We're happy to accept both byte-stream and avc, advertise
that on the sink caps and fix up _get_caps() function to
not just return "video/x-h264".
https://bugzilla.gnome.org/show_bug.cgi?id=606662
A JPEG image inside an RTP stream has a preceeding RFC2435 header that
conveys width/height. The dimensions in this header are limited to be
multiples of 8. Since JPEG uses an MCU of 8x8 pixels any image must
already indirectly have image data dimensions that are rounded up in
order to contain enough data to render the image. Therefore this fix
safely rounds the image dimensions in the RFC2435 header up to the
closest multiple of 8.
The RTP clock-rate used for G722 is 8000, even though the samplerate is
16000. Compensate for this by pretending G722 has 8 bits per sample
instead of the 4 bits as if it were a codec that ran at half the speed,
but with twice the number of bits. Fixes#661376
Some h264 payloaders are unfortunately buggy and don't correctly set the
E bit in FU-A NAL when they have ended. Work around this by assuming
such a fragmentation unit has ended when there was no packet loss and a
new NAL is started
... which is particularly needed when merging NAL units, where not resetting
would lead to output of an older (pre-flush) AU (with unintended timestamp).
Don't use g_assert() for error handling, even if they're highly unlikely.
Either we *know* that something can't happen, in which case we
should just not handle it, or we think something can happen, but it is
very very unlikely that it will ever happen, in which case we should
handle it like any other error instead of asserting.
g_assert() is best left for conditions we have control of, like checking
internal consistency of our code, not checking return values of external
code.
Fixes a bunch of warnings when compiling with -DG_DISABLE_ASSERT:
gstrtpgsmpay.c: In function 'gst_rtp_gsm_pay_handle_buffer':
gstrtpgsmpay.c:130:17: warning: variable 'rtpgsmpay' set but not used
gstspeexenc.c: In function 'gst_speex_enc_encode':
gstspeexenc.c:904:19: warning: variable 'written' set but not used
pulsesink.c: In function 'gst_pulsesink_change_state':
pulsesink.c:2725:9: warning: variable 'res' set but not used
pulsesrc.c: In function 'gst_pulsesrc_change_state':
pulsesrc.c:1253:7: warning: variable 'e' set but not used
GCC 4.6.x spits warnings about variables that are unused but set. Such
variables have been removed where trivial but with comments left behind
for informational purposes in some cases.
gst_rtp_session_chain_recv_rtcp () was changed in commit 490113d4
to always return GST_FLOW_OK instead of the return value of
rtp_session_process_rtcp (), so we'll keep it that way.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
If we get GAP samples, there is no need to transmitt it.
In some situations, microphone is muted, we can drop net traffick
usage to ~1 kbit/s. Without patch it will stay ~20 kbit/s
Theora can only use the last frame (or the keyframe) as a reference, so in
practice. If we receive a buffer that references an unknown codebook, request
new headers. It probably means that headers were lost.
Improve parsing of the samplerate.
Parse the framelen so that we can calculate timestamps.
When interpollate the incomming timestamp on outgoing buffers when there are
multiple subframes.
fixes#625825
atof() converts strings according to the current locale, but the
framerate string will likely always use a dot as floating point
separator, so use g_ascii_strtod() instead (but also canonicalise
the string before, so we can handle both formats as input).
... thereby (partially) deprecating properties currently controlling whether
or not byte-stream output or NAL/AU alignment (though properties still determine
fallback if nothing specified in caps).
Fixes#606662.
Use 3 adapters, one to accumulate paketization units, another on to accumulate
tiles and a last one to accumulate the final frame.
Don't just blindly flush the adapter on DISCONT but only discard the current
packetization unit.
When we dropped jpeg2000 packets between SOP markers, adjust the SOT header with
the new lenght.
When parsing the bitstream, look for SOP markers because we are allowed to split
packets on those marker boundaries.
Rework the parsing code a little so that we can pack multiple Packetization
units in one RTP packet.
Only set the delta flag when all of the units in the packet are delta units.
Based on patch from Olivier Crête <olivier.crete@collabora.co.uk>
Fixes#632945
Incomming buffer is only pushed on the adapter at the end of the
handle_buffer function. But duration/timestamp of this buffer is already
taken into account for the current data in the adapter. This leads to
wrong rtp timestamps and extra latency.
Put a DISCONT event on the next output buffer when the input buffer had a
DISCONT.
