppressed flags
Otherwise our bin might lose various flags that were explicitly set on
it at arbitrary times.
2016-09-12 17:07:09 +02:00
Thiago Santos
29c3b8b4d5 tests: gstbin: add tests for suppressed flags
Some simple tests to make sure it keeps working
2016-09-10 13:28:25 -03:00
Wonchul Lee
978b7ace52 bin: Add setter and getter to suppress element flags
Suppress-flags is for preventing propagation of child element's specific
flag when it is added to the bin.

https://bugzilla.gnome.org/show_bug.cgi?id=770627
2016-09-10 13:28:21 -03:00
Jan Schmidt
7912f37e34 Automatic update of common submodule
From b18d820 to f980fd9
2016-09-10 20:50:48 +10:00
Graham Leggett
84fcec0065 gst: Ensure gst_value is initialised before gst_tag
Otherwise GST_TYPE_FRACTION will work correctly in tags.

https://bugzilla.gnome.org/show_bug.cgi?id=753922
2016-09-10 10:59:40 +03:00
Sebastian Dröge
1b7ab25512 element: Reset the stop position to NONE in seek_simple()
When using seek_simple() in combination with other kinds of seeks, this
becomes problematic. seek_simple() does not reset the stop position to
GST_CLOCK_TIME_NONE but keeps whatever a previous seek did. So for example
when doing a seek_simple() after a rate=-1 seek, we would usually get
assertions that start>stop (and stop being the old stop from the rate=1 seek).

https://bugzilla.gnome.org/show_bug.cgi?id=771104
2016-09-10 10:58:44 +03:00
Jan Schmidt
1ac2a7c388 Automatic update of common submodule
From f49c55e to b18d820
2016-09-10 09:53:42 +10:00
Thibault Saunier
006add672e meson:tests: Bump timeout to 3 minutes
Basically we already have each test with a 20sec timeout,
and testsuite can last more than the default 30secs from
meson. 3 minutes is another arbitrary timeout but should
be good enough.
2016-09-09 09:38:21 -03:00
Sebastian Dröge
c1bd6677c6 basesink: Use the average durations based on timestamps for the QoS proportion when doing trickmodes
The durations of the buffers are (usually) assuming that no frames are being
dropped and are just the durations coming from the stream. However if we do
trickmodes, frames are being dropped regularly especially if only key units
are supposed to be played.

Fixes completely bogus QoS proportion values in the above case.
2016-09-08 15:19:38 +03:00
Thibault Saunier
7315a07bc8 meson: Fix building with meson 0.34 2016-09-05 18:07:49 -03:00
Thibault Saunier
ed61bff072 meson: Allow others to build GIR files when using GStreamer as subproject
And add a way to disable the introspection and bump version to 1.9.2
2016-09-05 12:39:12 -03:00
Sebastian Dröge
b3a8885e35 gstconfig.h.in: Add another version of the SH4 #define and S390x
https://bugzilla.gnome.org/show_bug.cgi?id=770731
2016-09-05 11:11:29 +03:00
Wim Taymans
0abb6e1a42 config: newer gcc doesn't know __ppc__ and __ppc64__ anymore
__ppc__ and __ppc64__ are non-standard defines, we should use
__powerpc__ and __powerpc64__ instead because newer gcc doesn't know
them anymore.
2016-09-05 09:50:17 +02:00
Tim-Philipp Müller
ad537a2d51 tools: gst-inspect: add * for pointer signal arguments where needed
Print GObject argument properly with pointer marker:

