Olivier Crête
76679f9ae9
rtpssrcdemux: No need to explicitely forward the caps
...
They are forwarded with the other events
2013-04-02 23:42:41 -04:00
Olivier Crête
4ad8693f3c
rtpssrcdemux: Remove unused GstSegment
2013-04-02 23:42:41 -04:00
Olivier Crête
7293b0eff7
rtpssrcdemux: Simplify event forwarding
...
Use the gst_pad_forward() mechanic, this way we won't miss pads that are
added while we are pushing
2013-04-02 23:42:41 -04:00
Olivier Crête
f4c3aef13a
rtpssrcdemux: Don't cross the internal links
...
We had the wrong condition to check for the internal links, so RTP and RTCP
pads got crossed!
2013-04-02 23:42:41 -04:00
Paul HENRYS
10802cae73
rtpsession: Fix wrong code organisation in case of collision
...
change_ssrc field of RTPSession should be set before calling
rtp_session_schedule_bye_locked () as this function will call reconsider function
that will wake up rtcp_thread which will call rtp_session_on_timeout () that will
check change_ssrc to change the ssrc.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=694184
2013-02-22 09:28:07 +02:00
Wim Taymans
a61055809f
rtpsession: only delay RTCP when we are a sender
...
Only delay the RTCP thread when we are a sender, which we can know because we
have a send_rtp_src pad. Otherwise we might delay the RTCP thread if we
are only a receiver and then there is no code path that wakes up the
RTCP thread and we end up without RTCP packets.
2013-02-20 21:07:41 +02:00
Wim Taymans
2d5319c1fa
rtpsession: delay RTCP until first RTP packet
...
Delay sending the first RTCP packet until we have sent the first RTP packet.
Otherwise we will send out a Receiver Report instead of a sender report.
See https://bugzilla.gnome.org/show_bug.cgi?id=691400
2013-02-08 17:05:27 +01:00
Wim Taymans
2971ed44ee
rtpsession: remove dead code
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=668355
2013-02-07 15:06:40 +01:00
Paul HENRYS
0e91c949d8
rtpptdemux: forward sticky events and then set caps
...
When a new src pad is added, first forward the sticky events and then
set the caps on the src pad
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=692786
2013-02-07 14:38:20 +01:00
Markovtsev Vadim
7cebe2fc41
rtpjitterbuffer: improve debug output
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=688935
2013-02-07 14:32:26 +01:00
Wim Taymans
978cc9f538
rtpbin: rework cleanup of streams
...
Move the work of cleaning up the client streams in the free_stream
function. This allows us to properly clean up the client streams when we
remove an RTP stream as well.
Based on patch by Sujay <sdatar@cisco.com>
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=660156
2013-02-07 13:02:34 +01:00
Wim Taymans
c3077012c0
jitterbuffer: do skew estimation only for new timestamps
...
Only run the skew estimation code when we have a new RTP timestamp. If we have
the same RTP timestamp, we simply use the previous estimation. This works
because the new observation with the same RTP timestamp has to have a bigger
receiver time and is thus not going to influence the estimation except for
causing more jitter.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=640023
2013-02-06 17:15:11 +01:00
Wim Taymans
747447d298
rtpsession: avoid '...is used uninitialized'
2013-01-29 10:32:51 +01:00
Tim-Philipp Müller
629772f735
rtpmanager: use C89-style comments
2013-01-28 23:07:34 +00:00
Olivier Crête
451217c437
gstrtpsession: Fix double-declared variable
2013-01-28 18:06:15 -05:00
Olivier Crête
7300d489fe
rtp: Fix compilation errors in previous patches
2013-01-28 17:58:20 -05:00
Haakon Sporsheim
86c13ceae6
rtpsession: Ensure MT safe event handling and plug event leak.
...
https://bugzilla.gnome.org/show_bug.cgi?id=667826
2013-01-28 17:44:31 -05:00
Idar Tollefsen
268c998a32
rtpsession: mt-safe event-push
...
By taking a ref of the sink-pad under lock, it won't dissappear
while the push is taking place
https://bugzilla.gnome.org/show_bug.cgi?id=667816
2013-01-28 17:34:50 -05:00
Pascal Buhler
f459fe2673
rtpssrcdemux: Safely push on pads that might be removed due to a RTCP BYE
...
https://bugzilla.gnome.org/show_bug.cgi?id=667815
2013-01-28 17:01:27 -05:00
Wim Taymans
72402cc649
rtp: small improvements
2013-01-08 16:27:42 +01:00
Wim Taymans
af055d9574
jitterbuffer: refactor handle sync code
...
Move the code that combines the last SR packet and the current jitterbuffer sync
values into a sync structure, into its own function. We want to reuse this bit
later.
2013-01-07 15:50:33 +01:00
Wim Taymans
87f7d6b9bf
rtp: include downstream latency in SR calculations
...
When we make a mapping between an RTP timestamp and an NTP timestamp, include
the downstream latency applied to the sinks. This makes it possible to have
both sinks run with different latencies and still have correct sync on the
client. It also is more correct because the RTP timestamp in the SR report will
actually correspond more closely to the NTP time it was sent on the server.
For pipelines with high latency on the sender side, this actually allows a
GStreamer receiver to perform synchronisation instead of dropping the RTCP
packets.
2013-01-07 15:45:10 +01:00
Wim Taymans
c631ed3300
rtpsession: don't cast event functions
...
There is no need to cast the event functions and only causes problems later when
we change the signature later and things silently compiles wrong code.
2013-01-07 14:25:14 +01:00
Wim Taymans
8dcde8b3ea
rtp: more debug
2013-01-07 14:23:34 +01:00
Wim Taymans
6b7d05ac57
rtpsession: improve debug
2013-01-07 14:22:48 +01:00
Tim-Philipp Müller
8a3b116d1f
docs: add rtpmux and rtpdtmfmux to plugin docs
...
https://bugzilla.gnome.org/show_bug.cgi?id=629117
2012-12-16 16:36:39 +00:00
Tim-Philipp Müller
3295b5d791
rtpmanager: move rtpmux and rtpdtmfmux elements from -bad
...
https://bugzilla.gnome.org/show_bug.cgi?id=629117
2012-12-16 16:36:39 +00:00
Tim-Philipp Müller
de204ba754
rtpmux: Fix FSF address
...
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-12-16 16:36:39 +00:00
Tim-Philipp Müller
2778a1757f
rtpmux: Use gst_element_class_set_static_metadata()
...
where possible. Avoids some string copies. Also re-indent
some stuff. Also some indent fixes here and there.
2012-12-16 16:36:39 +00:00
Olivier Crête
15dfdc58d4
rtpmux: Misc fix for 0.11
...
Convert the incoming caps before proxying them
Clear the last_pad when going to ready
tests: Implement accept_caps, don't leak event
2012-12-16 16:36:38 +00:00
Wim Taymans
83262be703
rtpmux: update for RTP buffer api changes
2012-12-16 16:36:38 +00:00
Sebastian Dröge
f17064a8ea
rtpmux: Update for GST_PLUGIN_DEFINE() API changes
2012-12-16 16:36:34 +00:00
Wim Taymans
c86156ad8f
rtpmux: fix compilation
2012-12-16 16:35:36 +00:00
Wim Taymans
6826bbb6da
rtpmux: fix for caps api changes
2012-12-16 16:35:33 +00:00
Matej Knopp
bb345a584d
rtpmux: Fix compiler warnings
2012-12-16 16:35:29 +00:00
Olivier Crête
af4e999c59
rtpmux: Unref non-forwarded events
...
Also, don't unref forwarded ones
2012-12-16 16:35:29 +00:00
Olivier Crête
a8789d1df1
rtpmux: resync iterator on resync
2012-12-16 16:35:29 +00:00
Olivier Crête
0c54079af5
rtpmux: Re-push sticky events on input pad change
2012-12-16 16:35:29 +00:00
Olivier Crête
21831b430f
rtpmux: Don't leak gvalue from iterator
2012-12-16 16:35:29 +00:00
Wim Taymans
ccc4b960fc
rtpmux: more porting
2012-12-16 16:35:26 +00:00
Olivier Crête
f20a6b1d16
rtpmux: port to 0.11
2012-12-16 16:35:26 +00:00
Wim Taymans
35b6668fb6
rtpmux: make request pads take _%u
2012-12-16 16:35:22 +00:00
Olivier Crête
aa3607ef5c
rtpdtmfmux: Add last-stop to dtmf-event upstream events
...
Add the running time of the last outputted buffer to the
upstream "dtmf-event" events so that the dtmf source does not
leave a gap.
2012-12-16 16:35:22 +00:00
Edward Hervey
d137482fe5
rtpmux: Remove dead assignments
2012-12-16 16:35:22 +00:00
Stefan Kost
55aae6bfab
rtpmux: add missing G_PARAM_STATIC_STRINGS flags
...
Canonicalize property names as needed.
2012-12-16 16:35:15 +00:00
Olivier Crête
9674d5cc23
rtpmux: Improve documentation
...
Add an example pipeline, and try to explain a bit more what it does.
2012-12-16 16:35:15 +00:00
Stefan Kost
ca27a279ba
rtpdtmfmux: remove unused variable
2012-12-16 16:35:15 +00:00
Stefan Kost
c85dceeacb
rtpdtmfmux: remove unused signal boilerplate
2012-12-16 16:35:15 +00:00
Stefan Kost
2353f8d852
rtpmux: no need to ref pad in _chain()
2012-12-16 16:35:15 +00:00
Youness Alaoui
e42d2eebcb
rtpmux: Unlock the right mutex
...
The mutex locked is for the 'mux' object, but we unlock the
pad, which means that if the rtpmux gets a flush, then the
object lock will stay locked forever, causing it to freeze
the next time it tries to take it.
Fixes bug #627991
2012-12-16 16:35:15 +00:00
Olivier Crête
78d1ebac9e
rtpmux: Add support for GstBufferList
...
Factor out most of the buffer handling and implement a chain_list
function. Also, the DTMF muxer has been modified to just have a
function to accept or reject a buffer instead of having to subclass
both chain and chain_list.
2012-12-16 16:35:15 +00:00
Olivier Crête
c00f14419b
rtpmux: Don't leak invalid buffers
2012-12-16 16:35:15 +00:00
Tim-Philipp Müller
a45429d81d
rtpmux: fix missing debug log message argument
2012-12-16 16:35:15 +00:00
Olivier Crête
4a8d0243b5
rtpdtmfmux: Add some debug messages
2012-12-16 16:35:14 +00:00
Olivier Crête
423ce98666
rtpdtmfmux: Remove stream-lock event handling
2012-12-16 16:35:14 +00:00
Olivier Crête
a4500c0e74
rtpdtmfmux: Update doc for simplification
2012-12-16 16:35:14 +00:00
Olivier Crête
70097866de
rtpdtmfmux: Drop buffers on non-priority sinks when something is incoming on the priority sink
2012-12-16 16:35:14 +00:00
Olivier Crête
f6548fe9b6
rtpdtmfmux: Add priority sink pads
2012-12-16 16:35:14 +00:00
Olivier Crête
2bcea1537b
rtpdtmfmux: Cleanup event function
2012-12-16 16:35:14 +00:00
Olivier Crête
8e58646f5c
rtpmux: Aggregate incoming segments
2012-12-16 16:35:14 +00:00
Olivier Crête
7be57cac3a
rtpdtmfmux: Update documentation
2012-12-16 16:35:14 +00:00
Olivier Crête
e590fc1f32
rtpmux: Simplify request pad creation
2012-12-16 16:35:14 +00:00
Benjamin Otte
2867e00225
rtpmux: gst_element_class_set_details => gst_element_class_set_details_simple
2012-12-16 16:35:10 +00:00
unknown
fb7266884d
rtpmux: update the current_ssrc from the caps
...
Fixes #604101
2012-12-16 16:33:47 +00:00
Håvard Graff
eab65e84ca
rtpmux: release pads when disposing
...
Because of an allocated priv (GstRTPMuxPadPrivate), the element will
leak memory if not gst_rtp_mux_release_pad() is called. This would
previously only happen if release_request_pad() was called explicitly,
somthing that should not be neccesary.
Fixes #604099
2012-12-16 16:33:46 +00:00
Wim Taymans
0d54122804
dtmfmux: method name cleanups
2012-12-16 16:33:46 +00:00
Olivier Crête
3841cc74cf
rtpmux: Don't ignore requested pad name
2012-12-16 16:33:46 +00:00
Olivier Crête
d93295ff9d
rtpmux: Remove empty finalize
2012-12-16 16:33:46 +00:00
Olivier Crête
5e90a4e86b
rtpmux: Free the pad private data on pad release
...
