Commit graph

2013 commits

Author SHA1 Message Date
Sebastian Dröge
722ad08733 queue: Only unblock upstream waiting for the query once downstream is finished
... when flushing and deactivating pads. Otherwise downstream might have a
query that was already unreffed by upstream, causing crashes or other
interesting effects.

https://bugzilla.gnome.org/show_bug.cgi?id=763496
2016-05-15 11:06:08 +03:00
Sebastian Dröge
5e43ee5989 typefind: Only push a CAPS event downstream if the sinkpad is not in PULL mode
The other signal handlers of the type-found signal might have reactivated
typefind in PULL mode already, pushing a CAPS event at that point would cause
deadlocks and is in general unexpected by elements that are in PULL mode.

https://bugzilla.gnome.org/show_bug.cgi?id=765906
2016-05-11 15:06:39 +03:00
Matej Knopp
efb1955ffb multiqueue: Ignore time when determining whether sparse stream limits have been reached
Basically, sq->max_size.visible is never increased for sparse streams in
overruncb when empty queue has been found;

If the queue is sparse it just skip the entire logic determining whether
max_size.visible should be increased, deadlocking the demuxer.

What should be done instead is that when determining if limits have been
reached, to ignore time for sparse streams, as the buffer may be far in the
future.

https://bugzilla.gnome.org/show_bug.cgi?id=765736
2016-04-29 16:09:23 +03:00
Carlos Rafael Giani
3bd5aeac52 multiqueue: Recheck buffering status after changing low threshold
https://bugzilla.gnome.org/show_bug.cgi?id=763757
2016-04-15 16:04:54 +03:00
Carlos Rafael Giani
a1d2f387c6 multiqueue: Recalculate fill level after changing high-threshold
This ensures the following special case is handled properly:

1. Queue is empty
2. Data is pushed, fill level is below the current high-threshold
3. high-threshold is set to a level that is below the current fill level

Since mq->percent wasn't being recalculated in step #3 properly, this
caused the multiqueue to switch off its buffering state when new data is
pushed in, and never post a 100% buffering message. The application will
have received a <100% buffering message from step #2, but will never see
100%.

Fix this by recalculating the current fill level percentage during
high-threshold property changes in the same manner as it is done when
use-buffering is modified.

https://bugzilla.gnome.org/show_bug.cgi?id=763757
2016-04-15 16:04:54 +03:00
Vincent Penquerc'h
53a7a991e2 multiqueue: catch errors and flushing case after lock
This ensures we can not get into an indefinite wait on the
following cond var wait.

https://bugzilla.gnome.org/show_bug.cgi?id=764999
2016-04-14 09:12:27 +01:00
Havard Graff
1bc8d9f2ea valve: don't send sticky events as a direct response to upstream events
Also refactor the existing valve test to actually test the valve,
and not just test the EOS mechanism of a pad.

https://bugzilla.gnome.org/show_bug.cgi?id=763753
2016-03-24 14:50:50 +02:00
Tim-Philipp Müller
bc78548cfe capsfilter: optimisation: avoid unnecessary gst_pad_has_current_caps() checks
No need to do this for every input buffer, since it involves
locking and iterating of the sticky events array and such.

https://bugzilla.gnome.org/show_bug.cgi?id=763337
2016-03-24 14:48:40 +02:00
Edward Hervey
f87ec5e014 queue: Use full running time for level calculation
Ensures we have proper time level estimation for the cases where
the incoming buffers have PTS/DTS outside of the segment start/stop
values.

https://bugzilla.gnome.org/show_bug.cgi?id=762995
2016-03-24 14:42:31 +02:00
Sebastian Dröge
0d5326950a typefind: Remove redundant assignment
CID 1357158
2016-03-24 11:49:44 +02:00
Jan Schmidt
c9b6848885 multiqueue: Fix not-linked pad handling at EOS
Ensure that not-linked pads will drain out at EOS by
correctly detecting the EOS condition based on the EOS
pad flag (which indicates we actually pushed an EOS),
and make sure that not-linked pads are woken when doing
EOS processing on linked pads.

https://bugzilla.gnome.org/show_bug.cgi?id=763770
2016-03-18 21:21:44 +11:00
Romain Picard
20859af3f2 typefind: Allow caps query in "have-type" signal handlers
If an application calls gst_pad_query_caps from its "have-type" signal handler,
then the query fails because typefind->caps has not been set yet.

