Makes "start-bitrate" work without setting "connection-speed" property. Having
another property set as a requirement for this one to work is unexpected.
This commit allows to request some initial bitrate for first segment, then
go into adaptive streaming for the rest of media playback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3895>
When constructing an output profile using --profile-from, it is useful
to be able to override the top level container profile.
Expose a --container-profile option that applies as an override after
other methods for constructing an output profile have run. If no other
method was used, this will result in an empty top level container.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3977>
Instead of creating new decoder instance per new sequence,
re-use configured decoder instance via cuvidReconfigureDecoder()
API. It will make output surface reusable without re-allocation.
Also, in order for application to be able to reserve higher resolution
output surface, "init-max-width" and "init-max-height" properties are
added to each decoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3884>
Call input resource map functions (i.e., nvEncRegisterResource,
nvEncUnregisterResource, nvEncMapInputResource, and
nvEncUnmapInputResource) only once and reuse the mapped resources,
instead of per input frame map/unmap
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3884>
Wrap mapped decoder output surface using GstCudaMemory and
output without any copy operation. Also, for application to be able to
control the number of zero-copyable output surfaces,
"num-output-surfaces" property is added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3884>
A data offset with an offset smaller than the moof length is wrong
in smooth streaming streams. The samples will not be located and
eventually playback will error out. So compensate assuming data
is in mdat following moof.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3840>
A data offset with an offset smaller than the moof length is wrong
in smooth streaming streams.
The samples will not be located and eventually playback will
error out. So compensate assuming data is in mdat following moof.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3840>
When uridecodebin exposes pads for its streams, we immediately ghost
the relevant (selected) one and let composition send a seek as soon as a
buffer is probed.
This means that sometimes uridecodebin is still linking elements
internally (for non-selected streams) and sees flush events travel down
the elements it is still busy trying to link / forward sticky events to.
This causes all sorts of nasty issues, which can be avoided by simply
blocking all data flow from the source until no-more-pads has been
emitted by uridecodebin (or whatever sub_element is wrapped).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3971>
This most likely never caused any issues as we don't connect to
no-more-pads in the first place, and the element isn't directly exposed
to the user, but emitting it makes no sense, and we are actually going
to connect to no-more-pads in a subsequent commit.
The call was added in 86b893e54c, a patch
by me in 2013, I have no idea why but I probably didn't have a firm
grasp on what I was doing then.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3971>
this is an issue seen with musl based linux distros e.g. alpine [1]
musl is not going to change this since it breaks ABI/API interfaces
Newer compilers are stringent ( e.g. clang16 ) which can now detect
signature mismatches in function pointers too, existing code warned but
did not error with older clang
Fixes
gstv4l2object.c:544:23: error: incompatible function pointer types assigning to 'gint (*)(gint, ioctl_req_t, ...)' (aka 'int (*)(int, unsigned long, ...)') from 'int (int, int, ...)' [-Wincompatible-function-pointer-types]
v4l2object->ioctl = ioctl;
^ ~~~~~
[1] https://gitlab.alpinelinux.org/alpine/aports/-/issues/7580
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3950>
This fixes a compile error with recent upstream FFmpeg.
The AV_CODEC_CAP_AUTO_THREADS was deprecated and renamed to
AV_CODEC_CAP_OTHER_THREADS in FFmpeg upstream commit
7d09579190de (lavc 58.132.100).
The AV_CODEC_CAP_AUTO_THREADS was finally removed in FFmpeg upstream
commit 10c9a0874cb3 (lavc 59.63.100).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3951>
The encoder does not support reconfiguration, and only deinitializing it
and then initializing it again causes deadlocks.
Also only reconfigure and drain the encoder if the video info has
actually changed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3957>
Fixes#1358.
Passing ARGB64/RGBA64 to vtenc caused the encoding to fail
when running on M1 Pro/Max variants with macOS 12.x, so let's
remove these formats from caps when such scenario is detected.
This issue appears to have been fixed OS-side in macOS 13.0.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3912>
This crept in several years ago sadly :(
The usage of accurate seeking should be reserved to use-cases where it is
essential that we seek to that position. This should not be the default.
There is a new option `--acurate-seeks/-a` to be able to force that.
Furthermore, if accurate seeks aren't required, a player should be using the
GST_SEEK_FLAG_KEY_UNIT flag to seek to the closest keyframe and provide the most
reactive experience.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3926>
This was causing incorrect output when seeking, especially
when used with a multithreaded source like `videotestsrc n-threads=2`.
It should now correctly wait for frames still being processed by VT
while vtdec is flushing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3922>
We are using std::isspace() with one parameter. That function is defined
in the cctype header.
```
win32ipcutils.cpp(34): error C2672: 'std::isspace': no matching overloaded function found
win32ipcutils.cpp(34): error C2780: 'bool std::isspace(_Elem,const std::locale &)': expects 2 arguments - 1 provided
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3933>
When the task already exists, we forgot to free the passed `user_data`.
This wasn't an issue for most C code, which doesn't pass a
`GDestroyNotify`, but bindings such as gstreamer-rs do!
That said, allocating a trampoline in gstreamer-rs just for it to get
thrown away again is awkward. Maybe we need a `gst_pad_resume_task`?
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3920>
The av1C box is optional so dropping parsing does not break anything
fundamentally, and there seems to be no historical record how version 0
even looks like while the comments and the parsing disagreed with each
other.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3882>
Since b76d336549
pads are deactivated when going to READY but in `uridecodebin(3)`, the
sources source pads are activated while in NULL state (when PULL mode is
supported), meaning that we are ending up deactivating those pads in
NULL_TO_READY, breaking the pipeline.
The intent of the commit mentioned above is to ensure that the pads are
deactivated either in PAUSED_TO_READY or READY_TO_READY, so it should
be safe to avoid deactivating in NULL_TO_READY.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3849>
Generating the source element is done when uridecodebin is doing the
READY to PAUSED state change, so it is reasonable to set the new source
element to that state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3857>
Do not store cached EGL images in GstMemory QData. Instead, use a
per-DmabufUpload GHashTable to store cache entries with a weak
reference to the GstMemory.
This allows two glupload elements on separate tee branches to have
their own EGL image cache. For this pipeline:
gst-launch-1.0 v4l2src ! tee name=t \
t. ! queue ! glupload ! fakesink
t. ! queue ! glupload ! fakesink
this gets rid of the occasional critical error message:
GStreamer-CRITICAL **: 08:26:33.194: gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3880>