Free the pad private data on pad release instead of using a weak ref,
which is not thread safe. Also, lock the content of the pad private using the element's
object lock.
2012-12-16 16:33:46 +00:00
Olivier Crête
4be63c9add
rtpmux: Reject wrong caps
2012-12-16 16:33:46 +00:00
Olivier Crête
0111bafb3a
rtpmux: Fix leak Fixed a leak discovered by Laurent Glayal <spegle@yahoo.fr>
2012-12-16 16:33:46 +00:00
Olivier Crête
fcc1522d2e
rtpmux: Fix leak
...
Fixed a leak discovered by Laurent Glayal <spegle@yahoo.fr>
2012-12-16 16:33:46 +00:00
Olivier Crête
ff6686f1c7
rtpmux: Fix warning
2012-12-16 16:33:46 +00:00
Olivier Crête
00791f930b
rtpmux: Set different caps depending on the input
2012-12-16 16:33:46 +00:00
Olivier Crête
ed0b407038
rtpmux: Only free pad private when pad is disposed
2012-12-16 16:33:45 +00:00
Olivier Crête
92bb5199ac
rtpmux: Remove useless caps mangling
2012-12-16 16:33:45 +00:00
Olivier Crête
3ccf3217fe
rtpmux: Rename variable for more clarity
2012-12-16 16:33:45 +00:00
Olivier Crête
4b958f6d8d
rtpmux: Use GST_BOILERPLATE
2012-12-16 16:33:45 +00:00
Olivier Crête
abe57be248
rtpmux: Do the includes locally
2012-12-16 16:33:45 +00:00
Olivier Crête
05844c89e9
rtpmux: Add GST_DEBUG_FUNCPTRs
2012-12-16 16:33:45 +00:00
Olivier Crête
fd102b95ab
rtpdtmfmux: Release locked pad on release_pad
...
Release the special pad if the pad is removed from the muxer.
2012-12-16 16:33:45 +00:00
Laurent Glayal
00f8bab712
rtpdtmfmux: Release special on pad dispose
...
Fixes #577690
2012-12-16 16:33:45 +00:00
Stefan Kost
a4a22454dc
docs: various doc fixes
...
No short-desc as we have them in the element details.
Also keep things (Makefile.am and sections.txt) sorted.
Reword ambigous returns. No text after since please.
2012-12-16 16:33:41 +00:00
Olivier Crête
7d4395a910
rtpmux: Move rtpmux from gst-plugins-farsight to -bad
2012-12-16 16:33:27 +00:00
Olivier Crête
68215752f4
rtpmux: Re-indent to Gst style
2012-12-16 16:33:24 +00:00
Olivier Crête
c7d0809434
rtpmux: Document rtp muxer a bit
2012-12-16 16:33:20 +00:00
Laurent Glayal
47c7a93df2
rtpmux: Add signals before stream lock and after unlocking
2012-12-16 16:33:17 +00:00
Olivier Crête
f1656ed8b0
rtpmux: Let ssrc through getcaps
2012-12-16 16:33:14 +00:00
Olivier Crête
1529dffaf9
rtpmux: Rename have_base to have_ts_base
2012-12-16 16:33:11 +00:00
Olivier Crête
57563517bd
rtpmux: Protect the seqnum with object lock in rtpmux
2012-12-16 16:33:08 +00:00
Olivier Crête
d3237eaf95
rtpmux: Remove unused sink_ts_base
2012-12-16 16:33:04 +00:00
Olivier Crête
cc23958183
rtpmux: Have getcaps to force the same clockrate on all pads
2012-12-16 16:33:01 +00:00
Olivier Crête
dc36590d0c
rtpmux: Validate RTP data in RTP Mux
2012-12-16 16:32:57 +00:00
Olivier Crête
360c8d4f1d
rtpmux: Remove unused clock-rate property
2012-12-16 16:32:54 +00:00
Olivier Crête
b86232d0dc
rtpmux: Clarify locking in rtpdtmfmux
2012-12-16 16:32:50 +00:00
Laurent Glayal
4b607cdda5
rtpmux: Missing format parameter
2012-12-16 16:32:47 +00:00
Håvard Graff
b313c80367
rtpmux: Update seqnum base in rtp muxer
...
With help from Wim
2012-12-16 16:32:43 +00:00
Håvard Graff
c479f90274
rtpmux: Fix some more leaks
2012-12-16 16:32:40 +00:00
Håvard Graff
1b5e769e0b
rtpmux: Fix leak
2012-12-16 16:32:37 +00:00
Olivier Crête
5cbb0de823
rtpmux: Don't unref caps we don't know (thanks Wim)
2012-12-16 16:32:32 +00:00
Olivier Crête
cebf506949
rtpmux: Put per-buffer debug at level LOG
2012-12-16 16:32:29 +00:00
Olivier Crête
3c12a423b7
rtpmux: Make debug print accurate
2012-12-16 16:32:25 +00:00
Olivier Crête
c49f4c87c6
rtpmux: Set our caps on the buffers
2012-12-16 16:32:22 +00:00
Olivier Crête
ec63da9366
rtpmux: Take the clock-base stored from the last setcaps
2012-12-16 16:32:18 +00:00
Olivier Crête
674c074114
rtpmux: Store the clock-base on setcaps
2012-12-16 16:32:15 +00:00
Olivier Crête
90264b9686
rtpmux: Add padprivate to the request pads
2012-12-16 16:32:11 +00:00
Olivier Crête
15d661ba3e
rtpmux: Make indentation more correct
2012-12-16 16:31:56 +00:00
Olivier Crête
3a7d09a749
rtpmux: Fix typo
2012-12-16 16:31:53 +00:00
Olivier Crête
91aef3ec5e
rtpmux: Set seqnum-base and clock-base in caps from rtpmuxer
2012-12-16 16:31:50 +00:00
Zeeshan Ali
6ea5ca354d
rtpmux: more debug
...
20070815135038-f3f1e-9c7a5490a525c6e8753cb1b8c03354df99132b5c.gz
2012-12-16 16:31:46 +00:00
Youness Alaoui
f0e209b638
rtpmux: missing comment
...
20070820185032-4f0f6-0ab67b6ac40dd4e35a8fe53f3cb6daff65ce43b9.gz
2012-12-16 16:30:33 +00:00
Olivier Crete
3ed5590da6
rtpmux: Make buffer writable before writing into it
...
20070712195336-3e2dc-91a5fb797cfa4919d4e2f9a728c6d6fbd3b83d93.gz
2012-12-16 16:30:31 +00:00
Olivier Crete
dd13f7c8ef
rtpmux: Set pads active when adding them to a potentially running element
...
20070706202459-3e2dc-a3731f885725594def0a7be997fc7b3a739ee967.gz
2012-12-16 16:30:27 +00:00
Olivier Crete
1c5075f927
rtpmux: Fix multiple ref leaks (patches by SP GLE)
...
20070607120121-3e2dc-061e9ef7a47b1b84fa8f8092f4b8bcc0e6db8c8c.gz
2012-12-16 16:30:23 +00:00
Zeeshan Ali
42f455e902
rtpmux: send event to all src pads
...
20070528152505-f3f1e-039216c73dc93f64c49962c77a0253cb9cfec4d3.gz
2012-12-16 16:30:18 +00:00
Zeeshan Ali
dba101bb0f
rtpmux: print a warning if receive an error iterating sinkpads
...
20070528123749-f3f1e-4c1eb3f511b5610143610a65a94d117f2c3d2580.gz
2012-12-16 16:30:15 +00:00
Zeeshan Ali
baa48dc6bc
rtpmux: deal with all the gst_iterator_next() return values
...
20070528122808-f3f1e-d301644c3be7633ec6dc5e28596e9346d2da6a50.gz
2012-12-16 16:30:12 +00:00
Zeeshan Ali
de40874670
rtpmux: Return correct value from the event handler
...
20070525123116-f3f1e-131b37b5f4521618fe2f1320409a47e65b35ad2d.gz
2012-12-16 16:30:08 +00:00
Zeeshan Ali
ed76f67e96
rtpmux: Ville's original patch to fix the traversal of dtmf event
...
20070525102709-f3f1e-6c41d1ef934068a4f4e810e7e981b420075b0c98.gz
2012-12-16 16:30:05 +00:00
zeeshan.ali@nokia.com
94ebe07862
rtpmux: Set the correct ts-offset on the get_prop value
...
20070329135250-65035-a43e222d91d57c0a61cb3287586aaa29abf78674.gz
2012-12-16 16:30:01 +00:00
zeeshan.ali@nokia.com
1ee542c378
rtpmux: Refactorize state_change
...
20070329135223-65035-23a0107b2e397710f035c6e88cc0e49b65bb4d5d.gz
2012-12-16 16:29:58 +00:00
zeeshan.ali@nokia.com
2498ba671a
rtpmux: set SSRC on the packets
...
20070329133622-65035-1be6e0aa85a71389f7d257b9cd3e13a73d6b745b.gz
2012-12-16 16:29:55 +00:00
zeeshan.ali@nokia.com
ee69c2690d
rtpmux: Code clean-up and more debug output
...
20070329131936-65035-9d499e209e0d7a409c3aa0d1040778babf076179.gz
2012-12-16 16:29:52 +00:00
zeeshan.ali@nokia.com
1c799ce964
rtpmux: Use own clock-base
...
20070328112219-65035-1ba5fefbc65059e9b0c860528a31062ceb6a7331.gz
2012-12-16 16:29:48 +00:00
zeeshan.ali@nokia.com
b04630d7a2
rtpmux: Only accept RTP streams that have the same clock-rate
...
20070323163139-65035-fc0b17b0b8a7a041f48994c4f26e96568168bf95.gz
2012-12-16 16:29:45 +00:00
zeeshan.ali@nokia.com
6fe1e02efd
rtpmux: Some more code-cleanups
...
20070322161552-65035-bda96165e146b4f1d5fea1cc9576a7ab3abebc9e.gz
2012-12-16 16:29:42 +00:00
zeeshan.ali@nokia.com
1603223ee5
rtpmux: return newpad instead of NULL and warn if failed to create a pad
...
20070322154251-65035-cdb6651e61c2eb0205cc8c24693b43f98a2da718.gz
2012-12-16 16:29:38 +00:00
zeeshan.ali@nokia.com
23d3ed5c5f
rtpmux: Refactorize the RTPMux code
...
20070322124132-65035-0a3278147546e33f687097a43b775b3f6aa99f93.gz
2012-12-16 16:29:35 +00:00
zeeshan.ali@nokia.com
21e6e951f6
rtpmux: Some more doc fixing
...
20070322121453-65035-12d602272217b51bd97df4e5790024c399622dd3.gz
2012-12-16 16:29:32 +00:00
zeeshan.ali@nokia.com
0de7fb6f37
rtpmux: More Refactoring
...
20070322113228-65035-bae34a79599e7de5293ed77b022361ccff822bb9.gz
2012-12-16 16:29:29 +00:00
zeeshan.ali@nokia.com
0f755657ce
rtpmux: More documentation
...
20070322113154-65035-624850541a5b5fc3df231204be5a83d07239db28.gz
2012-12-16 16:29:26 +00:00
zeeshan.ali@nokia.com
5483c78ac0
rtpmux: Refactor the event handler function
...
20070321163311-65035-987e7f25d1ab5335b79f44b277abf15e4e37d317.gz
2012-12-16 16:29:23 +00:00
zeeshan.ali@nokia.com
db1523ae60
rtpmux: Add RTPDTMFMux element
...
20070321145244-65035-9a01390b0dee3398e53199a1fa1d9352004f338e.gz
2012-12-16 16:29:19 +00:00
zeeshan.ali@nokia.com
97ff54dce7
rtpmux: Remove DTMF-specific code from RTP muxer and make it extendable
...
20070321123149-65035-b8a8f55ff78eed8cbb0042e827885edfc5438242.gz
2012-12-16 16:29:16 +00:00
zeeshan.ali@nokia.com
1a227ac7e5
rtpmux: Put more helpful description
...
20070320120524-65035-db27a7cf6307b511aeb3d996d26e790e367a7bad.gz
2012-12-16 16:29:13 +00:00
zeeshan.ali@nokia.com
d876c0d8cc
rtpmux: remove the (commented-out) code for blocking the pads
...
20070316151641-65035-0123af387951f88594797c722e882cfe70240aff.gz
2012-12-16 16:29:10 +00:00
zeeshan.ali@nokia.com
209228c44d
rtpmux: Drop buffers instead of blocking the sinkpads
...
