Commit graph

553 commits

Author SHA1 Message Date
Vivia Nikolaidou
652773de36 Revert "h264parse: Include interlace-mode in caps"
This reverts commit b75a61342f.

The parser would only set the mode to progressive or mixed, missing the
cases where it should have been interleaved. Interleaved is more
difficult to detect because in h264 it happens per frame. On the other
hand, h264 decoders detect the interlacing information per-frame and set
the caps correctly. By giving potentially incorrect interlacing
information in the parser already, it's being enforced downstream even
after decoding, breaking some use cases (e.g. an encoder can't properly
mark the stream as TFF or BFF). On the other hand, there's no valid use
case for having interlacing information on the caps at the parsing
stage, so after a lot of discussion, it was decided to revert this.

Initial commit message:
=========================
Those are the rules:

In the SPS:
  * if frame_mbs_only_flag=1 => all frame progressive
  * if frame_mbs_only_flag=0 => field_pic_flag defines if each frame is
    progressive or interlaced, thus the mode is 'mixed' in GStreamer
    terms.

https://bugzilla.gnome.org/show_bug.cgi?id=779309
=========================

Fixes #1313

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1335>
2020-06-22 16:08:41 +00:00
Nicolas Dufresne
269ab891c5 h264/h265parse: Fix initial skip
Account for start codes possibly be 4 bytes. For HEVC, also take into
account that we might be missing only one of the two identification
bytes.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
2020-05-07 12:08:36 -04:00
Nicolas Dufresne
3784bd4a73 h265parse: Ensure correct timestamps
If the input has a miss-placed filler zero byte (e.g. a filler without a 4
bytes start code on the next NAL), we would endup using the same timestamp
twice. Ask the base class to read the timestamp from the buffer were the NAL
actually starts.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
2020-05-07 12:08:36 -04:00
Nicolas Dufresne
dc4c470d75 h264parse: Properly handle 4 bytes start code
This will stop stripping four bytes start code. This was fixed and broken
again as it was causing the a timestamp shift. We now call
gst_base_parse_set_ts_at_offset() with the offset of the first NAL to ensure
that fixing a moderatly broken input stream won't affect the timestamps. We
also fixes the unit test, removing a comment about the stripping behaviour not
being correct.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
2020-05-07 12:08:36 -04:00
Nicolas Dufresne
0d637c14c5 h264/h265parse: Fix handling of very last frame
Baseparse will never call us back on draining, so going into more: label will
cause the current frame to be discarded. So if we have a complete NAL, but not
a complete AU, make sure to terminate the frame properly.

This is a gression introduce by commit e88d848070 and
a194a87b26.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1275

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1208>
2020-04-23 12:28:54 +00:00
Xavier Claessens
95134cfda8 h264parse: Remove unused arguments 2020-04-15 14:10:16 +00:00
Nicolas Dufresne
1ea21ad922 h264parse: Don't push NALs before we have HEADERS
Otherwise we may endup pushing incomplete caps, which cause a renegotiation.
Note that this has the effect that caps are no longer pushed twice in presence
of valid framerate in the headers.
2020-04-15 14:10:16 +00:00
Nicolas Dufresne
ff137a2059 h265parse: Don't push NALs before we have HEADERS
Otherwise we may endup pushing incomplete caps. Note that this has the side
effect that caps are no longer pushed twice in presence of VUI with valid
framerate.
2020-04-15 14:10:16 +00:00
Nicolas Dufresne
c51922b06c h265parse: Differentiate PREFIX SEI from SUFFIX
There is some code to fixup broken stream that uses the SEI location,
this code is meant to locate SUFFIX SEI only. This should prevent
unwanted side effect if SUFFIX SEI is used.
2020-04-15 14:10:16 +00:00
Nicolas Dufresne
1aede43af6 h265parse: Don't add latency when not needed
We no longer add latency when doing AU->AU, AU->NAL and NAL->NAL
parsing.
2020-04-15 14:10:16 +00:00
Nicolas Dufresne
ceb68c4cf8 h265parse: Propagate MARKER flag 2020-04-15 14:10:16 +00:00
Nicolas Dufresne
e88d848070 h265parse: Don't wait for next NAL if input is aligned
Waiting for the next NAL increases the latency. If alignment=nal/au
has been negotiated, assumes the the buffer contains a complete
NAL and don't expect a second start-code. This way, nal -> nal,
au -> au and au -> nal no longer introduce latency.

As a side effect, the collect_pad() function was not able to poke at the
following NAL. This call is now moved before processing the NAL, so
it's looking at the current NAL before it's ingested into the parser
state in order to dermin if the end of an AU has been reached. The AUD
injection state as been adapted to support this.

This change will break pipelines if alignment=nal is used without respecting the
alignment. Effectively, the parser will no longer fix the broken aligment
which will result in parser error and the termination of the pipeline. Such
issue existed in tsdemux element and might exist in any forks of that code.

