mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-11-24 02:31:03 +00:00
Code Issues 1 Projects Releases Wiki Activity
16926 commits 44 branches 1509 tags 386 MiB
Commit graph

354 commits

Author SHA1 Message Date
Edward Hervey
097f09b823 mpegtsbase/tsdemux: Refactor seek and segment handling 
All calculations go through the mpegtspacketizer
Remove unused variables/code
 2012-03-01 18:15:51 +01:00
Edward Hervey
77ece06a3f mpegtsbase: Error out on EOS without any pad 
Avoids ending up with hanging pipelines
 2012-03-01 18:15:51 +01:00
Edward Hervey
a4899af8d6 mpegtspacketizer: Offset calculation 
Allows PCR<=>PTS<=>offset estimation/calculation
Right now the calculation is very naive, but can be extended later on
without disrupting the code in tsdemux/mpegtsbase
 2012-03-01 18:15:51 +01:00
Edward Hervey
39cc29a7d2 mpegtspacketizer: clock fix and minor addition 
* Don't take into account packets that arrived at the same time as
  previous ones for clock skew estimation
* Add convenience method for processing the next ts packet
 2012-03-01 18:15:51 +01:00
Edward Hervey
c10fc17a1e Revert "mpegtsdemux: Not apply various time the same PMT to a program when repetead" 
This reverts commit 8cb0e87f56.

mpegtspacketizer already checks if it's a new PMT or not
 2012-03-01 18:15:51 +01:00
Edward Hervey
d920d9d64f tsdemux: Remove all seeking code 
It was more than bogus
 2012-03-01 18:15:51 +01:00
Thibault Saunier
5c2e6dc512 mpegtspacketizer: catch section lengths extending past the buffer length 
This is probably the cause for an occasional crash while streaming
MPEG. Blind fix after staring at the code and following logic, so
may or may not fix the issue, I cannot test.

(Port of 4275a70cb5 from mpegdemux)
 2012-02-27 09:57:45 -03:00
Thibault Saunier
58a210e3d3 mpegtspacketizer: support more character set encodings 
Support UTF-16BE, EUC-KR (KSX1001), GB2312 and ISO-10646/UTF8 text
encoding and fixed new line for multibyte encoding
    