  "client-added" :  void user_function (GstElement* object,
                                        GObject* arg0,
                                        gpointer user_data);

instead of

  "client-added" :  void user_function (GstElement* object,
                                        GObject arg0,
                                        gpointer user_data);

for gst-inspect-1.0 tcpserversink.
2016-09-04 20:39:31 +01:00
Tim-Philipp Müller
1b1459b0a6 tests: don't build misc subdir if both examples and benchmarks have been disabled
https://bugzilla.gnome.org/show_bug.cgi?id=770740
2016-09-02 23:22:17 +01:00
Wim Taymans
0e8ebbe590 config: support System z 2016-09-01 14:13:40 +02:00
Sebastian Dröge
d0a21df27c Back to development 2016-09-01 12:25:23 +03:00
Sebastian Dröge
a80e51da10 Release 1.9.2 2016-09-01 12:24:45 +03:00
Sebastian Dröge
dd4b9bb4b3 po: Update translations 2016-09-01 11:22:45 +03:00
Carlos Rafael Giani
5988095f90 multiqueue: Add higher-resolution low/high-watermark properties
low/high-watermark are of type double, and given in range 0.0-1.0. This
makes it possible to set low/high watermarks with greater resolution,
which is useful with large multiqueue max sizes and watermarks like 0.5%.

Also adding a test to check the fill and watermark level behavior.

https://bugzilla.gnome.org/show_bug.cgi?id=770628
2016-08-31 12:56:19 +03:00
Carlos Rafael Giani
67874ea86d multiqueue: Distinguish between buffering percentage and buffering level
To make the code clearer, and to facilitate future improvements, introduce
a distinction between the buffering level and the buffering percentage.

Buffering level: the queue's current fill level. The low/high watermarks
are in this range.

Buffering percentage: percentage relative to the low/high watermarks
(0% = low watermark, 100% = high watermark).

To that end, get_percentage() is renamed to get_buffering_level(). Also,
low/high_percent are renamed to low/high_watermark to avoid confusion.
mq->buffering_percent values are now normalized in the 0..100 range for
buffering messages inside update_buffering(), and not just before sending
the buffering message. Finally the buffering level range is parameterized
by adding a new constant called MAX_BUFFERING_LEVEL.

https://bugzilla.gnome.org/show_bug.cgi?id=770628
2016-08-31 12:56:19 +03:00
Carlos Rafael Giani
e83412b4fd multiqueue: Rename percent/percent_changed to buffering_percent(_changed)
This is a prerequisite for subsequent commits, and makes queue2 and
multiqueue code a little more consistent.

https://bugzilla.gnome.org/show_bug.cgi?id=770628
2016-08-31 12:56:19 +03:00
Edward Hervey
3117525cb6 multiqueue: Fix high_time wakeup logic
When calculating the high_time, cache the group value in each singlequeue.

This fixes the issue by which wake_up_next_non_linked() would use the global
high-time to decide whether to wake-up a waiting thread, instead of the group
one, resulting in those threads constantly spinning.

Tidy up a bit the waiting logic while we're at it.

With this patch, we go from 212% playing a 8 audio / 8 video file down to less
than 10% (most of it being the video decoding).

https://bugzilla.gnome.org/show_bug.cgi?id=770225
2016-08-30 12:28:40 +03:00
Tim-Philipp Müller
3cae933579 tools: gst-inspect: don't print internal pad request function name
This just confuses people, they look at it and try to call it
directly by name, instead of using the public GstElement API.
It stands to reason that it goes without saying that when an
element provides request pads that they can actually be
requested using the standard API, and there's no point in
printing internal implementation details of the element.
2016-08-28 16:04:27 +01:00
Thibault Saunier
4714ef2f8e Make use of the new GST_ELEMENT_FLOW_ERROR API all around.
https://bugzilla.gnome.org/show_bug.cgi?id=770158
2016-08-27 09:33:20 -03:00
Thibault Saunier
da73b89200 element: Add API to more easily post messages about flowing issues
In many parts of the code we raise streaming error when the flow
goes wrong, and each time we create more or less similare error
message. Also that message does not let the application know what
has actually gone wrong. In the new API we add a "flow-return" detail
field inside the GstMessage so that the application has all the information
if it needs it.

