We don't currently support setting the pixel-aspect-ratio from V4L2. So
simply set it to be 1/1 in the caps to prevent negotiation failures when
fixating to weird values (e.g. when the downstream caps has
pixel-aspect-ratio = [ MIN, MAX ] )
https://bugzilla.gnome.org/show_bug.cgi?id=663580
Some drivers are buggy are will change the current format when
processing VIDIOC_TRY_FMT. Save and restore the current format
to ensure the format is kept unchanged.
https://bugzilla.gnome.org/show_bug.cgi?id=649067
When nobody is using our pool, activate it ourselves.
Avoid leaking the buffer array.
Set default pool configuration with caps.
Don't keep current_caps, core does that for us now.
Use the more specialized type for the bufferpool.
Use the size from the driver as the size of the image to read.
Don't configure the pool when created. This will be done in the setup_allocation
method later or by upstream for sinks.
Remove unused properties and variables. Bufferpool sizes are now configured in
the bufferpool by the elements in the pipeline. We might want to influence the
pool size later somehow.
Remove old method, use neww _process method for the sink.
Inform the parent bufferpool class about the settings too. This is needed to let
it know about the max-buffers.
Allocate the negotiated max-buffers and initially mmap min-buffers. The idea is
that the bufferpool will allocate more when needed.
Improve debugging.
Only poll in capture mode, it does not seem to work in playback mode on this
beagleboard.
Add different transport methods to the bufferpool (MMAP and READ/WRITE)
Do more parsing of the bufferpool config.
Start and stop streaming based on the bufferpool state.
Make separate methods for getting a buffer from the pool and filling it with
data. This allows us to fill buffers from other pools too. Either use copy or
read to fill up the target buffers.
Add property to force a transfer mode in v4l2src.
Increase default number of buffers to 4.
Negotiate bufferpool and its properties in v4l2src.
Pass the caps and the default video size to the bufferpool config.
Don't activate the bufferpool, this will be done by the object that decides to
use the bufferpool.
Improve debugging and error reporting.
Extend from GstBufferPool.
Handle the lifetime of the pool buffers correctly with the start/stop vmethods.
Map acquire and release directly to QBUF and DQBUF. We still expose an explicit
qbuf for the v4l2sink for now.
Move the details of how to capture to the device object. Remove the
v4l2src_calls.[ch] files because they are empty now.
Provide two simple methods to get and return a buffer to the device.
Also do a slow copy when the buffer is not from our pool.
Rename start and stop methods to open and close because that is what they do.
After setting the format on the device object, setup the bufferpools. Move this
code from the v4l2src_calls.c file, it is shared between source and sink.
Make new device start and stop method that merges various bits of common code
spread over several files.
We want to keep the default strides in the videoinfo. Keep the stride of the
video frames separate so that we can use both to copy a video frame and do
correct stride conversion.
Use GstVideoInfo to store the parsed caps.
Remove outsize from the caps parsing code, it's wrong because it does not use
the stride given by the driver.
Move the configuration of the framerate to where we set the other format
parameters.
Remove hack to check if the device is active.
Store streamparm in the device info.
Use some macros to access the current device configuration.
Remove some duplicate fields in src and sink and use the device configuration
instead.
Pass the caps to the set_format function and make _set_format parse the caps.
Also keep the parsed values in the v4l2object so that we can refer to them when
we want.
Keep track of the currently configured format and setting in the
v4l2object.
Pass the v4l2object to the bufferpool constructor so that the bufferpool can
know everything about the currently configured settings. This also allows us
to remove some awkward code.
Based on a patch by Guennadi Liakhovetski.
v2: updates because I forgot to add GstTuner interface to v4l2sink
v3: update to add all possible values to norm enum
Commit 6c8268dbfd broke recording
from interlaced v4l2 source (e.g. typical tv capture card) since
V4L2_FIELD_SEQ_TB (with fields stored separately) does not map
to currently defined interlaced format (fields stored interleaved).
Besides this mismatch, hardware might quite likely not support or
appreciate this field value, since querying supported formats mapped
_INTERLACED field formats to interlaced=true caps (so the latter should
not be mapped to field value that is not known to be supported).
Older kernels don't have these, and there's no easy way to check for the
existance of enums that doesn't involve a configure check, so just define
these if the V4L2_CAP_VIDEO_OUTPUT_OVERLAY define is not there, which was
added in the same commit as the TB/BT enum. Fixes compilation on CentOS 5.
https://bugzilla.gnome.org/show_bug.cgi?id=639339
This reverts commit 9e1d419d07.
Reverting this since it adds unreviewed and bad API to v4l2src
(property of type enum, with seemingly random and unsorted values).
with i686-apple-darwin10-gcc-4.2.1:
gstv4l2object.c: In function 'gst_v4l2_object_get_nearest_size':
gstv4l2object.c:1988: warning: format '%u' expects type 'unsigned int', but argument 12 has type 'gint *'
gstv4l2object.c:1988: warning: format '%u' expects type 'unsigned int', but argument 13 has type 'gint *'
MPEG doesn't have a static size per frame, so don't pretend it has one
and fail when capturing because it doesn't match. Instead mark the size
as unknown and let the read frame grabbing method use a reasonable fallback
value (assuming that's only for actual streaming formats)
Fixes bug #628349.
The format list should be sorted from high ranks to low ranks. In the GSList
sorting function this means the compare needs to return a positive value if
format a has a lower rank than format b.
