Deterministic generation of snow and smpte is important for tests so
that it's not affected by other videotestsrc elements in current or
possibly previous tests.
https://bugzilla.gnome.org/show_bug.cgi?id=773102
It's been broken for years, and it's unlikely it will ever
be fixed for collectpads/adder now that there's audiomixer
which works fine. So let's disable it, since all it does
is that it creates noise that distracts from other failures.
https://bugzilla.gnome.org/show_bug.cgi?id=708891
The videoscale test takes eternities to run, that's not
great. Split the test into multiple ones. That way they
can be run in parallel. Reduces time to run all tests in
-base from 29 secs to 12 secs when using meson/ninja.
It internally uses gst_check_chain_func() so we
should call gst_check_drop_buffers() when tearing down tests to free
the buffers which have been exchanged through the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=766226
It internally uses gst_check_chain_func() so we
should call gst_check_drop_buffers() when tearing down tests to free
the buffers which have been exchanged through the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=766226
It internally uses gst_check_chain_func() so we
should call gst_check_drop_buffers() when tearing down tests to free
the buffers which have been exchanged through the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=766226
WebVTT is a new subtitle format for HTML5 video. In this first
version of the parser the cue settings are parsed but only stored in
the internal parser state structure. Later on these settings could be
part of the GstBuffer metadata.
https://bugzilla.gnome.org/show_bug.cgi?id=629764
The default one is 6 minutes, the test was using 5 minutes so just
resort to using the default.
For the non-valgrind test also use the default 20 secs instead of
reducing it to 6s. No real reason to set a custom value here.
When caps are already negotiated it should be possible to
select formats other than the one that was negotiated. If downstream
allows alpha video caps and it has already negotiated to a non-alpha
format, caps queries should still return the alpha caps as a possible
format as caps renegotiation can happen.
Includes tests (for compositor) to check that caps queries done after
a caps has been negotiated returns complete results
https://bugzilla.gnome.org/show_bug.cgi?id=757610
Reduce resolution, which shouldn't make any difference
to what's tested here. Makes test finish in less than
half the time it took before (8s vs. 21s).
value of 32768L << 16 and 1L << 31 is 2147483648
but it exceeds the positive range of int which is 2147483647
resulting in integer overflow error. Use G_GINT64_CONSTANT instead of L.
https://bugzilla.gnome.org/show_bug.cgi?id=760769
We did not take the sample size into account. Rearrange the tests to have more
conversion test and an extra test case for passthrough operations.
Fixes#759890
Use (1 << 31) as the multiplier for int<->float conversions. This makes
sure that int->float conversions always end up with floats between
[-1.0, 1.0].
For the conversion from float to int, this multiplier will give the complete
int range after we perform clipping.
Change the unit test to take this into consideration.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=755301
While creating caps in audiointerleave tests, bitmask is being set as 0x9
This is resulting in segmentation fault. Fix the same by typecasting to guint64
https://bugzilla.gnome.org/show_bug.cgi?id=755840
The obscured check in compositor was using the dimensions of the pad to clamp
the h/w of the pad instead of the output resolution, and was doing an incorrect
calculation to do so. Fix that by simplifying the whole calculation by using
corner coordinates. Also add a test for this bug which fell through the cracks,
and just skip all the obscured tests if the pad's alpha is 0.0.
https://bugzilla.gnome.org/show_bug.cgi?id=754107
We need to sync the pad values before taking the aggregator and pad locks
otherwise the element will just deadlock if there's any property changes
scheduled using GstController since that involves taking the aggregator and pad
locks.
Also add a test for this.
https://bugzilla.gnome.org/show_bug.cgi?id=749574
When the 'ignore-eos' property is set on a pad, compositor will keep resending
the last buffer on the pad till the pad is unlinked. We count the buffers
received on appsink, and if it's more than the buffers sent by videotestsrc, the
test passes.
The original 0/1 framerate must still be allowed to be configured
on the upstream side of videorate, otherwise future caps renegotiation
is going to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=750032
Rather than one of the input pad video info's.
The test checking this was not constraining the output frame size
to ensure that the out of frame stream was not being displayed.
We verify that all the buffers on an obscured sinkpad are skipped by overriding
the map() function in the GstVideoMeta of the buffers to set a variable when
called. We also test that the buffers do get mapped when they're not obscured.
Blame^WCredit for the GstVideoMeta map() idea goes to Tim.
https://bugzilla.gnome.org/show_bug.cgi?id=746147
A bitmask is 64 bits, but integer immediates are passed as int
in varargs, which happen to be 32 bit with high probability.
This triggered a valgrind jump-relies-on-uninitalized-value
report well away from the site, since it doesn't trigger on
stack accesses, and there must have been enough zeroes to stop
g_object_set at the right place.