Make sure we clear our adapter and reset our state before going to PAUSED.
Free the qtables.
Fixes#626869
Although the spec says that the clock-rate should always be 90000, some rtsp
servers send different clock-rates so we must accept then in order to handle
those streams too.
When we can't find any channel or encoding-params on the caps for dynamic
payload types, set the default number of channels to 1, as the spec says we
should.
See #623209
When parsing the number of channels, use the encoding-params property from the
RTP caps because that is where we can find the channels according to the spec.
Fall back to the channels property in the caps when needed.
Fixes#623209
G729 packets may only occur intermittently (e.g. cn packets), and as such
do not allow for perfect-rtptime calculating rtp times based on frame or byte
count. In particular, do not use rtp audio base payloader as base class, but
rather base payloader directly.
Even though we don't use delivery-method in our payloader, older versions of
the theora payloader in gstreamer required it. As such we need to keep this
around in the caps for backwards-compatibility.
This reverts part of 49463a37cbFixes#618940
When we calculate the frame duration, we need to use the amount of
frames in the _previous_ packet, not the current packet. The frame duration is
needed to correctly de-interleave interleaved streams. This fixes the case where
there are a variable number of frames in a packet.
Fixes#620494
It probably will not be in the final RFC as it is not in RFC 5215 for Vorbis.
If there is a configuration specified, assume it is in-line and if nothing is
specified, assume it is in-band.
https://bugzilla.gnome.org/show_bug.cgi?id=618386
Don't blindly add the durations of incomming buffers to the total queued
duration because it might be invalid. Mark the total queued duration invalid
when we receive an invalid incomming timestamp because that's when we lose track
of the total queued duration.
Fixes#618324
Add a new config-interval property to instruct the payloader to insert
configuration headers at periodic intervals in the stream
(when a keyframe is countered).
Add a new config-interval property to instruct the payloader to insert
config (VOSH, VOS, etc) at periodic intervals in the stream
(when a GOP or VOP-I is encountered).
Based on patch by <marc.leeman at gmail.com>
Fixes#607452.
... which evidently makes (most) sense if output buffers are
actually frames.
Partially based on a patch by
Miguel Angel Cabrera <mad_aluche at hotmail.com>
Fixes#609658.
So we stop dropping fragments as soon as there is a picture start (code).
In particular, this prevents dropping the first frame following
initial DISCONT.
... rather than falling back to sending the whole frame in one packet
if number of GOB startcodes < maximum.
One might take this further and still perform Mode B/C payloading,
but at least this should cater for decent fragments in typical cases.
Fixes#599585.
in rtph264depay.c, lines 577-576, NALU-type 24 (Single-Time Aggregation
Packet) is handled in fall-through as NALU-type 26 (unhandled).
This leads high quality h264 streams such as:
rtsp://stream.yle.mobi/yle/areena/MEDIA_E0342657_p3.mp4
to fail with "NAL unit type 24 not supported yet" (but it's actually
supported), and thus to close any stream which contains STAPs.
The proposed one-liner patch fixes the issue.
Fixes#615051.
When no constantDuration has been given in the caps, try to derive one from the
timestamp difference between packets. Also keep doing this for each packet
because some broken streams might simply provide wrong timestamps.
The profile-level-id represents restrictions on what can be sent, it does not
describe the stream. So it should be reflected in the sink caps of the
payloader, not the src caps.
https://bugzilla.gnome.org/show_bug.cgi?id=607353
Use GstRTPBaseAudioPayload as the base class. This saves a lot of code and fixes
a bunch of problems that were already solved in the base class.
Fixes#853367
Add a new spspps-interval property to instruct the payloader to insert
SPS and PPS at periodic intervals in the stream.
Rework the SPS/PPS handling so that bytestream and AVC sample code both use the
same code paths to handle sprop-parameter-sets. This also allows to have the AVC
code to insert SPS/PPS like the bytestream code.
Fixes#604913
celtdepay : added default framesize(480) channels(1) and clockrate(32000)
depay_setcaps : now gets channels and framesize from string with default value
depay_process : now adds timestamp to outbuf
Added frame_size to GstRtpCeltDepay
Changed some GST_DEBUG to GST_DEBUG_OBJECT or GST_LOG_OBJECT
celtpay : getcaps : gets channel and framesize and sets caps
Added frame-size to static caps for audio/x-celt
In case of non-interleaved (= sequentially payloaded) streams,
the AU-Index serves little purpose (that is not already covered by
RTP fields). (Broken) Payloaders might consider this field then
to be disregarded and have non spec compliant values, e.g. each
RTP packet having AU-Index 2 (rather than 0). As such, ensure/force
simple sequential sending of non-interleaved streams.