Related to https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1193
2020-04-15 14:10:16 +00:00
Nicolas Dufresne
7cba3847ec h265parse: Set PTS/DTS and DISCONT on crafted NAL
When we inject a NAL in the bitstream before another one, make
sure to pass both DTS and PTS. Also make sure to transfer the
DISCONT flag properly.
2020-04-15 14:10:16 +00:00
Nicolas Dufresne
c52fdf994c h264parse: Don't add latency when not needed
We no longer add latency when doing AU->AU, AU->NAL and NAL->NAL
parsing.
2020-04-15 14:10:15 +00:00
Nicolas Dufresne
ba8b605c6f h264parse: Propagate MARKER flag 2020-04-15 14:10:15 +00:00
Nicolas Dufresne
a194a87b26 h264parse: Don't wait for next NAL if input is aligned
Waiting for the next NAL increases the latency. If alignment=nal/au
has been negotiated, assumes that the buffer contains a complete
NAL and don't expect a second start-code. This way, nal -> nal,
au -> au and au -> nal no longer introduce latency.

As a side effect, the collect_pad() function was not able to poke at the
following NAL. This call is now moved before processing the NAL, so
it's looking at the current NAL before it's ingested into the parser
state in order to dermin if the end of an AU has been reached. The AUD
injection state as been adapted to support this.

This change will break pipelines if alignment=nal is used without respecting the
alignment. Effectively, the parser will no longer fix the broken aligment
which will result in parser error and the termination of the pipeline. Such
issue existed in tsdemux element and might exist in any forks of that code.

Related to https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1193
2020-04-15 14:10:15 +00:00
Nicolas Dufresne
ea99aee881 h264parse: Set PTS/DTS and DISCONT on crafted NAL
When we inject a NAL in the bitstream before another one, make
sure to pass both DTS and PTS. Also make sure to transfer the
DISCONT flag properly.
2020-04-15 14:10:15 +00:00
Nicolas Dufresne
596dfbdf37 h264parse: Remove no-op assignment
upstream was set to *out_ts, setting *out_ts to upstream here will
have no effect.
2020-04-15 14:10:15 +00:00
Seungha Yang
462a8130a6 h264parse: Remove useless comparison
sei_pic_struct is unsigned and GST_H264_SEI_PIC_STRUCT_FRAME is zero.

CID: 1461467
2020-04-13 12:28:14 +00:00
Nicolas Dufresne
eea520fe6d h264parse: Fix content light level value changes
Same as for H265, was found by Coverity.
2020-04-08 14:01:23 -04:00
Nicolas Dufresne
84a58b3633 h265parse: Fix content light level value changes
The comparision was not testing anything meaninful. This fixes the comparision
so we now update the caps whenever the value differ. This was detected by
coverity.

CID 1461291
2020-04-08 13:58:51 -04:00
Seungha Yang
be8cec5348 h264parse: Add support for inband timecode update
Add new property "update-timecode" to allow updating timecode
in picture timing SEI depending on timecode meta. Since the picture
timing SEI message requires proper VUI setting but we don't support
re-writing SPS, this might not work for some streams
2020-04-08 15:39:12 +00:00
Seungha Yang
fffbec11e4 h264parse: Don't unconditionally append timecode meta
If upstream buffer has its own timecode metatdata, don't append
new timecode meta into the buffer.
2020-04-08 15:39:12 +00:00
Seungha Yang
1a09251699 h264parser: Parse all SEI payload type even if it's not handled by parser
... so that user can handle it from outside of parser API
2020-04-08 15:39:12 +00:00
Seungha Yang
f05effe024 h264parse,h265parse: Update for video-hdr struct change
See the change of -base https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/594
2020-04-01 05:18:11 +00:00
Zeeshan Ali
355719bae7 h265parse: Set duration on buffers base on framerate 2020-03-31 14:13:30 +00:00
Zeeshan Ali
158d69fd45 h265parse: Derive src fps from vui_time_scale & vui_num_units_in_tick 2020-03-31 14:13:30 +00:00
Zeeshan Ali
51bc67d4ef h265parse: Handle interlaced video
For interlaced video:
* set the interlace mode in the src caps
* double the height from SPS in the caps.
* set field latency, instead of frame latency.

