Previously we would use the object lock only for storing the sync
handler and its user_data in a local variable, then unlock it and only
then call the sync handler. Between unlocking and calling the sync
handler it might be unset and the user_data be freed, causing it to be
called with a freed pointer.
To prevent this add a refcounting wrapper struct around the sync
handler, hold the object lock while retrieving it and increasing the
reference count and only actually free it once the reference count
reaches zero.
As a side-effect we can now also allow to actually replace the sync
handler. Previously it was only allowed to clear it after initially
setting it according to the docs, but the code still allowed to clear it
and then set a different one.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/506
Keep the ANY caps empty internally when appending and merging
caps/structures. Previously, an ANY caps could end up containing
internal structures, which could be fetched by the user, and gave the
caps a non-zero length.
Also, made sure that `gst_caps_set_features_simple` frees the features
if caps is empty.
Fixed gst_caps_is_strictly_equal() to take into account whether either of
the caps are ANY caps. Previously, two ANY caps could be considered not
strictly equal if one of them still contained some remnant *internal*
structure (this can happen if an ANY caps has emerged from an append or
merge operation). Also, an ANY caps with no remnant internal structures
was considered strictly equal to an EMPTY caps. Similarly, a non-ANY caps
was considered strictly equal to an ANY caps if its remnant internal
structures happened to match.
Also changed gst_caps_is_fixed to take into account that an ANY caps
should not be considered fixed even if it contains a single remnant
internal fixed structure. This affects gst_caps_is_equal(), which uses a
separate method if both caps are fixed. Previously, this meant that a
non-ANY fixed caps was considered equal to an ANY caps if it contained a
single matching remnant internal structure.
Added some tests for these two equality methods, which covers the above
examples, as well as asserts existing behaviour.
Fixes#496
GST_CLOCK_TYPE_TAI is GStreamer abstraction for CLOCK_TAI. Main
motivation for this patch is support for transmission offloading features
- when network packets are timestamped with the time they are deemed to
be actually transmitted. Linux API for that requires that time to be
in CLOCK_TAI coordinate.
With GST_CLOCK_TYPE_TAI, applications can use CLOCK_TAI directly on
their pipelines, avoiding the need to cross timestamp packet times. By
leveraging system's CLOCK_TAI, applications also don't need to keep track
of leap seconds - less burden for them. Just keep system's CLOCK_TAI
accurate and use it.
This would cause us to set GST_GROUP_ID_INVALID as group-id in the
aggregated STREAM_START message if there are no sinks at all or none of
them have a STREAM_START message, which is simply wrong.
If we have not a single STREAM_START message then the bin should not be
considered STREAM_START.
They are optional on STREAM_START messages/events but if available
should have at least a valid value.
For STREAM_GROUP_DONE events don't allow creating it with an invalid
group id as this does not make any sense.
Introducing "GST_PLUGIN_FEATURE_RANK" environment variable in order for users
to adjust rank of plugin(s) via environment.
A "feature" and "rank" key-value pair should be separable by ":",
and each key-value pair is recognized per "," delimiters. The rank
can be a numerical value or one of pre-defined rank values
such as "NONE", "MARGINAL", "SECONDARY", and "PRIMARY" in case-insensitive manner.
In addition to pre-defined { NONE, MARGINAL, SECONDARY, PRIMARY },
"MAX" can be passed to key value used to ensure having a higher rank
than other plugin features.
Example)
- GST_PLUGIN_FEATURE_RANK=qtdemux:256,h264parse:NONE
Set rank of qtdemux plugin to 256 (primary) and 0 (none) for h264parse.
If you're using a custom log handler, you had to reverse-engineer the
debug log format and create your own format function. Now, you can
call `gst_debug_log_get_line()` and it will return a string (without
ANSI escape color codes) representation instead.
This is useful in situations when you need to log the ordinary
gst_debug log to a resource that can't be opened as a `FILE` handle.
