Commit graph

2252 commits

Author SHA1 Message Date
Sebastian Dröge
1d4cf74e0b theoraparse: Fix event handling
Send CAPS event before any SEGMENT events or any other events
that must come in order after the CAPS event.
2013-11-29 13:33:45 +01:00
Tim-Philipp Müller
b1ff48c1a1 docs: remove old 0.10 Since markers
They're just confusing.
2013-11-16 16:10:07 +00:00
Stefan Sauer
2055f2b7de oggdemux: fix copy'n'paste in comment 2013-10-15 09:53:30 +02:00
Thibault Saunier
508245dfa6 theoraenc: Do nothing when flushing the encoder when no caps were set
In case we receive a flush event before having our caps set, we will
end up trying to create a theora encoder even though we are not ready.
Avoid that situation making sure we are initialized before accepting to
be flushed.

https://bugzilla.gnome.org/show_bug.cgi?id=709858
2013-10-14 17:49:59 -03:00
Takashi Iwai
76d807893c alsa: Add channel map API support
The initial support for the new ALSA chmap API.
Just translate the current chmap to GstAudioChannelPosition during the
setup.  No function to specify the channel map manually yet, so still
impossible to assign any non-standard positions or to configure in a
different order even if the hardware allows.

https://bugzilla.gnome.org/show_bug.cgi?id=709755
2013-10-09 19:05:53 +02:00
Thiago Santos
1618084bc8 oggdemux: check for full eos after a pad goes eos in push mode
After a pad is on EOS, verify if all pads are EOS and return
upstream, avoiding keeping the buffer flow without having more
data to push
2013-09-10 12:14:47 -03:00
Thiago Santos
7ecd5b1108 oggdemux: properly handle stop position at seeks in push mode
Store the seek stop and seqnum and properly restore them when
receiving the corresponding Segment from upstream. Also fixes
seqnum for converted seek events.
2013-09-10 12:14:47 -03:00
Tim-Philipp Müller
80fca3b4e3 vorbisenc: remove unused variables 2013-08-26 11:44:06 +01:00
Alessandro Decina
48b8e61334 vorbisenc: implement flushing 2013-08-26 08:09:11 +02:00
Sebastian Dröge
02c6766c8a oggdemux: Update segment.base with the chain's start time too
Fixes playback of chained ogg files.

https://bugzilla.gnome.org/show_bug.cgi?id=706569
2013-08-22 17:33:45 +02:00
Sebastian Dröge
5bd27953b4 theora: Use new video codec base classes' flush vfunc 2013-08-15 13:26:39 +02:00
Sjoerd Simons
76647f2710 oggdemux: Prevent seeks when _SCHEDULING_FLAG_SEQUENTIAL is set
Don't go into pull mode when the upstream scheduling flags indicate
seeks should be avoided by setting GST_SCHEDULING_FLAG_SEQUENTIAL.

https://bugzilla.gnome.org/show_bug.cgi?id=704929
2013-07-29 16:04:07 +02:00
Sebastian Dröge
246e1781c7 oggdemux: Don't swap start/stop for negative rates in the SEGMENT query 2013-07-29 12:11:38 +02:00
Sebastian Dröge
31763d3c20 oggdemux: Implement SEGMENT query 2013-07-29 10:46:01 +02:00
Edward Hervey
9dd0e6cccc ext/gst: Ensure default query/event handlers are used
And in some cases, just remove our implementation that does nothing
2013-07-26 16:08:35 +02:00
Sebastian Dröge
239b623a9c theoraenc: Clean up handling of reset/flushing/start/stop 2013-07-25 13:31:07 +02:00
Sebastian Dröge
775aa4100b theoradec: Clean up handling of reset/flushing/start/stop 2013-07-25 13:29:22 +02:00
Sebastian Dröge
fc79a688f5 ogg: Add support for group-id in the stream-start event 2013-07-22 15:24:29 +02:00
Mathieu Duponchelle
905fe0f4ca oggdemux: Make bisecting fully accurate
When bisecting after an earliest time has been found, we need
to only consider the stream for which the earliest time was found.

Before, the following scenario could be and was encountered:

a) Find the earliest time for stream X
b) bisect and find a page which granuletime is indeed < target, but
   contains another stream.
c) decide to seek at the wrong offset, sometimes inferior to
   the real one, in which case the error was undected or
d) the offset was superior, and thus the actual target keyframe was
   not processed, and packets were skipped waiting
   for a granulepos.

https://bugzilla.gnome.org/show_bug.cgi?id=700537
2013-07-15 10:34:00 +02:00
Mathieu Duponchelle
affd9f37aa Revert "oggdemux: fix seeking with negative rate with skeleton"
This reverts commit b41cd04289.
2013-07-15 10:31:08 +02:00
Sebastian Dröge
748cbbd76e ogg: The Daala headers are little endian, not big endian 2013-06-23 12:07:41 +02:00
Sebastian Dröge
3f9872abaa ogg: Add Daala support 2013-06-23 11:28:40 +02:00
Sebastian Dröge
4180581ce9 alsasrc: Dump some more debug output about the device configuration 2013-05-29 16:41:14 +02:00
Sebastian Dröge
639e2d4346 alsasink: Update internal buffer/period times with the values that were configured on the device 2013-05-29 16:41:06 +02:00
Sebastian Dröge
e39fa41d74 theoradec: Require caps to be set before data flow happens 2013-05-27 13:04:25 +02:00
Alexander Schrab
a049b102da alsasrc: Make using driver timestamps possible
https://bugzilla.gnome.org/show_bug.cgi?id=699744
2013-05-20 11:25:17 +02:00
Sebastian Dröge
0bc25f0325 alsa: Dump min/max period time and buffer time in alsasrc too 2013-05-20 11:23:06 +02:00
Sebastian Dröge
36470a4aa8 libvisual: Update visualizer baseclass from gst-plugins-bad 2013-05-15 11:04:35 +02:00
Sebastian Dröge
027654e71e vorbisparse: Fix event handling
Internal state should only be reset on FLUSH_STOP, not FLUSH_START.

