Validate that fps numerator is non-zero so it can be used to calculate
the duration of the B frame.
Also it gst_util_uint64_scale() is used instead of normal arithmetic in
order to aviod overflows, underflows and loss of precision.
https://bugzilla.gnome.org/show_bug.cgi?id=768458
Change defaults for max-bframes, cabac, and dct8x8 to be enabled
by default. This will cause the default profile to be high instead
of baseline. In most situations this is the right decision, and
the profile can still be lowered in the case of caps restrictions.
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757941
This is a workaround since vaapi-intel-driver doesn't have
support for B-frame encode when utilizing low-power-enc
hardware block.
Fixme :We should query the VAConfigAttribEncMaxRefFrames
instead of blindly disabling b-frame support and set b/p frame count,
buffer pool size etc based on the query result.
https://bugzilla.gnome.org/show_bug.cgi?id=766050
Added a new property "low-power-enc" for enabling low power
encoding mode. Certain encoding tools may not be available
with the VAEntrypointEncSliceLP.
https://bugzilla.gnome.org/show_bug.cgi?id=766050
After setting the release flags, the compiler warns about a couple
initialized variables.
Also marked a couple of set variables as unused, because they are only
used for assertion.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
As gstreamer-vaapi now only supports from GStreamer 1.6, this patch removes
all the old GStreamer version guards.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
One buffering_period() SEI message shall be present in every IDR access unit
when NalHrdBpPresentFlag is inferred to be equal to 1. This is the case when we
use a non-CQP mode, e.g. CBR. In other words, when
nal_hrd_parameters_present_flag is set to 1.
One picture_timing() SEI messages shall be present in every access unit
if CpbDpbDelaysPresentFlag is equal to 1 or pic_struct_present_flag is equal to 1
https://bugzilla.gnome.org/show_bug.cgi?id=722734https://bugzilla.gnome.org/show_bug.cgi?id=751831
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
slice_type in slice_param is defined as (char *), but it is compared against a
signed integer. clang complains about this comparison.
This patch casts the variable.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
Add support for H.264 MVC Multiview High profile encoding with
more than 2 views. All views within the same accesss unit are
provided in increasing order of view order index (VOIdx).
Upto 10 view are supported for now.
A new property "view-ids" has been provided for the plugins to
set the view ids (which is an array of guint values) to be used
for mvc encoding.
https://bugzilla.gnome.org/show_bug.cgi?id=732453
Really report sample aspect ratio (SAR) as present, and make it match
what we have obtained from the user as pixel-aspect-ratio (PAR). i.e.
really make sure VUI parameter aspect_ratio_info_present_flag is set
to TRUE and that the indication from aspect_ratio_idc is Extended_SAR.
This is a leftover from git commit a12662f.
https://bugzilla.gnome.org/show_bug.cgi?id=740360
It is not necessary to periodically send SPS or subset SPS headers.
This is up to the upper layer (e.g. transport layer) to decide on
if/how to periodically submit those. For now, only generate new SPS
or subset SPS headers when the codec config changed.
Note: the upper layer could readily determine the config headers
(SPS/PPS) through the gst_vaapi_encoder_h264_get_codec_data() function.
https://bugzilla.gnome.org/show_bug.cgi?id=732083
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Report sample aspect ratio (SAR) as present, and make it match what
we have obtained from the user as pixel-aspect-ratio (PAR). i.e. the
VUI parameter aspect_ratio_info_present_flag now defaults to TRUE.
Set the value of num_anchor_refs_l0, num_anchor_refs_l1, num_non_anchor_refs_l0,
and num_non_anchor_refs_l1 to zero since the inter-view prediction is not yet
supported.
When the seq_parameter_set_data() syntax structure is present in a subset
sequence parameter set and vui_parameters_present_flag is equal to 1, then
timing_info_present_flag shall be equal to 0 (H.7.4.2.1.1).
Submit Prefix NAL headers (nal_unit_type = 14) before every packed
slice header (nal_unit_type = 1 or 5) only for the base view. In non
base views, a Coded Slice Extension NAL header (nal_unit_type = 20)
is required, with an appropriate nal_unit_header_mvc_extension() in
the NAL header bytes.
https://bugzilla.gnome.org/show_bug.cgi?id=732083
Exclusively use VA drivers that support raw packed headers for encoding.
i.e. simply submit packed headers Subset SPS and Prefix NAL units. This
provides for better compatibility accross the various VA drivers and HW
generations since no particular API is needed beyond what readily exists.
Since we are encoding each view independently from each other, we
need a higher number of pre-allocated surfaces to be used as the
reconstructed frames. For Stereo High profile encoding, this means
to effectively double the number of frames to be stored in the DPB.
Add initial support for Subset SPS, Prefix NAL and Slice Extension NAL
for non-base-view streams encoding, and the usual SPS, PPS and Slice
NALs for base-view encoding.
The H.264 Stereo High profile encoding mode will be turned on when the
"num-views" parameter is set to 2. The source (raw) YUV frames will be
considered as Left/Right view, alternatively.
Each of the two views has its own frames reordering pool and reference
frames list management system. Inter-view references are not supported
yet, so the views are encoded independently from each other.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
[limited to Stereo High profile per the definition of MAX_NUM_VIEWS]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Create structures to maintain the reference frames list (RefPool) and
frames reordering (ReorderPool) logic.
This is a prerequisite for H.264 MVC support.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Add provisions to write subset SPS headers to the bitstream in view
to supporting the H.264 MVC specification.
This assumes the libva "staging" branch is in use.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Make sure to configure the encoder with the set of packed headers we
intend to generate and submit. i.e. make selection of packed headers
to submit more robust.
Cache the first compatible GstVaapiProfile found if the encoder is not
configured yet. Next, factor out the code to check for the supported
rate-control modes by moving out vaGetConfigAttributes() to a separate
function, while also making sure that the attribute type is actually
supported by the encoder.
Also fix the default set of supported rate control modes to not the
"none" variant. It's totally useless to expose it at this point.
Don't emit NAL HRD parameters for now in the SPS headers because the
SEI buffering_period() and picture_timing() messages are not handled
yet. Some additional changes are necessary to get it right.
https://bugzilla.gnome.org/show_bug.cgi?id=722734
Fix default CPB buffer size to something more reasonable (1500 ms)
and that still fits the level limits. This is a non configurable
property for now. The initial CPB removal delay is also fixed to
750 ms.
https://bugzilla.gnome.org/show_bug.cgi?id=722087
Round down the calculated, or supplied, bitrate (kbps) into a multiple
of the HRD bitrate scale factor. Use a bitrate scale factor of 64 so
that to have less losses in precision. Likewise, don't round up because
that could be a strict constraint imposed by the user.
Fix the level calculation involving bitrate limits. Since we are
targetting NAL HRD conformance, the check against MaxBR from the
Table A-1 limits shall involve cpbBrNalFactor depending on the
active profile.
Submit sequence parameter buffers only once, or when the bitstream
was reconfigured in a way that requires such. Always submit packed
sequence parameter buffers at I-frame period, if the VA driver needs
those.
https://bugzilla.gnome.org/show_bug.cgi?id=722737
Make sure to submit the packed headers only if the underlying VA driver
requires those. Currently, only handle packed sequence and picture
headers.
https://bugzilla.gnome.org/show_bug.cgi?id=722737
