Otherwise there is a mismatch between the QoS values and what upstream
would expect, leading to too much buffer dropping in video decoders in
case rate < 1.0 or not enough buffer dropping in case rate > 1.0
Adding validate tests with and without decoders.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/679>
We need to take into account the base_ts to compute next_ts and it needs
to be updated on rate change.
This introduces `pending_rate` so that change rate is properly handled
in the streaming thread in a safe way.
Added tests
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/679>
Stop comparing all timestamps from buffers that are before the segment
with the segment.stop and compare with the actual end times.
Comparing to segment.stop for all the buffers that where before
the segment.stop was incorrect and leading to consuming wrong buffers
and not respecting segment.stop, this is now properly tested.
Expectations for `reverse.10_to_1fps.validatetest` have been fixed to
take that into account and comparing the checksums of the sinkpad and
srcpad expectations makes pretty clear how wrong that was.
(we can see in the expectations that videotestsrc outputs an extra
buffer with pts == segment.stop and this one is now properly dropped
by videorate as bec7f4ad5e aimed at
doing)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/668>
In reverse playback we were not taking into account the current buffer
samples to check if we had reached EOS which was leading to a buffer
with PTS = CLOCK_TIME_NONE containing too many frames followed by a
useless buffer with pts=0 duration=0, and a g_critical issue in
gst_object_sync_values.
Also add a validate based test case.
Without that patch this is how the expectation fails:
``` diff
--- log-asink-sink-expected 2020-05-22 23:22:42.654384579 -0400
+++ log-asink-sink-actual 2020-05-22 23:29:35.671586380 -0400
@@ -27,5 +27,6 @@
buffer: pts=0:00:00.058820861, due=0:00:00.023219955, flags=discont
buffer: pts=0:00:00.035600907, due=0:00:00.023219954, flags=discont
buffer: pts=0:00:00.012380952, due=0:00:00.023219955, flags=discont
-buffer: pts=0:00:00.000000000, due=0:00:00.012380952, flags=discont
+buffer: due=0:00:00.012380953, flags=discont
+buffer: pts=0:00:00.000000000, flags=discont
event eos: (no structure)
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/667>
If core is built as a subproject (e.g. as in gst-build), make sure to use
the gst-plugin-scanner from the built subproject. Without this, gstreamer
might accidentally use the gst-plugin-scanner from the install prefix if
that exists, which in turn might drag in gst library versions we didn't
mean to drag in. Those gst library versions might then be older than
what our current build needs, and might cause our newly-built plugins
to get blacklisted in the test registry because they rely on a symbol
that the wrongly-pulled in gst lib doesn't have.
This should fix running of unit tests in gst-build when invoking
meson test or ninja test from outside the devenv for the case where
there is an older or different-version gst-plugin-scanner installed
in the install prefix.
In case no gst-plugin-scanner is installed in the install prefix, this
will fix "GStreamer-WARNING: External plugin loader failed. This most
likely means that the plugin loader helper binary was not found or
could not be run. You might need to set the GST_PLUGIN_SCANNER
environment variable if your setup is unusual." warnings when running
the unit tests.
In the case where we find GStreamer core via pkg-config we use
a newly-added pkg-config var "pluginscannerdir" to get the right
directory. This has the benefit of working transparently for both
installed and uninstalled pkg-config files/setups.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/582>
-base plugins will always be found in the build directory, and
core plugins will be found either also via the build directory
(if both core and -base are a subproject) or by getting the
pluginsdir via pkg-config if core is installed.
The GST_PLUGIN_LOADING_WHITELIST env var will make sure we only
pick up plugins from core/base and base plugins only from the
builddir.
There is no reason to look for -base plugins in the install dir.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/582>
If there are two elements and threads attempting to query each other for
an OpenGL context. The locking may result in a deadlock.
We need to unlock each element's context_lock when querying another
element for the OpenGL context in order to allow any other element to
take the lock when the other element is querying for an OpenGL context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/642>
This commit modifies GstVideoMasteringDisplayInfo and GstVideoContentLightLevel
structs so that each value is to be more like hdr_metadata_infoframe struct
of linux drm header and DXGI_HDR_METADATA_HDR10 struct of Windows.
So each value is no more fraction but normalized one as per CTA 861.G spec.
Also the unit of each value will be consistent with H.264, H.265
specifications, hdr_metadata_infoframe struct for linux and
DXGI_HDR_METADATA_HDR10 struct for Windows.
The wordlen ("length") MUST represent the total "number of 32-bit words
in the extension, excluding the four-octet extension header" (rfc3550).
There are cases where already existent padding is reused for adding
the new extension. So the new wordlen should be updated if the new
added extension makes it to increase.
This patch introduces a new API to send and parse mouse scroll events. Mouse
event coordinates are sent relative to the display space of the related output
area. This is usually the size in pixels of the window associated with the
element implementing the GstNavigation interface.
The GST_VIDEO_BUFFER_FLAG_TOP_FIELD flag is a superset of
GST_VIDEO_BUFFER_FLAG_BOTTOM_FIELD as they are defined using other
flags. As a result we can't use GST_BUFFER_FLAG_IS_SET() to check for
those flags.
By setting the extension-ID for TWCC (Transport Wide Congestion Control),
the payloader will embed sequencenumbers as a RTP header-extension
according to https://tools.ietf.org/html/draft-holmer-rmcat-transport-wide-cc-extensions-01#section-2
The negotiation of this being enabled with downstream elements
is done with caps reflecting the way this is communicated using SDP.
With commit "basepayload: Expose onvif-no-rate-control property" the rtp
timestamp changed behaviour when rate control is disabled.
When disabling rate control, we must take care of the stream time to
avoid the timestamps to begin from zero again.
This simply implies not trying to "prepare" those buffers,
as mapping an empty buffer to a video frame does not make
much sense.
This also adds a simple test in compositor that performs
some trivial checking of the handling of gap events, the test
was not failing before, but an error was logged, this is
no longer the case.
Fixes#717
This validate that the base class properly save and return the flow
return value received when gst_rtp_base_depay_push/push_list() helper is
being used.
This is not set anywhere, and it's pretty clear the pipeline in
question has not been tested in a long time. Disable test with
a FIXME, test needs to be rewritten to not use real output devices.
overlaycomposition.c:276:5: warning: implicit declaration of function 'exit' [-Wimplicit-function-declaration]
overlaycomposition.c(263): warning C4090: 'initializing': different 'const' qualifiers
