mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-11-28 12:41:05 +00:00
Code Issues 1 Projects Releases Wiki Activity
8115 commits 44 branches 1509 tags 436 MiB
Commit graph

3764 commits

Author SHA1 Message Date
Mark Nauwelaerts
1a60c7b040 avidemux: push mode; also report seekable without an element index 
... since recent code also seeks around to obtain required data
from avi index.
 2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
3a1a140e2d avidemux: add some check and standardized seek event handling in push mode 2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
d90aed1857 avidemux: fix offset handling in push mode seeking 
Push mode seeking uses same index data as pull mode, and stores
offset to data in chunk, whereas push mode operates in chunks,
and as such needs offset consistently corresponding to chunk headers.
Also fix determining best matching stream for incoming newsegment event,
as well as setting some stream state accordingly.
 2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
1dfcc3227c flvdemux: conduct index scan in task thread 
... rather than in seeking thread, which might then occupy mainloop
for some time with possible unresponsive side-effects.
 2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
f23fb39bc7 flvdemux: avoid indefinite index growth 
That is, check for and do not add an index entry that has already
been added.
 2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
f79de81bb4 flvdemux: also collect index info on-the-fly in pull mode 2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
86a1aec2c0 flvdemux: incrementally build index in pull mode 
Scan for needed part upon a seek as opposed to doing a complete scan
at startup, which may take some time depending on file and/or platform.
Also accept index metadata in pull mode and peek for some metadata
at the end of the file when deemed appropriate.
 2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
66fabd8bfd flvdemux: some more variable cleanup 2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
122daaf6af flvdemux: refactor adding index entry 2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
6aa4d5df2d flvdemux: fix setting DELTA_UNIT flag on outgoing buffers 
... which should not depend on having index available or not.
Also refactor resulting collapsed code.
 2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
561a506822 qtdemux: avoid erroneous codec-data overriding of stsd information 2010-03-10 11:48:06 +01:00
Wim Taymans
821096c4f1 rtspsrc: parse connection information 
Parse the connection information from the SDP and use it to figure out if we are
dealing with ipv4 or ipv6 connections.
 2010-03-10 11:28:22 +01:00
Wim Taymans
8eb5c2c794 rtspsrc: require a destination for multicast 
When setting up the multicast sockets, we need a destination address to listen
on or else we error.
 2010-03-10 11:21:20 +01:00
Wim Taymans
574447b092 rtspsrc: handle ipv6 listening ports when needed 
Add some code to make udpsrc listen on an ipv6 address when needed. The
detection of IPV6 is not yet implemented.
 2010-03-10 11:21:20 +01:00
Wim Taymans
455f53c896 udp: use uri parsing code 
Use the uri parsing helper functions to manage the host and port pairs. This
adds support for IPV6.
 2010-03-10 11:21:19 +01:00
Wim Taymans
14ae2080d2 udpnetutils: add helper functions for udp uri handling 
Add some helpers to parse udp uris. Make sure IPV6 is supported too.
 2010-03-10 11:21:19 +01:00
Olivier Crête
a6dfe96169 rtpsession: Make it possible to favor new sources in case of SSRC conflict 
Add a "favor-new" property that tells the session to favor new sources when
there is a SSRC conflict. This is useful for SIP calls and other such cases
where a remote loop is extremely unlikely.

Fixes #607615
 2010-03-10 11:21:19 +01:00
Olivier Crête
f336ea283f rtpsession: Move SSRC conflicts lists into RTPSource 
We will also need to track SSRC conflicts in remote sources.

