Commit graph

15 commits

Author SHA1 Message Date
Nirbheek Chauhan
7e2b68fe2f plugins: Use stdint.h instead of _stdint.h
_stdint.h is generated by Autotools and we don't really need it. All
supported platforms now ship with stdint.h. The only stickler was MSVC,
and since Visual Studio 2015 it also ships stdint.h now.
2016-08-19 14:42:52 +01:00
Vineeth TM
8cdfb13658 bad: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763081
2016-03-24 14:56:51 +02:00
Peter Seiderer
df4ef4be39 fbdevsink: fix bytes per pixel calculation
Simple pipeline

	$ gst-launch-1.0 videotestsrc ! fbdevsink

crashes with SIGSEGV in case the frambuffer xres is smaller
than the virtual xres resolution, e.g.:

	$ fbset

  mode "800x480-0"
          # D: 0.000 MHz, H: 0.000 kHz, V: 0.000 Hz
          geometry 800 480 1920 1200 16
          timings 0 0 0 0 0 0 0
          accel true
          rgba 5/11,6/5,5/0,0/0
  endmode

Debug:
	$ gdb gst-launch-1.0
  (gdb) run videotestsrc ! fbdevsink
  (gdb) where
  #0  0xb6bd2d24 in __memcpy_neon ()
      at ../sysdeps/arm/armv7/multiarch/memcpy_impl.S:591
  #1  0xb69b04e8 in gst_fbdevsink_show_frame (videosink=0x10a3378,
      buf=0xb5c08838) at gstfbdevsink.c:269
  #2  0xb69e88c4 in gst_base_sink_do_preroll (sink=sink@entry=0x10a3378,
      obj=0xb5c08838, obj@entry=0xa0) at gstbasesink.c:2281
  #3  0xb69e92bc in gst_base_sink_do_sync (basesink=basesink@entry=0x10a3378,
      obj=0xa0, obj@entry=0xb5c08838, late=0x0, late@entry=0xb6548ba0,
      step_end=0x140, step_end@entry=0xb6548ba4) at gstbasesink.c:2500
  #4  0xb69ea67c in gst_base_sink_chain_unlocked (
      basesink=basesink@entry=0x10a3378, obj=0x0, obj@entry=0xb5c08838,
      is_list=is_list@entry=0, pad=<optimized out>) at gstbasesink.c:3486
  #5  0xb69ec1c0 in gst_base_sink_chain_main (basesink=0x10a3378,
      pad=<optimized out>, obj=0xb5c08838, is_list=0) at gstbasesink.c:3647
  #6  0xb6eb5b10 in gst_pad_chain_data_unchecked (pad=0x10a6170,
      type=<optimized out>, data=0xb5c08838) at gstpad.c:4086
  #7  0xb6eb7a34 in gst_pad_push_data (pad=pad@entry=0x10a6020,
      type=type@entry=4112, data=0xb5c08838) at gstpad.c:4338
  #8  0xb6ebf344 in gst_pad_push (pad=pad@entry=0x10a6020,
      buffer=<optimized out>) at gstpad.c:4454
  #9  0xb69f22f0 in gst_base_src_loop (pad=0x10a6020) at gstbasesrc.c:2845
  #10 0xb6eeddfc in gst_task_func (task=0x10a8828) at gsttask.c:331
  #11 0xb6d485a0 in g_thread_pool_thread_proxy (data=<optimized out>)
   at gthreadpoQuit
  (gdb) frame 1
  #1  0xb69b04e8 in gst_fbdevsink_show_frame (videosink=0x10a3378,
      buf=0xb5c08838) at gstfbdevsink.c:269
  269     gstfbdevsink.c: No such file or directory.
  (gdb) p fbdevsink
  $1 = (GstFBDEVSink *) 0x10a3378
  (gdb) p *fbdevsink
  $2 = {videosink = {element = {element = {object = {object = {
              g_type_instance = {g_class = 0x10a2d60}, ref_count = 3,
              qdata = 0x0}, lock = {p = 0x0, i = {0, 0}},
            name = 0x10a2f30 "fbdevsink0", parent = 0x10a70a0, flags = 32,
            control_bindings = 0x0, control_rate = 100000000,
            last_sync = 18446744073709551615, _gst_reserved = 0x0},
