Vincent Penquerc'h
0ca385a970
opus: multichannel support
2011-11-24 13:40:34 +00:00
Vincent Penquerc'h
5da03cd2a4
opus: switch to multistream API
...
It's very similar to the basic API, and is a superset ot it,
which will allow encoding and decoding more than 2 channels.
2011-11-24 13:40:34 +00:00
Vincent Penquerc'h
745cc8d4e4
opusdec: shuffle supported sample rates to favor 48000
2011-11-24 13:40:34 +00:00
Vincent Penquerc'h
f1477522de
opusenc: remove useless setup field
2011-11-24 13:40:34 +00:00
Mark Nauwelaerts
9680108d77
faac: do not leak buffer when no encoded data yet or encoding error
2011-11-23 23:30:00 +01:00
Mark Nauwelaerts
8b5fbcaedd
dtsdec: port to audiodecoder
2011-11-23 23:29:10 +01:00
Krzysztof Krakowiak
4286414e00
modplug: fix modules playing as mono instead of stereo
...
replaced broken if-return logic for fixating rate and number
of channels that caused that modules were always (after
successful fixation of rate) played as mono (instead of
stereo) by correct one with appropiate warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=619035
2011-11-23 15:30:28 +00:00
Vincent Penquerc'h
4bd5ef9bc5
opusdec: implement replay gain
...
It would ideally be better to leave this to a rgvolume element,
but we don't control the pipeline. So do it by default, and allow
disabling it via a property, so the correct volume should always
be output.
2011-11-23 14:03:30 +00:00
Vincent Penquerc'h
b80f52a729
opusdec: add in-band FEC support
...
This allows reconstruction of lost packets if FEC info is included
in the next packet, at the cost of extra latency. Since we do not
know if the stream has FEC (and this can change at runtime), we
always incur the latency, even if we never lose any frame, or see
any FEC information. Off by default.
2011-11-23 12:08:01 +00:00
Tim-Philipp Müller
cd851cc712
opusenc: mark properties changeable at runtime with GST_PARAM_MUTABLE_PLAYING
2011-11-22 20:27:50 +00:00
Vincent Penquerc'h
5e1df00674
opusenc: allow setting most properties at PLAYING time
...
Opus allows these to be changed during encoding, transparently
to the decoder.
2011-11-22 17:04:09 +00:00
Vincent Penquerc'h
5367aa8dbf
opusenc: bound the bitrate to more sensible values
...
Go from the bounds mentioned in the spec, and allow some more
variation.
In particular, don't allow silly low bitrates, and allow reaching
the maximum useful bitrate.
2011-11-22 16:14:06 +00:00
Vincent Penquerc'h
49e08a1835
opusenc: fix crash on pathological parameters
...
Asking for 1 bit/s would select a 0 byte buffer, leading
to a crash. Buffer size is now controlled by a max-payload-size
property, which can't be less than 2.
2011-11-22 15:33:20 +00:00
Vincent Penquerc'h
da5c41930c
opusparse: do not send headers through data path
...
Additionally, since Opus packets may change between stereo
and mono as the encoder sees fit, assume two channels when
we do not see a header, and use the header value otherwise.
2011-11-22 13:20:32 +00:00
Vincent Penquerc'h
694775a7b1
opus: move header magic testing to gstopusheader
2011-11-22 13:20:31 +00:00
Vincent Penquerc'h
5ac7ff57fd
opusdec: skip pre-skip samples
2011-11-22 13:20:31 +00:00
Vincent Penquerc'h
b98cc2d092
opusdec: read pre-skip from first header if available
2011-11-22 13:20:31 +00:00
Vincent Penquerc'h
6bcf813ed0
opusenc: reset tagsetter interface on stop
2011-11-21 12:02:28 +00:00
Vincent Penquerc'h
d95530bfbf
opusdec: handle NULL packets (used for PLC)
2011-11-21 11:51:21 +00:00
Vincent Penquerc'h
b9d47a00ca
opusdec: light cleanup
2011-11-21 11:51:21 +00:00
Vincent Penquerc'h
6c2c0aef53
opusparse: parse raw opus packets
2011-11-21 11:51:21 +00:00
Vincent Penquerc'h
c0695ba7f2
opusenc: do not push header buffers
...