Also forward pre-caps events immediately and don't queue them.
2013-05-10 11:32:36 +02:00
Sebastian Dröge
1d20c0f4bb oggmux: Make sure to always set caps on the srcpad and always send a segment event
Even if the srcpad is not linked at this point, it might be linked as result of
setting the caps.
2013-05-10 11:24:46 +02:00
Mathieu Duponchelle
46aff49316 oggmux: don't send a segment event before the caps event
https://bugzilla.gnome.org/show_bug.cgi?id=699971
2013-05-10 09:28:52 +02:00
Sebastian Dröge
4f52ad38e4 theoradec: Set DECODE_ONLY flag on all header packets 2013-05-09 10:40:19 +02:00
Mathieu Duponchelle
4c362768fc oggmux: The best pad can't be EOS
The problem experienced is that the EOS was never emitted by oggmux during a
rendering with GES. The proposed patch checks if the pad is EOS before deciding
it's the "best pad".

https://bugzilla.gnome.org/show_bug.cgi?id=699792
2013-05-08 14:26:17 +02:00
Sebastian Dröge
ef6a2a6c14 theoraenc: Don't call gst_buffer_fill() for empty Theora packets
gst_buffer_fill() does not like a NULL source data pointer.
2013-05-07 10:16:48 +02:00
Sebastian Dröge
f3b6548f09 theoraenc: Fix error handling when reading or writing multipass cache data fails 2013-05-07 10:13:18 +02:00
Sebastian Dröge
abdfb8d452 vorbis: Fix compilation after function rename 2013-05-03 15:49:50 +02:00
Andoni Morales Alastruey
35b3d805ed vorbis: prefix get_copy_sample_func and fix duplicated symbols 2013-05-03 14:30:03 +02:00
Andoni Morales Alastruey
595c49c40d ivorbisdec: fix duplicated symbols with vorbisdec 2013-05-03 14:29:52 +02:00
Tim-Philipp Müller
f9befdecfe textrender: actually fixate output caps when fixating output caps 2013-05-02 23:41:02 +01:00
Andoni Morales Alastruey
47cbbe6514 ogg: fix duplicated symbols with schroedinger 2013-05-02 14:02:19 +02:00
Stefan Sauer
cdfc05ec4d oggmux: add more logging and fix the object param for some logging
Use data->pad instead of pad for 'object'. Reduce indentation depth in a helper
with an early return.
2013-04-17 21:47:11 +02:00
Sebastian Dröge
948a4a3632 gst: Add better support for static plugins 2013-04-15 15:52:58 +02:00
Sebastian Dröge
6e01d1869b ogg: Prevent some symbol conflicts between the ogg plugin and schroedinger 2013-04-15 08:38:34 +02:00
Olivier Crête
48208c61a8 audiovisualizer: Don't try to sync controller values to invalid timestamp 2013-04-05 00:43:41 +01:00
Wim Taymans
461d58795a oggdemux: don't push on NOT_LINKED pads
If our previous flow return was NOT_LINKED, don't try to push on the pads some
more. If we get a RECONFIGURE event on the pad, try to push on it again.
2013-04-04 18:18:54 +02:00
Nicolas Dufresne
e58f838ca3 oggdemux: Allow EOS on timestamp equal to stop/start
Changed the check to a current_time equal to the stop will produce
EOS instead of the next one. Also, segment.start can't be NONE, so removing
this check.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=696899
2013-04-04 10:09:26 +02:00
Matthew Waters
4f1ba51c4b visualizer: handle non-existant pool in the default allocation query
gst_query_set_nth_allocation_pool() requires there to be a pool in the
query already. This is not always the case when we get the query from
upstream.  Use gst_query_add_allocation_pool() instead in such case.

https://bugzilla.gnome.org/show_bug.cgi?id=681719
2013-04-01 21:13:38 +01:00
Wim Taymans
564f720c40 oggdemux: mark keyframes
Use the mapper to set the delta-unit flag.
2013-03-31 18:57:13 +02:00
Wim Taymans
f15bc6835b theoradec: handle empty adapter
Should not be empty but might be when we actually pass and decode the 0 packets
later.
2013-03-31 18:31:36 +02:00
Vincent Penquerc'h
da673880eb theoraenc: do not reset the encoder when we need a keyframe
Instead, remember we need a keyframe, and we will force the encoder
to emit one next time we submit a new frame.
Since libtheora does not have an API to request a keyframe, we reset
the max keyframe interval to 1 temporarily.

This has the advantage that the rate control keeps its history,
and that the encoder won't choose different quant tables or
somesuch, thus requiring new streamheaders (although this is
probably only a theoretical possibility). Should also be a
bit faster than resetting the encoder.

https://bugzilla.gnome.org/show_bug.cgi?id=663350
2013-03-31 15:45:26 +01:00