See #607615
 2010-03-10 11:21:18 +01:00
Wim Taymans
38f2b4735d rtspsrc: send keep alive when paused 
When we are paused, send keep alive messages to the server so that our session
doesn't time out when we go back to playing later.
 2010-03-10 11:21:18 +01:00
David Schleef
acb6ebbc9a multifilesink: Add key-frame option to next-file 
This allows segmenting of MPEG-TS files at key frames, which is
exactly what is needed for Apple's HTTP streaming.
 2010-03-09 13:52:30 -08:00
Sebastian Dröge
42ff597f41 videobox: Fix autocropping for odd width/height differences 2010-03-09 21:03:18 +00:00
Sebastian Dröge
1819fcb4a5 videobox: Use libgstvideo for format specific stuff 2010-03-09 21:03:18 +00:00
Sebastian Dröge
79e720052a audiofx: Sync properties to the stream time 2010-03-09 21:03:18 +00:00
Sebastian Dröge
4381b9296f videobox: Make properties controllable 2010-03-09 21:03:18 +00:00
Sebastian Dröge
7dcb294b54 videobox: Some cleanup 2010-03-09 21:03:18 +00:00
Sebastian Dröge
f8b7308c21 effectv: Use controller where possible, optimize a bit and make properties threadsafe 2010-03-09 21:03:18 +00:00
Benjamin Otte
b5a3b9cb1c flx: fix description 
It's video, not audio
 2010-03-09 19:15:07 +01:00
Tim-Philipp Müller
8127670c86 Revert "Add 4:2:2, 4:1:1, and 4:4:4 output support" 
This reverts commit 637c26f61a.
 2010-03-09 00:09:34 +00:00
Wim Taymans
66709a7a68 rtspsrc: configure multicast correctly 
Take the transport destination for multicast.
Disable loop and autojoin for multicast on the udpsinks.
 2010-03-08 17:48:46 +01:00
Wim Taymans
83a0c73dc0 multicast: always configure loop and ttl 
Also configure TTL and loop parameters when we add a client after initializing
the sender.
 2010-03-08 17:48:37 +01:00
Wim Taymans
cabe01ef95 Revert "rtph263depay: baseclass handles timestamps for us" 
This reverts commit 564581e1b8.

If we don't call push_ts, there will be no timestamp at all on the outgoing
buffer.

Fixes #612154
 2010-03-08 17:48:27 +01:00
Benjamin M. Schwartz
637c26f61a Add 4:2:2, 4:1:1, and 4:4:4 output support 2010-03-08 17:48:11 +01:00
Wim Taymans
529f443a61 rtpsource: use payload size to estimate bitrate 
Use the length of the payload for estimating the receiver bitrate so that it
matches the calculations done on the sender side. Together with the number of
packets one can scale the bitrate with the header overhead of the lower
transport.
 2010-03-08 17:48:04 +01:00
Wim Taymans
c971d1a9ab rtpsource: refactor bitrate estimation 
Don't reuse the same variable we need for stats for the bitrate estimation
because we're updating it.
Refactor the bitrate estimation code so that both sender and receivers use the
same code path.
 2010-03-08 17:48:00 +01:00
Tristan Matthews
a0a6d4ff3b added bitrate estimation to receiver-side stats, fixes #611213 2010-03-08 17:47:55 +01:00
Wim Taymans
968c981e74 h263pay: fix typo in debug 2010-03-08 17:47:14 +01:00
Edward Hervey
869ff4263f matroskademux: Make sure we don't send invalid newsegments 
Fixes #611501
 2010-03-02 21:20:45 +01:00
Edward Hervey
be186bd089 matroskademux: Mark streams as being EOS at the right time. 
This allows us to stop streaming only when all streams have gone past the
segment.stop and not before.

Fixes #611501
 2010-03-02 21:20:31 +01:00
Sebastian Dröge
ad71d43f52 matroskademux: Advance sparse streams only as much as required to keep the gap smaller than 500ms 
Changing it to the newest timestamp that was ever pushed will
increase the segment start in 500ms jumps, which could be just
after the next sparse stream buffer. E.g.