Opus headers appear only when muxed in Ogg, so only place them
on the caps, where oggmux will find them, but other elements will
be blithely unaware of them.
2011-11-21 11:51:21 +00:00
Vincent Penquerc'h
bff6e3c628
opus: make opusparse set headers on caps
...
Header-on-caps code moved to a new shared location to avoid
duplicating the code.
2011-11-21 11:51:20 +00:00
Vincent Penquerc'h
7664e28a0c
opusenc: fix terminating NUL being written in signature
2011-11-19 15:59:53 +00:00
Vincent Penquerc'h
5dd147d705
opusenc: make frame-size an enum
...
It only supports a set number of specific values (including
a non integer one).
2011-11-19 15:59:52 +00:00
Vincent Penquerc'h
f8bb784135
opusenc: the encoder might not make use of all the bytes
2011-11-19 15:59:52 +00:00
Stefan Sauer
b7cb6ecedb
opencv: use caps constants more
2011-11-18 20:57:31 +01:00
Stefan Sauer
4f69b60ac0
opencv: fixup doc blobs
2011-11-18 20:57:31 +01:00
Stefan Sauer
c613904c68
opencv: fixup gobject naming conventions
2011-11-18 20:57:31 +01:00
Stefan Sauer
ee91057526
opencv: remove empty finalize implementations
2011-11-18 08:30:37 +01:00
Mark Nauwelaerts
97279f1dfd
voamrwbenc: port to audioencoder
2011-11-17 23:04:23 +01:00
Mark Nauwelaerts
53723f81eb
voaacenc: some code shuffle cleanup
2011-11-17 23:04:21 +01:00
Mark Nauwelaerts
ea92249ee2
voaacenc: port to audioencoder
2011-11-17 23:04:18 +01:00
Mark Nauwelaerts
56701570e9
celtenc: properly report error case
2011-11-17 23:04:15 +01:00
Mark Nauwelaerts
8104d7a2ec
celtdec: remove unused instance variable
2011-11-17 23:04:05 +01:00
Stefan Sauer
fefa1df8b9
facedetect: detect face features
...
Also detect mouth, nose and eyes. Drop faces that don't have them. Fixes leaking the
cascades. Adds more docs.
2011-11-16 21:03:36 +01:00
Stefan Sauer
a857c90590
facedetect: Gstfacedetect -> GstFacedetect
2011-11-16 21:03:36 +01:00
Stefan Sauer
94534a0b83
facedetect: code maintenance
...
Update example to be useful. Draw colored ellipses instead of unicolor circles.
Reflow code for more local variables. Improve parameter descriptions.
2011-11-16 21:03:36 +01:00
Vincent Penquerc'h
15b5fecf30
opusenc: do not include variable fields in caps
...
Those can vary from one packet to the next, so have no reason
to be in the caps.
2011-11-16 18:51:16 +00:00
Vincent Penquerc'h
af8771ef2f
opusenc: fix constrained-vbr property name typo
2011-11-16 18:51:16 +00:00
Vincent Penquerc'h
714ced7d19
opusdec: let the base class handle all timing
2011-11-16 18:35:29 +00:00
Mark Nauwelaerts
2842e14263
celtdec: port to audiodecoder
2011-11-16 19:19:15 +01:00
Mark Nauwelaerts
c90f45df00
celtenc: port to audioencoder
2011-11-16 19:13:02 +01:00
Vincent Penquerc'h
5efa9ebec8
opusparse: add opusparse element
...
A very simple element that parses Opus streams from the ad hoc
framing used by the Opus test vectors.
2011-11-16 17:58:15 +00:00
Vincent Penquerc'h
a02e18917f
opusdec: allow negotiation of rate/channels with downstream
...