          state_lock = {p = 0x109f9a8, i = {0, 0}}, state_cond = {p = 0x0, i = {
              3, 0}}, state_cookie = 2, target_state = GST_STATE_PAUSED,
          current_state = GST_STATE_READY, next_state = GST_STATE_PAUSED,
          pending_state = GST_STATE_PAUSED,
          last_return = GST_STATE_CHANGE_ASYNC, bus = 0x108bcb8, clock = 0x0,
          base_time = 0, start_time = 0, numpads = 1, pads = 0x109cc20,
          numsrcpads = 0, srcpads = 0x0, numsinkpads = 1, sinkpads = 0x109cc30,
          pads_cookie = 1, _gst_reserved = {0x0, 0x0, 0x0, 0x0}},
        sinkpad = 0x10a6170, pad_mode = GST_PAD_MODE_PUSH, offset = 0,
        can_activate_pull = 0, can_activate_push = 1, preroll_lock = {p = 0x1,
          i = {1, 0}}, preroll_cond = {p = 0x0, i = {0, 0}}, eos = 0,
        need_preroll = 1, have_preroll = 0, playing_async = 1,
        have_newsegment = 1, segment = {flags = GST_SEGMENT_FLAG_NONE, rate = 1,
          applied_rate = 1, format = GST_FORMAT_TIME, base = 0, offset = 0,
          start = 0, stop = 18446744073709551615, time = 0, position = 33333333,
          duration = 18446744073709551615, _gst_reserved = {0x0, 0x0, 0x0,
            0x0}}, clock_id = 0x0, sync = 1, flushing = 0, running = 0,
        max_lateness = 20000000, priv = 0x10a3188, _gst_reserved = {
          0x0 <repeats 20 times>}}, width = 0, height = 0, priv = 0x10a3180,
      _gst_reserved = {0x0, 0x0, 0x0, 0x0}}, fixinfo = {
      id = '\000' <repeats 15 times>, smem_start = 1078984704,
      smem_len = 4608000, type = 0, type_aux = 0, visual = 2, xpanstep = 1,
      ypanstep = 1, ywrapstep = 0, line_length = 3840, mmio_start = 0,
      mmio_len = 0, accel = 0, capabilities = 0, reserved = {0, 0}}, varinfo = {
    xres = 800, yres = 480, xres_virtual = 1920, yres_virtual = 1200,
    xoffset = 0, yoffset = 0, bits_per_pixel = 16, grayscale = 0, red = {
      offset = 11, length = 5, msb_right = 0}, green = {offset = 5,
      length = 6, msb_right = 0}, blue = {offset = 0, length = 5,
      msb_right = 0}, transp = {offset = 0, length = 0, msb_right = 0},
      nonstd = 0, activate = 0, height = 4294967295, width = 4294967295,
      accel_flags = 1, pixclock = 0, left_margin = 0, right_margin = 0,
      upper_margin = 0, lower_margin = 0, hsync_len = 0, vsync_len = 0,
      sync = 0, vmode = 0, rotate = 0, colorspace = 0, reserved = {0, 0, 0, 0}},
    fd = 5,
    framebuffer = 0xb654a000 <error: Cannot access memory at address 0xb654a000>, device = 0x10a38d8 "/dev/fb0", width = 320, height = 240, cx = 240, cy = 120,
    linelen = 1280, lines = 240, bytespp = 4, fps_n = 30, fps_d = 1}
  (gdb) p map
  $3 = {memory = 0xb5d24008, flags = GST_MAP_READ,
    data = 0xb5d24058 '\377' <repeats 90 times>, "\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\340\377\377\a\377\a\377\a\377\a\377\a\377\a\377\a\377\a\377\a"...,
    size = 153600, maxsize = 153603, user_data = {0x0,
      0xb69e3ba4 <gst_base_sink_set_last_buffer_unlocked+92>, 0x10a3378, 0x0},
    _gst_reserved = {0x1, 0x10a3378, 0xb6f50dd8 <_gst_debug_min>, 0xb5c08838}}
  (gdb) p i
  $4 = 121

