If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
filter the error message and don't forward it as there might be a
following candidate decoder that can be used.
If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
store the latency message and handle it after decoder is accepted.
This is to avoid the selection lock failure if decodebin3 needs to
handle latency message for candidate decoders when sending sticky event.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
Send sticky events to the new created decoder after it switches
to PAUSED state. It it fails, just skip this decoder and try the
next one until finding one that works. Otherwise remove this
failing stream after trying all decoders and no one can work.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
Generating the source element is done when urisourcebin is doing the READY to
PAUSED state change, so it is reasonable to set the new source element to that
state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Finally it makes more sense to have an element in READY when attempting to query
information from it (such as SCHEDULING queries or probing live-ness).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3856>
self->eos was never reset after streamsynchronizer has sent EOS
(except on explicit flush or switching back to PAUSED).
As a result, synchronization was broken if new streams were pushed later
as gst_stream_synchronizer_wait() does not wait if self->eos is set.
Fix this by reseting self->eos on STREAM_START as that means a new
stream is being sent upstream and so a new EOS will follow later on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4749>
While decodebin3 could handle changes in inputs (ex: changing codecs), there was
still one limitation which was when changing between sources which had
non-intersecting stream types (ex: switching from a video-only source to a
audio-only source). While the decoder *could* change to the proper codec ... it
would carry on using a `DecodebinOutputStream` associated to that stream
type (and therefore with pads with the wrong name).
In order to handle this:
* We notify the `MultiQueueSlot` of the change in `GstStreamType` if it already
had an associated inputstream (ex: the one associated with the static sink
pad)
* We detect such changes on the output of multiqueue as soon as
possible (i.e. when we get the GST_EVENT_STREAM_START for the new stream type)
by discarding the associated output.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1669
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4703>
When reconfigure_output_stream entry missing decoder path,
requested_selection should been update with what is really
active/selected immdiately with SELECTION_LOCK hold. So
use an optional message return from reconfigure_output_stream
and post it after release SELECTION_LOCK. This can make sure
other thread call to check_slot_reconfiguration will got
a correct requested_selection.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4599>
decodebin3 will do its best to figure out whether a parsebin is required to
process the incoming stream.
The problem is that for push-based stream it could happen that the stream would
not provide any caps, resulting in nothing being linked internally.
Furthermore, there is the possibility that a stream *with* caps would not be
using a TIME segment, which is required for multiqueue to properly work.
In order to fix those two issues, we force the usage of parsebin on push-based
streams:
* When the pad is linked, if upstream can't provide any caps
* When we get a non-TIME segment
Fixes#2521
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4492>
This is a follow-up of the previous commit that enabled support for redirection.
The problem is that the urisourcebin that emitted the error redirection never
produced any pads, and therefore was never linked to decodebin3. This resulted
in the code waiting for that (output) item to finally switch over ... which will
never happen.
The fix is done by removing it early if it was never connected to decodebin3.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4252>
The goal of parsebin is to figure out which elements to link together in order
to provide elementary streams given any random input.
The problem is that deciding whether a given stream should still have more
elements plugged in or not was dependent on ... the presence of compatible
decoders (sic).
Instead of that, if we can't plug anymore elements on a given stream *and* it is
detected as being an elementary stream, expose it.
Fixes#2118
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4231>
If sticky events are present on parsebin source pads, we propagate them to the
multiqueue source pads. Those will be propagated on the new urisourcebin source
pads like in the other code paths.
This ensures that STREAM_START event are present on new source pads. If CAPS
event are also present (not guaranteed), they will also be available.
Fixes#2384
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4203>
Generating the source element is done when uridecodebin is doing the
READY to PAUSED state change, so it is reasonable to set the new source
element to that state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3857>
The goal of the "global" group-id is to fix new inputs that do not come from the
same "source" as others. In order to ensure all "current" streams have the same
group-id we distribute the first valid group-id to all streams.
This commit fixes two issues with that:
* When inputs are unlinked they weren't always properly resetted (it would only
work if parsebin is used, which is no longer the default in
uridecodebin3/playbin3).
* When computing the global group-id, take into account unset
group-id (i.e. GST_GROUP_ID_INVALID).
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1698
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3712>
The number of expected pads was:
* Defaulting to 1
* Or being overriden by GST_MESSAGE_STREAMS_SELECTED
This fails if upstream isn't a selectable source and has multiple streams, and
would therefore cause failures with multi-stream gapless playback
Fixes#1672
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
It is quite possible to have the blocking probe called from different streaming
threads when all expected pads are present.
* Notify all waiters by using g_cond_broadcast instead of g_cond_signal
* Properly remove the probe after waiting
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
Using the "GstBin" flags to check if an adaptive demuxer is streams-aware isn't
a good idea since it prevents using elements which aren't bins.
Instead we see if a collection was posted by the demuxer by the time a pad is
added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3601>
Make sure that group-id of a given play item are made consistent from the
start (sources) and all the way through the output.
This ensures that we can reliably detect that we have switched to the next play
item on the output of decodebin3 (and we can therefore properly free/release it)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
When shutting down, we want to remove the urisourcebin blocking probes ... but
we also want to propagate a GST_FLOW_FLUSHING upstream (and not
GST_FLOW_NOT_LINKED) to make the upstream task gracefully stop instead of
posting an error message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
