Commit graph

149 commits

Author SHA1 Message Date
Mark Nauwelaerts
1911812572 flacdec: improve upstream peer duration querying
... to avoid accepting unhandled duration query result.
2012-01-20 17:10:19 +01:00
Tim-Philipp Müller
b8b8454bcb Suppress deprecation warnings in selected files, for g_static_rec_mutex_* mostly
GStaticRecMutex is part of our API/ABI, not much we can do here
in 0.10 for most of these.
2011-12-12 09:46:27 +00:00
Vincent Penquerc'h
c0e101e93f various: fix pad template leaks
https://bugzilla.gnome.org/show_bug.cgi?id=662664
2011-11-28 13:30:27 +00:00
Vincent Penquerc'h
5a73374f2c flacdec: fix off by one between granpos and last_stop 2011-11-07 12:38:10 +00:00
Monty Montgomery
799c8e3d04 flacdec: Correct sample number rounding resulting in timestamp jitter
flacdec converts the src timestamp to a sample number, uses that internally, then reconverts the sample number to a timestamp for the output buffer.  Unfortunately, sample numbers can't be represented in an integer number of nanoseconds, and the conversion process was truncating rather than rounding, resulting in sample numbers and output timestamps that were often off by a full sample.

This corrects the time->sample convesion
2011-08-23 10:09:41 +02:00
Vincent Penquerc'h
3e0134f51f flacdec: avoid timestamp/offset tracking going out of sync
The libFLAC API is callback based, and we must only call it to
output data when we know we have enough input data. For this
reason, a single processing step is done when receiving a buffer.
However, if there were metadata buffers still pending, a step
intended for the first audio frame might end up writing that
leftover metadata. Since a single step is done per buffer, this
will cause every buffer to be written one step late.

This would add some latency (a bufferfull's worth), possibly
lose a buffer when seeking or the like, and also cause timestamp
and offset to be applied to the wrong buffer, as updates to
the "current" segment last_stop (from incoming buffer timestamp)
will be applied to an output buffer originating from the previous
incoming buffer.

This fixes the issue by ensuring that, upon receiving the first
audio frame, processing is done till all metadata is processed,
so the next "single step" done will be for the audio frame. After
this, we should keep to 1 input buffer -> 1 output buffer and so
avoid getting out of sync.

https://bugzilla.gnome.org/show_bug.cgi?id=650960
2011-08-17 13:40:59 +01:00
Vincent Penquerc'h
e09eb95a5f flacdec: bail on reserved value
Now that we look at the right bits, we can test against the reserved
value as we do for other fields.

https://bugzilla.gnome.org/show_bug.cgi?id=650960
2011-08-17 00:02:38 +01:00
Vincent Penquerc'h
64beef4610 flacdec: fix bit twiddling
Right shifting a 8 bit value by 8 bits is twice too much
to get the high 4 bits.

https://bugzilla.gnome.org/show_bug.cgi?id=650960
2011-08-17 00:01:37 +01:00
Vincent Penquerc'h
1549aaba27 flacdec: warn if we see a variable block size where unsupported
https://bugzilla.gnome.org/show_bug.cgi?id=650960
2011-08-17 00:01:07 +01:00
Tim-Philipp Müller
900b2fb63d flacdec: also try upstream first for duration query in DEFAULT format
https://bugzilla.gnome.org/show_bug.cgi?id=650785
2011-05-23 13:25:44 +01:00
Sebastian Dröge
d4b9cbc1ae flacdec: Send EOS when seeking after the end of file instead of failing
Fixes bug #649780.
2011-05-14 11:52:13 +02:00
Tim-Philipp Müller
c365fbddba flacdec: fix issues with large metadata blocks when streaming unframed flac
Parse metadata blocks when handling unparsed flac in push mode. This
works around a bunch of issues with the flac decoder when handling
metadata blocks that are larger than the max. flac framesize, which
coverart blocks often are. We need to have all the data for these
blocks available when we pass data to libflac.

