Add a property which explicitly maps splitmuxsink pads to the
muxer pads they should connect to, overriding the implicit logic
that tries to match pads but yields arbitrary names.
When running in async-finalize mode, request new pads from the muxer
using the same names as old pads, instead of letting the muxer assign
new ones based on the pad template name.
The output segment is only used in ONVIF mode.
The previous behaviour was to output a segment computed from
the Range response sent by the server.
In ONVIF mode, servers will start serving from the appropriate
synchronization point (keyframe), and the Range in response will
start at that position.
This means rtspsrc can now perform truly accurate seeks in that
mode, by clipping the output segment to the values requested in
the seek. The decoder will then discard out of segment buffers
and playback will start without artefacts at the exact requested
position, similar to the behaviour of a demuxer when an accurate
seek is requested.
Used to print:
|Run-time dependency vpx found: YES 1.7.0
|Message: libvpx provides VP8 encoder interface (vpx_codec_vp8_cx_algo)
|Message: libvpx provides VP8 decoder interface (vpx_codec_vp8_dx_algo)
|Message: libvpx provides VP9 encoder interface (vpx_codec_vp9_cx_algo)
|Message: libvpx provides VP9 decoder interface (vpx_codec_vp9_dx_algo)
|Dependency vpx found: YES (cached)
|Dependency vpx found: NO found '1.7.0' but need: '>=1.8.0'
|Run-time dependency vpx found: NO (tried pkgconfig and cmake)
We can check the version of the found dep in a way that
doesn't produce this confusing output.
In push mode (streaming), if the audio size is smaller than segment buffer size, it would be ignored.
This happens because when the plugin receives an EOS signal while a single audio chunk that is less than the segment buffer size is buffered, it does not
flush this chunk. The fix is to flush the data chunk when it receives an EOS signal and has a single (first) chunk buffered.
How to reproduce:
1. Run gst-launch with tcp source
```
gst-launch-1.0 tcpserversrc port=3000 ! wavparse ignore-length=0 ! audioconvert ! filesink location=bug.wav
```
2. Send a wav file with unspecified data chunk length (0). Attached a test file
```
cat test.wav | nc localhost 3000
```
3. Compare the length of the source file and output file
```
ls -l test.wav bug.wav
-rw-rw-r-- 1 amr amr 0 Aug 15 11:07 bug.wav
-rwxrwxr-x 1 amr amr 3564 Aug 15 11:06 test.wav
```
The expected length of the result of the gst-lauch pipeline should be the same as the test file minus the headers (44), which is ```3564 - 44 = 3520``` but the actual output length is ```0```
After the fix:
```
ls -l test.wav fix.wav
-rw-rw-r-- 1 amr amr 3520 Aug 15 11:09 fix.wav
-rwxrwxr-x 1 amr amr 3564 Aug 15 11:06 test.wav
```
If VP8 is not encoded with error resilience enabled then any packet loss
causes very bad artefacts when decoding and waiting for the next
keyframe instead improves user experience considerably.
Various audio formats require an audio lead-in to decode it properly.
Most parsers would take care of it, but when a container like matroska is
involved, the demuxer handles the seeking and without its own lead-in
handling would never even pass the lead-in data to the parser.
This commit provides an initial implementation of that for audio/mpeg,
audio/x-ac3 and audio/x-eac3 by calculating the worst case lead-in time
needed from known samplerate, potential lead-in frames need and the
maximum blocksize possible for the format (as we don't parse that out
exactly in matroskademux) and seeking that much earlier in case of
accurate seeks. This is especially important for NLE use-cases with GES.
If accurate seeking to a position that happens to have a video keyframe,
it'll go back to the previous keyframe than needed, but with typical
video files that's the best we can do anyway without falling back to
scanning the clusters, as typically only keyframes are indexed in
Cueing Data.
If the media doesn't have a CUE, then we bisect for the cluster to seek
to with the same modified time as well in case of accurate seeking,
ensuring sufficient lead-in. This code path is typically hit only with
(suboptimal) audio-only matroska files, e.g. when created with ffmpeg,
which doesn't add a CUE for audio-only mkv muxing.
RTP and RTCP packets can be muxed together on the same channel (see
RFC5761) and can arrive in the same buffer list.
The GStreamer rtpsession element support RFC5761, so add a test to cover
this case for buffer lists too.
Buffers with different timestamps (e.g. packets belonging to different
frames) can arrive together in the same buffer list,
Add a test to cover this case.
When a new source fails to pass the probation period (i.e. new packets
have non-consecutive sequence numbers), then no buffer shall be pushed
downstream. Add a test to validate this case.
