and install into a different directory $(libexecdir/gstreamer-0.10) so that
everything is versioned properly.
NOTE: run 'make clean' after updating; if you are running an uninstalled setup,
you will need to update your gst-uninstalled script (unless it's symlinked
to gstreamer core master) and exit/enter your uninstalled environment to get
the updated environment. If you are running an installed setup, you should
run 'make uninstall' before merging this change or remove the old
plugin-scanner binary manually.
Fixes#601698.
There's no need to have GstStreamConsistency in a public header for
the time being, so make it private. While we're at it, add a gtk-doc
blurb for it though. Re-fixes #588744.
Add a pattern scan function similar to the one recently added to
GstAdapter, and a unit test (based on the adapter one).
Fixes#585592.
API: add gst_byte_reader_masked_scan_uint32()
We don't want to use -Wall -Werror and friends when building the gtk-doc-generated
$docmodule-scan.c, since we can't easily fix stuff if a certain gtk-doc/compiler
combination breaks the build. Fixes build on ubuntu intrepid.
Original commit message from CVS:
* docs/Makefile.am:
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* docs/gst/running.xml:
* docs/libs/gstreamer-libs-docs.sgml:
Change to xinclude based build - its faster and easier to maintain.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbytereader.c: (gst_byte_reader_get_data),
(gst_byte_reader_peek_data):
* libs/gst/base/gstbytereader.h:
* win32/common/libgstbase.def:
API: Add gst_byte_reader_get_data and gst_byte_reader_peek_data
to get a pointer to the data at the current position and have
a guaranteed size.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_preroll),
(gst_base_sink_flush_start), (gst_base_sink_flush_stop),
(gst_base_sink_event), (gst_base_sink_perform_seek),
(gst_base_sink_loop), (gst_base_sink_pad_activate_pull),
(gst_base_sink_send_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add method to commit the state in subclasses.
Refactor the flush_start and flush_stop code because we need it for
flushing while seeking too.
Implement the beginnings of seeking in pull mode.
Use the segment last_stop field for the pulling offset.
Fix the pause method in pull mode.
Configure the segment to BYTES for pull mode.
API: GstBaseSink::gst_base_sink_do_preroll()
Original commit message from CVS:
* docs/design/part-negotiation.txt:
Small doc update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_pad_getcaps), (gst_base_sink_pad_setcaps),
(gst_base_sink_init), (gst_base_sink_set_blocksize),
(gst_base_sink_get_blocksize), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_needs_preroll),
(gst_base_sink_loop), (gst_base_sink_pad_activate),
(gst_base_sink_negotiate_pull), (gst_base_sink_pad_activate_pull),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add blocksize property and methods to control the amount of data
to pull.
Negotiate first before activating upstream in pull mode so that they can
negotiate themselves.
When we operate in pull mode, we only accept the caps that we
negotiated.
Make the sink go ASYNC to PAUSED, like all other sinks.
API: GstBaseSink::gst_base_sink_set_blocksize()
API: GstBaseSink::gst_base_sink_get_blocksize()
API: GstBaseSink::blocksize
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_set_live), (gst_base_src_is_live),
(gst_base_src_set_format), (gst_base_src_query_latency),
(gst_base_src_set_blocksize), (gst_base_src_get_blocksize),
(gst_base_src_set_do_timestamp), (gst_base_src_get_do_timestamp),
(gst_base_src_set_property), (gst_base_src_get_property):
* libs/gst/base/gstbasesrc.h:
Add typechecking in public API functions.
Add methods to control the blocksize in subclasses.
API: GstBaseSrc::gst_base_src_set_blocksize()
API: GstBaseSrc::gst_base_src_get_blocksize()
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Add new API to doc
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
API: gst_check_teardown_pad_by_name
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_query_latency), (gst_base_sink_set_render_delay),
(gst_base_sink_get_render_delay), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
* win32/common/libgstbase.def:
Add method to allow sinks to specify additional delay between the sync
times and the actual rendering of the data.
API: gst_base_sink_set_render_delay()
API: gst_base_sink_get_render_delay()
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Expose a method that was previously used internally to synchronize
against the clock because it can be useful for subclasses too.
GstBaseSink::gst_base_sink_wait_clock()
Original commit message from CVS:
* docs/gst/gstreamer.types.in:
* docs/libs/gstreamer-libs.types:
Remove library types fro core docs and have them in libs docs.
Reformat and cleanup. Add comment for miniobject types.
Original commit message from CVS:
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* gst/gstparamspecs.c:
* gst/gstparamspecs.h:
Add GST_PARAM_CONTROLLABLE and GST_PARAM_USER_SHIFT. Move paramspec
docs to own section.
* gst/gstvalue.c:
This now only documents GValue.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.h:
Remove GST_PARAM_CONTROLLABLE.
Original commit message from CVS:
Patch by: Kwang Yul Seo <kwangyul.seo gmail com>
* libs/gst/net/gstnettimepacket.h:
* docs/libs/gstreamer-libs-sections.txt:
Define socklen_t as int if it's not defined yet. Fixes compilation
with MSVC6 and other versions where socklen_t is not defined in
the windows headers (#518022).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
Add more functions for unit testing: gst_check_drop_buffers,
gst_check_caps_equal, gst_check_element_push_buffer_list,
gst_check_element_push_buffer
Original commit message from CVS:
* gst/gst.c:
_gst_trace_on is already provided by gsttrace.h, no need to declare
it ourselves.
* docs/libs/gstreamer-libs-sections.txt:
Add 'buffers', 'check_cond' and 'check_mutex' from libgstcheck
and remove strange tcase_add_test which is outputting a warning.
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
Properly declare 'buffers', 'check_cond', 'check_mutex' extern
and define them in gstcheck.c instead of having every .c file whcih
includes gstcheck.h be defining its own copy and relying on symbol
interposing to marry them all, which doesn't work on Solaris.
* tests/check/elements/identity.c: (GST_START_TEST):
Don't define 'buffers' locally, it comes from libgstcheck.
* tests/check/generic/sinks.c: (send_buffer):
Fix type of variable (GstFlowReturn, not GstStateChangeReturn)
* tests/check/gst/gststructure.c: (GST_START_TEST):
* tests/check/gst/gstsystemclock.c: (GST_START_TEST):
* tests/check/gst/gstutils.c: (GST_START_TEST):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Add a bunch of casts to make various constants fit the types
they're being assigned to.
Original commit message from CVS:
* docs/gst/.cvsignore:
* docs/libs/.cvsignore:
* docs/plugins/.cvsignore:
Ignore files generated by new common/* modifications
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_set_gap_aware):
* libs/gst/base/gstbasetransform.h:
API: Add gst_base_transform_set_gap_aware() to control whether
the element correctly handles GST_BUFFER_FLAG_GAP or shouldn't
get buffers with this flag at all. Fixes#503231.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_last_buffer), (gst_base_sink_set_last_buffer),
(gst_base_sink_get_property), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add a new last-buffer property that contains the last buffer used in
basesink for preroll or rendering. useful for making snapshots.
API: gst_base_sink_get_last_buffer()
API: GstBaseSink::last-buffer
Original commit message from CVS:
* docs/gst/Makefile.am:
* docs/libs/Makefile.am:
Remove cruft and do some cleanups.
* docs/gst/gstreamer-docs.sgml:
* docs/libs/gstreamer-libs-docs.sgml:
Prepare for comming gtkdoc features (rebase against online docs).
Original commit message from CVS:
* docs/libs/gstreamer-libs.types:
Don't register the enum type gst_lfo_waveform_get_type() in the
.types file - only GObject derived types belong.