Remove all the bus watch and main loop code from the block_deadlock
test, it's not needed: neither pipeline will ever post an EOS or ERROR
message on the bus, and we're the only ones posting an error, from a
timeout. Might just as well just sleep for a bit and then do whatever
we want to do.
Don't gratuitiously set tcase timeout, just use whatever is the
default (or set via the environment).
Make individual pipeline runs shorter.
Check for valgrind and only do a handful iterations when running
in valgrind, not 100 (each iteration takes about 4s on a core i7).
Make videotestsrc output smaller buffers than the default resolution,
we don't care about the buffer contents here anyway.
Fixes test timeouts when run in valgrind.
On slower systems, or under high system load (e.g. check-valgrind),
the sending_buffers_with_9_gstmemories test would sometimes fail,
because the read call only returns 32 bytes instead of the full
36 bytes expected. This is because multisocketsink might end up
doing a partial write of 32 bytes first, and then write the
missing 4 bytes later, but since we don't wait for all of data
to be written, there's a short window where our read call in the
unit test might then only receive the 32 bytes written so far,
which makes it deeply unhappy.
Instead, make sure we loop to read all bytes.
In case upstream does not provide videorate with framerate information,
it will detect the current framerate from the buffer it received,
but if downstream forces the use of variable framerate (most probably
through the use of a caps filter with framerate = 0 / 1), videorate will
respect that.
And add some unit tests
https://bugzilla.gnome.org/show_bug.cgi?id=734424
If a buffer is made up of non-contiguous `GstMemory`s `gst_buffer_map`
has to copy all the data into a new `GstMemory` which is contiguous. By
mapping all the `GstMemory`s individually and then using scatter-gather
IO we avoid this situation.
This is a preparatory step for adding support to multisocketsink for
sending file descriptors, where a GstBuffer may be made up of several
`GstMemory`s, some of which are backed by a memfd or file, but I think this
patch is valid and useful on its own.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=746150
The flush stop could have happened between the source trying
to push the segment event and the buffer, this would cause a warning.
Prevent that by taking the source's stream lock while flushing.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
With the current audiomixer, the input caps need to be the same,
otherwise there is an unavoidable race in the caps negotiation. So
enforce that using capsfilters
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Adds a new test to textoverlay to make sure it can properly handle
elements that have ANY caps but fail to add the overlay meta in
the allocation query.
This test verifies that textoverlay won't use the caps features even
knowing that the overlay meta is accepted when querying the downstream
caps because it also needs downstream to confirm by putting the meta
in the allocation query.
https://bugzilla.gnome.org/show_bug.cgi?id=735800
Make textoverlay negotiate caps more correctly.
1) Check what caps we received in the video-sink
2) If it already has the overlay meta -> use it directly
3) If it doesn't, textoverlay try adding the overlay meta and using it,
if downstream doesn't support it, just use what is received in the
video-sink
4) Check if the allocation query also supports the meta to enable
really using it
Before it wasn't really doing renegotiation of any kind, just
re-checking if it should use the overlay meta or not
Also had to update the caps in the test as memory:SystemMemory seems
to be required when you use a caps feature otherwise intersection/subset
checks will fail.
https://bugzilla.gnome.org/show_bug.cgi?id=733916
Set up a fakesink with a pad probe to replace the missing encoder to detect
if encoding was really required and only error out in this case. Otherwise
just let passthrough branch work.
This delays the error posting from the set_state function to when buffers
are really flowing. Unit test updated accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=650652
Aggregate buffering messages to only post the lower value
to avoid setting pipeline to playing while any multiqueue
is still buffering.
There are 3 scenarios where the entries should be removed from
the list:
1) When decodebin is set to READY
2) When an element posts a 100% buffering (already implemented)
3) When a multiqueue is removed from decodebin.
For item 3 we don't need to handle it because this should only
happen when either 1 is hapenning or when it is playing a
chained file, for which number 2 should have happened for the
previous stream to finish
https://bugzilla.gnome.org/show_bug.cgi?id=726423
With the latest GLib, g_source_remove() complains about not finding
the timeout source with the given ID here, since it was already
destroyed by returning FALSE from the timeout callback. Also return
FALSE from the bus watches when we don't want to be called any more.
Wait for thread to exit before starting to free the
to_push list, otherwise thread might check the final
to_push->next node only after we've freed it already.
The array of factories should not contain a NULL element at the end
since the number of arguments is determined via G_N_ELEMENTS and the
NULL will be used as an argument to gst_element_factory_make() if
the other sources in the list weren't usable.
This allows getting a pad for a specific encoding profile, which can
be useful when there are several stream profiles of the same type.
Also update the encodebin unit tests so that we check that the returned
pad has the right caps.
https://bugzilla.gnome.org/show_bug.cgi?id=689845