Among other things this fixes v4l2src to prefer non-emulated formats
to emulated formats when built against libv4l.
This allows set_caps to succeed if caps change in a way that
would not modify the format we're getting from the hardware.
Otherwise if not in NULL state, setting caps would fail
with EBUSY.
With this change, in some cases it's OK to go PLAYING->READY->PLAYING
rather than PLAYING->NULL->PLAYING to avoid a time-consuming close
and reopen of the device.
Fixes#621723
Clear format list and probed caps when going to NULL so if a new device
is set we'll probe the formats again instead of using previously
detected ones. Fixes bug #591747.
This also does the following changes:
(1) pull the bufferpool code out into gstv4l2bufferpool.c, and make a
bit more generic so it can be used both for v4l2src and v4l2sink
(2) move some of the device probing/configuration/caps stuff into
gstv4l2object.c so it does not have to be duplicated between
v4l2src and v4l2sink
Fixes bug #590280.
Use GstPoll to wait for the fd of the video device to become readable before
trying to capture a frame. This speeds up stopping v4l2src a lot as it no
longer has to wait for the next frame, especially when capturing with low
framerates or when the video device just never generates a frame (which seems a
common issue for uvcvideo devices)
Fixes bug #563574.
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2src.c:
* sys/v4l2/gstv4l2src.h:
* sys/v4l2/v4l2_calls.c:
* sys/v4l2/v4l2src_calls.c:
Fix memory leaks. Small code cleanups : No need for empty _init(). No
need to memset instance structures. Some more FIXME's.
Original commit message from CVS:
Patch by: Mike Ruprecht <cmaiku at gmail dot com>
* sys/v4l2/gstv4l2object.c: (gst_v4l2_class_probe_devices):
Reprobe devices again instead of taking a cached list as new
devices could've been plugged in. Fixes bug #549062.
Original commit message from CVS:
2007-05-30 Andy Wingo <wingo@pobox.com>
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2object.c (gst_v4l2_object_new): Revert some
unintended changes.
Original commit message from CVS:
2007-05-30 Andy Wingo <wingo@pobox.com>
* sys/v4l2/v4l2src_calls.h:
* sys/v4l2/v4l2src_calls.c (gst_v4l2src_fill_format_list): Store
the format list in the order that the driver gives it to us.
(gst_v4l2src_probe_caps_for_format_and_size)
(gst_v4l2src_probe_caps_for_format): New functions, fill GstCaps
based on the capabilities of the device.
(gst_v4l2src_grab_frame): Update for object variable renaming.
(gst_v4l2src_set_capture): Update to be strict in its parameters,
as in the set_caps below.
(gst_v4l2src_capture_init): Update for object variable renaming,
and reflow.
(gst_v4l2src_capture_start, gst_v4l2src_capture_stop)
(gst_v4l2src_capture_deinit): Update for object variable renaming.
(gst_v4l2src_update_fps, gst_v4l2src_set_fps)
(gst_v4l2src_get_fps): Remove; these functions don't have much
meaning outside of an atomic set_caps method.
(gst_v4l2src_buffer_new): Don't set buffer duration, it is not
known.
* sys/v4l2/gstv4l2tuner.c (gst_v4l2_tuner_set_channel): Remove
call to update_fps; not sure about this change.
(gst_v4l2_tuner_set_norm): Work around the fact that for the
moment we don't have an update_fps_func.
* sys/v4l2/gstv4l2src.h (struct _GstV4l2Src): Don't put v4l2
structures in the object, just store what we need. Do store the
probed caps of the device. Don't store the current frame rate.
* sys/v4l2/gstv4l2src.c (gst_v4l2src_init): Remove the
update_fps_function, for now. Update for new object variable
naming.
(gst_v4l2src_set_property, gst_v4l2src_get_property): Update for
new object variable naming.
(gst_v4l2src_v4l2fourcc_to_structure): Rename from ..._to_caps.
(gst_v4l2_structure_to_v4l2fourcc): Rename from ...caps_to_....
(gst_v4l2src_get_caps): Rework to probe the device for supported
frame sizes and frame rates.
(gst_v4l2src_set_caps): Rework to be strict in the given
parameters: if someone asks us to have a certain size and rate,
that is what we configure.
(gst_v4l2src_get_read): Update for object variable naming. Don't
leak buffers on short reads.
(gst_v4l2src_get_mmap): Update for object variable naming, and add
comments.
(gst_v4l2src_create): Update for object variable naming.
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
(gst_v4l2_object_install_properties_helper),
(gst_v4l2_object_set_property_helper),
(gst_v4l2_object_get_property_helper), (gst_v4l2_set_defaults):
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_class_init),
(gst_v4l2src_init), (gst_v4l2src_set_property),
(gst_v4l2src_get_property), (gst_v4l2src_set_caps):
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_fill_format_list),
(gst_v4l2src_grab_frame), (gst_v4l2src_set_capture),
(gst_v4l2src_capture_init), (gst_v4l2src_capture_start),
(gst_v4l2src_capture_deinit):
Fix EIO handing when capturing. Add new property to specify the number of
buffers to enque (and remove the borked num-buffers usage).
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
(gst_v4l2_object_install_properties_helper):
comment out the properties that are already part of the tuner
interface.
Original commit message from CVS:
Patch by: Martin Szulecki
* sys/v4l2/gstv4l2object.c: (gst_v4l2_object_get_property_helper):
If "device-name" is requested and the device is not
open, try to temporarily open it to obtain this
information (#342494).