https://bugzilla.gnome.org/show_bug.cgi?id=664257

(Port of 9759d66407 from the mpegtsdemux
element)
 2012-02-27 09:42:27 -03:00
Thibault Saunier
336710d355 tsbase: Fix parsing of PSI table IDs 
(Ported from mpegtsdemux d8fd874f52)
 2012-02-24 19:08:40 -03:00
Thibault Saunier
f977d7e743 tsdemux: Avoid unlinkely leaks and segfault 2012-02-24 15:28:35 -03:00
Edward Hervey
b6d98aea5f tsdemux: Use new clock skew estimation for outgoing timestamps 
Only used in live mode
 2012-02-24 17:53:52 +01:00
Edward Hervey
e6ff2f7b83 tsdemux: Various code cleanup and dead code removal 2012-02-24 17:52:33 +01:00
Edward Hervey
4bc7cd04c1 mpegtspacketizer: Fix issues with skew code 
* Always try to get a timestamp for the algorithm
* Remove dead variable
* Return proper default value
 2012-02-24 17:47:38 +01:00
Thibault Saunier
6a8d2c45f6 mpegtspacketizer: Estimate clock skew and retimestamps buffers more precisly 
Apply the EPTLA algotithm to estimate clock skew.
Reusing code from  -good/gst/rtpmanager/rtpjitterbuffer.c
 2012-02-24 10:57:09 +01:00
Thibault Saunier
48a699812b tsdemux: Clean up AAC caps mess 2012-02-24 10:57:05 +01:00
Thibault Saunier
dc8b6c678d tsdemux: Reindent gstmpegdesc.h 2012-02-24 10:57:02 +01:00
Thibault Saunier
67fd590e9a tsdemux: Support more DTS/AC3 descriptors 2012-02-24 10:56:58 +01:00
Edward Hervey
6ef0ae4ffe tsdemux: Remove useless finalize() 2012-02-24 10:56:14 +01:00
Edward Hervey
8b73baeced tsdemux: Use incoming timestamps in live mode 2012-02-23 16:39:48 +01:00
Edward Hervey
8f433e1677 tsdemux: Report latency (700ms) 2012-02-23 16:39:48 +01:00
Edward Hervey
c492b00b69 mpegtsbase: Query whether upstream is live or not 2012-02-23 16:39:48 +01:00
Thibault Saunier
8cb0e87f56 mpegtsdemux: Not apply various time the same PMT to a program when repetead 
Sometimes their are several times the same PMT applying to a same program in a stream,
tsdemux was totally baffled when this was happening, we now keep the one we
already applied so it works properly.
 2012-02-17 12:19:20 -03:00
Thibault Saunier
adc947e127 tsdemux: fix glib deprecation 2012-02-17 12:19:20 -03:00
Thibault Saunier
1182dd0c1b tsdemux: Avoid throwing FLOW_ERROR on last PCR processing error 
In the case of scanning last pcr, errors are not critical, so we keep
the stream flowing.
 2012-02-15 15:48:44 -03:00
Thibault Saunier
cda0d3aed8 tsdemux: Add AAC latm support 2012-02-15 15:48:44 -03:00
Thibault Saunier
6094ec27b1 tsdemux: Minor refactoring/code cleaning 
... add some debugging symbols in the mean time.
 2012-02-15 15:48:44 -03:00
Vincent Penquerc'h
2dec0950cf tsdemux: add explicit supported AAC stream-format in template caps 
https://bugzilla.gnome.org/show_bug.cgi?id=665394
 2012-02-02 12:37:02 +00:00
Vincent Penquerc'h
8147669971 plenty: fixup glib deprecations 2012-01-27 15:47:07 +00:00
Mark Nauwelaerts
d8fdd3485b mpegtsdemux: break out when stream identified 2012-01-23 14:22:18 +01:00
Mark Nauwelaerts
b00ed32c5a mpegtsdemux: avoid NULL manipulation if invalid input 2012-01-23 14:22:18 +01:00
Edward Hervey
fcf511aa8f tsdemux: Don't provide bogus values in non-TIME push-mode 
Only take the upstream segment values in GST_FORMAT_TIME
 2012-01-10 11:45:25 +01:00
Edward Hervey
24408bce96 tsdemux: Handle rollover in PTS and DTS 
Also hands back-rollover which can happen with PTS
 2012-01-10 11:45:22 +01:00
Vincent Penquerc'h
7521b597f4 various: fix pad template ref leaks 
https://bugzilla.gnome.org/show_bug.cgi?id=662664
 2011-11-28 13:08:27 +00:00
Edward Hervey
e500ec524c tsdemux: Add notes on synchronization and scheduling 2011-11-16 12:47:58 +01:00
Youness Alaoui
894ac8f493 hlsdemux/tsdemux: Add HP copyright on work done on HLS 2011-09-09 12:12:12 +02:00
Youness Alaoui
59c61209cf tsdemux: Need to flush all streams when we receive a flush-start 2011-08-30 16:17:47 +02:00
Youness Alaoui
e380fbb019 tsdemux: In push mode, do not start pull loop if upstream seek fails 2011-08-26 09:51:46 +02:00
Sebastian Dröge
c86aba3469 tsdemux: Use FALSE instead of 0 for bool parameter 2011-08-24 09:35:18 +02:00
Youness Alaoui
744101a417 tsdemux: Need to send a newsegment after a seek 2011-08-24 08:12:29 +02:00
Youness Alaoui
cfd28a6f90 tsdemux: Forward seek/duration query/event to the sinkpad 2011-08-24 07:48:52 +02:00
Vincent Penquerc'h
66dbdfd4d1 tsdemux: do not try to compare a PCR with itself for statistics 
Especially as one of the logs will cause a divide by zero.

https://bugzilla.gnome.org/show_bug.cgi?id=656927
 2011-08-23 10:38:10 +02:00
Vincent Penquerc'h
b19a5ea1f3 tsdemux: do not keep a dangling pointer 
When removing the current program, it will get freed by the
hash table removal callback, so ensure we clear our pointer
to it.