http://gstreamer-devel.966125.n4.nabble.com/Flac-files-that-will-playback-but-not-stream-td3338198.html#a3395276

https://bugzilla.gnome.org/show_bug.cgi?id=566769
2011-03-28 23:46:47 +01:00
Sebastian Dröge
2f7c0d21b6 flacenc/dec: Don't use GST_FLOW_IS_FATAL()
And properly handle UNEXPECTED and WRONG_STATE.
2010-09-04 14:52:10 +02:00
Mark Nauwelaerts
eb4afca554 flacdec: fix event leak 2010-07-22 16:25:38 +02:00
Sebastian Dröge
e9b267ae02 flacdec: Improve debugging and add some FIXMEs 2010-03-26 14:55:53 +01:00
Sebastian Dröge
b139cad3aa flacdec: Sample rate markers 0x01, 0x02 and 0x03 are valid
They are for 88.2kHz, 176.4kHz and 192kHz.
2010-03-26 14:42:06 +01:00
Sebastian Dröge
2e42e82037 flacdec: Take samplerate, width and number of channels from the STREAMINFO
...and update it from the frame headers if it should change for some reason.

This allows playback of files with odd sample rates.
2010-03-26 14:16:39 +01:00
Benjamin Otte
1055aaa9cb Add -Wredundant-decls warning flag
Also fix compile issues
2010-03-17 19:35:10 +01:00
Tim-Philipp Müller
de56a874ae flacdec: don't send second newsegment event in framed mode, fixes long playback delay
Don't send another newsegment event if the upstream muxer/parser has already
sent one (otherwise the sink will wait for $duration before starting playback).
Fixes long delay until playback starts with flac-in-ogg files.

Fixes #610959.
2010-03-08 17:10:31 +00:00
Sebastian Dröge
27b203b030 flacdec: Only flush the FLAC decoder if it wasn't created right before
If the FLAC decoder is flushed, its state will be set to frame-sync mode,
which will sync to the next *audio* frame and makes it ignore all headers.
This prevented tags and everything else to show up when using flacdec
in push mode.

Fixes bug #608843.
2010-02-12 10:54:18 +01:00
Mark Nauwelaerts
a76af918d0 flacdec: really use upstream timestamp if there is one
See/fixes #603471.
2010-01-06 14:14:28 +01:00
Mark Nauwelaerts
636738d9f2 flacdec: use a single decoder field for both push and pull mode 2009-12-23 19:39:56 +01:00
Mark Nauwelaerts
d6633d6edc flacdec: fix possible hanging in pull mode seeking
A seek in multi-sink pipeline typically leads to several seek events in a row,
which could lead to sending several newsegments in a row without intermediate
flushing.  These would then accumulate, distort rendering times and as such
lead to 'hanging'.
2009-12-23 19:39:54 +01:00
Stefan Kost
f1fe1f52fd flac: apparently on some platforms a FLAC__uint64!=guint64 2009-10-09 14:37:32 +03:00
Stefan Kost
f41d7e7bd5 build: don't cast, but use the right format specified instead
This correct some of the previous macos fixes.
2009-10-09 13:54:24 +03:00
Josep Torra
133ebe76a3 flac: fix warnings on macosx 2009-10-09 12:25:19 +02:00
Tim-Philipp Müller
cee10cb439 flacdec: send newsegment event when operating push-based and unframed
For some reason flac doesn't call our metadata callback when we operate
in push mode with unframed input, but that's where we set up the
newsegment event (since that's where we'd get the duration from the
stream info header), so we didn't send a newsegment event at all in this
case. Hack around this by storing a generic newsegment event for now
which will be used if we don't replace it with a better one that
includes the duration.
2009-08-01 17:07:42 +01:00
Tim-Philipp Müller
3cf8790906 flacdec: small cleanups
Remove some callback indirections which are no longer needed because
there's only one decoder object type now. Also remove unused variable.
2009-08-01 16:48:36 +01:00
Tim-Philipp Müller
e8badc0686 flacdec: use gst_adapter_copy() to avoid unnecessary buffer merges
gst_adapter_peek() will merge buffers as needed, which we can avoid
here since we're doing a memcpy anyway and then flush the copied
data from the adapter right away.
2009-08-01 15:22:49 +01:00
Tim-Philipp Müller
33b686974e flacdec: repair some broken indenting 2009-08-01 12:30:32 +01:00
Sebastian Dröge
169283dfc2 flacdec: Implement SEEKING query
Fixes bug #589423.
2009-07-23 12:07:33 +02:00
Tim-Philipp Müller
375976c847 flacdec: fix intermittent FLAC__STREAM_DECODER_ABORTED errors when seeking
When seeking in a local flac file (ie. operating pull-based), the decoder
would often just error out after the loop function sees a DECODER_ABORTED
status. This, however, is the read callback's way of telling our loop
function that pull_range failed and streaming should stop, in this case
because of the flush-start event that the seek handler pushed upstream
from the seeking thread. Handle this slightly better by storing the last
flow return from pull_range, so the loop function can evaluate it properly
when it encounters a DECODER_ABORTED and take the right action.