20070316131444-65035-9c1345ad96108881f455d4b55a7f623cd302d0ed.gz
2012-12-16 16:29:05 +00:00
zeeshan.ali@nokia.com
795822ffa5
rtpmux: Implement stream locking, needed for DTMF
...
20070314171618-65035-e4d24b1606ce0a3e2e739f01833f61e4d7555eac.gz
2012-12-16 16:29:02 +00:00
zeeshan.ali@nokia.com
fd209faa56
rtpmux: use GST_*_OBJECT instead of g_*
...
20070314102058-65035-e2442888f2e3e5a3a7659ad7954a4fba34749ce2.gz
2012-12-16 16:28:58 +00:00
zeeshan.ali@nokia.com
b0208cb0a6
rtpmux: No need to manage pads, parent does that for us
...
20070314101854-65035-ef5f4abde227102a1128835ab325905eae4c3726.gz
2012-12-16 16:28:55 +00:00
zeenix@gmail.com
74e9071dad
rtpmux: Fix copyright header
...
20070314090358-d014a-3a6d3eeeaaf5cb8ca3bca6a33e99a551f598bd48.gz
2012-12-16 16:28:51 +00:00
zeeshan.ali@nokia.com
3c4cdf1541
rtpmux: The first implementation of RTP muxer
...
20070307085307-65035-833402413f99cb3f8be4883e92bad4c8722510c9.gz
2012-12-16 16:28:41 +00:00
Havard Graff
9c94f1187c
jitterbuffer: bundle together late lost-events
...
The scenario where you have a gap in a steady flow of packets of
say 10 seconds (500 packets of with duration of 20ms), the jitterbuffer
will idle up until it receives the first buffer after the gap, but will
then go on to produce 499 lost-events, to "cover up" the gap.
Now this is obviously wrong, since the last possible time for the earliest
lost-events to be played out has obviously expired, but the fact that
the jitterbuffer has a "length", represented with its own latency combined
with the total latency downstream, allows for covering up at least some
of this gap.
So in the case of the "length" being 200ms, while having received packet
500, the jitterbuffer should still create a timeout for packet 491, which
will have its time expire at 10,02 seconds, specially since it might
actually arrive in time! But obviously, waiting for packet 100, that had
its time expire at 2 seconds, (remembering that the current time is 10)
is useless...
The patch will create one "big" lost-event for the first 490 packets,
and then go on to create single ones if they can reach their
playout deadline.
See https://bugzilla.gnome.org/show_bug.cgi?id=667838
2012-12-13 12:00:43 +01:00
Wim Taymans
c755af0cb0
rtpsource: protect against invalid RTP packets
2012-11-12 11:18:30 +01:00
Tim-Philipp Müller
230cf41cc9
Fix FSF address
...
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:07:18 +00:00
Wim Taymans
d5fd524a0c
rtsession: fix compiler warning
2012-10-17 13:55:45 +02:00
Wim Taymans
26a21e85e2
rtpbin: clarify the ntp-sync option
2012-10-17 13:35:07 +02:00
Wim Taymans
f17db5c4ed
rtpsession: update caps in the source
...
Inform the source when caps changed. This was removed in the port to 1.0
leaving the source unaware of the clock-rate and unable to interpollate
rtp timestamps for SR packets.
2012-10-17 13:22:40 +02:00
Wim Taymans
f4eef3f48d
rtpbin: set PTS and DTS in jitterbufffer
2012-10-17 12:46:32 +02:00
Wim Taymans
796c1d8029
rtpbin: disable check for ntp-sync
...
Disable the check for the ntp-sync method. It is expected that
a rather larger offset needs to be applied with this method.
2012-10-17 12:27:03 +02:00
Wim Taymans
1cebcfa8c2
rtpbin: use running-time for NTP time
...
When use-pipeline-clock is set, use the running-time of the
pipeline to calculate the NTP timestamps. This method would previously
only work when the base-time is set to 0 but with this change it can
also work with different offsets and we can also implement pause/resume
of the sender and receiver now.
2012-10-17 12:26:05 +02:00
Wim Taymans
5b394385b9
session: also stop probatation on existing sources
...
Receiving an RTCP packet should also stop probation on sources we have seen
before.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=683065
2012-08-30 22:07:24 +02:00
Aleix Conchillo Flaque
4a200b670f
rtp: make rtp packet probation configurable (bug #682512 )
2012-08-30 21:49:57 +02:00
Tim-Philipp Müller
4bb52bbadf
docs: gst-launch -> gst-launch-1.0 and ffmpegcolorspace -> videoconvert
2012-08-27 21:20:30 +01:00
Aleix Conchillo Flaque
8d864dbbfc
rtspsrc: make jitterbuffer drop-on-latency available ( fix #682055 )
...
Conflicts:
gst/rtsp/gstrtspsrc.h
2012-08-22 10:39:19 +02:00
Tim-Philipp Müller
787c314ec3
Silence some 'variable may be used uninitialized' compiler warnings
...
When compiling with -DG_DISABLE_ASSERT
2012-08-08 11:31:59 +01:00
Olivier Crête
2e21ace12c
rtpssrcdemux: Block pad while it is announced.
...
Block the RTP pad and associated RTCP pads while they are being
announced. This it to prevent a race where one is announced and
before the callback has connected it, the other one gets a buffer.
We can't use the "padlock" of ssrcdemux because it causes deadlocks.
2012-08-06 18:04:58 -07:00
Olivier Crête
2aa360c936
rtpssrcdemux: Release lock before signalling new pad
...
This prevents a deadlock where something would try to push an event
through the SSRC demux from the callback, causing the pads to be iterated
and the lock taken.
2012-08-04 18:14:28 -07:00
Wim Taymans
51371d26ee
update for RTP buffer api changes
2012-07-17 16:38:27 +02:00
Tim-Philipp Müller
c22268b5d3
rtpsession: remove deprecated and unused "ntp-ns-base" property
2012-07-06 13:16:00 +01:00
Wim Taymans
30d3dfee36
update for task api change
2012-06-20 10:33:42 +02:00
Wim Taymans
dc04908412
update for clock api changes
2012-06-20 10:01:57 +02:00
Pascal Buhler
8161daef4a
rtpsession: creation should be signaled before validation
...
https://bugzilla.gnome.org/show_bug.cgi?id=667850
2012-05-09 10:36:18 +02:00
Tim-Philipp Müller
e09ae5736d
Use new gst_element_class_set_static_metadata()
2012-04-10 00:51:41 +01:00
Sebastian Dröge
aa2cd462da
gst: Update for GST_PLUGIN_DEFINE() API changes
2012-04-05 17:36:38 +02:00
Sebastian Dröge
5cdd49bf25
gst: Update versioning
2012-04-04 14:37:47 +02:00
Mark Nauwelaerts
a34cbc7637
rtpbin: fix some lock management
...
... to avoid trying to take a non-recursive lock twice.
2012-03-26 18:38:34 +02:00
Wim Taymans
7f3a00decd
jitterbuffer: reply FALSe on serialized queries
2012-03-14 15:45:38 +01:00
Wim Taymans
af59f573b5
rtpsession: don't leak the address
2012-03-13 19:26:47 +01:00
Wim Taymans
b5f1969406
rtpbin: improve cleanup
...
Reuse cleanup methods to make sure we remove all pads correctly
2012-03-07 15:22:36 +01:00
Wim Taymans
9942d3566e
rtpsession: set caps without the lock
...
Release the lock before setting the caps on the srcpad, which triggers an event,
which could eventually call back into us and cause a deadlock.
2012-03-07 15:02:44 +01:00
Wim Taymans
5cce960baa
ptdemux: set caps after activating the pad
...
Set the caps after we activated the pad or else it will just fail.
2012-03-07 15:02:44 +01:00
Mark Nauwelaerts
f189f62b13
Merge branch 'master' into 0.11
...
Conflicts:
ext/wavpack/gstwavpackenc.c
tests/check/elements/audioiirfilter.c
tests/examples/v4l2/probe.c
2012-03-01 11:29:50 +01:00
Edward Hervey
9beda57c3a
Suppress deprecation warnings in selected files, for g_value_array_* mostly
2012-02-27 14:47:25 +01:00
Tim-Philipp Müller
979431c034
rtpjitterbuffer: declare variables at the beginning of the block
...
It's how we roll. Fixes 'ISO C90 forbids mixed declarations and code'
compiler warning.
2012-02-16 11:21:28 +00:00
Wim Taymans
225e98d623
Merge branch 'master' into 0.11
...
Conflicts:
ext/flac/gstflacenc.c
ext/jack/gstjackaudioclient.c
ext/jack/gstjackaudiosink.c
ext/jack/gstjackaudiosrc.c
ext/pulse/plugin.c
ext/shout2/gstshout2.c
gst/matroska/matroska-mux.c
gst/rtp/gstrtph264pay.c
2012-02-10 16:23:14 +01:00
Wim Taymans
9365f12d6e
GST_FLOW_WRONG_STATE -> GST_FLOW_FLUSHING
2012-02-08 16:43:30 +01:00
Wim Taymans
ed8c0b7f63
jitterbuffer: fix caps after pt change
2012-02-06 09:23:07 +01:00
Wim Taymans
c94c06530e
jitterbuffer: fix caps leak
2012-02-06 09:18:17 +01:00
Tim-Philipp Müller
0f3b7b010e
build: ignore GValueArray deprecation warnings for the time being
...
until this gets sorted out with the GLib folks and we have a
viable alternative.
https://bugzilla.gnome.org/show_bug.cgi?id=667228
2012-02-01 16:40:51 +00:00
Olivier Crête
87f2088303
rtpjitterbuffer: Don't leak caps event when not pushing
2012-01-27 19:05:24 +01:00
Olivier Crête
33a6d1921f
rtpptdemux: Forward sticky events
2012-01-27 19:05:24 +01:00
Olivier Crête
7b1f8cb8f0
rtpptdemux: Protect all uses pad list with OBJECT LOCK
...
Actually protect the entire pad list and use it in a thread safe
way.
2012-01-27 19:05:24 +01:00
Olivier Crête
b3f5cdd1f9
rtpssrcdemux: Forward sticky events to new pads
2012-01-27 19:05:24 +01:00
Olivier Crête
76c93af537
rtpssrcdemux: Add ssrc to forwarded CAPS events
...
Also iterate the list of GstRtpSsrcDemuxPad safely
2012-01-27 19:05:23 +01:00
Olivier Crête
3285c45dbc
rtpssrccdemux: Factor out getting dpad by pad
2012-01-27 19:05:23 +01:00
Olivier Crête
b850741430
rtpsession: Keep the buffer mapped while it is being modified
2012-01-27 19:05:23 +01:00
Olivier Crête
aeec2d5f7e
rtpsession: Initialise the address pointer to NULL
2012-01-27 19:05:23 +01:00
Tim-Philipp Müller
5525e40970
rtpmanager: don't pretend our random hostnames are fully-qualified domain names
2012-01-25 13:19:12 +00:00
Sebastian Dröge
0b517ce9fb
Merge branch '0.11' of ssh://git.freedesktop.org/git/gstreamer/gst-plugins-good into 0.11
2012-01-25 12:49:34 +01:00
Sebastian Dröge
10554b271f
Merge branch 'master' into 0.11
...
Conflicts:
ext/flac/gstflacdec.c
ext/jpeg/gstjpegenc.c
ext/pulse/pulsesink.c
sys/v4l2/gstv4l2src.c
2012-01-25 12:49:11 +01:00
Wim Taymans
b4630dd3e0
more memory API porting
2012-01-25 12:30:29 +01:00
Tim-Philipp Müller
a476d529d2
rtpmanager: don't reveal the user's username, hostname or real name by default
...
Send a randomly made-up user@hostname as CNAME and don't
send a NAME at all by default.
https://bugzilla.gnome.org/show_bug.cgi?id=668320
2012-01-23 13:47:08 +00:00
Tim-Philipp Müller
7cb9b7ab9d
Use new GLib API unconditionally
2012-01-22 23:15:19 +00:00
Mark Nauwelaerts
eff88a239f
rtpbin: arrange for initialized variables
2012-01-20 17:10:51 +01:00
Wim Taymans
1584806634
port to new gthread API
2012-01-19 11:33:53 +01:00
Sebastian Dröge
cb789e32ad
rtpmanager: Port to GIO
2012-01-17 13:08:42 +01:00
Tim-Philipp Müller
f10e8192fa
rtpptdemux: plug pad leak in error code path
...