Video at 1.0s, sparse stream at 0.5s would jump the
sparse stream to 1.0s. Now a new sparse stream buffer could
appear that has a timestamp of 0.9s and this would be
dropped for no good reason because of bad luck.
 2010-02-27 12:20:06 +01:00
Alessandro Decina
49b2a94644 Make sure FLUSH_STOP is sent so not to leave downstream flushing. 2010-02-24 02:05:49 +01:00
Sebastian Dröge
bcd06ea527 rtpjitterbuffer: Reset skew detection after instantiating the jitterbuffer 
...not only when going to READY. This sets high_level and friends to
a more useful value.
 2010-02-23 17:24:03 +01:00
Sebastian Dröge
0a12e69024 rtpjitterbuffer: Return 100 if high-level is 0 instead of dividing by zero 2010-02-23 17:20:02 +01:00
Wim Taymans
3a09d334a0 rtpmp4gdepay: avoid division by 0 
Avoid a division by 0 when no constantDuration was specified and when out two
timestamps are equal.

Fixes #610265
 2010-02-23 12:58:03 +01:00
Wim Taymans
e43839eae9 dvdepay: don't output frames until we have a header 
Wait for the complete first 6 header DIF packets before outputting a frame.
Decoders need this info to correctly decode the data.

Fixes #610556
 2010-02-23 12:54:36 +01:00
Tim-Philipp Müller
8c46cce875 flvdemux: minor micro-optimisation 
We know these values don't change during the loop, but the compiler
doesn't and has to re-check them for every iteration.
 2010-02-19 12:13:08 +00:00
Tim-Philipp Müller
ec9add84a8 flvdemux: remove static keyword from variables that shouldn't be static 
Multiple flvparse/flvdemux instances should be able to operate without
trampling over each other by accidentally re-using the same (static)
variables. (Spotted by Mark Nauwelaerts)
 2010-02-19 12:13:07 +00:00
Tim-Philipp Müller
07fa73f199 docs: add Since: markers for new jitterbuffer properties 2010-02-19 12:13:07 +00:00
Robert Swain
8d801f41d8 qtdemux: Fix off-by-one logic error in frame rate cap regression commit 2010-02-18 18:20:24 +01:00
Thiago Santos
f1c61e1d84 qtdemux: Use the correct duration when comparing segments 
Do not confuse QtDemuxSegments with GstSegments when
comparing the total file duration with the segment duration

Fixes #610296
 2010-02-18 07:53:34 -03:00
Robert Swain
2723de585e qtdemux: add durations modulo 1<<32 
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.

Fixes #610280
 2010-02-17 18:06:29 +01:00
Anders Skargren
6a877b2e6d multipartdemux: improve header mime-type parsing 
Make the handing of the mime type within the "boundary" a bit less naive.
The standard for MIME allows parameters to follow the "type" / "subtype"
clause separated from the mime type by ';'.

Modifies the multipartdemuxer's header parsing so it doesnt assume
the whole line after "content-type:" is the mime type and thus makes it a bit
more resilient to finding absurd mime types in the case where parameters are
added.

Fixes #604711
 2010-02-16 21:05:24 +01:00
Wim Taymans
a0b651bf5b rtspsrc: avoid stopping NULL tasks 
Check the task for NULL, it could be paused and set to NULL before.
 2010-02-16 19:54:32 +01:00
Mark Nauwelaerts
d14685eb08 qtdemux: fix ALAC codec-data handling 
ALAC codec-data apparently comes in (at least) two flavours (mov, mp4),
so use atom based parsing to retrieve required data, rather than
aiming for a specific offset.