Since an opus stream may be decoded to any (sensible) rate,
and either stereo or mono, we try to accomodate downstream.
2011-11-16 17:45:00 +00:00
Vincent Penquerc'h
d10cbd0268
opusdec: rewrite logic
...
Parameters such as frame size, etc, are variable. Pretty much
everything can change within a stream, so be prepared about it,
and do not cache parameters in the decoder.
2011-11-16 17:45:00 +00:00
Vincent Penquerc'h
da1eaa2d78
opus: port to base audio encoder/decoder
2011-11-16 17:45:00 +00:00
Mart Raudsepp
61cc352902
mimic, opencv, vp8, acmmp3dec, linsys: Don't build static plugins
...
Pass --tag=disable-static to libtool everywhere where it's been forgotten
https://bugzilla.gnome.org/show_bug.cgi?id=663768
2011-11-11 11:54:15 +00:00
Vincent Penquerc'h
609ae9b812
opusenc: fix bandwidth property type mismatch
2011-11-10 17:14:10 +00:00
Vincent Penquerc'h
ab27c0da8e
tiger: add a 'silent' property to skip rendering
...
https://bugzilla.gnome.org/show_bug.cgi?id=662857
2011-11-07 12:14:57 +00:00
Vincent Penquerc'h
cabc01f107
resindvdsrc: do not try to seek before the first chapter
...
https://bugzilla.gnome.org/show_bug.cgi?id=589064
2011-11-07 11:55:59 +00:00
Vincent Penquerc'h
826eb57183
celtenc: fix latency query
...
https://bugzilla.gnome.org/show_bug.cgi?id=616421
2011-11-07 11:21:27 +00:00
Vincent Penquerc'h
97d456bad2
opusenc: fix latency query
...
This makes live 'audiosrc ! opusenc ! opusdec ! audiosink' pipelines
actually work without all audio being dumped.
https://bugzilla.gnome.org/show_bug.cgi?id=660999
2011-11-07 11:21:27 +00:00
Vincent Penquerc'h
18c2d1ef9f
opusenc: use debug level for debug info, not error
...
https://bugzilla.gnome.org/show_bug.cgi?id=660999
2011-11-07 11:21:27 +00:00
Vincent Penquerc'h
ac95f56d2e
celtenc: fix calculation of filler data size
...
https://bugzilla.gnome.org/show_bug.cgi?id=660469
2011-11-07 11:21:26 +00:00
Vincent Penquerc'h
4a4b1f472e
opusenc: fix calculation of filler data size
...
https://bugzilla.gnome.org/show_bug.cgi?id=660469
2011-11-07 11:21:26 +00:00
Tim-Philipp Müller
4060056ce6
assrender, nuvdemux: unref buffers with gst_buffer_unref()
2011-10-18 14:41:48 +01:00
Vincent Penquerc'h
9f9d52c6cb
opusdec: fix decoding
...
A simple ... opusenc ! opusdec ... pipeline now works.
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:37 +02:00
Vincent Penquerc'h
532e90a34d
opusenc: moan if we get an unexpected amount of data
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:24 +02:00
Vincent Penquerc'h
934144c352
opus: properly setup caps and init state from caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:15 +02:00
Vincent Penquerc'h
85de20b8a1
opusenc: use the same frame size setup as the opus test code
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:02 +02:00
Vincent Penquerc'h
8caa7adb5e
opusdec: opus supports a select set of sampling rates
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:20:52 +02:00
Vincent Penquerc'h
ae510870e9
opus: make it build against current, and remove cruft
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:20:46 +02:00
Vincent Penquerc'h
fa3d661083
kate: avoid rendering when we know there is nothing to render
...
https://bugzilla.gnome.org/show_bug.cgi?id=660528
2011-10-03 10:38:43 +02:00
Vincent Penquerc'h
12bb47343d
kate: fix race condition on PAUSED->READY state change
...