Based on patch by: Stig Sandnes <stig.sandnes@cisco.com>
Don't leak srcpad if there are no caps.
https://bugzilla.gnome.org/show_bug.cgi?id=667820
2012-01-13 11:02:24 +00:00
Vincent Penquerc'h
654a04f90c
gstrtpssrcdemux: fix element leak
2012-01-12 18:23:42 +00:00
Sebastian Dröge
93e3ed5a86
Merge branch 'master' into 0.11
...
Conflicts:
ext/cairo/gsttextoverlay.c
ext/pulse/pulseaudiosink.c
gst/audioparsers/gstaacparse.c
gst/avi/gstavimux.c
gst/flv/gstflvmux.c
gst/interleave/interleave.c
gst/isomp4/gstqtmux.c
gst/matroska/matroska-demux.c
gst/matroska/matroska-mux.c
gst/matroska/matroska-mux.h
gst/matroska/matroska-read-common.c
gst/multifile/gstmultifilesink.c
gst/multipart/multipartmux.c
gst/shapewipe/gstshapewipe.c
gst/smpte/gstsmpte.c
gst/udp/gstmultiudpsink.c
gst/videobox/gstvideobox.c
gst/videocrop/gstaspectratiocrop.c
gst/videomixer/videomixer.c
gst/videomixer/videomixer2.c
gst/wavparse/gstwavparse.c
po/ja.po
po/lv.po
po/sr.po
tests/check/Makefile.am
tests/check/elements/qtmux.c
tests/check/elements/rgvolume.c
2012-01-10 14:32:32 +01:00
Wim Taymans
5fd2b7abe3
GST_FLOW_UNEXPECTED -> GST_FLOW_EOS
2012-01-03 15:26:21 +01:00
Tim-Philipp Müller
b8b8454bcb
Suppress deprecation warnings in selected files, for g_static_rec_mutex_* mostly
...
GStaticRecMutex is part of our API/ABI, not much we can do here
in 0.10 for most of these.
2011-12-12 09:46:27 +00:00
Tim-Philipp Müller
330d984288
Use g_thread_try_new() instead of g_thread_crate() with newer glib versions
2011-12-12 09:46:27 +00:00
Tim-Philipp Müller
66f6e12888
Work around deprecated thread API in glib master
...
Add private replacements for deprecated functions such as
g_mutex_new(), g_mutex_free(), g_cond_new() etc., mostly
to avoid the deprecation warnings. We'll change these
over to the new API once we depend on glib >= 2.32.
2011-12-12 09:46:27 +00:00
Wim Taymans
9e27b122d9
ssrcdemux: fix iterator and caps
2011-12-10 11:13:38 +01:00
Wim Taymans
da980884dd
rtpsession: forward the caps event
2011-12-10 11:13:38 +01:00
Wim Taymans
a705b2ec17
jitterbuffer: simply forward the caps event
...
forward the caps event we get as input instead of making a new event etc..
2011-12-10 11:13:38 +01:00
Wim Taymans
68588c3f18
rtpsession: forward caps
2011-12-10 11:13:38 +01:00
Wim Taymans
6ac5e1ae16
rtp: pass parent to setcaps methods
2011-12-10 11:13:38 +01:00
Wim Taymans
439e2f1cfd
rtp: fix marshallers
...
Remove custom marshallers for minobject.
Init RTCP buffer correctly.
Handle results from setcaps
Remove asserts.
2011-12-09 10:51:14 +01:00
Edward Hervey
86a57e3546
rtpmanager: Initialize GstRTPBuffer before usage
2011-12-05 18:40:12 +01:00
Wim Taymans
71b615515a
update for clock provider API change
2011-11-28 17:52:06 +01:00
Vincent Penquerc'h
c0e101e93f
various: fix pad template leaks
...
https://bugzilla.gnome.org/show_bug.cgi?id=662664
2011-11-28 13:30:27 +00:00
Tim-Philipp Müller
09ca5fa910
rtpmanager: rename gstrtp* -> rtp*
...
This was done in 0.10 to avoid conflict with the rtp elements in
farsight, but the gst-prefixing is no longer needed in 0.11
2011-11-24 00:54:08 +00:00
Matej Knopp
1e5dd9e315
Fix printf format compiler warnings on OS X / 64bit
...
https://bugzilla.gnome.org/show_bug.cgi?id=662615
2011-11-22 01:28:22 +00:00
Wim Taymans
f8e988a94c
update for activation changes
2011-11-21 13:37:01 +01:00
Wim Taymans
b7aa7bca52
add parent to activate functions
2011-11-18 13:57:20 +01:00
Wim Taymans
07cc855b24
Merge branch 'master' into 0.11
...
Conflicts:
ext/speex/gstspeexenc.c
gst/rtpmanager/rtpsession.c
2011-11-17 17:17:11 +01:00
Wim Taymans
105650127e
add parent to pad functions
2011-11-17 15:02:55 +01:00
Wim Taymans
7cc4b72550
add parent to internal links
2011-11-16 17:54:49 +01:00
Wim Taymans
6190312214
add parent to query function
2011-11-16 17:27:13 +01:00
Wim Taymans
797523efbd
_peer_get_caps() -> _peer_query_caps()
2011-11-15 18:04:44 +01:00
Wim Taymans
75dc9634eb
change getcaps to query
...
Chain up event function in payloaders.
2011-11-15 18:04:44 +01:00
Olivier Crête
1169bb05af
gstrtpsession: Add special mode to use FIR as repair as Google does
...
https://bugzilla.gnome.org/show_bug.cgi?id=658419
2011-11-14 12:26:27 +01:00
Olivier Crête
79a9564c68
rtpsession: Send FIR requests in response to key unit requests with all-headers=TRUE
...
https://bugzilla.gnome.org/show_bug.cgi?id=658419
2011-11-14 12:26:27 +01:00
Olivier Crête
12a6b9613b
rtpsession: Put the PLI requests in each RTPSource
...
Also refactor a bit and put all the keyframe request code in one
place inside rtpsession.c
https://bugzilla.gnome.org/show_bug.cgi?id=658419
2011-11-14 12:26:27 +01:00
Olivier Crête
59c028a4ce
rtpsession: Hack to FIR because Google doesn't set the sender ssrc correctly
...
https://bugzilla.gnome.org/show_bug.cgi?id=658419
2011-11-14 12:26:27 +01:00
Olivier Crête
0ad78db0a3
rtpsession: Process received Full Intra Requests
...
Process FIR requests according to RFC 5104
https://bugzilla.gnome.org/show_bug.cgi?id=658419
2011-11-14 12:26:27 +01:00
Wim Taymans
a19a4a69ae
more template fixes
2011-11-04 13:12:37 +01:00
Wim Taymans
a95acb7122
make %u in all request pad templates
2011-11-04 11:58:22 +01:00
Wim Taymans
6cbd6afc0b
update for new net library
2011-11-03 16:43:00 +01:00
Wim Taymans
83ccefb24e
update for netbuffer api change
2011-11-02 09:06:38 +01:00
Wim Taymans
75e0c6052f
update for netaddress change
2011-11-02 09:06:38 +01:00
Wim Taymans
9a8a8e72c8
structure: fix for api update
2011-11-02 09:06:37 +01:00
Wim Taymans
161310fa23
bufferlist: update for new API
2011-11-02 09:06:37 +01:00
Tim-Philipp Müller
d18a578ba4
rtpmanager, v4l2: fix compiler warnings after gst_caps_new_simple() change
2011-10-28 09:06:41 +01:00
Wim Taymans
fc4684f4c6
fix compilation
2011-10-27 16:03:17 +02:00
Edward Hervey
d4a2a46606
rtpssrcdemux: Fix wrong usage of gst_iterator_filter
...
It takes a GValue* as the user_data.
And don't forget to unref the demuxer before returning.
2011-10-13 09:34:04 +02:00
Wim Taymans
87fbd1e784
Merge branch 'master' into 0.11
...
Conflicts:
common
ext/pulse/pulsesink.c
ext/soup/gstsouphttpclientsink.c
gst/audioparsers/gstaacparse.c
gst/audioparsers/gstac3parse.c
gst/rtp/gstrtph264depay.c
gst/rtpmanager/gstrtpjitterbuffer.c
gst/rtpmanager/rtpjitterbuffer.c
gst/rtsp/gstrtspsrc.c
sys/ximage/gstximagesrc.c
2011-09-28 12:44:59 +02:00
Ha Nguyen
931020158e
rtpbin: Fix a leaked clock for each buffering message
...
Fixes bug #659237 .
2011-09-19 14:05:26 +02:00
Mark Nauwelaerts
e2179cbb74
rtpsession: avoid source premature timing out
...
Use slightly adjusted sender interval to determine sender timeout rather than
our own sender side interval (which may have been forced small).
2011-09-19 11:56:44 +02:00
Mark Nauwelaerts
f65d4c8300
rtpsession: avoid timing out source too quickly
...
... following a PAUSE/PLAY cycle, particularly applicable when operating
with a short RTCP interval (possibly forced so server-side).
2011-09-19 11:56:44 +02:00
Mark Nauwelaerts
77ebd33991
rtpjitterbuffer/rtpbin: relax dropping rtcp packets
...
... to at least having it trigger a/v synchronization, possibly without
using provided values which are still not considered sane
(as previously dropped).
2011-09-19 11:56:44 +02:00
Mark Nauwelaerts
adfe7d0467
rtpjitterbuffer: some more reset when clearing pt map
...
... which in particular caters for some more reset following a possible
rtsp PLAY.
2011-09-19 11:56:44 +02:00
Mark Nauwelaerts
915db26029
rtpjitterbuffer: only reset skew on gap if input ts available
2011-09-19 11:56:44 +02:00
Mark Nauwelaerts
1e17e10f75
rtpjitterbuffer: check some more for possible rtp timestamp discontinuity
...
... when operating in non slave mode, and reset if detected.
This should avoid some (large) bogus outgoing timestamp due to jumps
in rtp time, as result of PAUSE/PLAY or seek or ...
2011-09-19 11:56:40 +02:00
Mark Nauwelaerts
9c95072048
rtpbin: alternative inter-stream syncing methods
...
... at least if not syncing to NPT time:
* either sync using RTCP SR data (as currently)
* only perform the above once using initial RTCP SR packets
* discard RTCP and sync by equating provided stream's clock-base rtptime,
as provided by jitterbuffer (typically obtained from RTP-Info in RTSP).
2011-09-19 11:52:03 +02:00
Mark Nauwelaerts
4b7301e4d1
rtpjitterbuffer: also provide clock-base to sync signal
2011-09-19 11:52:00 +02:00
Mark Nauwelaerts
f29c253934
rtpbin: allow configurable rtcp stream syncing interval
...
... rather than necessarily syncing at each RTCP SR.
2011-09-19 11:51:57 +02:00
Mark Nauwelaerts
afd26f0078
rtpsession: trigger reconsideration if rtcp interval set
2011-09-19 11:51:50 +02:00
Wim Taymans
33f18b8ea4
Merge branch 'master' into 0.11
...
Conflicts:
gst/audioparsers/gstamrparse.c
gst/isomp4/qtdemux.c
2011-09-06 16:06:25 +02:00
Olivier Crête
b2e8362767
rtpsession: Initialise the last_keyframe_request variable
2011-09-02 19:24:46 -04:00
Wim Taymans
4121021bb2
Merge branch 'master' into 0.11
...
Conflicts:
ext/pulse/pulsesink.c
ext/pulse/pulsesrc.c
gst/audioparsers/gstac3parse.c
gst/rtp/gstrtph264depay.c
gst/rtp/gstrtph264pay.c
gst/rtpmanager/gstrtpssrcdemux.c
2011-08-03 18:25:30 +02:00
Mark Nauwelaerts
c03648c8bb
rtpsession: properly init rtcp_min_interval
2011-07-29 12:08:42 +02:00
Mark Nauwelaerts
3a98f6f0fd
rtpssrcdemux: keep a ref on the src pad while using it
...
Prevent a possible race if clear_ssrc() is called between getting the pad and
doing the push.
Based on patch by <olivier.crete@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=650916
2011-07-28 14:51:01 +02:00
Olivier Crête
c7b9b98648
rtpssrcdemux: Make the pads lock recursive and hold it across the signal emit
...
We need to keep the lock held because we don't want a push before the "new-ssrc-pad"
handler has completed. But we may want to push an event from inside that handler, hence
the recursive mutex.
https://bugzilla.gnome.org/show_bug.cgi?id=650916
2011-07-28 14:50:59 +02:00
Olivier Crête
e26b5391c2
rtpssrcdemux: Use PADs lock
...
https://bugzilla.gnome.org/show_bug.cgi?id=650916
2011-07-28 14:50:57 +02:00
Olivier Crête
6095d2a3f0
rtpsession: Always send application requested feedback in immediate mode
...