Fixes a crash later on in gst_ts_demux_push trying to access it.

https://bugzilla.gnome.org/show_bug.cgi?id=656927
 2011-08-23 10:37:24 +02:00
Sebastian Dröge
6edff48378 mpegtsbase: First try if upstream handles seeking in TIME format before seeking in the demuxer 2011-08-23 09:52:20 +02:00
Sebastian Dröge
a27b7b6712 tsdemux: First send SEEKING queries upstream 2011-08-23 09:40:16 +02:00
Sebastian Dröge
ca0df16d52 tsdemux: Send DURATION query upstream first 2011-08-23 09:27:23 +02:00
Youness Alaoui
818762e8fc tsdemux: do not send a new-segment on stream removal 
When a program is changed, stream_added is called which sets the
need_newsegment to TRUE, then stream_removed is called, which calls
the flush_pending_data, which checks for the newsegment and causes
it to send a new-segment.

We must not send the newsegment when flushing the pending data on the
removed stream. We should only push it when flushing data on the newly
added streams (after they finish parsing their PTS header)
 2011-08-22 16:01:24 +02:00
Youness Alaoui
382710e200 tsdemux: Fix newsegment when switching programs 
If a program/stream is changed, then a newsegment is sent which must
not be the same as the base segment since it happens later. We must
shift the start position by the time elapsed since the newsegment
and the current PTS of the stream
 2011-08-22 16:01:17 +02:00
Youness Alaoui
4cc1dfb360 tsdemux: interpolate gap and fix timestamps depending on upstream segment 2011-08-22 15:55:47 +02:00
Youness Alaoui
02bc614163 tsbase: reinitiate segment at flush-stop event only 2011-08-18 14:54:22 +02:00
Edward Hervey
5c77682dab tsdemux: Take into account upstream newsegment events 
If the incoming newsegment event was in time, use that position value
for the downstream newsegments.
 2011-08-01 18:49:55 +02:00
Edward Hervey
adfb090b59 mpegtsbase: Remove programs on EOS 
Allows subclasses to properly flush out pending data.
 2011-08-01 15:46:12 +02:00
Edward Hervey
57279cdd24 tsdemux: Refactor stream/program removal 
The program_stopped vmethod was called before stream_removed vmethod
was being called. Since we only did stream-related operations in there,
we just remove the program_stopped vmethod and do everything in the
stream_removed one.

Also, make sure we flush out all pending data before sending EOS.
 2011-08-01 10:54:16 +02:00
Nicolas Dufresne
cbc0a2f056 mpegtsbase: Prevent stack gardening by using the right type 
stream_type is stored as guint inside the GstStructure but was retreived
using valist with a pointer to guint16. This would cause stack gardening
when code is compiled without optimisation (e.g. in -O0 the compiler wont
pad the stack to optimise out required mask).

https://bugzilla.gnome.org/show_bug.cgi?id=655540
 2011-08-01 09:33:25 +02:00
Edward Hervey
634d29cd88 mpegtsbase/tsdemux: Fix stream/pad activation order 
We first activate new streams before shutting down old ones.
We emit no-more-pads after we add new streams and emit EOS before
removing old ones.
Also cleanup/refactor a bit more of the code accordingly
 2011-07-25 18:56:49 +02:00
Edward Hervey
d0e8427b4e pesparse: Fix stuffing byte handling 
We in fact get the size of the header (including stuffing bytes), therefore
use that instead of trying to skip 0xff bytes ourselves since some media
streams do start with 0xff (like mpeg audio's initial 0xfff).
 2011-07-20 19:19:13 +02:00
Alessandro Decina
2b7e9abc59 mpegtsdemux: fix compiler warnings 2011-07-20 08:59:25 +02:00
Edward Hervey
a960e72efa mpegtsbase/tsdemux: Add more comments and removal unused variable 2011-07-19 09:49:40 +02:00
Edward Hervey
2b127601e9 mpegtsbase: Avoid double removal of streams 
This can happen if the PCR pid is the same as a audio/video PID.
 2011-07-19 09:49:40 +02:00
Edward Hervey
b170b2020c mpegtsbase: Add a GList of streams to the program 
Allows faster iteration of all program streams.

