Let's not put every single mp3 frame in our index, a few frames per
second should be more than enough. For now use an index interval
of 100ms-500ms depending on the upstream size, to keep the index at
a reasonable size. Factor out the code that adds the index entry
into a separate function for better code readability.
While technically upstream may be seekable even if it doesn't know
the exact size, I can't think of a use case where this distincation
is relevant in practice, so for now just assume we're not seekable
if upstream doesn't provide us with a size. Makes sure we don't
build a seek index when streaming internet radio with sources that
pretend to be seekable until you try to actually seek.
Some Xing headers apparently start the TOC at byte 1 instead of 0. Don't
reject them because of it, just subtract the initial offset when reading
the table.
Be more lenient about what we accept as changing bits in a header - basically,
only require that the mp3 sync marker is present, for the mpeg version,
layer and samplerate.
Fixes: #581464
Some mp3 streams have an offset in timestamps, requiring us to push the
frame *AFTER* segment.stop in order for the decoder to be able to push
all data up to the segment.stop position.
Don't introduce glitches in the output by a) relaxing the threshold for
taking upstream timestamps in preference to our calculated timestamps and
b) only set the discont flag on outgoing buffers in response to an incoming
discont buffer.
Fixes: #575046
Don't allow a change in sample rate/channels/layer/version unless we can
see another frame at the correct offset. Prevents accidently flipping
due to simple single-bit corruption.
Since SEEK event handling might perform some conversion
from TIME to BYTES, do not let upstream fool application
into (TIME) seeking not being possible.
Integer underflow made accurate seeks to near zero fail and seek to
completely the wrong place. Fix by clamping to zero, since we can't seek
to negative times anyway.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (channel_mode_class),
(GST_TYPE_MP3_CHANNEL_MODE), (mp3_type_frame_length_from_header),
(gst_mp3parse_emit_frame), (mp3parse_get_query_types):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Do an initial class_ref on an internal enum type from within the
class_init function so that there aren't any issues when multiple
mp3parse elements are started in separate threads at the same
time. (Why we use an enum type here if the tag is registered as
a string type, I don't know). Also remove custom UNUSED macro
and use GLib's instead.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
Calculate samples per frame correctly for "MPEG 2.5" layer 3.
Fixes skipping on these files.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event):
Post a GST_ELEMENT_ERROR if we get EOS before seeing any valid
frames. Partially fixes bug #552237.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (gst_mp3parse_emit_frame),
(mp3parse_total_time), (mp3parse_bytepos_to_time):
Don't recurse from mp3parse_bytepos_to_time() to mp3parse_total_time()
if we're called from there already. Otherwise we end up in a endless
recursion and crash with a stack overflow.
This can happen when a Xing or VBRI header with TOC exists but it
doesn't contain the total time. Fixes bug #545370.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps):
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (mp3_caps_create),
(gst_mp3parse_chain):
Put the MPEG audio version into the caps as "mpegaudioversion".
This is different from "mpegversion".
Original commit message from CVS:
* docs/plugins/gst-plugins-ugly-plugins-docs.sgml:
* docs/plugins/gst-plugins-ugly-plugins-sections.txt:
* ext/a52dec/gsta52dec.c:
* ext/amrnb/amrnbdec.c:
* ext/amrnb/amrnbenc.c:
* ext/amrnb/amrnbparse.c:
* ext/lame/gstlame.c:
* ext/mad/gstmad.c:
* ext/sidplay/gstsiddec.cc:
* gst/asfdemux/gstrtspwms.c:
* gst/mpegaudioparse/gstxingmux.c:
* gst/realmedia/rademux.c:
* gst/realmedia/rdtmanager.c:
* gst/realmedia/rtspreal.c:
* gst/synaesthesia/gstsynaesthesia.c:
Add missing elements to docs. Restore alphabetical order in section
file. Document mad (it was included in docs already).
Fix doc-markup: use convinience syntax for examples
(produces valid docbook), add several refsec2 when we have several
titles. Fix some types.
Original commit message from CVS:
* ext/lame/gstlame.c:
* ext/sidplay/gstsiddec.cc:
* gst/mpegaudioparse/gstxingmux.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (head_check):
Don't mark MPEG headers with emphasis == 0x2 as invalid. This
emphasis value is reserved but unfortunately files with that
value exist and the information is not important for the decoder
anyway. Fixes bug #537235.