https://bugzilla.gnome.org/show_bug.cgi?id=660630
2011-10-03 10:36:35 +02:00
Sebastian Dröge
fc2434fd97
faac: Also set maximum number of samples that the subclass wants
2011-09-26 16:26:31 +02:00
Sebastian Dröge
874da87b25
faac: Simple fix for GstAudioEncoder API change
2011-09-26 16:05:40 +02:00
Tim-Philipp Müller
e37634e9f9
faad: fix compiler warning
...
gstfaad.c: In function 'gst_faad_parse':
gstfaad.c:615:11: error: 'len' may be used uninitialized in this function
2011-09-23 10:10:37 +01:00
Tim-Philipp Müller
c9f7e9b26d
faad: parse wants a GstFlowReturn return value, not a gboolean
2011-09-23 09:57:01 +01:00
Mark Nauwelaerts
3900dc94ed
faac: fixup misunderstanding in sample counting
...
... between codec and audioencoder regarding whether or not channel
count is already considered.
Fixes #659836 .
2011-09-22 18:24:43 +02:00
Mark Nauwelaerts
131df954ce
faad: use some more boilerplate
2011-09-22 16:06:07 +02:00
Mark Nauwelaerts
7234914e0f
faad: port to audiodecoder
2011-09-22 16:06:04 +02:00
Mark Nauwelaerts
a7ed9677ba
faac: use some more boilerplate
2011-09-22 16:02:52 +02:00
Mark Nauwelaerts
c8a3567923
faac: port to audioencoder
2011-09-22 16:02:49 +02:00
Vincent Penquerc'h
70be630427
kate: forward return code from setting src pad caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=659606
2011-09-21 13:59:54 +02:00
Vincent Penquerc'h
fe0a2ec885
celt: a bit more error checking on header parsing
...
https://bugzilla.gnome.org/show_bug.cgi?id=659087
2011-09-19 09:39:16 +02:00
Vincent Penquerc'h
d8684fffa1
celtenc: cleanup header creation
...
Avoid an extra copy via a temporary fixed size stack buffer.
Use libcelt's header size to allocate a buffer of the correct
size in the first place (libcelt has an off by 4 there, so
account for this).
While there, make size unsigned, and granpos signed.
https://bugzilla.gnome.org/show_bug.cgi?id=659087
2011-09-19 09:39:00 +02:00
Vincent Penquerc'h
06764fcd3f
celtenc: do not use invalid buffer timestamps
...
https://bugzilla.gnome.org/show_bug.cgi?id=659087
2011-09-19 09:37:16 +02:00
Vincent Penquerc'h
37e688197d
celtdec: fix error checking with libcelt 0.11
...
The return value of celt_decode has changed, newer versions
now return positive values on success.
https://bugzilla.gnome.org/show_bug.cgi?id=659087
2011-09-19 09:36:59 +02:00
Vincent Penquerc'h
90b2484648
celtenc: allow actually overriding frame size
...
https://bugzilla.gnome.org/show_bug.cgi?id=659087
2011-09-19 09:36:45 +02:00
Vincent Penquerc'h
c8bda2ed76
kate: flush on seek, and ensure we cancel any waiting buffer
...
This is what pango textoverlay does, and I've had that condition
variable get stuck once.
https://bugzilla.gnome.org/show_bug.cgi?id=658940
2011-09-19 09:35:24 +02:00
Olivier Crête
b872f84c96
spanplc: Fix typos
2011-09-15 18:17:52 -04:00
Alessandro Decina
f33b78abd1
rtmpsink: don't block the main thread with RTMP_Connect
...
Move the RTMP_Connect call from the main thread (::start) to the streaming
thread (::render).
2011-09-12 11:23:03 +02:00
Youness Alaoui
61ee9918be
spandsp: Adding spandsp plugin with spanplc element for packet loss concealment
2011-09-08 18:11:33 -04:00
Stefan Sauer
e21c4abc50
kateparse: fix crap in object macros
2011-09-07 15:50:42 +02:00
David Schleef
cd35839e98
vp8enc: fix drop-frame property
...