Whenever we see a gap, we flush the temporary packets (but not the adapter). If we
had some data temporarily stored it will be outputted (the sound will sound a bit
garbled... but that's how it sounds on MacOSX :)
Reverse-engineered by comparing:
* A rtp hinted file provided by DarwinStreamingServer
* The output procued by DSS for that same file
Also used various streaming sources available on the internet to fine-tune
the code.
The header/codec_data extraction methods are from FFMpeg (LGPL).
Use some of the SDP attributes when they are present to specify the output
dimension and framerate. This allows us to receive jpeg frames larger than
2040 width/height.
Fixes#564437
Rewrite the quant table parsing to also handle multiple tables in one JPEG HDQ
segment.
Handle more jpeg types by keeping track of the tables used per component and
putting the used ones in the quant headers.
Don't require width/height on the caps. Use the SOF header to find width/height
and fall back to the caps if there is no SOF. Also use the SOF info to find the
subsampling and quantization tables used. This allows us to set the right type
value in the JPEG rtp header.
Deprecate the quality property, it's unused now and it was used wrongly before.
Always send full quant tables for now until we have some code to detect default
ones.
Fixes#580880
Use the width and the height from the payload headers and set them on the
output caps for added awesomeness.
Fix quant parsing, we need to check the type in the lower 6 bits.
Add first bits of caching quantization tables.
We implemented the AAL2 packing, add the encoding-name for those to the caps and
a property to force AAL2 decoding (always TRUE for now).
Implement RFC3551 unpacking for regular G726.
See #567140.
In the sequence of header lengths, for headers >127 bytes, we use
multiple bytes to encode the length. Bytes other than the last must have
the top (flag) bit set.
The audioMuxVersion structure is packed in such a way that the codec
data does not start byte-aligned, which means there's an extra bit of
padding at the end. We don't want that bit in the codec data, since
some decoders seem get confused when they're fed with an extra codec
data byte (also it's just not right of course).
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Original commit message from CVS:
* gst/rtp/gstrtpjpegdepay.c: (gst_rtp_jpeg_depay_process):
Add an EOI marker at the end of the jpeg frame when it's missing.
Fixes#563056.
Original commit message from CVS:
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_flush),
(gst_rtp_mp4v_pay_event):
Don't try to push packets before we could find a valid config
startcode. Fixes#563509.
Original commit message from CVS:
Patch by: Yotam <sh dot yotam at gmail dot com>
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_event):
Flush the remaining frames on EOS. Fixes#560641.
Original commit message from CVS:
* gst/rtp/gstrtpmpadepay.c: (gst_rtp_mpa_depay_setcaps):
* gst/rtp/gstrtpmpapay.c:
Narrow down the caps of the mpeg audio pay/depayloaders to only accept
mpeg version 1. Fixes#558427.
Original commit message from CVS:
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_flush),
(gst_rtp_L16_pay_getcaps):
Only put an integral amount of samples in the RTP packet.
Fixes#556641.
Original commit message from CVS:
* gst/rtp/gstrtpchannels.c: (gst_rtp_channels_get_by_index):
* gst/rtp/gstrtpchannels.h:
Add method to get possible channel positions.
Original commit message from CVS:
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_setcaps):
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps),
(gst_rtp_L16_pay_getcaps):
* gst/rtp/gstrtpchannels.c: (check_channels),
(gst_rtp_channels_get_by_pos), (gst_rtp_channels_get_by_order),
(gst_rtp_channels_create_default):
* gst/rtp/gstrtpchannels.h:
Add mappings for multichannel support. Does not completely just work
because the getcaps function does not yet return the allowed channel
mappings. See #556641.