Add a test to verify that stats about received packets are correct when
using buffer lists in the rtpsession receive path.
Split get_session_source_stats() in two to be able to get stats from
a GstRtpSession object directly.
The send path in rtpsession processes the buffer list along the way,
sharing info and stats between packets in the same list, because it
assumes that all packets in a buffer list are from the same frame.
However, in the receiving path packets can arrive in all sorts of
arrangements:
- different sources,
- different frames (different timestamps),
- different types (multiplexed RTP and RTCP, invalid RTP packets).
so a more general approach should be used to correctly support buffer
lists in the receive path.
It turns out that it's simpler and more robust to process buffers
individually inside the rtpsession element even if they come in a buffer
list, and then reassemble a new buffer list when pushing the buffers
downstream.
This avoids complicating the existing code to make all functions
buffer-list-aware with the risk of introducing regressions,
To support buffer lists in the receive path and reduce the "push
overhead" in the pipeline, a new private field named processed_list is
added to GstRtpSessionPrivate, it is set in the chain_list handler and
used in the process_rtp callback; this is to achieve the following:
- iterate over the incoming buffer list;
- process the packets one by one;
- add the valid ones to a new buffer list;
- push the new buffer list downstream.
The processed_list field is reset before pushing a buffer list to be on
the safe side in case a single buffer was to be pushed by upstream
at some later point.
NOTE:
The proposed modifications do not change the behavior of the send path.
The process_rtp callback is called in rtpsource.c by the push_rtp
callback (via source_push_rtp) only when the source is not internal.
So even though push_rtp is also called in the send path, it won't end up
using process_rtp in this case because the source would be internal in
the send path.
The reasoning from above may suggest a future refactoring: push_rtp
might be split to better differentiate the send and receive path.
In push mode (streaming), if the last audio payload chunk is less than the segment rate buffer size, it would be ignored since the plugin waits until it has at least segment rate bufer size of audio.
The fix is to introduce a flushing flag that indicates that no more audio will be available so that the plugin can recognize this condition and flush the data is has even if it is less
than the desired segment rate buffer size.
This is useful to support the ONVIF case: when is-live is set to
FALSE and onvif-rate-control is no, the client can control the
rate of delivery and arrange for the server to block and still
keep sending when unblocked, without requiring back and forth
PAUSE / PLAY requests. This enables, amongst other things, fast
frame stepping on the client side.
When is-live is FALSE, we don't use a manager at all. This case
was actually already pretty well handled by the current code. The
standard manager, rtpbin, is simply no longer needed in this case.
Applications can instantiate a downloadbuffer after rtspsrc if
needed.
Refactor the code for parsing and generating the Range, taking
advantage of existing API in GstRtspTimeRange.
Only use the TCP protocol in that mode, as per the specification.
Generate an accurate segment when in that mode, and signal to the
depayloader that it should not generate its own segment, through
the "onvif-mode" field in the caps, see
<https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/merge_requests/328>
for more information.
Translate trickmode seek flags to their ONVIF representation
Expose an onvif-rate-control property
Forwarding a single segment event from the pad that first gets
chained is incorrect: when that first event was sent by an element
such as x264enc, with its offset start, we end pushing out of segment
buffers for the other pad(s).
Instead, everytime the active pad changes, forward the appropriate
segment event.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1028
When it is not clear yet if a packet relative to a source should be
pushed, the packet is put into a queue, this happens in two cases:
- the source is still in probation;
- there is a large jump in seqnum, and it is not clear what
the cause is, future packets will help making a guess.
In either case stats about received packets are not updated at all; and
even if they were, when init_seq() is called it resets all receiver
stats, effectively loosing any possible stat about previously received
packets.
Fix this by taking into account the queued packets and update the stats
when calling init_seq().
Since commit c971d1a9a (rtpsource: refactor bitrate estimation,
2010-03-02) bytes_received filed in RTPSourceStats is set but then never
used again, expose it so that it can be used by user code to verify how
many bytes have been received.
According to RFC3550 lower-level headers should be considered for
bandwidth calculation.
See https://tools.ietf.org/html/rfc3550#section-6.2 paragraph 4:
Bandwidth calculations for control and data traffic include
lower-layer transport and network protocols (e.g., UDP and IP) since
that is what the resource reservation system would need to know.
Fix the source data to accommodate that.
Assume UDPv4 over IP for now, this is a simplification but it's good
enough for now.
While at it define a constant and use that instead of a magic number.
NOTE: this change basically reverts the logic of commit 529f443a6
(rtpsource: use payload size to estimate bitrate, 2010-03-02)