Also includes a test.
A common use case of a dynamically built pipeline is that you want to
(conditionally) find a certain element, e.g. the `rtpbin`s in a
`uridecodebin`. If that element has a fixed name inside its parent bin
(and only has a single instance) this can be easily done by
`gst_bin_get_by_name()`.
If there are multiple instances of the element however, you can only use
`gst_bin_iterate_all_by_interface()`, but this doesn't work if you don't
have the specific `GType` (which is often the case, due to plugins being
dynamically loaded). As such, another fallback could be to use the
well-known name of the element's factory (in case of our example, this
is of course `"rtpbin"`).
According to [1] EINTR is a possible errno for fsync(),
so handle it as all other EINTR (do/while(errno == EINTR)).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
According to [1] EINTR is a possible errno for fsync(),
so handle it as all other EINTR (do/while(errno == EINTR)).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Without this it is possible that we have a GSource with reference count
0 stored in the GstBus that is currently in the process of being
destroyed. gst_bus_remove_watch() might then access it, increase its
reference count to 1 again, call GSource API on it and then unref it,
which will then finalize it a second time.
The dispose function allows the GSource to be resurrected until it
returned so the above would be safe now.
This caused some spurious crashes during shutdown in various
applications.
It fixes below gir warnings.
../subprojects/gstreamer/gst/gstevent.c:2246: Warning: Gst:
gst_event_new_instant_rate_sync_time: unknown parameter
'rate_multiplier' in documentation comment, should be 'rate'
../subprojects/gstreamer/gst/gstevent.c:2296: Warning: Gst:
gst_event_parse_instant_rate_sync_time: unknown parameter
'rate_multiplier' in documentation comment, should be 'rate'
After release bison 2.5 the declaration %pure-parser was deprecated
in favor of %define api.pure
Nonetheless, until bison 3.4, the declaration was treated as backward
compatibility, but now bison shows a warning:
warning: deprecated directive, use ‘%define api.pure’
The patch's approach is to handle both directives according with the
used bison's version, by string replacement at source configuration
stage.
When playing gapless there were situations when some sticky events
like tags were stuck at some pad and then revived much later.
Therefore it is better to clear them upon stream-start.
Fixes#360
A seek with that flag set must be non-flushing, not change the playback
direction and start/stop position. A seek handler will then send the new
GST_EVENT_INSTANT_RATE_CHANGE event downstream for downstream elements
to immediately apply the new playback rate before the new in-band segment
event arrives.
The argument must be at least a GObject according to the GstLogFunction
definition, and while the default C log function handles miniobjects
just fine this is crashing bindings and user-supplied log functions that
(rightfully) don't expect anything but GObjects.
Not posting DEVICE_ADDED messages while a device provider is being
started makes things awkward for applications, as they have to call
get_devices() after starting the monitor.
This requires redundant code on the application side, and as far as
I understand also could cause race conditions, when a device gets
added between the calls to gst_device_monitor_start() and
gst_device_monitor_get_devices(), causing the application to "see"
the same device twice.
By passing NULL to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
gst_pad_iterate_internal_links is usually used to find a single internal
link that a pad has, e.g. to find the corresponding pad of a multiqueue.
Added a helper function that will return either a single internal link,
if there's no other, or NULL.
In cases with many long-lived buffers that have qdata only very
briefly, the memory overhead of keeping an array of 16 GstQData
structs for each buffer can be significant. We free the array when
the last qdata is removed, like it was done in 1.14.
Fixes#436
This patch simply add a null check around a case where a child may have
been unparented concurrently to the deep_add_remove operation. This was
found by accident in the form of an "IS_GST_OBJECT" assertion, but had
no other known side effect in that test.
`g_object_notify()` actually takes a global lock to look up the
`GParamSpec` that corresponds to the given property name. It's not a
huge performance hit, but it's easily avoidable by using the
`_by_pspec()` variant.