API:
    GST_ELEMENT_FLOW_ERROR

https://bugzilla.gnome.org/show_bug.cgi?id=770158
2016-08-27 09:33:20 -03:00
Nirbheek Chauhan
22b892b44f gstconfig: Decide GST_EXPORT declaration style at build time
We only use GST_EXPORT consistently when building with MSVC by using the
visual studio definitions files (win32/common/*.def), so always disable
it when building with Autotools and only enable it with Meson when
building with MSVC.

This allows you to use MinGW to link to a GStreamer built with MSVC and
get the correct function prototypes to find functions and variables in
DLLs.
2016-08-26 15:20:50 +01:00
Wonchul Lee
c7e8b062e3 docs: fix typo in stream selection docs
https://bugzilla.gnome.org//show_bug.cgi?id=770428
2016-08-26 14:21:43 +01:00
Tim-Philipp Müller
3cba95ca2a element: rename gst_element_message_new_details() to gst_make_element_message_details()
Fixes g-i warning "Gst: Constructor return type mismatch
symbol='gst_element_message_new_details' constructed='Gst.Element'
return='Gst.Structure'".

This is a newly-added function in git that has not been in a stable
release yet, so it's fine to rename it. It's also only used indirectly
via macros.
2016-08-26 12:56:40 +01:00
Tim-Philipp Müller
26797d0714 docs: fix various gtk-doc warnings
e.g. "warning: multi-line since docs found"
2016-08-26 12:35:23 +01:00
Tim-Philipp Müller
89f5df1782 g-i: info: allow passing NULL to gst_debug_remove_log_function()
Useful for removing the default handler from bindings.
2016-08-26 12:05:16 +01:00
Thibault Saunier
d18fff7ff5 meson: doc: Fix building documentation when using subprojects
and check the presence of gtk-doc before building the documentation
2016-08-25 15:10:33 -03:00
Jan Schmidt
a95645eaba value: Implement can_intersect for GstFlagSet types
Make sure that gst_value_can_intersect returns TRUE
for GstFlagSet combinations that can successfully
intersect
2016-08-26 03:23:40 +10:00
Carlos Rafael Giani
db66cb51b3 queue2: Add higher-resolution low/high-watermark properties
low/high-watermark are of type double, and given in range 0.0-1.0. This
makes it possible to set low/high watermarks with greater resolution,
which is useful with large queue2 max sizes and watermarks like 0.5%.

Also adding a test to check the fill and watermark level behavior.

https://bugzilla.gnome.org/show_bug.cgi?id=769449
2016-08-25 11:54:33 +03:00
Carlos Rafael Giani
e0f1a9e618 queue2: Distinguish between buffering percentage and buffering level
To make the code clearer, and to facilitate future improvements, introduce
a distinction between the buffering level and the buffering percentage.

Buffering level: the queue's current fill level. The low/high watermarks
are in this range.

Buffering percentage: percentage relative to the low/high watermarks
(0% = low watermark, 100% = high watermark).

To that end, get_buffering_percent() is renamed to get_buffering_level(),
and the code at the end that transforms to the buffering percentage is
factored out into a new convert_to_buffering_percent() function. Also,
the buffering level range is parameterized by adding a new constant called
MAX_BUFFERING_LEVEL.

https://bugzilla.gnome.org/show_bug.cgi?id=769449
2016-08-25 11:54:33 +03:00
Tim-Philipp Müller
1e1ea38b8e docs: release: add tag signing command 2016-08-23 10:52:32 +01:00
Arjen Veenhuizen
cf6cac07dd buffer: add explicit getters and setters for buffer flags
These can be used from bindings.

https://bugzilla.gnome.org/show_bug.cgi?id=768301
2016-08-22 18:59:06 +01:00
Tim-Philipp Müller
63fa65f777 meson: install libgstcheck-1.0 and add api version to name 2016-08-22 00:03:32 +01:00