See also #580731.
 2010-02-16 16:22:28 +01:00
Mark Nauwelaerts
105d8c925b qtdemux: fix debug message 2010-02-16 16:09:36 +01:00
Mark Nauwelaerts
58d84a993c qtdemux: handle signed values in 3GPP location tag 2010-02-16 16:09:26 +01:00
Mark Nauwelaerts
87e80aab57 rtspsrc: fix typo in debug message 2010-02-16 16:07:21 +01:00
Mark Nauwelaerts
172c0c6a6a avidemux: reset some more stream state after seek 
In particular, fixes non-flushing seek.
 2010-02-16 15:03:59 +01:00
Robert Swain
e2f5409d40 qtdemux: Fix frame rate cap regression 
Look for a non-zero min_duration during initialisation to avoid
incorrect frame rate caps.
 2010-02-16 14:44:11 +01:00
Brian Cameron
a45b351ddf matroska: fix GST_ELEMENT_ERROR usage 
Fixes #610053.
 2010-02-16 01:40:19 +00:00
Wim Taymans
9d40d60960 rtpbin: remove use of ntp_ns_base 2010-02-15 21:36:29 +01:00
Wim Taymans
5a4ecc9da1 rtpbin: remove more ntpnstime and cleanups 
Remove some code where we pass ntpnstime around, we can do most things with the
running_time just fine.
Rename a variable in the ArrivalStats struct so that it's clear that this is the
current system time.
 2010-02-15 21:36:29 +01:00
Wim Taymans
74241e549f rtpsource: use running_time for jitter 
Use the running_time to calculate the jitter instead of the ntp time. Part of
the plan to get rid of ntpnsbase.
 2010-02-15 21:36:29 +01:00
Wim Taymans
83cb1aecc8 rtpbin: change how NTP time is calculated in RTCP 
Don't calculate the NTP time based on the running_time of the pipeline but from
the systemclock. This allows us to generate more accurate NTP timestamps in case
the systemclock is synchronized with NTP or similar.
 2010-02-15 21:36:29 +01:00
Tim-Philipp Müller
0233257612 matroska: fix printf format string 2010-02-15 10:33:02 +00:00
Tim-Philipp Müller
63c86ac3d8 raw1394, matroska, rtpmanager: remove padding from structures 
None of these element and class structures are in public headers,
so don't need padding.
 2010-02-15 00:50:10 +00:00
Edward Hervey
fa0e3184dd flvdemux: Audio tags without any content are valid. 
We silently ignore them instead of erroring out.
 2010-02-13 18:18:42 +01:00
Edward Hervey
817911664e flvdemux: Fix GST_CLOCK_DIFF usage. 
It was previously checking for DIFF(a, b > 6 * GST_SECOND) instead of
the proper DIFF(a,b) > 6 * GST_SECOND
 2010-02-13 18:07:50 +01:00
Edward Hervey
d263119589 flvdemux: Don't forget to reset the indexed variable when cleaning up 2010-02-13 16:27:07 +01:00
Edward Hervey
0dd06da5e8 flvdemux: Speedup GstIndex usage 
Used the _add_associationv variant of GstIndex since we know how many
associations we're adding. Trims up to 50% from index generation time.