We still keep the Array to allow fast retrieval of stream by PID.
 2011-07-19 09:49:40 +02:00
Edward Hervey
dc18e2b16d mpegtsbase: Use a bit array instead of an array of gboolean 
Makes know_psi and is_pes 32 times smaller
 2011-07-19 09:49:39 +02:00
Edward Hervey
177e00f809 tsdemux: Use standalone PES parser 2011-07-18 09:13:15 +02:00
Edward Hervey
6f9a6cc2ba mpegtsdemux: Add standalone PES parser 2011-07-18 09:13:14 +02:00
Edward Hervey
42cf7d016c mpegdefs: clarify some stream ids 2011-07-17 09:49:06 +02:00
Edward Hervey
f6f885ddb8 tsdemux: whoops, tsdemux isn't ready yet for primary rank :) 2011-07-16 13:51:44 +02:00
Edward Hervey
a00900367a mpegtsbase/tsdemux: Cleanups and comments 2011-07-16 13:47:45 +02:00
Edward Hervey
9f1511e998 tsdemux: Fix newsegment creation for push mode 
And all relevent comments to what it should be doing, refactor everything
a bit. Still not perfect ... but better.

Fixes #654657
 2011-07-16 13:44:00 +02:00
Edward Hervey
b73679e13d mpegtsbase: Store incoming newsegments 2011-07-16 12:27:50 +02:00
Alessandro Decina
d439f2d38d mpegtsbase: actually set seen_pat=TRUE when we see a PAT 2011-07-15 00:03:52 +02:00
Edward Hervey
a82483e367 mpegtsbase: Split up whether we saw a PAT and its offset 
Fixes the issue with streams that don't set an offset on their buffers,
like those coming from hlsdemux.

Fixes #653481
 2011-07-14 22:10:27 +02:00
Olivier Crête
ca7a512739 mpegtsdemux: Restore erroneously removed data++ 
Also, put back some unused code in comment and replace // comments by /* */
 2011-07-13 13:39:54 -04:00
Olivier Crête
d7a774cc44 mpegdemux: Fix unused-but-set warnings 2011-07-12 17:53:33 -04:00
Thiago Santos
ca8ea19cc3 tsdemux: only free the index array if it exists 
Only free the array if it exists.

Contains an unrelated indentation fix, courtesy of gst-indent
 2011-06-17 16:18:03 -03:00
Edward Hervey
b3ef72f2eb tsdemux: Don't free unexistent PAT 
And cleanup find_timestamps a bit
 2011-06-12 11:27:30 +02:00
Edward Hervey
e1a7d71184 tsdemux: More fixes to handle non-188 byte packets 2011-06-07 20:50:35 +02:00
Edward Hervey
6c0254b84b mpegts: Stop scanning for keyframes as early as possible 2011-06-07 20:50:35 +02:00
Janne Grunau
ae2e7624d6 mpegtsdemux: always try to seek for to a keyframe 
keyframe is expected to lie in the the next ~2500 ms
 2011-06-07 20:50:35 +02:00
Janne Grunau
9352cfc478 mpegtsdemux: fix timestamps in newsegement event after seeking 2011-06-07 20:50:34 +02:00
Janne Grunau
cde65d6d6e mpegtsdemux: payload parsing for H.264 2011-06-07 20:50:34 +02:00
Janne Grunau
ff15d6fa80 mpegtsdemux: implement key_unit seeking for MPEG2 video 2011-06-07 20:50:34 +02:00
Janne Grunau
3ce1ec7c9c mpegtsdemux: accurate seeking 
* pes header parsing for pts is ugly, refactor
 * timestamps/newsegment after seeking is still off
 2011-06-07 20:50:34 +02:00
Janne Grunau
15391b29e1 mpegtsdemux: push based seeking based on PCR 
buffer timestamps are converted to GstClockTime to cover pcr/pts wraps.
multiple pcr/pts wraps are handled with an index which ensures at most
a single pcr wraparound between two entries.
the last seen pcr is recorded to have a nearby index point for short seeks
resuming playback might be delayed if the postion is not a keyframe

