gst_h264_parser_parse_{sps,pps} APIs were used to parse SPS/PPS and
also in order to update parser's internal state at once. Meanwhile
gst_h264_parse_{sps,pps} APIs are to parse SPS/PPS without state update.
This commit introduces new APIs so that only accepted SPS/PPS by user
can be updated to be used by parser.
... and store all parsed values.
We are storing pic_struct_present_flag although it's not part of
this SEI message but GstH264PicTiming includes it to clarify
following syntax values.
In addition to that, by adding CpbDpbDelaysPresentFlag, we don't need to
refer to VUI anymore.
As per specification in A.3.1 h) and A.3.2 f), the maximum size of the DPB is
16. Fix the maximum in the fine and fix the formula to use MIN instead of MAX
so that we no longer always use the maximum for the profile/level.
If decoding failed because end_picture() failed, set the picture to
nonexisting, this way output_picture() will be skipped. This avoids confusing
special cases in output_picture() implementation.
gsth265parser does it already. Although corresponding API of h265parser is
gst_h265_sei_free, _clear suffix is more consistent naming for h264parser
since there are gst_h264_{sps,pps}_clear().
According to following two specs, add support for AC4 in tsdemux.
1. ETSI TS 103 190-2 V1.2.1 (2018-02) : Annex D (normative): AC-4 in MPEG-2 transport streams
2. ETSI EN 300 468 V1.16.1 (2019-08) : Annex D (normative):Service information implementation of AC-3, EnhancedAC-3, and AC-4 audio in DVB systems
That's the value of NumDeltaPocs[RefRpsIdx] and we might be able to derive
the value from given sps and slice header.
Because well known hardware implementations refer to the value, however,
storing the value makes things easier.
Following is the list of hardware implementations
* DXVA2: ucNumDeltaPocsOfRefRpsIdx
* NVDEC/VDPAU: NumDeltaPocsOfRefRpsIdx
See C.5.2.2 Output and removal of pictures from the DPB.
If the number of pictures in the DPB is greater than or equal to
sps_max_dec_pic_buffering_minus1[HighestTid] + 1, then the picture
should be outputted.
On new_segment, the decoder is expected to negotiate. The decoder may want to
pre-allocate the needed buffers. Pass the max_dpb_size as this is needed to
determin how many buffers should be allocated.
This introduce a library which contains a set of base classes which
handles the parsing and the state tracking for the purpose of decoding
different CODECs. Currently H264, H265 and VP9 are supported. These
bases classes are used to decode with low level decoding API like DXVA,
NVDEC, VDPAU, VAAPI and V4L2 State Less decoders. The new library is
named gstreamer-codecs-1.0 / libgstcodecs.
Add a missing dependency to wl_client_dep for the wayland build. Some distros
have the wayland-client headers not installed in /usr/include (which is perfectly
valid, the pkg-config .pc file gives the right feedback).
Instead of synchronising at the ICE transport, do clock sync for the
RTP stream at the DTLS transport via the dtlssrtpenc rtp-sync
property. This avoids delaying RTCP while waiting until it is time
to output an RTP packet when rtcp-mux is enabled.
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1212
Posting any message to parent seems to be pointless. That might break
parent window.
Regardless of the posting, parent window can catch mouse event
and also any keyboard events will be handled by parent window by default.
It's currently the only sane way we can use MoltenVK functions to
integrate with Metal API.
It also removes the need to specify the VK_ICD_FILENAMES environment
variable pointing to MoltenVK_icd.json.
Includes a new GstVulkanHandlePool base class for pooling different
resources togther. The descriptor cache object is ported to
GstVulkanHandlePool with the exact same functionality.
A new GstVulkanFenceCache is also implemented for caching fences
which is used internally by GstVulkanDevice for creating or reusing
fences.
The existing GstVulkanTrashFenceList object now caches trash objects.
Part 1 is a base class (vkvideofilter) that handles instance, device,
queue retrieval and holding that has been moved to the library
Part 2 is a fullscreenrenderquad that is still in the plugin that
performs all of the previous vulkan-specific functionality.
