Commit graph

44 commits

Author SHA1 Message Date
Víctor Manuel Jáquez Leal
fa77b2bf60 vaapiencode: h264: find best profile in those available
Instead to look for the best profile in the allowed profiles by
downstream, the encoder should look for the base profile in the
available profile in VA-API.

https://bugzilla.gnome.org/show_bug.cgi?id=794306
2018-03-30 20:44:25 +02:00
Víctor Manuel Jáquez Leal
25c2a0d353 Revert "vaapiencode: handle custom event GstVaapiEncoderRegionOfInterest"
This reverts commit 8f1b88dac0.

https://bugzilla.gnome.org/show_bug.cgi?id=768248
2018-02-27 17:51:02 -05:00
Víctor Manuel Jáquez Leal
9578fd1f7b vaapiencode: h264: remove spurious code
Coverity scan bug:

An unsigned value can never be negative, so this test will always
evaluate the same way.

As len is guint32, there is no need to check it if it is equal or
bigger than zero.
2017-08-08 17:38:51 +02:00
Víctor Manuel Jáquez Leal
e9fd571214 vaapiencode: h264: add plugin documentation
Comment how the profile is set and other parameters.
2017-07-13 16:43:34 +02:00
Hyunjun Ko
d018f64cbd vaapiencode: h264: set profile to src caps
So far vaapi encoder does not set profile to src caps. This patch makes it
setting profile to src caps, which is determined by itself.

In addition, if encoder chose different profile, which is not negotiated with
downstream, we should set compatible profile to make negotiation working.

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2017-07-03 18:36:29 +02:00
Víctor Manuel Jáquez Leal
39b36f7d14 vaapiencode: h264: verify if requested profile is supported
Check if the requested profile in source caps, is supported by the
VA driver. If it is not, an info log message is send saying that
another (compatible?) profile will be used.

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2017-07-03 15:33:20 +02:00
Víctor Manuel Jáquez Leal
322fe98936 vaapiencode: h264: improve set_config() vmethod
First check if downstream requests ANY caps. If so, byte-stream is
used and the profile will be choose by the encoder. If dowstream
requests EMPTY caps, the negotiation will fail.

Lately, byte-stream and profile are looked in the allowed caps.

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2017-07-03 15:33:20 +02:00
Víctor Manuel Jáquez Leal
b713af42a1 vaapiencode: h264: check for avc in set_config()
The check for avc stream format was done in the vaapi encoder's
vmethod get_caps(), but that is wrong since it has to be check
when encoder set_format().

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2017-07-03 15:33:20 +02:00
Hyunjun Ko
8f1b88dac0 vaapiencode: handle custom event GstVaapiEncoderRegionOfInterest
Handles new custom event GstVaapiEncoderRegionOfInterest
to enable/disable a ROI region.

Writes a way to use new event to document.

https://bugzilla.gnome.org/show_bug.cgi?id=768248

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-05-12 11:12:56 +02:00
Víctor Manuel Jáquez Leal
5ccadd6e9c vaapiencode: add get_profile() vmethod
This new virtual method, get_profile(), if implemented by specific
encoders, will return the VA profile potentially determined by the
source caps.

Also it is implemented by h264 and h265 encoders, which are the main
users of this vmethod.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00
Hyunjun Ko
e65d916f0d docs: h264/h265: put parser to the example pipeline
https://bugzilla.gnome.org/show_bug.cgi?id=778749
2017-03-14 16:54:39 +01:00
Víctor Manuel Jáquez Leal
1e7d89e7fe plugins: fix code style for errors 2016-11-03 12:54:23 +01:00
Víctor Manuel Jáquez Leal
0f938be7a4 plugins: fix code style for errors
https://bugzilla.gnome.org/show_bug.cgi?id=773497
2016-10-25 19:38:26 +02:00
Víctor Manuel Jáquez Leal
43dd4b7452 vaapiencode: h264, h265: rename codec name
So encoder and decoders have the same codec name.

https://bugzilla.gnome.org/show_bug.cgi?id=773497
2016-10-25 19:24:34 +02:00
Vineeth TM
57313f3f70 vaapi: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763083

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-09-23 12:33:58 +02:00
Víctor Manuel Jáquez Leal
d4f00383ed unify caps template for VAAPI encoders and decoders
There is no difference in VAAPI surface caps between encoders and decoders.
Thus, the patch makes a simplification by removing encoders specific caps and
shares the same definition of VAAPI surfaces caps for all the elements.
2016-03-30 16:55:26 +02:00
Víctor Manuel Jáquez Leal
77ddde41d9 rename encoders to vaapi{codec}enc
Trying to comply with GStreamer's element names, this patch renames the
encoders using the name format vaapi{codec}enc.

In this way, the plugin documentation is linked correctly.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-03 20:23:31 +01:00
Víctor Manuel Jáquez Leal
9b8fb25b8c docs: update plugin documentation
Update all the documentation of elements of the vaapi plugin.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-03 20:03:47 +01:00
Víctor Manuel Jáquez Leal
66f05af288 refactor vaapi caps strings for pad templates
Refactor the main vaapi caps strings into three macros:
GST_VAAPI_MAKE_SURFACE_CAPS, GST_VAAPI_MAKE_ENC_SURFACE_CAPS and
GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS.

