It works the same as the 'tune' property that is used only to signal
the element that it should tune, but it is more natural to be used
as a signal rather than a property.
It is also proxied at the dvbbasebin element
ISDB-T and ISDB-Tb (the Brazilian variant) are the
terrestial DTV standards used by Japan, Philippines,
Maldives, Thailand, most South American countries
and Botswana. Changeset adds the set of previously
missing (and required) ISDB-T parameters, adapter
and frontend setup logic and proxies the new
properties on dvbbasebin.
Tested to work with the live aerial broadcast by
Tv Paraíba HD in Campina Grande (Brazil).
https://bugzilla.gnome.org/show_bug.cgi?id=732875
Allows proper tuning around high/low band boundaries when using
non "standard" LNBs.
Not all LNBs (Low noise block down converters) are made equal.
This is particularly true for universal LNBFs, where, even though
there are seemingly standard values for the local oscillator
frequencies, these can vary from manufacturer to manufacturer
and LNB model. Change also proxies the new LNB properties in
dvbbasebin.
https://bugzilla.gnome.org/show_bug.cgi?id=732818
It was previously a mix and match of both variants, introducing just too much
confusion.
The prefix are from now on:
* GstMpegts for structures and type names (and not GstMpegTs)
* gst_mpegts_ for functions (and not gst_mpeg_ts_)
* GST_MPEGTS_ for enums/flags (and not GST_MPEG_TS_)
* GST_TYPE_MPEGTS_ for types (and not GST_TYPE_MPEG_TS_)
The rationale for chosing that is:
* the namespace is shorter/direct (it's mpegts, not mpeg_ts nor mpeg-ts)
* the namespace is one word under Gst
* it's shorter (yah)
usecount is unsigned, so too many "unuse" will wrap the counter
around and the >= 0 check will always be fine.
It would be much simpler to just make the counter signed, but
moving the checks where the decrements happen allow a mistake
to be detected earlier, and thus easier to debug.
Coverity 1139791
-add delsys property
-add delivery system capability to the gstreamer adapter structure
-ready for add new delivery systems
Application must ask the adapter structure to know which delivery systems are avaible.
The property delsys must be set.
https://bugzilla.gnome.org/show_bug.cgi?id=709414
Original commit message from CVS:
* sys/dvb/Makefile.am:
* sys/dvb/dvbbasebin.c:
Add URI Handler for dvb.
Re-order pad templates to workaround a bug in playbasebin.
* sys/dvb/parsechannels.c:
* sys/dvb/parsechannels.h:
Add code to parse channels from zap-style channels.conf files.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_get_property):
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_show_frame):
* gst/mve/gstmvemux.c: (gst_mve_mux_request_new_pad):
* sys/dvb/dvbbasebin.c: (dvb_base_bin_class_init):
Fix 'xyz may be used uninitialized' compiler warnings caused
by broken g_assert_not_reached() macro in GLib-2.15.x and don't
abort() in any case but properly report the error.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
A sub table is identified by the pair table_id and
sub_table_identifier, not by pid. So hash with that.
* sys/dvb/dvbbasebin.c:
Make sure initial pids are added properly to filter,
Original commit message from CVS:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Remove signals for pat, pmt, nit, eit, sdt. Replace with bus
messages.
* sys/dvb/dvbbasebin.c:
Instead of attaching to signals, use the bus messages.
Also fix up so the dvbsrc starts only outputting the info tables
like PAT, CAT, NIT, SDT, EIT instead of the whole ts.
Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
pat-info is now a signal not a GObject property that
gets notified.
pat-info, pmt-info now instead of passing a GObject as
a parameter, pass a GstStructure.
New signals: nit-info, sdt-info, eit-info for DVB SI information
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
Cam code now uses the pmt GstStructure passed from mpegtsparse
signals rather than the GObject.
* sys/dvb/dvbbasebin.c:
Use new signals in mpegtsparse and use GstStructures as per
mpegtsparse's modified API.
Original commit message from CVS:
patch by: Alessandro Decina
* sys/dvb/Makefile.am:
* sys/dvb/cam.c:
* sys/dvb/cam.h:
* sys/dvb/camapplication.c:
* sys/dvb/camapplication.h:
* sys/dvb/camapplicationinfo.c:
* sys/dvb/camapplicationinfo.h:
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camresourcemanager.c:
* sys/dvb/camresourcemanager.h:
* sys/dvb/camsession.c:
* sys/dvb/camsession.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camtransport.c:
* sys/dvb/camtransport.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
* sys/dvb/dvbbasebin.c:
* sys/dvb/dvbbasebin.h:
* sys/dvb/gstdvb.c:
* sys/dvb/gstdvbsrc.c:
* sys/dvb/gstdvbsrc.h:
Integrate SoC work done by Alessandro for the Freevo project.
Adds cam support to the dvb stack in GStreamer and a new
element (actually a bin) called dvbbasebin that integrates
dvbsrc and mpegtsparse to a) handle decryption and b) allow
acquiring multiple channels on same transponder without
knowing pid numbers.