Fixes #578612.
2009-07-21 19:58:04 +01:00
Edward Hervey
f2ba1229ba flacdec: Don't send empty string tags 2009-07-01 08:40:40 +02:00
Tim-Philipp Müller
8accf2704b flacdec: fix buffer leak
gst_buffer_replace() will take its own ref, so we still have
to unref the buffer if we don't need it any longer.
2009-05-13 09:18:07 +01:00
Edward Hervey
e8cbbd22f8 flacdec: Actually output the pending buffer.. and not a blank one.
It was previously sending the bogus buffer which was returned from
the bufferalloc (required for reverse negotiation apparently) instead
of the pending buffer.
2009-05-08 16:40:57 +02:00
Jan Schmidt
c41d3d87fa flac: Make buffers created during seek act like normal buffers.
Store the offset and caps when allocating a buffer during seeking, and then
allocate a new buffer with buffer_alloc before we push it out. This ensures
that in all respects the first buffer decoded during seeking behaves like
all other buffers, including allowing downstream re-negotiation.
2009-05-06 14:24:20 +01:00
Thomas Vander Stichele
71acf2e900 flacdec: don't use pad_alloc when decoding while seeking. Fixes #579422 2009-05-06 15:28:46 +02:00
Thomas Vander Stichele
8009fcf547 add pending_samples so that we only update segment's last stop after really sending the samples 2009-04-04 15:14:32 +02:00
Thomas Vander Stichele
fb4953a68d add debugging 2009-04-04 15:14:31 +02:00
Thomas Vander Stichele
5e19fc1058 clipping should also work if it's done on the first buffer starting at 0 2009-04-04 15:14:31 +02:00
Tim-Philipp Müller
11a8aa91b8 flac: require a 'newer' flac and remove support for the legacy flac API 2009-03-27 21:27:30 +00:00
Laszlo Pandy
73fac6e4ea Don't call FLAC__ methods before it's initialized. Fixes #516031
In the event handler, gst_flac_dec_sink_event(), two functions are called on
the FLAC stream without checking if it has been initialized:
FLAC__stream_decoder_flush()
FLAC__stream_decoder_process_until_end_of_stream()

Both these FLAC__*() functions modify the internal state of the FLAC stream.
Later, when the buffers start flowing, gst_flac_dec_chain() tries to initialize
the stream. the FLAC__stream_decoder_init_stream() call will fail because the
previous calls to FLAC__*() changed the stream state so it is no longer in the
initialized state.
2009-03-12 16:10:25 +01:00
Wim Taymans
8f8e035cd5 flacdec: don't lose the first buffer after a seek
The flacdec API calls the write callback when performing a seek. We cannot yet
push out a buffer at that time so we must keep it and push it out later.
Flush out the upstream part of the pipeline when doing a seek.
Fixes #574275.
2009-03-09 17:14:12 +01:00
Thomas Vander Stichele
13221762d0 Add/clarify/fix some logging. 2009-03-02 08:41:15 +01:00
Thomas Vander Stichele
a7902054bd respect DEFAULT segment by clipping the last buffer to be sent 2009-02-21 12:47:00 +01:00
Michael Smith
db0b8755e0 flacdec: if we aborted reading, don't do into an infinite loop.
If our read callback ran out of data, so had to abort reading, we return
GST_FLOW_ERROR instead of going into an infinite loop.
2009-02-05 15:53:04 -08:00
Thomas Vander Stichele
b312bc6931 debug on the object 2009-02-05 20:02:01 +01:00
Stefan Kost
9cf73bdd8f Update and add documentation for plugins with deps (ext).
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered. Fix warnings that gtk-doc points out.
2009-01-28 18:05:09 +02:00
Jan Schmidt
1e7e381a8d Fix typo and small flaw in flac decoder 2009-01-22 14:33:04 +00:00
Wim Taymans
43fb36545b Whitespace fixes and some improved debug lines. 2009-01-21 13:25:06 +01:00