Note : It would be great if the index could be generated on the fly or
on request as opposed to being fully created at startup.
 2010-02-13 14:57:59 +01:00
Wim Taymans
7f08081016 jitterbuffer: don't resync to invalid timestamps 
If we detect backward timestamps on the server, don't try to resync when we
don't have an input timestamp (such as when using RTSP over TCP) instead, do
nothing but assume the timestamp was ok, it will correct itself when time goes
forwards.
 2010-02-12 19:32:27 +01:00
Wim Taymans
d344754f03 rtpbin: fix typo 2010-02-12 17:22:56 +01:00
Wim Taymans
772eca5aff jitterbuffer: start out active and not buffering 
There is no need to set the latency in the jittebuffer in _init, we will set
that later when going to PAUSED.
Set the jitterbuffer active and not buffering when starting.
 2010-02-12 17:22:56 +01:00
Wim Taymans
8bbfd94c25 rtpbin: more buffering work 
When deactivating jitterbuffers when the buffering starts, keep the current
percent of the jitterbuffer and also set the jitterbuffer in the buffering state
so that we know when it's filled again.
Add property to get the buffering percentage of the jitterbuffer.
 2010-02-12 17:22:56 +01:00
Wim Taymans
e6e287cdcc rtpjitterbuffer: adjust latency in buffer mode 
When we are in buffer mode, adjust the buffering low/high thresholds based on
the total configured latency. If we don't and there is a huge queue or element
with a big latency downstream we might drain the complete queue immediately and
start buffering again.
 2010-02-12 17:22:55 +01:00
Wim Taymans
ab73603031 jitterbuffer: add ts-offset to timestamp 
Add the ts-offset to the buffer timestamp to get the final output timestamp of
the buffer.
 2010-02-12 17:22:55 +01:00
Wim Taymans
74a3be350d rtpbin: do more accurate buffer offsets 
Return the next timestamp in the jitterbuffer.
Use the min-timestamp of the jitterbuffers to calculate an offset so that the
next timestamp is pushed with a timestamp equal to running_time.
Start producing timestamps from 0 in the buffering case too.
 2010-02-12 17:22:55 +01:00
Wim Taymans
3efcc0fbc1 rtpbin: only start buffering when < 100% 
Only start buffering when the percentage message is < 100 %.
 2010-02-12 17:22:55 +01:00
Wim Taymans
0348ebe651 rtpbin: keep track of elapsed pause time 
Keep track of the time we spend pausing the jitterbuffers when they were
buffering and distribute this elapsed time to the jitterbuffers.
Also keep the latency in nanosecond precision.
 2010-02-12 17:22:54 +01:00
Wim Taymans
ecf6ed8fc1 jitterbuffer: keep track of offset 
Keep track of an outgoing offset that we add to each outgoing buffer to
compensate for PAUSE when buffering.
Adjust the offset when activating.
 2010-02-12 17:22:54 +01:00
Wim Taymans
048e5b6fbe jitterbuffer: report level using high watermark 2010-02-12 17:22:54 +01:00
Wim Taymans
8d814f3782 rtpbin: pass running_time to jitterbuffer pause 
Pass the current running time to the jitterbuffer when pausing or resuming so
that it calculate the right offsets.
Small cleanups and comments.
Set the default rtspsrc latency to 2 seconds.
 2010-02-12 17:22:54 +01:00
Wim Taymans
bf697b12e3 rtpbin: add some comments 2010-02-12 17:22:53 +01:00
Wim Taymans
20a27a545a rtpbin: more buffering updates 
Add signal to pause the jitterbuffer. This will be emitted from gstrtpbin when
one of the jitterbuffers is buffering.
Make rtpbin collect the buffering messages and post a new buffering message with
the min value.
Remove the stats callback from jitterbuffer but pass a percent integer to
functions that affect the buffering state of the jitterbuffer. This allows us
then to post buffering messages from outside of the jitterbuffer lock.
 2010-02-12 17:22:53 +01:00
Wim Taymans