TODO: replace manual packet scanning and parsing in the initial duration estimation
 2011-06-07 20:50:34 +02:00
Janne Grunau
f89a0abca0 mpegtsdemux: create function for pcr parsing 2011-06-07 20:50:34 +02:00
Janne Grunau
37f1decf78 mpegtsdemux: adaptation field length == 0 is valid 
it can be used to insert a single stuffing byte
do not parse the following payload as adaptation field
 2011-06-07 20:50:34 +02:00
Edward Hervey
f4c96f1dbb tsdemux: Fix scanning on small files 
We were previously:
* Stopping early in the initial PCR scan
* Giving a negative offset for the second PCR scan
 2011-05-31 12:58:11 +02:00
Edward Hervey
e3839f0241 mpegtsbase: Don't call program_stopped with a NULL program 2011-05-31 12:58:11 +02:00
Edward Hervey
ffc9303c9d tsdemux: Protect against program being removed 2011-05-30 13:01:20 +02:00
Stefan Kost
79e3b5b4bb various: fix author tag in element details 2011-05-18 10:31:38 +03:00
Edward Hervey
21add205b7 tsdemux: Don't leak bufferlist on streams without pads 
https://bugzilla.gnome.org/show_bug.cgi?id=648929
 2011-04-29 12:47:34 +02:00
Edward Hervey
565f068049 mpegtsbase: Unref buffers we don't use. 
Avoids a massive leak :)

https://bugzilla.gnome.org/show_bug.cgi?id=648929
 2011-04-29 12:47:34 +02:00
Edward Hervey
c26ca36cf0 mpegtsbase: Don't forget to free the program streams array 
https://bugzilla.gnome.org/show_bug.cgi?id=648929
 2011-04-29 12:47:34 +02:00
Edward Hervey
390502a093 tsdemux: Free packet buffer even if it doesn't have a payload 
This can happen with AFC-only packets. Avoids leaking buffers.

https://bugzilla.gnome.org/show_bug.cgi?id=648929
 2011-04-29 12:47:34 +02:00
David Schleef
40f3b4a651 mpegtsdemux,tsdemux: Add byte-stream to h264 caps 
Fixes #606662.
 2011-04-24 19:40:08 -07:00
Tim-Philipp Müller
5d6bdf6052 Fix some unused-but-set-variable warnings with gcc 4.6 2011-04-15 00:24:47 +01:00
Thibault Saunier
17fd7ebcb4 android: make it ready for androgenizer 
Remove the android/ top dir
Fixe the Makefile.am to be androgenized

To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
 2011-04-11 07:27:11 +02:00
Janne Grunau
bc91adcf55 mpegtsdemux: fix stream_info descriptor parsing 2011-03-24 15:18:34 +01:00
Mart Raudsepp
b69450af92 mpegtspacketizer: Handle all ISO8859-x encodings in get_encoding() 
... according to ETSI EN 300 468, "Selection of character table"
 2011-03-21 19:57:39 +01:00
Janne Grunau
3ebc8a43e2 mpegtsdemux: do not try to parse packets containing section data as PES 2011-03-21 19:30:17 +01:00
Janne Grunau
bf046719a2 mpegtsdemux: add stream types for DSM CC A, B, C, D 2011-03-21 19:27:08 +01:00
Janne Grunau
74a8e966f5 mpegtsdemux: fix playback if PMT is seen before PAT 
The stream for the PMT pid has to be cleared since the version checking
in the packetizer won't emit the same PMT again otherwise.
 2011-03-21 19:24:08 +01:00
Tim-Philipp Müller
6e321d2d87 mpegtspacketizer: fix log message printf format 2011-02-18 15:17:17 +00:00
David Schleef
de968b6c7d mpegtsdemux: Fix disting of headers 2011-02-17 14:43:38 -08:00
Janne Grunau
92d5ea2926 mpegtsdemux: use G_GUINT64_FORMAT as format specifier for guint64 
fixes compilation on 32bit
 2011-02-17 12:51:07 -08:00
Janne Grunau
535bf57d1f mpegtsdemux: relicense gstmpegdefs.h, gstmpegdesc.h and gstmpegdesc.c to LGPL only 
with permission from the license header:
"""
This library is licensed under 2 different licenses and you
can choose to use it under the terms of either one of them. The
two licenses are the MPL 1.1 and the LGPL.
"""
 2011-02-17 17:57:17 +01:00
Janne Grunau
22ecf13e42 mpegtsdemux: add MPEG TS demuxer rewrite from Edward Hervey 
with contributions from Miquel Angel Farre Guiu and Zaheer Abbas Merali
 2011-02-17 17:56:59 +01:00