Send as many application requested feedback messages in immediate mode, even if they
have already been sent.
https://bugzilla.gnome.org/show_bug.cgi?id=654583
2011-07-25 17:20:59 +02:00
Olivier Crête
354faabda0
rtpsession: Don't let the computed RTP bandwidth fall too low
...
If it falls too low, the computed RTCP bandwidth will be near zero and
the RTCP thread will be stopped.
https://bugzilla.gnome.org/show_bug.cgi?id=654583
2011-07-25 16:19:00 +02:00
Olivier Crête
4d48109f9d
rtpsession: Wait longer to timeout SSRC collision
...
Using the current RTCP interval to timeout SSRC collision can lead to
collisions being timed out immediately if a BYE packet is sent because
it is sent immediately, so the interval is 0. This is not what we
want. So just set a static 10 times the default RTCP interval, it
should be enough
https://bugzilla.gnome.org/show_bug.cgi?id=648642
2011-07-25 16:18:58 +02:00
Mark Nauwelaerts
ef02634dc6
rtpmanager: port to 0.11
...
* use G_DEFINE_TYPE
* adjust to new GstBuffer and corresponding rtp and rtcp buffer interfaces
* misc caps and segment handling changes
FIXME: also relies on being able to pass caps along with a buffer,
which has no evident equivalent yet, so that either needs one,
or still needs quite some code path modification to drag along caps.
2011-07-06 10:16:12 +02:00
Mark Nauwelaerts
d59a00aa1c
Merge branch 'master' into 0.11
...
Conflicts:
ext/pulse/pulsesink.c
2011-07-04 11:48:13 +02:00
Miguel Angel Cabrera Moya
977a5eee7a
rtpjitterbuffer: return correct type when assertion fails
2011-06-24 11:59:01 +02:00
Wim Taymans
cc65bff7c1
Merge branch 'master' into 0.11
...
Conflicts:
configure.ac
docs/plugins/inspect/plugin-esdsink.xml
docs/plugins/inspect/plugin-gconfelements.xml
2011-06-21 18:24:41 +02:00
Olivier Crête
581a30d892
rtpsession: The signal has 5 arguments, not 4
2011-06-20 16:47:36 -04:00
Wim Taymans
409f29700d
-good: port some more plugins
2011-06-13 17:51:40 +02:00
Wim Taymans
e15651816e
Merge branch 'master' into 0.11
2011-05-17 16:13:59 +02:00
Sebastian Dröge
b694bfeca3
ssrcdemux: Fix uninitialized variable compiler warning for (pre-) releases too
2011-05-17 10:47:32 +02:00
Sebastian Dröge
0f05d3e5a5
rtpssrcdemux: Fix uninitialized variable compiler warning
2011-05-17 09:24:08 +02:00
Olivier Crête
b6bfc512e8
ssrcdemux: Implement iterate internal links for sink pads
...
https://bugzilla.gnome.org/show_bug.cgi?id=649617
2011-05-17 09:22:29 +02:00
Olivier Crête
23b6c8febc
rtpssrcdemux: iterate pad function is only valid for src pads
...
The iterate function is only used for src pads, so mark it as such and remove
dead code.
https://bugzilla.gnome.org/show_bug.cgi?id=649617
2011-05-17 09:22:25 +02:00
Olivier Crête
1bf94a92b0
rtpssrcdemux: Release lock before emitting signal
...
If the lock is not released before emitting a signal, it may cause a deadlock
if any other function in the element is called.
Also removed an unused timestamp parameter
https://bugzilla.gnome.org/show_bug.cgi?id=649617
2011-05-17 09:22:20 +02:00
Wim Taymans
a1894ed363
Merge branch 'master' into 0.11
2011-04-25 11:38:28 +02:00
Olivier Crête
42531337f5
rtpsession: Remove incomplete support for RTCP FIR
...
Remove bits that were meant to suppport RTCP FIR
https://bugzilla.gnome.org/show_bug.cgi?id=648160
2011-04-20 07:50:43 +01:00
Wim Taymans
7555d0949f
Merge branch 'master' into 0.11
...
Conflicts:
android/apetag.mk
android/avi.mk
android/flv.mk
android/icydemux.mk
android/id3demux.mk
android/qtdemux.mk
android/rtp.mk
android/rtpmanager.mk
android/rtsp.mk
android/soup.mk
android/udp.mk
android/wavenc.mk
android/wavparse.mk
configure.ac
2011-04-18 10:23:45 +02:00
Robert Swain
5b18c652fb
rtp, rtpmanager: Address unused but set variables
...
GCC 4.6.x spits warnings about variables that are unused but set. Such
variables have been removed where trivial but with comments left behind
for informational purposes in some cases.
gst_rtp_session_chain_recv_rtcp () was changed in commit 490113d4
to always return GST_FLOW_OK instead of the return value of
rtp_session_process_rtcp (), so we'll keep it that way.
2011-04-16 12:49:16 +01:00
Olivier Crête
9d9257916b
rtpsession: Use existing functions to parse RTCP FB packets
...
Use existing functions to get the FCI from FB packets.
https://bugzilla.gnome.org/show_bug.cgi?id=622553
2011-04-15 12:48:04 +01:00
Olivier Crête
5ccd964d86
rtpsession: marshal GstBuffer as a MiniObject instead of a pointer
...
https://bugzilla.gnome.org/show_bug.cgi?id=622553
2011-04-15 12:47:40 +01:00
Pascal Buhler
0d2d52856f
rtpssrcdemux: Unknown SSRC is not fatal
...
https://bugzilla.gnome.org/show_bug.cgi?id=646966
2011-04-11 17:37:58 -04:00
Pascal Buhler
58ef84846e
rtpsession: Number of active sources should be updated whenever the status of the source changes to active
...
Forward-ported by Olivier Crête
https://bugzilla.gnome.org/show_bug.cgi?id=646965
2011-04-11 17:37:36 -04:00
Havard Graff
53c88ae33e
rtpmanager: ignore a BYE if it is sent with our internal SSRC
...
https://bugzilla.gnome.org/show_bug.cgi?id=646964
2011-04-11 17:34:12 -04:00
Thibault Saunier
b541208b77
android: Make it ready for androgenizer
...
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
2011-04-11 01:20:11 +02:00
Havard Graff
93f022d6ab
rtpsession: fix wrongly applied patch
...
Obviously recv_rtp_sink does not have much to do with send_rtcp_src...
See commit 046ff170.
https://bugzilla.gnome.org/show_bug.cgi?id=647263
2011-04-09 12:32:37 +01:00
Havard Graff
e71a908d96
jitterbuffer: Make src_query MT-safe
...
It is possible that the element might be going down while the event arrives
2011-04-08 15:23:05 +02:00
Sebastian Dröge
4c36ca30b2
jitterbuffer: Unref event if the parent element disappeared
2011-04-08 15:22:19 +02:00
Havard Graff
342686bb02
jitterbuffer: Make upstream events MT-safe
2011-04-08 15:21:46 +02:00
Sebastian Dröge
31af4fe33e
rtp: Unref events if the parent element disappeared
2011-04-08 15:20:51 +02:00
Ole André Vadla Ravnås
046f170d6a
rtpmanager: fix pad callbacks so they handle when parent goes away
...
1) We need to lock and get a strong ref to the parent, if still there.
2) If it has gone away, we need to handle that gracefully.
This is necessary in order to safely modify a running pipeline. Has been
observed when a streaming thread is doing a buffer_alloc() while an
application thread sends an event on a pad further downstream, and from
within a pad probe (holding STREAM_LOCK) carries out the pipeline plumbing
while the streaming thread has its buffer_alloc() in progress.
2011-04-08 15:16:56 +02:00
Havard Graff
f8370bb2a8
rtpsession: make iterate_internal_links MT-safe
2011-04-08 14:41:34 +02:00
Wim Taymans
c124ba1489
Merge branch 'master' into 0.11
...
Conflicts:
gst/rtsp/gstrtspsrc.c
2011-04-05 17:20:08 +02:00
Mark Nauwelaerts
e5bcaa45e6
Revert "jitterbuffer: reset element base_time upon flush"
...
This reverts commit f84b8a69cb
.
Fixes bug #646397 .
2011-04-04 11:49:00 +02:00
Wim Taymans
8f22a09dc4
Merge branch 'master' into 0.11-fdo
2011-03-28 20:50:59 +02:00
Mark Nauwelaerts
6bc1aa0e59
jitterbuffer: handle position query
2011-03-09 17:18:08 +01:00
Wim Taymans
a4fdb8ee44
Merge branch 'master' into 0.11
...
Conflicts:
tests/examples/cairo/Makefile.am
2011-03-08 10:14:20 +00:00
Mark Nauwelaerts
1f7f434df6
jitterbuffer: also estimate eos if very near eos
2011-03-07 16:56:43 +01:00
Mark Nauwelaerts
3c9a4239bf
jitterbuffer: avoid trying to buffer more than is available.
...
That is, in case of short (or near eos of) stream, deadlock (until timeout)
would occur trying to buffer more than is yet forthcoming.
2011-03-07 16:56:18 +01:00
Mark Nauwelaerts
f84b8a69cb
jitterbuffer: reset element base_time upon flush
...
... to arrange for properly scheduled timeout (following seek).
2011-03-07 11:07:12 +01:00
Wim Taymans
0a56b25882
rtpsession: use NetAddress metadata
2011-02-28 13:28:29 +01:00
Wim Taymans
d87c27fd2c
miniobject: use buffer private field for extra data
...
Use the owner private field to store extra buffer data instead of using
subclassing.
2011-02-28 11:58:48 +01:00
Blaise Gassend
0f88181f43
rtpbin: handle NULL demux elements
...
When using gstrtpbin with ignore-pt=true, the free_stream function tries to
call gst_element_set_locked_state and gst_element_set_state on a stream->demux
which is NULL.
fixes #642412
2011-02-22 13:31:35 +01:00
Wim Taymans
45ea930a99
rtpbin: fix setting the SDES property
...
Only the sdes veriable is protected with the object lock.
Use the right object when setting the sdes property.
2011-02-21 17:19:05 +01:00
Wim Taymans
61382aad28
source: fix type of ntpnstime
2011-02-02 18:30:47 +01:00
Wim Taymans
8598aaf81b
rtpbin: Get and use the NTP time when receiving RTCP
...
When we receive an RTCP packet, get the current NTP time in nanseconds so that
we can correctly calculate the round-trip time.
2011-02-02 18:30:46 +01:00
Olivier Crête
cd923223dd
rtpsession: Add action signal to request early RTCP
2011-02-01 18:28:51 +01:00
Olivier Crête
c0996e6b90
rtpsession: Add callback to get the current time
2011-02-01 18:28:51 +01:00
Olivier Crête
a630c68fc3
rtpsession: Don't relay more than one PLI request per RTT
...
Drop PLI requests if one was relay in the last RTT, the other side may
just not have received the keyframe yet.
2011-02-01 18:28:51 +01:00
Olivier Crête
a61bb9e94b
rtpsession: Send GstForceKeyUnit event in response to received RTCP PLI
2011-02-01 18:28:51 +01:00
Sjoerd Simons
7350d2adfa
gstrtpsession: Fallback for FIR to PLI if PLI isn't available
2011-02-01 18:28:51 +01:00
Olivier Crête
52f95fa7ee
rtpsession: Implement sending PLI packets in response to GstForceKeyUnit
2011-02-01 18:28:51 +01:00
Olivier Crête
db5150a23a
rtpsource: Retain RTCP Feedback packets for a specified amount of time
2011-02-01 18:28:51 +01:00
Olivier Crête
90354ecb49
rtpsession: Make rtcp buffer metadata writable after processing it
...
Functions that process the rtcp buffer could decide to keep a ref
on the buffer for further processing. So make the metadata writable
only after they are done.
2011-02-01 18:28:50 +01:00
Olivier Crête
1643f427db
rtpsession: Emit signal on incoming RTCP FB packet
2011-02-01 18:28:50 +01:00
Wim Taymans
f399b6a641
rtpsession: fix compilation
2011-02-01 18:28:50 +01:00
Olivier Crête
1bde427250
rtpsession: Add method to request early RTCP packet
...
Implement the early mode defined in RFC 4585. In this mode, RTCP feedback
packets are sent early to notifier.
2011-02-01 17:03:39 +01:00
Olivier Crête
975e1fecb3
rtpsession: Add property for minimum interval between Regular RTCP messages
...
This can be changed according to RFC 4585
2011-02-01 16:56:15 +01:00
Olivier Crête
cdb5465741
rtpsession: Emit signal when sending a compound RTCP packet
...