a5b9d3f917 rtpbin: propagate buffer-mode property 
Propagate buffer-mode property to the jitterbuffers.
Intercept BUFFERING messages in rtpbin
 2010-02-12 17:22:53 +01:00
Wim Taymans
d3db9574a9 jitterbuffer: do more buffering implementation 
Add callback for buffering stats.
Configure the latency in the jitterbuffer instead of passing it with _insert.
Calculate buffering levels when pushing and popping
Post buffering messages.
 2010-02-12 17:22:52 +01:00
Wim Taymans
aeacbfed3e jitterbuffer: flesh out buffering mode some more 
Add a buffering state to the jitterbuffer and wait until buffering ends before
pushing out packets.
 2010-02-12 17:22:52 +01:00
Wim Taymans
56b29c9a6b jitterbuffer: hook up the mode property 
Expose a mode property on the jitterbuffer.
Fix the case where timestamps are -1 in the check for outgoing timestamps.
 2010-02-12 17:22:52 +01:00
Wim Taymans
be4517a6b8 jitterbuffer: add buffering mode options 
Add getters and setters for different buffering modes that the jitterbuffer will
support. Default to the current slave mode.
 2010-02-12 17:22:52 +01:00
Robert Swain
bf9d8dbbdc flvdemux: Obtain the index from the end of an flv file in push mode 
Allows for better support of seeking in flv files when in push mode
 2010-02-12 16:25:44 +01:00
Robert Swain
dd23397b4f avidemux: Drop video frames up to the desired keyframe after a seek 
The audio packets in AVI are generally muxed ~0.5s before the
corresponding video packet. This changes causes downstream to only
receive packets with roughly corresponding timestamps.
 2010-02-12 15:56:18 +01:00
Wim Taymans
1175d0698c avidemux: more DISCONT handling 
Add some debug in the DISCONT handling code.
When we receive a DISCONT in push mode, mark all streams as DISCONT.
 2010-02-12 15:56:18 +01:00
Robert Swain
0011c9b0da avidemux: Fix _handle_seek_push () and new segement behaviour 2010-02-12 15:56:18 +01:00
Wim Taymans
2ce79998a1 avidemux: cleanups 
Make sure we reset the demuxer correctly wrt parsing the index.
Don't leak pending seek events.
Rename some methods to reflect what they do and to avoid confusion with similar
method names.
Try to make the seeking threadsafe by protecting the setup code with a lock.
Make sure we post errors when a seek fails.
 2010-02-12 15:56:18 +01:00
Wim Taymans
e6cc145352 avidemux: rename some variables 
seek_event -> seg_event
event_seek -> seek_event
 2010-02-12 15:56:18 +01:00
Wim Taymans
784d888cb2 avidemux: take fallback duration from avih 
When we have not parsed any indexes yet, we don't know the length of the streams
and we must take the length given in the avih as a fallback.
Avoid some typechecking.
 2010-02-12 15:56:18 +01:00
Robert Swain
3e1ed0c727 avidemux: Push mode seeking support 2010-02-12 15:56:18 +01:00
Wim Taymans
c2dfc94b1d rtspsrc: cleanup properties 
Use more default constants.
Use static strings param flag.
Init properties explicitly instead of letting gobject do this.
 2010-02-12 15:20:07 +01:00
Stefan Kost
f003fef3ad taginject: fix multi-value tag example 
We need to use {} to specify a list.
 2010-02-12 15:35:30 +02:00
Stefan Kost
ef343d8ad9 avi,wav: also handle JUNQ chunk in addition to JUNK 2010-02-12 15:35:30 +02:00
Wim Taymans
ad6d4540a7 rtppay: don't ignore result from set_outcaps 
set_outcaps can fail and we need to propagate the result upstream.
 2010-02-12 13:53:58 +01:00
Wim Taymans
1f9c39da2a flvparse: fix confusing debug messages 2010-02-12 13:53:58 +01:00
Wim Taymans
99a581215f jitterbuffer: add some more debug info 2010-02-12 13:53:57 +01:00
Wim Taymans
caec8d9837 videomixer: fix timestamp problems 
When the pad with the highest framerate goes EOS, instead of not timestamping
output buffers, intepollate timestamps and durations from the last seen ones.