Fix #778
2020-03-31 14:13:30 +00:00
Seungha Yang
d81438a69e h264parse: Print all the syntax elements of frame packing for debugging
Other values might be useful for debugging
2020-03-31 08:30:50 +00:00
Seungha Yang
4b06b1a56e h265parse: In-band sps/pps update if only codec_data differs in src caps
Apply in-band sps/pps resending implementation to h265parse.
2020-03-10 08:51:04 +00:00
Seungha Yang
82a7d1cd99 h264parse: In-band sps/pps update if only codec_data differs in src caps
Initially the case "only codec_data is different" was addressed in
https://bugzilla.gnome.org/show_bug.cgi?id=705333 in order for
unusual bitstreams to be handled. That's the case where sps and pps
are placed in bitstream. When sps/pps are signalled only via caps
by upstream, however, the updated codec_data is mandatory for decoder
and therefore we shouldn't ignore them.
2020-03-10 08:51:04 +00:00
Seungha Yang
959320264a h265parser: Add helper macro for nal type classification
Add some macros to remove code duplication and to make it more readable
2020-03-05 23:22:34 +09:00
Josep Torra
bebf20c906 h264parse: do not push wrong PTS with some raw files
Some raw h264 encoded files trigger the assignment of wrong PTS to buffers
when some SEI data is provided. This change prevents it to happen.

Also ensure this behavior is being tested.
2020-01-10 15:03:38 +00:00
Stéphane Cerveau
4b8c47ee37 h26xparse: Handle state change on IDR first slice
As the H265/H264 bitstream can support multiple slices,
mastering_display_info_state and content_light_level_state
should be changed only on first slice segment.

Fix #1152
2020-01-07 08:55:28 +00:00
Stéphane Cerveau
d414e90eff h265parse: use same algo for MDCV and CLL SEI management 2020-01-07 08:55:28 +00:00
Stéphane Cerveau
b481edd745 h264parser: add MDCV and CLL SEI message parsing
Allow to parse SEI message for:
- mastering display colour volume
- Light level infomation

Set to caps if necessary.

Fix #958
2020-01-07 08:55:28 +00:00
Yeongjin Jeong
3f2240498b h265parser: Add simple GstH265Profile/string public utilites
It makes more simplifies the conversion between GstH265Profile and string.
2019-12-20 15:43:55 +00:00
Stéphane Cerveau
c6eb17be6e h264parse: Align GST_H264_PROFILE_HIGH_422 to H264 standards
According to H264 ITU standards from 06/19, GST_H264_PROFILE_HIGH_422
(profile_idc = 122) with constraint_set1_flag = 0 and
constraint_set3_flag = 0 can be mapped to high-4:2:2 or high-4:4:4.
GST_H264_PROFILE_HIGH_422 with constraint_set1_flag = 0 and
constraint_set3_flag = 1 can be mapped to high-4:2:2, high-4:4:4,
high-4:2:2-intra or high-4:4:4-intra.
2019-12-18 03:03:40 +00:00
Olivier Crête
1f766a7145 Revert "videoparseutils: support two new EIA 608 closed caption formats"
This reverts commit f5c1c90122.
2019-12-17 16:44:10 -05:00
Aaron Boxer
f5c1c90122 videoparseutils: support two new EIA 608 closed caption formats 2019-12-17 18:26:35 +00:00
Aaron Boxer
e3297be433 h264parse: buffer mismatch in map/unmap 2019-11-26 13:07:47 -05:00
Vivia Nikolaidou
851682629e videoparsers: Disable gst_base_parse_set_infer_ts
From the documentation of gst_base_parse_set_infer_ts, it should be
disabled for non-audio data. Currently just disabling for all video
parsers that have reordered data: h264, h265, mpeg, mpeg4, vc1. Was
already disabled in h263.
2019-11-19 10:23:31 +02:00
Nicolas Dufresne
44322b1dfc vc1parse: Avoid division by zero assertion
A framerate of 0/1 is valid, but we cannot calculate the frame duration
in this context. Simply protect against this case.

Related to #660
2019-11-11 16:23:18 -05:00
Nicolas Dufresne
a5113fe8c8 vc1parser: Relax ASF Binding Byte validation
According to the spec, the least significant bit is reserved and should
always we set to 1. Though, some wrong file has been found. Considering
how low important this reserved bit is, relax the validation.

Related to #660
2019-11-11 16:22:54 -05:00
Aaron Boxer
1414e58dfa jpeg2000parse: fail caps negotiation if caps are NOT fixed 2019-11-05 21:21:51 +00:00
Aaron Boxer
7b3491adf7 jpeg2000parse: use pre_push_frame to reset parser 2019-11-05 21:21:51 +00:00
Aaron Boxer
bfee115d66 jpeg2000parse: parse_event: call base class at end
derived class should do it's work first before calling base
2019-11-05 21:21:51 +00:00
Aaron Boxer
67cffd70ad jpeg2000parse: do hard reset if gst_base_parse_finish_frame fails 2019-11-05 21:21:51 +00:00
Aaron Boxer
a35157debf jpeg2000parse: initialize some variables to make valgrind happy 2019-11-05 21:21:51 +00:00
Aaron Boxer
fae0664824 jpeg2000parse: use GST_INT in caps for profile
Negotiation failed with GST_UINT
2019-11-05 21:21:51 +00:00