Those are in gstvaapipluginutil.h so all the elements could use them, instead
of re-declaring them every time.

No functional changes.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2015-08-05 14:26:37 +02:00
Víctor Manuel Jáquez Leal
8b36e25f47 Removal of gstreamer-1.0 support
The support for GStreamer 1.0 has been obsoleted in 0.5.10 release.
GStreamer 1.2 is the a minimal requirement for building the gstreamer-vaapi.

This patch removes all the pre-processor conditional code compilation guarded
for gstreamer-1.0.

Thus, all the video converters were removed too.

https://bugzilla.gnome.org/show_bug.cgi?id=745728

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-04-03 17:09:08 +03:00
Víctor Manuel Jáquez Leal
c561b8da8a update and move gstcompat.h
The purpose of gstcompat.h is to couple the API differences among
gstreamer-1.0 and gstreamer-0.10. Since gstreamer-0.10 is obsolete, the code
in this compatibility layer shall be removed.

Nevertheless, the gstcompat.h header should be kept, if new incompatibilites
appear in the future, but it shall live in gst/vaapi, not in gst-libs.

This patch removes the crumbs defined gstcompat.h and moves it to gst/vaapi.
In order to avoid layer violations, gstcompat.h includes sysdeps.h and all
the includes in gst/vaapi of sysdeps.h are replaced with gstcompat.h

https://bugzilla.gnome.org/show_bug.cgi?id=745728

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-04-03 17:08:30 +03:00
Víctor Manuel Jáquez Leal
d256f1d283 Removal of gstreamer-0.10 support
This patch removes all the pre-processor conditional code compilation guarded
for gstreamer-0.10.

https://bugzilla.gnome.org/show_bug.cgi?id=745728
https://bugzilla.gnome.org/show_bug.cgi?id=732666

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2015-04-03 16:55:27 +03:00
Sreerenj Balachandran
7f3795c9fb encode: Attach the codec-data to out caps only based on negotiated caps
Attach the codec_data to out_caps only if downstream needed.
For eg: h264 encoder doesn't need to stuff codec_data to the
src caps if the negotiated caps has a stream format of byte-stream.

https://bugzilla.gnome.org/show_bug.cgi?id=734902
2014-10-29 15:46:12 +02:00
Li Xiaowei
7bdf3fa177 encoder: h264: add initial support for H.264 Stereo High profile.
Add initial support for Subset SPS, Prefix NAL and Slice Extension NAL
for non-base-view streams encoding, and the usual SPS, PPS and Slice
NALs for base-view encoding.

The H.264 Stereo High profile encoding mode will be turned on when the
"num-views" parameter is set to 2. The source (raw) YUV frames will be
considered as Left/Right view, alternatively.

Each of the two views has its own frames reordering pool and reference
frames list management system. Inter-view references are not supported
yet, so the views are encoded independently from each other.

Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
[limited to Stereo High profile per the definition of MAX_NUM_VIEWS]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-06-02 18:25:13 +02:00
Gwenole Beauchesne
6bf3c1863c legal: update copyright notice dates. 2014-01-22 19:02:35 +01:00
Gwenole Beauchesne
1c95903b98 legal: add per-file authorship information. 2014-01-22 18:49:20 +01:00
Gwenole Beauchesne
bdf91aa765 encoder: h264: allow target decoder constraints.
Allow user to precise the largest profile to use for encoding due
to target decoder constraints. For instance, if CABAC entropy coding
mode is requested by "constrained-baseline" profile only is desired,
then an error is returned during codec configuration.

Also make sure that the suitable profile we derived actually matches
what the HW can cope with.

https://bugzilla.gnome.org/show_bug.cgi?id=719694
2014-01-13 17:31:55 +01:00
Gwenole Beauchesne
45732dcc83 encoder: h264: clean-ups.
Various clean-ups to improve consistency and readability: rename some
variables, drop unused macro definitions, drop initialization of vars
that are zero-initialized from the base class, drop un-necessary casts.
2014-01-13 17:31:55 +01:00
Gwenole Beauchesne
ea7c1d87c5 vaapiencode: use more GstVaapiPluginBase facilities.
Avoid duplication of pad references or query functions since they are
provided through the GstVaapiPluginBase object.
2014-01-13 17:31:55 +01:00
Gwenole Beauchesne
449ac54348 vaapiencode: fix negotiation process of output caps.
The specified caps in gst_video_encoder_set_output_state() function
arguments should not contain any resolution, pixel-aspect-ratio,
framerate, codec-data et al. Those rather should be set through the
returned GstVideoCodecState. This means that output caps creation
could be delayed until before gst_video_encoder_finish_frame() is
called.