Weak refs don't quite work here correctly as there is always a race with
taking the lock between find_view() and remove_view(). If find_view()
returns a view that is going to removed by remove_view() then we have an
interesting situation.
In theory, the number and type of views for an image are relatively
constant and should not change one they've been set up which means that
it is actually practical to perform pool-like reference counting here
where the image holds a pool of different views that it can give out
as necessary.
It broke after removal of usage of GTimeVal that was deprecated,
it requires seconds in this unix-based creation instead of microseconds.
The downside here is that it will create an extra object just to be
discarded in order to add the microsecond part to it.
It would end up segfaulting as it would return a NULL value
Exposure mode property, extra colour tone values (aqua, emboss, sketch, neon), extra scene modes (backlight, flowers, AR, HDR).
Missing vmethods for exposure mode, analog gain, lens focus, colour temperature, min & max exposure time
Contribs by Mohammed Sameer <msameer@foolab.org>, Adam Pigg <adam@piggz.co.uk>
The symbol visibility=hidden flag was only being applied to C
compilation, so plugins implemented in C++ would leak extra symbols
than the 2 _get_desc() and _register().
That also showed that the gst-libs opencv C++ lib was not marking
symbols for export correctly because the BUILDING_GST_OPENCV define
wasn't in the C++ args, so fix that too.
The major functionality gain this provides is proper reference counting
for a descriptor set. Overall this allows us to create descriptor sets
when they are needed (or reused from a cache) without violating any of
vulkan's object synchronisation requirements.
As there are a fixed number of sets available in a pool, the number of
descriptors in elements is currently hardcoded to 32. This can be extended
in a future change to create pools on the fly if that limit is ever overrun.
Allows a cleaner control flow when there is no fence available for use
with the trash list. An always signalled fence type will always return
TRUE for gst_vulkan_fence_is_signalled.
Serve two purposes:
1. refcounting of vulkan handles with associated destruction. When
combined with the trash list, the user can ensure destruction at
the correct time according to the vulkan rules.
2. avoids polluting our API with 32-bit vs 64-bit integer/pointers
differences as exposed through the vulkan API. on 32-bit, vulkan
non-dispatchable handles are 64-bit integers and on 64-bit, they
are pointers.
By passing NULL to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
This adds two properties:
* scte-35-pid: If not 0, enables the SCTE-35 support for the current
program. This will write the proper PMT and send SCTE-35 NULL
commands (i.e. heartbeats) at a regular interval
* scte-35-null-interval: This specifies the interval at which the
NULL commands should be sent
Sending SCTE-35 commands is done by creating the appropriate SCTE-35
GstMpegtsSection and then sending them on the muxer. See the
associated example
Commit 8a56a7de6d (camerabin2: preview:
Appsink doesn't need to sync) add a line that set the "sync" property on
the appsink. However, the author seems to forget that there's another
property setting on appsink a few lines below.
It's very likely that the added line is required because the original
line doesn't take effect (maybe because it's too late). But for whatever
reason, the original line is now redundant. So, I remove it in this
commit.
GstTranscoder adds extra_args for gir which call gst_init() during
introspection. These extra arguments are the same as the standard
ones defined in the top level meson.build as "git_init_section",
However, the top level definition also ensures an empty plugin
repository is used.
Because GstTranscoder does not use the standard args, plugins get
loaded when it is introspected. Since some of the plugins fail
without specific hardware, this causes #1100.
This patch makes it use gir_init_section.
Fixes#1100.
Some hardware decoders, for example Hantro G1, have to be told the
size of the pic_order_cnt related syntax elements pic_order_cnt_lsb,
delta_pic_order_cnt_bottom, delta_pic_order_cnt[0], and
delta_pic_order_cnt[1] in bits.
Some hardware decoders, for example Hantro G1, have to be told the size
of the dec_ref_pic_marking() syntax element in bits. Record the size so
it can be passed on to the hardware.
The calculated size of short_term_ref_pic_set is not a part of
HEVC syntax but the value is used by some stateless decoders
(e.g., vaapi, dxva, vdpau and nvdec) for the purpose of skipping
parsing the syntax by the accelerator.