This patch sets typefind->caps in the object method handler, before the signal
handlers are called.

https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-15 18:58:06 +02:00
Sebastian Dröge
57bbd18471 typefind: Store caps on the pad before emitting have-type but send it downstream only in the default signal handler
https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-14 13:07:49 +02:00
Carlos Rafael Giani
46573a27da concat: Fix comment typo 2016-03-14 12:23:12 +02:00
Sebastian Dröge
a15fca1934 Revert "typefind: Store caps on the pad before emitting have-type but send it downstream only in the default signal handler"
This reverts commit 0835c3d656.

It causes deadlocks in decodebin, which currently would deadlock if the caps
are already on the pad in have-type and are forwarded while copying the sticky
events (while holding the decodebin lock)... as that might cause the next
element to expose pads, which then calls back into decodebin and takes the
decodebin lock.

This needs some more thoughts.
2016-03-12 12:57:47 +02:00
Sebastian Dröge
0835c3d656 typefind: Store caps on the pad before emitting have-type but send it downstream only in the default signal handler
https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-12 11:56:49 +02:00
Tim-Philipp Müller
cf0680017e elements: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=762778
2016-02-28 13:10:07 +00:00
Tim-Philipp Müller
94ec3f8a3e typefind: fix indentation 2016-02-27 16:39:50 +00:00
Sebastian Dröge
e953f20786 identity: Add a " " after pts: in the silent=false output 2016-02-25 14:12:00 +02:00
Edward Hervey
555df9d614 plugins: Check return values of gst_buffer_map()
They can fail for various reasons.

For non-fatal cases (such as the dump feature of identiy and fakesink),
we just silently skip it.

For other cases post an error message.

https://bugzilla.gnome.org/show_bug.cgi?id=728326
2016-02-23 17:30:45 +01:00
Sebastian Dröge
fd253ab1ab Revert "queue2: add overrun signal"
This reverts commit 8ae8b2723d.

It's not used anymore by anything and was considered a bad idea in general.
2016-02-16 19:11:59 +02:00
Alex Henrie
78ba7f9a8e typefindelement: Improve English grammar
https://bugzilla.gnome.org/show_bug.cgi?id=761273
2016-01-29 10:34:44 +01:00
Tim-Philipp Müller
469475f06b multiqueue: two small fixes for when an existing pad is requested
Unlock when returning NULL from gst_single_queue_new(), and don't
crash with debug logging enabled if NULL is returned.

Spotted by Steven Hoving.
2016-01-20 10:06:14 +00:00
Jan Schmidt
c1f4920859 queue2: Add use-tags-bitrate property
The use-tags-bitrate property makes queue2 look at
tag events in the stream and extract a bitrate for the
stream to use when calculating a duration for buffers
that don't have one explicitly set.

This lets queue2 sensibly buffer to a time threshold
for any bytestream for which the general bitrate is known.
2016-01-20 03:13:44 +11:00
Sebastian Dröge
485b15d8a9 output-selector: Make access to the active pad and last buffer thread-safe
Both can be modified from different threads at the same time.
2016-01-16 10:48:02 +01:00
Sebastian Dröge
0e132260a3 output-selector: Notify when the active-pad property is changing 2016-01-16 10:47:36 +01:00
HoonHee Lee
788938640d funnel: improve debug message
https://bugzilla.gnome.org/show_bug.cgi?id=745939
2016-01-08 19:28:43 +00:00
Tim-Philipp Müller
61e2f1eab1 queue2: avoid calculating fill levels multiple times
Macro expansion means we might calculate the fill level once
for the check and then possibly again for the return value.
2016-01-06 20:00:46 +00:00
Tim-Philipp Müller
8c6c0bef88 queue2: fix fill level arithmetic overflow with large values
Based on patch by: Aleksander Wabik <awabik@opera.com>

https://bugzilla.gnome.org/show_bug.cgi?id=755971
2016-01-06 20:00:46 +00:00
Sebastian Dröge
7e761798bd tee: Check if parsing the name template with sscanf() was successful
If not, go back to the automatic pad numbering.