This greatly simplifies the GstVideoEncoder::set_format() callback
by the way.
2014-01-13 17:31:55 +01:00
Gwenole Beauchesne
85ce893faa vaapiencode: rename a few member functions.
Rename a few member functions to make them more consistent:
- alloc_encoder(): now reduced to allocate the encoder object only;
- alloc_buffer(): allocate buffer from srcpad, and copy bitstream.
2014-01-13 17:31:55 +01:00
Gwenole Beauchesne
a43d06dcf5 vaapiencode: update for new properties API.
Update MPEG-2 and H.264 encode elements to cope with the new core
libgstvaapi properties API. i.e. all configurable properties are now
directly handled at the GstVaapiEncoder level.

Besides, this also makes sure to not use or modify the GstVaapiEncoder
private definitions directly. Private data need to remain private.

https://bugzilla.gnome.org/show_bug.cgi?id=719529
2014-01-13 17:31:55 +01:00
Gwenole Beauchesne
70b3600f11 encoder: add bitrate API.
Add gst_vaapi_encoder_set_bitrate() interface to allow the user control
the bitrate for encoding. Currently, changing this parameter is only
valid before the first frame is encoded. Should the value be modified
afterwards, then GST_VAAPI_ENCODER_STATUS_ERROR_OPERATION_FAILED is
returned.

https://bugzilla.gnome.org/show_bug.cgi?id=719529
2014-01-13 17:31:54 +01:00
Gwenole Beauchesne
a24c52e4d0 encoder: add rate control API.
Add gst_vaapi_encoder_set_rate_control() interface to request a new
rate control mode for encoding. Changing the rate control mode is
only valid prior to encoding the very first frame. Afterwards, an
error ("operation-failed") is issued.

https://bugzilla.gnome.org/show_bug.cgi?id=719529
2014-01-13 17:31:54 +01:00
Gwenole Beauchesne
076d75aeb8 vaapiencode: fix indentation. 2014-01-13 17:31:54 +01:00
Gwenole Beauchesne
9ab6037847 plugins: use G_PARAM_STATIC_STRINGS.
This avoids a few string copies during initialization.
2013-11-28 17:35:44 +01:00
Gwenole Beauchesne
8116d8a50e vaapiencode: additional clean-ups.
Constify pointers wherever possible. Drop unused variables, and use
consistent variable names. Fix gst_vaapiencode_h264_allocate_buffer()
to correctly report errors, especially when in-place conversion from
bytestream to avcC format failed.
2013-11-28 15:17:42 +01:00
Gwenole Beauchesne
d759fe34e6 vaapiencode: move common properties to base class.
Move "rate-control" mode and "bitrate" properties to the GstVaapiEncode
base class. The actual range of supported rate control modes is currently
implemented as a plug-in element hook. This ought to be determined from
the GstVaapiEncoder object instead, i.e. from libgstvaapi.
2013-11-28 14:05:33 +01:00
Gwenole Beauchesne
1a4b3c3b22 vaapiencode: fix plugin description and debug name.
Align the plug-in debug category to its actual name. i.e. enable debug
logs through vaapiencode_<CODEC> where <CODEC> is mpeg2, h264, etc. Fix
the plug-in element description to make it more consistent with other
VA-API plug-ins.
2013-11-28 10:54:36 +01:00
Gwenole Beauchesne
bc020c05f9 vaapiencode: add initial support for GStreamer 0.10. 2013-11-27 17:23:56 +01:00
Gwenole Beauchesne
e01d48feba vaapiencode: minor clean-ups.
Add a GST_VAAPIENCODE_CAST() helper to avoid run-time checks against
the GObject type system. We are guaranteed to only deal with the same
plug-in element object.
2013-11-26 17:08:31 +01:00
Gwenole Beauchesne
84af151796 vaapiencode: fix support for raw YUV sink buffers.
Allow vaapiencode plug-in elements to encode from raw YUV buffers.
The most efficient way to do so is to let the vaapiencode elements
allocate a buffer pool, and subsequently buffers from it. This means
that upstream elements are expected to honour downstream pools.

If upstream elements insist on providing their own allocated buffers
to the vaapiencode elements, then it possibly would be more efficient
to insert a vaapipostproc element before the vaapiencode element.
This is because vaapipostproc currently has better support than other
elements for "foreign" raw YUV buffers.
2013-11-26 15:55:09 +01:00
Wind Yuan
3e96f10cf2 vaapiencode: initial port to GStreamer 1.2.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2013-11-26 14:32:21 +01:00
Wind Yuan
f1c33feef9 plugins: add h264 encoder element.
Add GstVaapiEncodeH264 element object. The actual plug-in element
is called "vaapiencode_h264".

Valid properties:
- rate-control: rate control mode (default: none)
- bitrate: desired bitrate in kbps (default: auto-calculated)
- key-period: maximal distance between two key frames (default: 30)
- num-slices: number of slices per frame (default: 1)
- max-bframes: number of B-frames between I and P (default: 0)
- min-qp: minimal quantizer (default: 1)
- init-qp: initial quantizer (default: 26)

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2013-11-24 16:52:05 +01:00