Fixes #608026
 2010-02-12 13:53:57 +01:00
Sebastian Dröge
919e93f1b2 [MOVED FROM BAD 29/29] shapewipe: Preserve the input color values in all cases 2010-02-12 11:12:35 +01:00
Sebastian Dröge
e9f9f4cfd4 [MOVED FROM BAD 28/29] shapewipe: Scale mask alpha values by the source alpha values 2010-02-12 11:12:35 +01:00
Sebastian Dröge
8786380c9a [MOVED FROM BAD 27/29] shapewipe: Fix ARGB processing 2010-02-12 11:12:35 +01:00
Sebastian Dröge
6e086c8e2f [MOVED FROM BAD 25/29] shapewipe: Improve/add debug output 2010-02-12 11:12:34 +01:00
Sebastian Dröge
4d038dc516 [MOVED FROM BAD 24/29] shapewipe: Always hold the mask mutex before signalling the GCond 2010-02-12 11:12:34 +01:00
Sebastian Dröge
e2ab650079 [MOVED FROM BAD 23/29] shapewipe: Move chain function error cases at the end of the function and add useful debug output 2010-02-12 11:12:34 +01:00
Sebastian Dröge
11a16e95e2 [MOVED FROM BAD 22/29] shapewipe: Fix race condition during shutdown that can lead to a deadlock 2010-02-12 11:12:34 +01:00
Sebastian Dröge
69b9c76dc8 [MOVED FROM BAD 21/29] shapewipe: Drop mask buffer on FLUSH events 2010-02-12 11:12:34 +01:00
Sebastian Dröge
104471f517 [MOVED FROM BAD 20/29] shapewipe: Update copyright year 2010-02-12 11:12:34 +01:00
Sebastian Dröge
a089677871 [MOVED FROM BAD 19/29] shapewipe: Don't reset properties when going PAUSED->READY 
Also use defines for the default values of the properties.
 2010-02-12 11:12:34 +01:00
Sebastian Dröge
89605b416b [MOVED FROM BAD 18/29] shapewipe: Replace floating point arithmetic in the inner processing loops by integer arithmetic 2010-02-12 11:12:34 +01:00
Sebastian Dröge
5f2e64e3a0 [MOVED FROM BAD 17/29] shapewipe: Don't do pointer dereferences in the processing loop 
Lowers the time taken there in my testcase from 6.91% to 6.20%
as measured by callgrind.
 2010-02-12 11:12:34 +01:00
Sebastian Dröge
41eed9dcca [MOVED FROM BAD 16/29] shapewipe: Add BGRA support for video in/output 2010-02-12 11:12:33 +01:00
Sebastian Dröge
9716cb9935 [MOVED FROM BAD 15/29] shapewipe: Add support for ARGB video input/output 2010-02-12 11:12:33 +01:00
Sebastian Dröge
76a21dec7f [MOVED FROM BAD 14/29] shapewipe: Correctly handle 0/1 fps 2010-02-12 11:12:33 +01:00
Sebastian Dröge
809d15428c [MOVED FROM BAD 13/29] shapewipe: Implement basic QoS 
This change is based on Tim's QoS implementation
for jpegdec.
 2010-02-12 11:12:33 +01:00
Sebastian Dröge
5fba6963ff [MOVED FROM BAD 12/29] shapewipe: Proxy queries on the video pads to the correct peers 2010-02-12 11:12:33 +01:00
Sebastian Dröge
48dd557fea [MOVED FROM BAD 11/29] shapewipe: Proxy bufferalloc on the video sinkpad 2010-02-12 11:12:33 +01:00
Sebastian Dröge
91668db57c [MOVED FROM BAD 10/29] shapewipe: Try to work inplace if possible 
This saves one new, large allocation per frame for the
most cases.
 2010-02-12 11:12:33 +01:00
Sebastian Dröge
e5d41ba407 [MOVED FROM BAD 08/29] shapewipe: Fix some issues that were exposed by the new unit test 2010-02-12 11:12:33 +01:00
Sebastian Dröge
e207e7b8a3 [MOVED FROM BAD 06/29] shapewipe: Add documentation and integrate into the build system 2010-02-12 11:12:32 +01:00
Sebastian Dröge
19a0764537 [MOVED FROM BAD 05/29] shapewipe: Adjust border to still have everything transparent at 1.0 and the other way around 2010-02-12 11:12:32 +01:00
Sebastian Dröge
88f4bd4efd [MOVED FROM BAD 04/29] shapewipe: Divide the border value by two, otherwise we use a twice a wide border 2010-02-12 11:12:32 +01:00
Sebastian Dröge
c0f9553707 [MOVED FROM BAD 03/29] shapewipe: Add border property to allow smooth borders 
...and use a border of 0.01 in the example application.
 2010-02-12 11:12:32 +01:00
Sebastian Dröge
12a27a46f9 [MOVED FROM BAD 01/29] shapewipe: Add a simple shapewipe transition filter & example application 2010-02-12 11:12:32 +01:00
Robert Swain
4aff3e48be qtdemux: temporary safety check to avoid crashes with a certain file 
Add temporary check to avoid crashes with a certain file when seeking
until the real cause of this is figured out. See #609405.
 2010-02-10 20:36:56 +00:00
Robert Swain
7877ffb6f5 qtdemux: skip unknown atoms when looking for moov 
Fixes bug #609107
 2010-02-07 10:56:02 +01:00
Robert Swain
9ed6c58006 qtdemux: Set the segment start time to the requested seek time for non-keyframe seeks 2010-02-04 18:54:58 +00:00
Robert Swain
8d4f70c5ce qtdemux: Fix time returned for index at a byte offset 
The logic for searching forwards/backwards was swapped
 2010-02-04 18:54:53 +00:00
Mark Nauwelaerts
f0d6b841a2 matroskademux: improve stream synchronization 
In particular, do not make it send newsegment updates that
sort-of contradict the indented playback segment (e.g. start time).
 2010-02-02 16:54:05 +01:00
Mark Nauwelaerts
b527360f21 matroskademux: fix bridging (time) gaps in streams 
As a side effect, avoid sending newsegment updates with start times
that go back and forth, which leads to bogus downstream running_time.