CID 1195129
2015-12-14 13:06:57 +01:00
Sebastian Dröge
33ded76ab8 queue/multiqueue: Don't special-case CAPS events in the event handlers
For CAPS events we will never ever have a FALSE return value here, so just
remove the dead code instead of causing future confusion.
2015-12-14 11:20:43 +01:00
Sebastian Dröge
0636fe1391 Revert "queue: Illegal memory access of sink event"
This reverts commit 78614c505a.

The code it was fixing does not have any effect anyway and will be removed in
the next commit.
2015-12-14 11:20:22 +01:00
Vineeth TM
78614c505a queue: Illegal memory access of sink event
Once event is pushed to pad, then queue should not access the event.
This is leading to invalid read valgrind errors

https://bugzilla.gnome.org/show_bug.cgi?id=759430
2015-12-14 10:41:50 +01:00
Reynaldo H. Verdejo Pinochet
2a17bad7e8 downloadbuffer: drop unneeded macros for G_OS_WIN32 2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
b3a704de6a fdsrc: drop unneeded macros for G_OS_WIN32 2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
e71344010a fdsrc: enable large file support in Android
https://bugzilla.gnome.org/show_bug.cgi?id=758980
2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
806b48f6ba fdsink: enable large file support in Android
https://bugzilla.gnome.org/show_bug.cgi?id=758980
2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
85e7cfd811 queue2: fix some typos 2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
ea8bbd58df queue2: enable large file support on Android
https://bugzilla.gnome.org/show_bug.cgi?id=758980
2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
5261283dd9 downloadbuffer: fix some typos 2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
63727152e0 downloadbuffer: enable large file support on Android
https://bugzilla.gnome.org/show_bug.cgi?id=758980
2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
2a51ae6a4c sparsefile: drop bogus reference to file descriptor
+fix typo on return value comment
2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
6e563cf353 sparsefile: enable large file support on Android
https://bugzilla.gnome.org/show_bug.cgi?id=758980
2015-12-12 13:13:54 -08:00
Reynaldo H. Verdejo Pinochet
a7f8ad9c9a filesrc: enable large file support in Android
https://bugzilla.gnome.org/show_bug.cgi?id=758980
2015-12-09 14:15:26 -08:00
Reynaldo H. Verdejo Pinochet
add4526314 filesink: enable large file support on Android
https://bugzilla.gnome.org/show_bug.cgi?id=758980
2015-12-09 14:15:26 -08:00
Reynaldo H. Verdejo Pinochet
c0d2c1e793 filesink: indentation fixes 2015-12-09 14:15:26 -08:00
Edward Hervey
5f1764232f multiqueue: Don't use random segment.position from upstream
segment.position is meant for internal usage only, but the various
GST_EVENT_SEGMENT creationg/parsing functions won't clear that field.

Use the appropriate segment boundary as an initial value instead
2015-12-09 17:41:49 +01:00
Edward Hervey
906a50b995 multiqueue: Fix set/get property
Blame it on the rebasing :)
2015-12-02 16:28:58 +01:00
Edward Hervey
56d4650789 pad: Implement GstPadEventFullFunction
API: GstPadEventFullFunction

Returns a GstFlowReturn, allows asynchronous elements to properly
propagate flow returns

https://bugzilla.gnome.org/show_bug.cgi?id=757821
2015-12-02 16:04:03 +01:00
Edward Hervey
4d96e5b834 multiqueue: Use signed clock values for running time calculation
This improves the accuracy of queue levels and when to push buffers
for buffers falling outside of the segment

https://bugzilla.gnome.org/show_bug.cgi?id=757193
2015-12-02 16:03:20 +01:00