Original commit message from CVS:
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_setcaps),
(gst_rtp_L16_depay_process):
Check if clock-rate and channels are valid.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpac3depay.c: (gst_rtp_ac3_depay_setcaps),
(gst_rtp_ac3_depay_process):
Don't ignore the return value of set_caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_setcaps),
(gst_rtp_amr_depay_process):
* gst/rtp/gstrtpamrdepay.h:
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set output caps on the buffers, the base class does that for
us.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpdvdepay.c: (gst_rtp_dv_depay_setcaps),
(gst_rtp_dv_depay_process), (gst_rtp_dv_depay_reset):
* gst/rtp/gstrtpdvdepay.h:
Clean up caps negotiation.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpg726depay.c: (gst_rtp_g726_depay_setcaps),
(gst_rtp_g726_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpg729depay.c: (gst_rtp_g729_depay_init),
(gst_rtp_g729_depay_setcaps), (gst_rtp_g729_depay_process):
* gst/rtp/gstrtpg729depay.h:
The subclass will make sure we are negotiated.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmdepay.c: (gst_rtp_gsm_depay_setcaps),
(gst_rtp_gsm_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmpay.c: (gst_rtp_gsm_pay_setcaps):
Clean up caps negotiation.
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_setcaps),
(gst_rtp_h263_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263pay.c: (gst_rtp_h263_pay_setcaps),
(gst_rtp_h263_pay_flush), (gst_rtp_h263_pay_handle_buffer):
* gst/rtp/gstrtph263pay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_setcaps),
(gst_rtp_h263p_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263ppay.c: (gst_rtp_h263p_pay_class_init),
(gst_rtp_h263p_pay_setcaps), (gst_rtp_h263p_pay_flush),
(gst_rtp_h263p_pay_handle_buffer):
* gst/rtp/gstrtph263ppay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_setcaps),
(gst_rtp_h264_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
Fix possible caps leak.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_setcaps):
Add some more debug info.
* gst/rtp/gstrtpilbcdepay.c: (gst_rtp_ilbc_depay_setcaps),
(gst_rtp_ilbc_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpilbcpay.c: (gst_rtpilbcpay_sink_setcaps):
Clean up caps negotiation.
* gst/rtp/gstrtpmp1sdepay.c: (gst_rtp_mp1s_depay_setcaps),
(gst_rtp_mp1s_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp2tdepay.c: (gst_rtp_mp2t_depay_setcaps),
(gst_rtp_mp2t_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_setcaps),
(gst_rtp_mp4a_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmp4apay.c: (gst_rtp_mp4a_pay_new_caps),
(gst_rtp_mp4a_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_setcaps),
(gst_rtp_mp4g_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4gpay.c: (gst_rtp_mp4g_pay_finalize),
(gst_rtp_mp4g_pay_new_caps), (gst_rtp_mp4g_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4vdepay.c: (gst_rtp_mp4v_depay_setcaps),
(gst_rtp_mp4v_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_new_caps),
(gst_rtp_mp4v_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpadepay.c: (gst_rtp_mpa_depay_setcaps),
(gst_rtp_mpa_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpmpapay.c: (gst_rtp_mpa_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpvdepay.c: (gst_rtp_mpv_depay_setcaps),
(gst_rtp_mpv_depay_process):
Clean up caps negotiation.
Actually set output caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmpvpay.c: (gst_rtp_mpv_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmadepay.c: (gst_rtp_pcma_depay_setcaps),
(gst_rtp_pcma_depay_process):
Clean up caps negotiation.
Set output buffer duration because we can.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmapay.c: (gst_rtp_pcma_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmudepay.c: (gst_rtp_pcmu_depay_setcaps),
(gst_rtp_pcmu_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmupay.c: (gst_rtp_pcmu_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_setcaps), (gst_rtp_speex_depay_process):
Clean up caps negotiation.
Set output caps on the pad and header buffers.
Set duration on output buffers because we can.
* gst/rtp/gstrtpspeexpay.c: (gst_rtp_speex_pay_parse_ident):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpsv3vdepay.c: (gst_rtp_sv3v_depay_setcaps),
(gst_rtp_sv3v_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
No need to set caps out output buffers, subclass does that.
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps),
(gst_rtp_theora_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtptheorapay.c: (gst_rtp_theora_pay_class_init),
(gst_rtp_theora_pay_flush_packet), (encode_base64),
(gst_rtp_theora_pay_finish_headers), (gst_rtp_theora_pay_parse_id),
(gst_rtp_theora_pay_handle_buffer):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_setcaps),
(gst_rtp_vorbis_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_finish_headers):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvrawdepay.c: (gst_rtp_vraw_depay_setcaps):
Clean up caps negotiation, don't ignore setcaps return.
* gst/rtp/gstrtpvrawpay.c: (gst_rtp_vraw_pay_setcaps):
Don't ignore the return value of set_outcaps.