Also fixes seeking in bug #606744.
 2010-02-02 16:53:56 +01:00
Mark Nauwelaerts
9bec2b1127 matroskademux: fix stream synchronization 
.. by initializing streams starting at 0, as that is basically
where we 'seek to' at the start and assume streams to start elsewhere.
Also enables newsegment update events for subtitle streams.
 2010-02-02 16:53:51 +01:00
Wim Taymans
c35a984801 rtspsrc: free transports on errors 
See #608564
 2010-02-01 19:32:11 +01:00
Robert Swain
f9bf5970a3 flvmux: index timestamps should be in seconds, not milliseconds 2010-01-27 20:24:41 +01:00
Mark Nauwelaerts
71e35b2bf3 rtpspeexpay: fix occasional buffer leak 
Fixes #608255.
 2010-01-27 17:05:34 +01:00
Sebastian Dröge
41b17ec2a7 videomixer: Fix assembly register constraints 
Fixes bug #608209.
 2010-01-27 16:35:10 +01:00
Wim Taymans
01f0a5ce32 avidemux: ignore streams that finished 
When we receive an UNEXPECTED from a stream, move to the next stream and only go
EOS when all streams are EOS. When selecting a stream to push, ignore streams
that went EOS.

Fixes #607949
 2010-01-26 11:22:56 +01:00
Edward Hervey
cb0474b6b3 qtdemux: dmb1 is a valid fourcc for Motion-JPEG 2010-01-23 14:47:55 +01:00
Edward Hervey
a782ef3ce8 qtdeux: IV32 is also used for Indeo 3 video streams 2010-01-23 14:20:02 +01:00
Roland Krikava
8a80fdaad1 qtdemux: Avoid negative overflow on keyframe search 
Do not overflow negatively when searching a previous
"keyframe" on audio streams. Could cause infinite loops
on backwards playback

Fixes #607718
 2010-01-21 23:20:34 -03:00
Alessandro Decina
5d3d3f28e1 qtdemux: fix compiler warnings under OS X. 2010-01-21 19:24:22 +01:00
Wim Taymans
7d39f8e5bb avidemux: don't parse NULL indexes 
for some streams we might fail to fetch the index offsets. Don't try to parse
NULL indexes in those cases.
 2010-01-21 17:59:25 +01:00
Olivier Crête
9afc247906 rtpg729pay: ptime should is in nanoseconds 
https://bugzilla.gnome.org/show_bug.cgi?id=607403
 2010-01-21 10:54:14 +01:00
Thiago Santos
ef2b7bbcab wavenc: Post warning if file isnt finished properly 
When the pipeline is shut down and the file isn't
finished properly, wavenc should post a warning.

Fixes #607440
 2010-01-20 15:11:15 -03:00
Arnout Vandecappelle
ca41ddda75 matroskamux: make index size configurable. 
Added the 'min-index-interval' property to matroskamux,
which determines how much time (nanoseconds) is left
between keyframes stored in the index.

Fixes #583985.
 2010-01-20 14:37:20 -03:00
Wim Taymans
1f6b06ce66 rtph264pay: scale spspps_interval to milliseconds 
The spspps_interval is kept in seconds. Convert it to milliseconds before
comparing it to another value in milliseconds.
 2010-01-20 16:29:57 +01:00
Mark Nauwelaerts
8ca984d5e8 qtdemux: always keep media segments within total duration 
... as opposed to only doing so following a seek.
 2010-01-20 16:03:21 +01:00