This allows users to add extra RTCP packets to the compound
RTCP packet.
2011-02-01 16:50:58 +01:00
Olivier Crête
589b254ce5
rtpptdemux: Tag upstream custom events with payload type
2011-02-01 16:50:25 +01:00
Olivier Crete
c7b1ce7310
rtpssrcdemux: Tag upstream custom events with SSRC
2011-02-01 16:49:10 +01:00
Olivier Crête
9f073459e0
rtpsession: Emit "on-ssrc-validated" when validating by RTCP
...
Emit "on-ssrc-validated" if the SSRC is validated by receiving
a RTCP SDES packet.
2011-02-01 16:45:58 +01:00
Stefan Kost
9f34b89245
rtpjitterbuffer: don't divide by 0
2011-01-25 21:57:57 +02:00
Wim Taymans
b5647685c4
rtpsource: use the right variable
...
Use the right variable for specifying that we sent a receiver report.
2010-12-27 13:13:46 +01:00
Wim Taymans
7caad21a57
rtpsource: include last send RB block
...
Only report RB values for non-internal sources.
Report not only the RB blocks we last received from but also the last RB
block we sent to a source.
2010-12-23 13:58:30 +01:00
Wim Taymans
8fa5ddab9a
rtpsession: remember last sent RB values.
2010-12-23 13:58:30 +01:00
Wim Taymans
6035ee08c0
rtpsource: include all stats and document
...
Include all possible stats of a source in the stats structure because we might
be interested in what happened in the past.
Document the stats property and the fields.
2010-12-23 13:58:30 +01:00
Wim Taymans
10a5a795ea
rtpsession: also emit RTCP activity on SR
...
Also emit RTCP activity signals when we receive an SR packet without RB blocks,
such as from a sender that is not receiving anything.
2010-12-23 13:58:30 +01:00
Wim Taymans
1230258e6f
docs: add some more gstrtpbin docs
2010-12-23 13:58:29 +01:00
Wim Taymans
2b53cbe923
rtpsession: unlock before emitting signals
2010-12-22 11:46:21 +01:00
Wim Taymans
eb6d552353
jitterbuffer: get better buffering level
...
When the jitterbuffer contains -1 timestamps, make sure we still calculate the
buffer fill level by skipping the -1 buffers.
Try to be more resilient to weird input timestamps.
2010-12-20 15:56:50 +01:00
Wim Taymans
6cb0efede4
jitterbuffer: provide a clock.
...
since we are using the clock for sync, we need to also provide a clock for good
measure. The reason is that even if downstream elements provide a clock, we
don't want to have that clock selected because it might not be running yet.
2010-12-20 11:13:09 +01:00
Wim Taymans
210f1c44c7
rtpbin: copy buffering stats
...
when we create an aggregate buffering message, copy the buffering stats form the
last message. At least we get correct buffering mode then.
2010-12-20 11:13:09 +01:00
Wim Taymans
0c3333da04
session: fix average RTCP packet size some more.
...
Fix stupid error in averaging macro.
Include udp headers in packet length estimation.
2010-12-14 18:12:43 +01:00
Wim Taymans
7ebd374766
rtpbin: correctly calculate RTCP packet size
2010-12-14 17:15:23 +01:00
Wim Taymans
ffc7cd9803
jitterbuffer: avoid leaking sink events
...
Avoid leaking the newsegment event when it has the wrong format.
2010-12-13 12:57:58 +01:00
Mark Nauwelaerts
46c91476eb
rtpssrcdemux: do not hold custom PAD_LOCK when pushing downstream
2010-12-03 15:50:21 +01:00
Olivier Crête
077a61932a
rtpbin: Use the right constant to define the "use-pipeline-clock" property
...
The wrong #define was being used, now use the correct one.
2010-10-14 17:41:30 -04:00
Stefan Kost
d8167e3071
various (gst): add a missing G_PARAM_STATIC_STRINGS flags
2010-10-13 18:00:28 +03:00
Tim-Philipp Müller
d65eb2b91a
ext, gst: canonicalise property names where this wasn't the case
...
ie. "foo_bar" -> "foo-bar"
2010-10-12 16:04:21 +01:00
Vladimir Eremeev
8bf7381385
rtpjitterbuffer: improve article reference in comment block
...
https://bugzilla.gnome.org/show_bug.cgi?id=631082
2010-10-01 18:07:03 +01:00
Thijs Vermeir
2c2c90a723
rtpjitterbuffer: update link to documentation
2010-09-30 12:08:49 +02:00
Pascal Buhler
7a8c2a4b8a
rtpmanager: packet lost should not be a warning. It happens all the time...
2010-09-24 16:00:03 +02:00
Pascal Buhler
ca6a512b5e
rtpbin: Make cleaning up sources in rtp_session_on_timeout MT safe
...
Using _foreach_remove on the hashtable, while releasing the lock protecting
that table inside the callback is not a good idea. The hashtable might
then change (a source removed or added) while signals like on_timeout
are being sent.
This solution makes a copy of the table, performs the _foreach without
actually removing any sources, but marks them for removal on a second
iteration with the real list, but this time not letting go of the lock.
Fixes #630452
2010-09-24 15:38:00 +02:00
Pascal Buhler
bd8d80a8e4
rtpbin: Handle rysnc of iterator when looking for free pad name
...
If a new pad was added while iterating then a pad could be
returned that was already in use.
Fixes #630451
2010-09-24 14:10:26 +02:00
Wim Taymans
8337c89c74
rtpsession: fix compilation
2010-09-24 14:10:26 +02:00
Trond Andersen
800b4bdb26
rtpbin: Unlock before adding pad in new_payload_found
...
Holding internal locks while potentially calling out is a source
of deadlocks, and in this case the application might subscribe to the
pad-added signal.
Fixes #630449
2010-09-24 14:00:11 +02:00
Havard Graff
062568a9f5
rtpsession: relax third-party collision detection
...
If the source has been inactive for some time, we assume that it has
simply changed its transport source address. Hence, there is no true
third-party collision - only a simulated one.
Fixes #630447
2010-09-24 13:56:56 +02:00
Wim Taymans
ce007b244e
rtpsource: whitespace fixes
2010-09-24 13:50:02 +02:00
Wim Taymans
c5203a479b
rtpsource: simplify the rate estimation some more
2010-09-24 13:48:50 +02:00
Havard Graff
0fa589a3dd
rtpmanager: provide additional statistics
2010-09-24 13:26:10 +02:00
Wim Taymans
2c8b725591
rtpstats: printf format fixes
2010-09-17 11:07:52 +02:00
Olivier Crête
8e73da10b3
gstrtpsession: Split getting the caps into its own function
2010-09-13 16:25:42 +02:00
Wim Taymans
8e1c9b5b33
rtpbin: small cleanup.
2010-09-13 16:25:42 +02:00
Wim Taymans
d541f5e24d
rtpsession: Small cleanups
...
Make the property description prettier.
Actually multiple the bandwidth with the fraction.
2010-09-13 15:51:20 +02:00
Olivier Crête
1f17b334ff
rtpsession: Calculate RTCP bandwidth as a fraction of the RTP bandwidth
...
Calculate the RTCP bandwidth to be a fraction of the RTP bandwidth if it is
specified as a value between 0 and 1.
2010-09-13 15:51:20 +02:00
Wim Taymans
8381d9788d
session: improve bandwidth recalculation
...
Also recalculate bandwidth when one of the source bandwidths changed.
Use the newly calculated bandwidth.
2010-09-13 15:51:20 +02:00
Olivier Crête
6f53a2b240
rtpsession: Add the option to auto-discover the RTP bandwidth
2010-09-13 15:51:19 +02:00
Thijs Vermeir
f38e37470a
rtpbin: set use-pipeline-clock on correct GObject
2010-09-13 14:39:51 +02:00
Olivier Crête
94e87ef8ee
rtpsession: Initialise the average scaled by 16
2010-09-13 13:10:19 +02:00
Wim Taymans
e6db74764b
rtpsession: add running_time argument docs
2010-09-13 12:41:56 +02:00
Olivier Crête
00fd89c074
rtpstats: Rectify description of current_time in RTPArrivalStats
...
It is the current time, it is unrelated to when the packet was actually received.
2010-09-13 12:37:01 +02:00
Wim Taymans
cb6de429a0
rtpsession: compute the average correctly scaled
2010-09-13 12:31:40 +02:00
Olivier Crête
64e4ffa25b
rtpsession: Count sent RTCP packets after they have been finished
...
If they are counted before calling gst_rtcp_buffer_end(), then the
size is way too big.
2010-09-13 12:13:23 +02:00
Olivier Crête
306ee454c6
gstrtpsession: Don't unref pads in finalize
...
The gstrtpsession object is not holding any reference to them directly
2010-09-13 12:10:11 +02:00
Wim Taymans
93228ccd52
rtpbin: add ntp-sync property
...
Add an ntp-sync property that will sync the received streams to the server
NTP time. This requires synchronized NTP times between the sender and receivers,
like with ntpd.
Based on patch from Thijs Vermeir.
Fixes #627796
2010-09-06 11:01:57 +02:00
Wim Taymans
f03fd91400
jitterbuffer: rename a variable to avoid confusion
2010-09-06 11:01:57 +02:00
Wim Taymans
e3479630ae
rtpbin: rename some variables for less confusion
2010-09-06 11:01:57 +02:00
Wim Taymans
0f59664c6a
rtpjitterbuffer: move comment where it belongs
2010-09-06 11:01:57 +02:00
Wim Taymans
4fd81747f3
session: minor cleanups
...
Make clock snapshots more accurate by only sampling the same clock once.
2010-09-06 11:01:57 +02:00
Thijs Vermeir
51020549f0
rtpbin: add use-pipeline-clock property
...
With this property RTCP SR NTP times can be based
on the system clock (maybe synced with ntpd) or the
current pipeline clock.
https://bugzilla.gnome.org/show_bug.cgi?id=627796
2010-09-06 11:01:57 +02:00
Thijs Vermeir
244a35a226
rtpptdemux: fix memleak on custom downstream events
...
by not sending custom downstream event twice and fix memleak when
not handling the event
https://bugzilla.gnome.org/show_bug.cgi?id=623196
2010-06-30 12:39:09 +02:00
Sebastian Dröge
f16ed4a91c
gst: Don't use GST_DEBUG_FUNCPTR for GObject vfuncs
2010-06-06 17:52:40 +02:00
Thijs Vermeir
0bb2be3a7e
rtpjitterbuffer: fix compiler warning
...
unused variable ‘estimated’
2010-06-02 15:32:36 +02:00
Alessandro Decina
4b6cb93025
rtpjitterbuffer: stop buffering and emit EOS at the end of a stream
...
When using RTP_JITTER_BUFFER_MODE_BUFFER, make sure that the ringbuffer doesn't
get stuck buffering forever when there isn't enough data left to fill the
buffer.
2010-06-02 14:21:16 +02:00
Wim Taymans
dc2662e22b
rtpbin: fix docs
...
Documentation error spotted by tony <caicai0119 at gmail.com>
Fixes #618419
2010-05-13 13:01:26 +02:00
Wim Taymans
50f26c671b
rtpsession: fix return value
2010-05-07 19:06:35 +02:00
Wim Taymans
aadf4ddf7e
rtpsession: add properties to configure the bandwidth
...
Add properties to proxy the bandwidth configuration to the session object.
2010-05-07 18:58:58 +02:00
Wim Taymans
69cde0e874
rtpsession: add properties to configure bandwidths
...
Add properties to configure the sender and receiver bandwidths.
Configure the bandwidths before calculating the RTCP timeout when we need to.
2010-05-07 18:57:13 +02:00
Wim Taymans
d84dc1112d
rtpstats: add some debug info
2010-05-07 18:56:30 +02:00
Wim Taymans
5690331c9e
rtpsession: small cleanups
2010-05-07 18:55:34 +02:00
Wim Taymans
0da5cf2e21
rtpstats: make bandwidths more configurable
...
Add a method to configure the various bandwidths in the session.
2010-05-07 16:55:13 +02:00
Wim Taymans
6eee730c4a
rtpsession: handle NONE RTCP intervals
...
Prepare for handling RTCP reporting intervals of GST_CLOCK_TIME_NONE, which
means don't send RTCP at all.
2010-05-07 13:32:30 +02:00
Alessandro Decina
40899379c0
rtpjitterbuffer: move some initialization code from change_state to _init.
...
Set ->active to TRUE in _init so it can be set to FALSE after creating the
jitterbuffer and it won't be mistakenly reset to TRUE in the change_state
function.
This is needed to start the jitterbuffer as inactive when rtpbin is buffering.