Original commit message from CVS:
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_class_init),
(gst_rtp_amr_depay_process):
Mark DISCONT on output buffers when the marker bit signals a new talk
spurt.
* gst/rtp/gstrtpamrpay.c: (gst_rtp_amr_pay_handle_buffer):
Set the marker bit for buffers with a DISCONT flag to signal a talk
spurt.
Original commit message from CVS:
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_init),
(gst_rtp_mp4g_depay_finalize), (gst_rtp_mp4g_depay_setcaps),
(gst_rtp_mp4g_depay_clear_queue), (gst_rtp_mp4g_depay_flush_queue),
(gst_rtp_mp4g_depay_queue), (gst_rtp_mp4g_depay_process),
(gst_rtp_mp4g_depay_change_state):
* gst/rtp/gstrtpmp4gdepay.h:
Handle interleaved streams by reordering AU in a queue.
Original commit message from CVS:
* gst/rtp/gstrtpmp4gdepay.c: (gst_bs_parse_init),
(gst_bs_parse_read), (gst_rtp_mp4g_depay_process):
Change some of the ranges in the caps, mostly for the amount of bits we
can use.
Added a little bitstream parse and use it to parse the AU header fields.
Check for malformed and wrongly sized packets better.
Implement more header field parsing.
Handle the size of fragmented packets correctly.
Original commit message from CVS:
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_process):
* gst/rtp/gstrtpspeexdepay.h:
Revert last change: Only the jitterbuffer is able to convert RTP to
Gstreamer timestamps and normal (de)payloaders should simply copy it.
Reopens bug #541787.
Original commit message from CVS:
* gst/rtp/gstrtpvrawdepay.c:
Include stdlib.h for atoi().
* gst/rtsp/gstrtspsrc.c:
Use floating point math for latencies < 0 sec in log output.
Original commit message from CVS:
Patch by: Tomasz Grobelny <tomasz at grobelny dot oswiecenia dot net>
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_process):
* gst/rtp/gstrtpspeexdepay.h:
Take timestamp from the RTP packet as a first step to fix problems
with transmission over RTP when the network is not reliable.
Fixes bug #541787.
Original commit message from CVS:
* gst/rtp/gstrtpg726pay.c: (gst_rtp_g726_pay_setcaps):
No need to check for audio/G723 and audio/32KADPCM here as they are
no longer supported.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps):
Make the delivery-method mandatory on the caps and only accept inline
for now.
Reverse strcmp checks for delivery-method.
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_setcaps):
Make delivery method optional when parsing caps and note this in the
caps.
Reverse strcmp checks for delivery-method.
* gst/rtp/gstrtpvorbispay.c:
Update a comment to note that the delivery-method is optional,
Fixes#537675.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtptheorapay.c:
The Theora RTP payloader only supports the "inline" delievery method
so let's declare this on the caps of the static pad template.
Fixes bug #537675.
Original commit message from CVS:
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_class_init),
(gst_rtp_h264_depay_init), (gst_rtp_h264_depay_set_property),
(gst_rtp_h264_depay_get_property), (gst_rtp_h264_depay_setcaps),
(gst_rtp_h264_depay_process):
* gst/rtp/gstrtph264depay.h:
Add experimental support for outputting quicktime-like AVC output in
addition to the existing bytestream output.
* gst/rtp/gstrtph264pay.c: (gst_h264_scan_mode_get_type),
(gst_rtp_h264_pay_class_init), (gst_rtp_h264_pay_init),
(gst_rtp_h264_pay_setcaps), (gst_rtp_h264_pay_payload_nal),
(gst_rtp_h264_pay_handle_buffer), (gst_rtp_h264_pay_set_property),
(gst_rtp_h264_pay_get_property):
* gst/rtp/gstrtph264pay.h:
Make the parsing mode configurable, for some inputs we don't need to
scan every byte for start codes.
Only set the marker bit on ACCESS units.
Original commit message from CVS:
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_process):
Small comment added.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_class_init),
(gst_rtp_h264_pay_decode_nal), (gst_rtp_h264_pay_parse_sps_pps),
(gst_rtp_h264_pay_payload_nal), (gst_rtp_h264_pay_handle_buffer):
Debug string cleanups (remove trailing \n)
Refactor and clean up the payloader a bit and make sure that we only
put one NAL unit in an RTP packet even if the input buffer contains
multiple NAL units.
Add suport for AVC format input.