Fixes #656929 .
2011-09-01 17:04:52 -07:00
Josep Torra
d663259d4b
mms: fix warnings related to the format on the debug lines.
2011-08-31 23:06:53 +02:00
Jan Schmidt
8fbf3a3129
soundtouch: Handling incoming rate when requested.
...
Absorb inbound segments with rate != 1.0 and output a segment with
rate taken from the new output-rate property, adjusting the segment
applied_rate, stream duration and timestamps as necessary to
compensate
2011-08-30 17:49:29 +10:00
Nicola Murino
436620fff9
fix valgrind warning about Conditional jump or move depends on uninitialised value(s)
2011-08-26 15:54:19 +02:00
Nicola Murino
71a2a1be8e
Move m_pprevFrame free just before the clone of the latest frame for readability
2011-08-26 15:54:19 +02:00
Tim-Philipp Müller
dc3db053b5
kate: make gst_kate_util_is_utf8_string() inline to fix compiler warning with older libkate versions
...
gstkateutil.c:230:1: error: 'gst_kate_util_is_utf8_string' defined but not used
2011-08-24 16:54:31 +01:00
Vincent Penquerc'h
04f7876f94
rsndvd: ensure metadata is writable when writing to it
...
https://bugzilla.gnome.org/show_bug.cgi?id=657250
2011-08-24 16:37:30 +01:00
Vincent Penquerc'h
d1a6ca2203
kate: pass on timed event metadata as tags when we can
...
Metadata attached to other objects that may be used in this
event are not passed, as is binary metadata.
2011-08-23 10:34:48 +02:00
Vincent Penquerc'h
c24d052bb7
vp8: probe for the new tuning API to keep building with older libvpx
...
https://bugzilla.gnome.org/show_bug.cgi?id=656928
2011-08-23 10:23:21 +02:00
Vincent Penquerc'h
e323efc353
rsvgdec: use input buffer timings if possible
...
SVG data may come through multiple buffers, so keep track of the
timestamp of the first buffer, and use it in preference.
https://bugzilla.gnome.org/show_bug.cgi?id=628284
2011-08-23 10:21:04 +02:00
Vincent Penquerc'h
1ed91ad1db
kate: do not consider an empty SPU to be a fatal error
...
Instead, just encode nothing and go on.
https://bugzilla.gnome.org/show_bug.cgi?id=657091
2011-08-23 10:16:30 +02:00
Vincent Penquerc'h
46cfb5fa4f
kate: do not clear out high bits from display area
...
http://dvd.sourceforge.net/spu_notes does not mention that high bits
are to be masked, and not clearing them makes a sample work, where
clearing them yielded left > right.
History from the dvdspu plugin, from where this code was copied,
does not shed any light, as tracing this code's origin shows
the same bitmasks being there in 2007 when it was imported.
https://bugzilla.gnome.org/show_bug.cgi?id=657091
2011-08-23 10:16:22 +02:00
Vincent Penquerc'h
57ae8c4bf5
ofa: fingerprint creation can fail
...
There does not seem to be a way to retrieve information
about why failure occured, unfortunately.
When failure occurs, do not post a NULL fingerprint tag.
https://bugzilla.gnome.org/show_bug.cgi?id=656641
2011-08-18 11:10:52 +02:00
Vincent Penquerc'h
6ef56f56d7
ofa: cleanup
...
Avoid repeating casting to GstAudioFilter when one will do
Use object related logging to make it easier to get just the logs we want
https://bugzilla.gnome.org/show_bug.cgi?id=656641
2011-08-18 11:10:09 +02:00
Vincent Penquerc'h
683fbaa81a
ofa: do not create fingerprint on EOS if record is FALSE
...
https://bugzilla.gnome.org/show_bug.cgi?id=656641
2011-08-18 11:07:48 +02:00