2010-05-03 13:34:59 +02:00
Alessandro Decina
ffc2da30fc
rtpbin: fix a bug handling BUFFERING messages.
...
If a session exists but has no streams, set the min buffering percent to 0
since it means that we haven't received anything for that session yet.
2010-05-03 11:56:58 +02:00
Alessandro Decina
f6e9f359b9
rtpbin: when a stream is created, pause the jitterbuffer if rtpbin is buffering.
2010-05-03 11:51:37 +02:00
Alessandro Decina
38a5b08ef2
rtpbin: fix a bug calculating stream offsets.
2010-05-03 11:23:59 +02:00
Stefan Kost
d6e9af2a11
docs: do proper escaping for "%"
2010-04-08 18:05:46 +03:00
Stefan Kost
9967a4112b
rtpsession: remove prototype for non existing function
...
There is no function by that name anywhere.
2010-04-08 14:02:50 +03:00
Benjamin Otte
cccfeaa59c
gst_element_class_set_details => gst_element_class_set_details_simple
2010-03-18 14:32:00 +01:00
Benjamin Otte
1055aaa9cb
Add -Wredundant-decls warning flag
...
Also fix compile issues
2010-03-17 19:35:10 +01:00
Benjamin Otte
21f66635e8
Update for recent changes to common submodule
...
This just replaces every "$ERROR_CFLAGS" usage with a usage of
"$WARNING_CFLAGS $ERROR_CFLAGS" to get the same functionality as
previously.
Actually using that separation will happen later.
2010-03-10 21:53:51 +01:00
Olivier Crête
a6dfe96169
rtpsession: Make it possible to favor new sources in case of SSRC conflict
...
Add a "favor-new" property that tells the session to favor new sources when
there is a SSRC conflict. This is useful for SIP calls and other such cases
where a remote loop is extremely unlikely.
Fixes #607615
2010-03-10 11:21:19 +01:00
Olivier Crête
f336ea283f
rtpsession: Move SSRC conflicts lists into RTPSource
...
We will also need to track SSRC conflicts in remote sources.
See #607615
2010-03-10 11:21:18 +01:00
Wim Taymans
529f443a61
rtpsource: use payload size to estimate bitrate
...
Use the length of the payload for estimating the receiver bitrate so that it
matches the calculations done on the sender side. Together with the number of
packets one can scale the bitrate with the header overhead of the lower
transport.
2010-03-08 17:48:04 +01:00
Wim Taymans
c971d1a9ab
rtpsource: refactor bitrate estimation
...
Don't reuse the same variable we need for stats for the bitrate estimation
because we're updating it.
Refactor the bitrate estimation code so that both sender and receivers use the
same code path.
2010-03-08 17:48:00 +01:00
Tristan Matthews
a0a6d4ff3b
added bitrate estimation to receiver-side stats, fixes #611213
2010-03-08 17:47:55 +01:00
Sebastian Dröge
bcd06ea527
rtpjitterbuffer: Reset skew detection after instantiating the jitterbuffer
...
...not only when going to READY. This sets high_level and friends to
a more useful value.
2010-02-23 17:24:03 +01:00
Sebastian Dröge
0a12e69024
rtpjitterbuffer: Return 100 if high-level is 0 instead of dividing by zero
2010-02-23 17:20:02 +01:00
Tim-Philipp Müller
07fa73f199
docs: add Since: markers for new jitterbuffer properties
2010-02-19 12:13:07 +00:00
Wim Taymans
9d40d60960
rtpbin: remove use of ntp_ns_base
2010-02-15 21:36:29 +01:00
Wim Taymans
5a4ecc9da1
rtpbin: remove more ntpnstime and cleanups
...
Remove some code where we pass ntpnstime around, we can do most things with the
running_time just fine.
Rename a variable in the ArrivalStats struct so that it's clear that this is the
current system time.
2010-02-15 21:36:29 +01:00
Wim Taymans
74241e549f
rtpsource: use running_time for jitter
...
Use the running_time to calculate the jitter instead of the ntp time. Part of
the plan to get rid of ntpnsbase.
2010-02-15 21:36:29 +01:00
Wim Taymans
83cb1aecc8
rtpbin: change how NTP time is calculated in RTCP
...
Don't calculate the NTP time based on the running_time of the pipeline but from
the systemclock. This allows us to generate more accurate NTP timestamps in case
the systemclock is synchronized with NTP or similar.
2010-02-15 21:36:29 +01:00
Tim-Philipp Müller
63c86ac3d8
raw1394, matroska, rtpmanager: remove padding from structures
...
None of these element and class structures are in public headers,
so don't need padding.
2010-02-15 00:50:10 +00:00
Wim Taymans
7f08081016
jitterbuffer: don't resync to invalid timestamps
...
If we detect backward timestamps on the server, don't try to resync when we
don't have an input timestamp (such as when using RTSP over TCP) instead, do
nothing but assume the timestamp was ok, it will correct itself when time goes
forwards.
2010-02-12 19:32:27 +01:00
Wim Taymans
d344754f03
rtpbin: fix typo
2010-02-12 17:22:56 +01:00
Wim Taymans
772eca5aff
jitterbuffer: start out active and not buffering
...
There is no need to set the latency in the jittebuffer in _init, we will set
that later when going to PAUSED.
Set the jitterbuffer active and not buffering when starting.
2010-02-12 17:22:56 +01:00
Wim Taymans
8bbfd94c25
rtpbin: more buffering work
...
When deactivating jitterbuffers when the buffering starts, keep the current
percent of the jitterbuffer and also set the jitterbuffer in the buffering state
so that we know when it's filled again.
Add property to get the buffering percentage of the jitterbuffer.
2010-02-12 17:22:56 +01:00
Wim Taymans
e6e287cdcc
rtpjitterbuffer: adjust latency in buffer mode
...
When we are in buffer mode, adjust the buffering low/high thresholds based on
the total configured latency. If we don't and there is a huge queue or element
with a big latency downstream we might drain the complete queue immediately and
start buffering again.
2010-02-12 17:22:55 +01:00
Wim Taymans
ab73603031
jitterbuffer: add ts-offset to timestamp
...
Add the ts-offset to the buffer timestamp to get the final output timestamp of
the buffer.
2010-02-12 17:22:55 +01:00
Wim Taymans
74a3be350d
rtpbin: do more accurate buffer offsets
...
Return the next timestamp in the jitterbuffer.
Use the min-timestamp of the jitterbuffers to calculate an offset so that the
next timestamp is pushed with a timestamp equal to running_time.
Start producing timestamps from 0 in the buffering case too.
2010-02-12 17:22:55 +01:00
Wim Taymans
3efcc0fbc1
rtpbin: only start buffering when < 100%
...
Only start buffering when the percentage message is < 100 %.
2010-02-12 17:22:55 +01:00
Wim Taymans
0348ebe651
rtpbin: keep track of elapsed pause time
...
Keep track of the time we spend pausing the jitterbuffers when they were
buffering and distribute this elapsed time to the jitterbuffers.
Also keep the latency in nanosecond precision.
2010-02-12 17:22:54 +01:00
Wim Taymans
ecf6ed8fc1
jitterbuffer: keep track of offset
...
Keep track of an outgoing offset that we add to each outgoing buffer to
compensate for PAUSE when buffering.
Adjust the offset when activating.
2010-02-12 17:22:54 +01:00
Wim Taymans
048e5b6fbe
jitterbuffer: report level using high watermark
2010-02-12 17:22:54 +01:00
Wim Taymans
8d814f3782
rtpbin: pass running_time to jitterbuffer pause
...
Pass the current running time to the jitterbuffer when pausing or resuming so
that it calculate the right offsets.
Small cleanups and comments.
Set the default rtspsrc latency to 2 seconds.
2010-02-12 17:22:54 +01:00
Wim Taymans
bf697b12e3
rtpbin: add some comments
2010-02-12 17:22:53 +01:00
Wim Taymans
20a27a545a
rtpbin: more buffering updates
...
Add signal to pause the jitterbuffer. This will be emitted from gstrtpbin when
one of the jitterbuffers is buffering.
Make rtpbin collect the buffering messages and post a new buffering message with
the min value.
Remove the stats callback from jitterbuffer but pass a percent integer to
functions that affect the buffering state of the jitterbuffer. This allows us
then to post buffering messages from outside of the jitterbuffer lock.
2010-02-12 17:22:53 +01:00
Wim Taymans
a5b9d3f917
rtpbin: propagate buffer-mode property
...
Propagate buffer-mode property to the jitterbuffers.
Intercept BUFFERING messages in rtpbin
2010-02-12 17:22:53 +01:00
Wim Taymans
d3db9574a9
jitterbuffer: do more buffering implementation
...
Add callback for buffering stats.
Configure the latency in the jitterbuffer instead of passing it with _insert.
Calculate buffering levels when pushing and popping
Post buffering messages.
2010-02-12 17:22:52 +01:00
Wim Taymans
aeacbfed3e
jitterbuffer: flesh out buffering mode some more
...
Add a buffering state to the jitterbuffer and wait until buffering ends before
pushing out packets.
2010-02-12 17:22:52 +01:00
Wim Taymans
56b29c9a6b
jitterbuffer: hook up the mode property
...
Expose a mode property on the jitterbuffer.
Fix the case where timestamps are -1 in the check for outgoing timestamps.
2010-02-12 17:22:52 +01:00
Wim Taymans
be4517a6b8
jitterbuffer: add buffering mode options
...
Add getters and setters for different buffering modes that the jitterbuffer will
support. Default to the current slave mode.
2010-02-12 17:22:52 +01:00
Wim Taymans
99a581215f
jitterbuffer: add some more debug info
2010-02-12 13:53:57 +01:00
Wim Taymans
05418f1687
rtpbin: avoid some structure copies
...
Don't make copied in the getter and setter for SDES in the RTPSource. This
avoids a couple of copies of the SDES structure when generating RTCP
packets.
2009-12-22 22:27:21 +01:00
Pascal Buhler
c3448f978e
rtpmanager: improve SDES handling
...
Store SDES internally as a struct to support multiple PRIV values.
Include all values set in SDES struct when sending RTCP SDES.
2009-12-22 21:43:25 +01:00
Wim Taymans
9734699788
rtpbin: add property to remove pads automatically
...
Add a property called autoremove to automatically remove the pads of sources
that timed out.
Fixes #554839
2009-12-21 15:07:44 +01:00
Wim Taymans
c611bbaa8e
ssrcdemux: fix comparison
...
A NULL means no pad was found.
2009-12-21 15:07:34 +01:00
Aurelien Grimaud
07f27f0efd
rtpsession: avoid buffer ref/unref pairs for CSRCs
...
We ref the buffer before pushing it downstream in order to get the CSRCs of it
after pushing. This causes performance problems when downstream elements want to
change the metadata because the buffer needs to be subbuffered.
Instead, read and store the CSRCs of the buffer in an array before pushing it
and process the array after pushing the buffer. This allows us to remove the
ref/unref pair.
Fixes #603376
2009-11-30 15:59:50 +01:00
Wim Taymans
8070ae967b
jitterbuffer: avoid using wrong clock-rate
...
Check for a valid clock-rate before attempting to estimate the npt
stop time.
2009-11-25 10:38:23 -06:00
Wim Taymans
5682e2bf01
rtpbin: fix typo in comments
2009-11-25 10:37:30 -06:00
Stefan Kost
9ee0815e85
docs: more links and better short description
...
Fix spelling of GstRtpSsrcDemux to get it linked. Add more links. Change
the short description to be more meaningful.
2009-11-20 11:25:49 +02:00
Wim Taymans
f52859432f
jitterbuffer: release lock before emiting signals
...
Release the jbuf lock before emiting the request-pt-map signal to avoid
deadlocks. We also need to catch the shutdown case when locking again.
Fixes #593354
2009-11-18 10:50:44 +01:00
Stefan Kost
e43eb89449
tests: add a jitterbuffer test
...
Tests pushing a few buffers in various order and asserting the order sent by the
jitterbuffer. Contains two disabled tests that need more work.
2009-10-22 13:35:57 +03:00
Stefan Kost
6904e46ef2
build: use gst-glib-gen.mak to fix the glib build rules.
...
The build rules in glib-gen.mak were using pattern rules in a non save way.
2009-10-16 11:53:38 +03:00
Håvard Graff
58b9de4cca
rtpptdemux: only forward the lost-event to the last seen pt-number
...
forward all events on all pads except for the PacketLost event, which we want to
forward to the last seen pt pad.