Fix this by changing the fbdevsink->bytespp calculation using
the frame buffer xres_virtual size instead of xres.

https://bugzilla.gnome.org/show_bug.cgi?id=762482
2016-02-23 11:36:57 +02:00
Tim-Philipp Müller
ae550222a8 fbdev: port fbdevsink to 1.0 2013-03-09 00:20:00 +00:00
Tim-Philipp Müller
9e1b75fda3 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:09:59 +00:00
Tim-Philipp Müller
32ba17cd0f Use gst_element_class_set_static_metadata()
where possible. Avoids some string copies. Also re-indent
some stuff. Also some indent fixes here and there.
2012-10-17 17:46:34 +01:00
Mark Nauwelaerts
578861abea replace gst_element_class_set_details_simple with gst_element_class_set_metadata 2012-09-14 17:27:49 +02:00
Sebastian Dröge
cda192b3b7 gst: Update for GST_PLUGIN_DEFINE() API changes 2012-04-05 18:02:56 +02:00
Debarshi Ray
335293bf50 Remove unused but set variables
This is needed to satisfy the new -Wunused-but-set-variable added in
GCC 4.6: http://gcc.gnu.org/gcc-4.6/changes.html
2011-06-04 20:26:02 +01:00
Benjamin Otte
775c7584fd gst_element_class_set_details => gst_element_class_set_details_simple 2010-03-18 22:46:41 +01:00
Luotao Fu
382bbcbd2b sys/fbdev/gstfbdevsink.c: Fix the Depth calculation.
Original commit message from CVS:
Patch by: Luotao Fu <l dot fu at pengutronix dot de>
* sys/fbdev/gstfbdevsink.c: (gst_fbdevsink_getcaps):
Fix the Depth calculation.
Fixes #564114.
2008-12-23 12:25:47 +00:00
Mark Nauwelaerts
18d7934ae3 Use configure-generated _stdint.h.
Original commit message from CVS:
* ext/x264/gstx264enc.h:
* sys/fbdev/gstfbdevsink.c:
Use configure-generated _stdint.h.
2008-08-08 10:56:02 +00:00
Jens Granseuer
266e4741cd Some C89 fixes, moving variable declarations to the beginning of a block. Fixes bug #517937.
Original commit message from CVS:
Patch by: Jens Granseuer <jensgr at gmx dot net>
* gst/librfb/gstrfbsrc.c: (gst_rfb_property_set_version):
* gst/librfb/rfbdecoder.c: (rfb_decoder_message_set_encodings),
(rfb_decoder_state_set_encodings):
* gst/mpegtsparse/mpegtspacketizer.c:
(mpegts_packetizer_parse_nit), (mpegts_packetizer_parse_sdt),
(mpegts_packetizer_parse_eit):
* sys/fbdev/gstfbdevsink.c: (gst_fbdevsink_getcaps),
(gst_fbdevsink_setcaps), (gst_fbdevsink_render):
Some C89 fixes, moving variable declarations to the beginning
of a block. Fixes bug #517937.
2008-02-22 05:33:59 +00:00
Sebastian Dröge
fc50684825 sys/fbdev/gstfbdevsink.c: Free the device string in finalize. Fixes bug #515722.
Original commit message from CVS:
* sys/fbdev/gstfbdevsink.c: (gst_fbdevsink_class_init),
(gst_fbdevsink_finalize):
Free the device string in finalize. Fixes bug #515722.
2008-02-11 13:34:47 +00:00
Sean D'Epagnier
7a2ab45440 Add fbdev-based video sink. Linux-only. See bug #506549.
Original commit message from CVS:
Patch by: Sean D'Epagnier <sean@depagnier.com>
* configure.ac:
* sys/Makefile.am:
* sys/fbdev/Makefile.am:
* sys/fbdev/gstfbdevsink.c:
* sys/fbdev/gstfbdevsink.h:
Add fbdev-based video sink.  Linux-only.  See bug #506549.
2008-01-06 22:00:32 +00:00