Original commit message from CVS:
* gst/mpegaudioparse/gstxingmux.c: (generate_xing_header):
Fix alignment issues that caused SIGBUS on some architectures.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
Send a new duration message if the average bitrate changed and
we don't know the duration from the Xing or VBRI header.
Fixes bug #321857.
Original commit message from CVS:
* configure.ac:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mpeg_audio_seek_entry_free):
* gst/mpegaudioparse/gstxingmux.c: (gst_xing_seek_entry_free):
Depend on GLib 2.12 and use it unconditionally as we do in other
modules too already.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mpeg_audio_seek_entry_new), (mpeg_audio_seek_entry_free),
(gst_mp3parse_reset), (gst_mp3parse_emit_frame):
* gst/mpegaudioparse/gstxingmux.c: (gst_xing_seek_entry_new),
(gst_xing_seek_entry_free), (gst_xing_mux_finalize), (xing_reset),
(gst_xing_mux_chain):
Use GSlice for allocating the seek table entries if we compile with
GLib 2.10 or newer.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event):
Don't take the stream lock when caching events. This is not necessary
and results in a deadlock when seeking with rhythmbox (but not with
totem or banshee for some reason).
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (gst_mp3parse_chain):
Remove trailing newlines from debug statements.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_sink_event):
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event):
Push EOS, FLUSH_STOP and NEWSEGMENT immediately instead
of dropping and leaking them.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_dispose), (gst_mad_sink_event),
(gst_mad_chain):
* ext/mad/gstmad.h:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_dispose),
(gst_mp3parse_sink_event), (gst_mp3parse_emit_frame):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Cache all events except EOS if we still have to send a NEWSEGMENT
event. This will let TAG events be forwarded until after decodebin
to an encoder for example as decodebin only links the pads
after NEWSEGMENT. Fixes bug #518933.
Original commit message from CVS:
* gst/mpegaudioparse/gstxingmux.c: (get_xing_offset):
Write Xing header at the correct position in the MP3 frame for
stereo files. Fixes bug #518676.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame), (gst_mp3parse_chain):
Try a bit harder to get valid timestamps, especially if upstream
gives us one and we are at the first frame or resyncing.
Return UNEXPECTED if we get a valid timestamp that is outside of
our configured segment. After all changes done so far this doesn't
seem to cause any regression, please test.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
Handler buffers without valid timestamp more correctly: Don't drop
them and don't use the invalid timestamp to calculate the next
timestamp. Fixes bug #516811.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
Return GST_FLOW_UNEXPECTED if we get data that is after our
configured segment. This makes upstream go EOS immediately instead
of sending us the complete stream. Also improve debugging a bit.
Original commit message from CVS:
* gst/mpegaudioparse/gstxingmux.c: (generate_xing_header):
Correctly write the size in bytes on big endian systems.
Fixes bug #515725.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:(mp3parse_time_to_bytepos):
Use gst_guint64_to_gdouble for conversion
* win32/vs6/libgstasfdemux.dsp:
* win32/vs6/libgstdvdsub.dsp:
* win32/vs6/libgstrealmedia.dsp:
Update project dependencies and add new source files
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3_caps_create),
(gst_mp3parse_chain):
Don't set new caps on the srcpad everytime the bitrate or MPEG
version changes but calculate new spf value when the MPEG version
changes.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* gst/xingheader/gstxingmux.c:
* gst/xingheader/gstxingmux.h:
Add documentation for the xingheader plugin.
* tests/check/elements/xingmux.c: (GST_START_TEST):
Set element state to PLAYING before doing something else.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/xingmux.c: (setup_xingmux),
(cleanup_xingmux), (GST_START_TEST), (xingmux_suite), (main):
* tests/check/elements/xingmux_testdata.h:
Add simple unit test for the xingmux element.
* gst/xingheader/gstxingmux.c: (generate_xing_header),
(gst_xing_mux_finalize), (xing_reset):
Fix a memleak and invalid seek tables with less than 100 MP3 frames.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
Interpolate the VBRI seek table entries to get better results,
support 3 byte seek table entries and prevent overflows in the
seek table by adding the relative offsets when using the seek
table in a large enough data type.