Fixes #598377
2009-10-14 12:28:55 +02:00
Stefan Kost
e0cdd879b4
build: fprintf, sprintf, sscanf need stdio.h
2009-10-07 14:03:20 +03:00
Wim Taymans
0040d01265
rtpbin: use locking around the sessions
2009-10-05 16:07:24 +02:00
Wim Taymans
8fb77403c5
jitterbuffer: cache latency in nanoseconds
...
Cache the latency in nanoseconds units to avoid having to convert the
milliseconds value to nanoseconds all the time.
2009-10-01 12:52:40 +02:00
Wim Taymans
c262735164
jitterbuffer: handle -1 input timestamps
...
Don't try to check a -1 timestamp against the max delay.
2009-10-01 12:12:09 +02:00
Stefan Kost
0a7ef67ad0
docs: fix gtk-doc warnings
2009-09-10 10:28:48 +03:00
Marc Leeman
6b46aeb6a3
rtpbin: add ignore-pt parameter
...
Add a parameter 'ignore-pt' that disables creating a gstrtpptdemux module and
ghosts the pads of gstrtpjitterbuffer instead of the ones of gstrtpptdemux.
Fixes #594490
2009-09-08 17:38:32 +02:00
Håvard Graff
2912b21d14
rtpbin: propagate payload-type-change signal from demuxer
...
fixes #594254
2009-09-08 13:59:56 +02:00
Havard Graff
a52309eff7
jitterbuffer: change severity of clock-rate change debug
...
Make log GST_DEBUG under normal circumstances, GST_WARNING otherwise.
Fixes #594253
2009-09-08 13:44:49 +02:00
Håvard Graff
40549278c3
jitterbuffer: avoid throwing reordered buffers with same timestamps
...
When we receive a reordered packet with the same timestamp as the previous one
(which can happen for fragmented packets) don't consider the packet as lost but
instead wait for the reordered packet to arrive.
Switch the warning-level, so that a reordering does not get a warning, only
an actual produced lost-packet.
Fixes #594251
2009-09-08 13:39:31 +02:00
Stig Sandnes
8f3299c547
rtpbin: make free_session() remove stream references
...
When receiving a sync-packet, all sessions with the same cname will be compared
and synced together. In this process, there could still be references to a
session that has been shut down in the meanwhile.
This patch makes sure that these references are removed when shutting down a
session, so that the syncing can be done safely.
Fixes #594283
2009-09-08 13:18:29 +02:00
Havard Graff
e08e610db0
rtpbin: use locked state on internal bins
...
Set the locked state on internal elements to make sure that they don't change
back to another state when shutting down.
Fixes #594248
2009-09-08 12:41:52 +02:00
Laurent Glayal
371875c57a
rtpsource: fix memleak
...
Don't leak the input buffer when the received and expected seqnum are different when
in probation.
fixes #594039
2009-09-03 19:37:10 +02:00
Olivier Crête
f542f710cf
rtpjitterbuffer: Lock clock_rate variable
...
The priv->clock_rate variable could become -1 between when its checked to not
be -1 and when its used, causing an assertion. Fixed by taking the mutex
earlier in the chain() function.
Fixes #593955
2009-09-03 19:17:00 +02:00
Wim Taymans
3fcde4486d
rtpsource: whitespace fixes
2009-09-03 19:17:00 +02:00
Wim Taymans
3f629f6001
rtpsession: whitespace fixes
2009-09-03 19:16:59 +02:00
Peter Kjellerstedt
fdf18653b7
rtpmanager: Fixed a copy & paste error
2009-09-01 15:06:46 +02:00
Peter Kjellerstedt
dc4f9575be
rtpmanager: Removed unused variable priv
...
The variable priv was initialized in a lot of functions but then never
used for anything.
2009-09-01 13:21:23 +02:00
Peter Kjellerstedt
57adc2a803
rtpmanager: A little clean up
...
Make the code flow of gst_rtp_session_send_rtcp() and
gst_rtp_session_sync_rtcp() identical.
2009-09-01 13:04:14 +02:00
Peter Kjellerstedt
923b5b495a
rtpmanager: Make sure that used caps are not freed already (take 2)
...
This reintroduces the fix for bug #593391 . It also applies it in
gst_rtp_session_sync_rtcp() which has very similar code to
gst_rtp_session_send_rtcp().
2009-09-01 13:04:14 +02:00
Wim Taymans
8d924611e7
jitterbuffer: make sure time does not go backwards
...
When we construct a timestamp that would result in a timestamp that is earlier
than when the packet was received, reset the skew calculation as this is
probably a sign that the sender restarted or paused.
Fixes #593354
2009-09-01 12:48:28 +02:00
Peter Kjellerstedt
bfb1260af4
rtpmanager: Set caps in gst_rtp_session_send_rtcp() correctly again
...
The test for when to set an RTCP caps on the output pad in
gst_rtp_session_send_rtcp() accidentally got inverted in the last commit.
2009-09-01 11:32:41 +02:00
Wim Taymans
a74c385b7b
rtpsession: use proper locking for pads and caps
...
Use the sesion lock and shotdown variable to protect and ref the pads we are
going to push on.
fixes #561825
2009-08-31 16:38:27 +02:00
Wim Taymans
a522a2d4d2
rtpbin: whitespace fixes
2009-08-31 16:33:26 +02:00
Wim Taymans
a26a2a9ff5
jitterbuffer: add slope estimation code and debug
...
Add some code to measure the sender speed vs the receiver speed. This can be
used to detect bursts.
2009-08-31 13:02:16 +02:00
Wim Taymans
4814d899c2
jitterbuffer: reset skew when timestamps change
...
Refactor the jitterbuffer resync code.
Reset the skew correction when we detect a big timestamp discont.
See #593354
2009-08-31 12:57:32 +02:00
Wim Taymans
e254936e34
jitterbuffer: make sure time never goes invalid
...
Since the skew can be negative, we might end up with invalid timestamps. Check
for negative results and clamp to 0.
See #593354
2009-08-31 12:47:15 +02:00
Sebastian Dröge
041fa82179
rtpsession: Make sure that used caps are not freed already
...
Fixes bug #593391 .
2009-08-31 08:09:09 +02:00
Sebastian Dröge
000a483d31
rtp: Use new gst_iterator_new_single() for the internal linked pads iteration
2009-08-31 08:09:09 +02:00
Sebastian Dröge
a1cddb3fd6
rtpsession: Use iterate internal links instead of deprecated get internal links
2009-08-31 08:09:09 +02:00
Sebastian Dröge
c8c02d2c7a
jitterbuffer: Use iterate internal links instead of deprecated get internal links
2009-08-31 08:09:08 +02:00
Sebastian Dröge
97cb7bdb6c
rtpssrcdemux: Use iterate internal links instead of deprecated get internal links
2009-08-31 08:09:08 +02:00
Olivier Crête
7f569ca9c8
rtpbin: Fix reference leak
...
Fixes #591476 .
2009-08-14 13:47:18 +01:00
ric
92abe07e80
rtpsource: avoid buffer leak on bad seqnum
...
Fixes #590797
2009-08-11 02:30:47 +01:00
Wim Taymans
9f68303a2e
rtpsource: allow for NULL caps on buffers
...
Add the NULL caps check where it matters and also cover another case of
potential NULL caps.
Fixes #590030
2009-08-11 02:30:47 +01:00
Olivier Crête
e37844fdc7
rtpsource: Incoming buffers do not always have caps
2009-08-11 02:30:47 +01:00
Wim Taymans
3091137217
rtpsession: avoid doing lip-sync in BYE
...
When we get a BYE packet, don't do lip-sync with the SR inside because some
senders have trouble constructing valid SR packets after BYE.
2009-08-11 02:30:47 +01:00
Wim Taymans
3747ede14a
rtpbin: don't do lip-sync after a BYE
...
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
2009-08-11 02:30:47 +01:00
Wim Taymans
d2ef095b80
rtpbin: only reconsider once for BYE
...
When iterating the sources of a BYE packet, don't signal a reconsideration for
each of them but signal after we handled all sources.
2009-08-11 02:30:47 +01:00
Olivier Crête
e8c6bcdf8d
rtpsession: Free conflicting addresses on finalize
2009-08-11 02:30:46 +01:00
Wim Taymans
428368b44a
rtpbin: use new method for netaddress to string
2009-08-11 02:30:46 +01:00
Wim Taymans
512ba93159
rtpbin: do better cleanup of the src ghostpads
...
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.
Fixes #561752
2009-08-11 02:30:46 +01:00
Wim Taymans
d7a8663e05
rtpsession: add a comment
2009-08-11 02:30:46 +01:00
Wim Taymans
c53e595d23
rtpbin: add SDES property
...
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
2009-08-11 02:30:46 +01:00
Wim Taymans
9f330992f5
rtpbin: add SDES property that takes GstStructure
...
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
2009-08-11 02:30:46 +01:00
Wim Taymans
d8496fb105
rtpbin: removed old gstrtpclient
2009-08-11 02:30:45 +01:00
Branko Subasic
779f67adc4
rtpbin: add support for buffer-list
...
Add support for sending buffer-lists.
Add unit test for testing that the buffer-list passed through rtpbin.
fixes #585839
2009-08-11 02:30:45 +01:00
Tim-Philipp Müller
c5793a6a45
Make build without warnings with debugging disabled
2009-08-11 02:30:45 +01:00
Olivier Crête
cf873498d2
rtpbin: Transform the right session sdes message
...
Fixes #584165
2009-08-11 02:30:45 +01:00
Olivier Crête
dee142a945
Add ssrc to application/x-rtp-source-sdes structure
2009-08-11 02:30:45 +01:00
Wim Taymans
bf15048f42
rtpsouce: the network address is in network order
...
Bring the network address in netowkr byte order to the host order.
2009-08-11 02:30:45 +01:00
Wim Taymans
91eef69131
rtpsource: byteswap the port from GstNetAddress
...
Since the port in GstNetAddress is in network order we might need to byteswap it
before adding it to the source statistics.
2009-08-11 02:30:45 +01:00
Wim Taymans
51251d0fa8
rtpbin: remove ptdemux ghostpads
2009-08-11 02:30:44 +01:00
Wim Taymans
7d9c2d20df
rtpbin: add to new signal to remove SSRC pads
2009-08-11 02:30:44 +01:00
Ali Sabil
6c684e59c6
ssrcdemux: emit signal when pads are removed
...
Add action signal to clear an SSRC in the ssrc demuxer.
Add signal to notify of removed ssrc.
See #554839
2009-08-11 02:30:44 +01:00
Wim Taymans
48872d8215
rtpbin: use our ghostpads instead of its target
...
Since we keep a reference to our ghostpads, we can use them to track sessions.
This avoid us having to mess with the target of the ghostpad.
2009-08-11 02:30:44 +01:00
Wim Taymans
901b7f3b69
rtpbin: don't warn when getting request pads twice
...
Allow getting the request pads multiple times, just return the previously
created pads.
2009-08-11 02:30:44 +01:00
Wim Taymans
0ae6e3603b
rtpsource: add RTP and RTCP source address
...
Add the RTP and RTCP sender addresses in the stats structure.
2009-08-11 02:30:44 +01:00
Wim Taymans
62727e8fab
rtpsession: reuse source code for SDES
...
Reuse the RTPSource object property instead of duplicating code.
2009-08-11 02:30:44 +01:00
Wim Taymans
1719af9113
rtpbin: set target state on new elements
...
Set the state on newly added elements to the state of the parent.
Add some debug info and do some cleanups
2009-08-11 02:30:43 +01:00
Wim Taymans
9c92ee6209
rtpbin: unref requests pads after releasing
2009-08-11 02:30:43 +01:00
Olivier Crête
a1c0bb2488
rtpbin: Implement releasing the streams
...
See #561752
2009-08-11 02:30:43 +01:00
Olivier Crête
e77542d350
rtpbin: Keep jb signals handler
...
Keep the signal handlers so they can be disconnected at release time
See #561752
2009-08-11 02:30:43 +01:00
Wim Taymans
59d0590cd7
rtpbin: use the right lock for the sessions
...
Use the right lock when iterating the sessions.
2009-08-11 02:30:42 +01:00
Olivier Crête
a9d6f3558c
rtpbin: Free session if request pads are released
...
Free the session when all the request pads are released.
Don't mess with the session list in free_session as it is called from a foreach
on that list.
Set the state of the upstream element to NULL first.
See #561752
2009-08-11 02:30:42 +01:00
Olivier Crête
46388b767f
rtpbin: Implement relasing of the rtp recv pad
2009-08-11 02:30:42 +01:00
Olivier Crête
3509098468
rtpbin: Implement releasing of rtp send pads
2009-08-11 02:30:42 +01:00