There is no point in having an endian marker on 8 bit bayer format names since
it is just one byte. Thus remove it.
This also fixes an incompatibility with plugins bad where there is no endian
marker on 8 bit bayer format names as well.
Fixes: #3729
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7826>
Some servers (e.g. Axis cameras) expect the client to propose the encryption
key(s) to be used for SRTP / SRTCP. This is required to allow re-keying so
as to evade cryptanalysis. Note that the behaviour is not specified by the
RFCs. By setting the 'client-managed-mikey-mode' property to 'true', rtspsrc
acts as follows:
* For a secured profile (RTP/SAVP or RTP/SAVPF), any media in the SDP
returned by the server for which a MIKEY key management applies is
elligible for client managed mode. The MIKEY from the server is then
ignored.
* rtspsrc sends a SETUP with a MIKEY payload proposed by the user. The
payload is formed by calling the 'request-rtp-key' signal for each
elligible stream. During initialisation, 'request-rtcp-key' is also
called as usual. The keys returned by both signals should be the same
for a single stream, but the mechanism allows a different approach.
* The user can start re-keying of a stream by calling SET_PARAMETER.
The convenience signal 'set-mikey-parameter' can be used to build a
'KeyMgmt' parameter with a MIKEY payload.
* After the server accepts the new parameter, the user can call
'remove-key' and prepare for the new key(s) to be served by signals
'request-rtp-key' & 'request-rtcp-key'.
* The signals 'soft-limit' & 'hard-limit' are called when a key
reaches the limits of its utilisation.
This commit adds support for:
* client-managed MIKEY mode to srtpsrc.
* Master Key Index (MKI) parsing and encoding to GstMIKEYMessage.
* re-keying using the signals 'set-mikey-parameter' & 'remove-key' and
then by serving the new key via 'request-rtp-key' & 'request-rtcp-key'.
* 'soft-limit' & 'hard-limit' signals, similar to those provided by srtpdec.
See also:
* https://www.rfc-editor.org/rfc/rfc3830
* https://www.rfc-editor.org/rfc/rfc4567
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7587>
Timestamps are untouched by default, but the new mode can now be enabled to replace RTP timestamps
with ones generated from the buffer PTS. Making it an enum in case different modes are needed in the future.
That allows for a rtpjitterbuffer to do proper drift compensation, so that the stream coming out of gst-rtsp-server
is not drifting compared to the pipeline clock and also not compared to the RTCP NTP times.
Most of the code is borrowed from rtpbasepayload, as it's exactly its behaviour which I wanted to bring here.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7526>
If two (or more) rtpfunnel elements are cascaded, then only one will
realistically have information on the particular ssrc that is in use for a
particular input stream. As such, any key unit requests may never reach the
corresponding encoder.
This has been discovered by combining simulcast and BUNDLE with webrtcbin.
simulcast uses one rtpfunnel, and BUNDLE uses another rtpfunnel.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7405>
Not doing so would mean that tags would be overidden by any tag events sent by
upstream. Also only send a tag event directly if upstream never sent one.
By default use GST_TAG_MERGE_REPLACE to override tags that exist in both the
upstream event and this element with the ones from this element, but provide a
new "merge-mode" property to adjust the behaviour.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7145>
Specify "layout" field in src template to make sure it's
set and gets fixated properly if the downstream element
supports both interleaved and non-interleaved caps.
Fixes
gst_pad_set_caps: assertion 'caps != NULL && gst_caps_is_fixed (caps)' failed
critical with e.g.
gst-launch-1.0 rtpdtmfsrc ! rtpdtmfdepay ! audioconvert ! fakesink
Not that the layout really matters in our case since we always
output mono anyway, but non-interleaved requires adding AudioMeta,
so this is the easiest fix.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7036>
Even if no new synchronization information is available.
This is necessary because the timestamp offset logic in rtpbin depends
on the base RTP time that is determined by the jitterbuffer, but this
changes all the time (especially in mode=slave) and the timestamp
offsets have to be updated accordingly. Doing so is especially important
if they're only determined by the RTP-Info, which never changes from the
very beginning.
The interval can be configured via the new min-sync-interval property.
Synchronization happens at least that often, but at most as often as the
old sync-interval property allows.
Both intervals are now based on the monotonic system clock.
Additionally, clean up synchronization code a bit, only emit either
inband NTP or RTCP SR synchronization at the same time, based on which
one has the more recent time information, and only emit RTP-Info
synchronization if it wasn't provided previously at the same time as the
NTP-based synchronization information.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
There is generally no requirement to ignore RTCP SR if the RTP time of
the SR differs a lot from the last received RTP packet. The mapping
between RTP and NTP time stays valid until there was a stream reset, in
which case we wouldn't use that information anyway.
When using rtcp-sync-send-time=false the default of 1s difference can
easily be exceeded, e.g. if encoding of the stream after capture adds
more than 1s of latency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Never is useful for some RTSP servers that report plain garbage both via
RTCP SR and RTP-Info, for example.
NTP is useful if synchronization should only ever happen based on RTCP
SR or NTP-64 RTP header extension.
Also slightly change the behaviour of always/initial to take RTP-Info
based synchronization into account too. It's supposed to give the same
values as the RTCP SR and is available earlier, so will generally cause
fewer synchronization glitches if it's made use of.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Apparently external-oes is not supported by the plugin as texture target,
while DMABuf uploading prefers it because it's zero copy.
This patch enables DMABuf uploading and rendering by using either 2D or
rectangle texture targets.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5795>
If this property is enabled then the jitterbuffer will do the normal PTS
calculations according to the configured mode instead of making use of
the RFC7273 media clock.
The timestamp calculated from the RFC7273 media clock will only be
stored in the reference timestamp meta, if addition of that meta is enabled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5512>
When this property is used, it is assumed that the system clock is
synced close enough to the media clock used by an RFC7273 stream.
As long as both clocks are at most a few seconds from each other this
will give the correct results and avoids having to create an actual
network clock that has to sync first.
If the system clock is actually synchronized to the media clock then
everything will behave exactly the same, otherwise the reference
timestamp meta will be correct but the buffer timestamps will be off by
the difference between the two clocks.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5512>
