Commit graph

38 commits

Author SHA1 Message Date
Arun Raghavan
f5bb377a78 pulse: Fix format info to caps conversion for PCM 2019-01-18 11:06:38 +00:00
Arun Raghavan
4e9a8e5883 Revert "pulsesrc: Move to extended stream API"
This reverts commit 4d67d1bd16.

Using the extended API for the capture path depends on a fix in
PulseAudio
(https://gitlab.freedesktop.org/pulseaudio/pulseaudio/merge_requests/49).

Until then, let's go back to the standard API.

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/issues/552
2019-01-18 11:06:38 +00:00
Arun Raghavan
4d67d1bd16 pulsesrc: Move to extended stream API
This is needed as a precursor to allowing capture of IEC61937
formats. We now also need to include the channel map while converting
format info to caps so that a correct channel mask is generated for
pulsesrc's caps.
2019-01-10 09:16:02 +00:00
Arun Raghavan
a24ef929a4 pulse: Expose the correct max rate that we support
PulseAudio defines PA_RATE_MAX as the maximum sampling rate that it
supports. We were previously exposing a maximum rate of INT_MAX, which
is incorrect, but worked because nothing was really using a rate greater
than 384000 kHz.

While playing DSD data, we hit a case where there might be very high
sample rates (>1MHz), and pulsesink fails during stream creation with
such streams because it erroneously advertises that it supports such
rates.

Since PA_RATE_MAX is #define'd to (8*48000U), we can't just use it in
the caps string. Instead, we fix up the rate to what we actually support
whenever we use our macro caps.
2018-11-19 21:28:25 +05:30
Wim Taymans
0421d40d9c pulse: add properties to GstDevice
Add the extra properties we get from pulse to the GstDevice we expose
with the device monitor
2015-07-15 18:29:21 +02:00
Tim-Philipp Müller
5f0ea73d28 pulse: fix format info to caps conversion for mulaw 2014-03-16 15:55:00 +00:00
Olivier Crête
e714ab9dba pulse: Make gst_pulse_format_info_to_caps() shared
https://bugzilla.gnome.org/show_bug.cgi?id=678402
2014-03-16 15:28:29 +00:00
Akihiro Tsukada
fda72021d2 pulsesink: Add support for AAC pass-through
https://bugzilla.gnome.org/show_bug.cgi?id=694445
2013-08-21 21:48:56 +02:00
Wim Taymans
8248ff8232 pulse: relax mulaw and alaw format checks
The audio library considers them as encoded formats and does not fill in the
sample width. The audio ringbuffers identifies the format as alaw/mulaw and that
is always 8 bits.
2013-07-12 12:32:42 +02:00
Arun Raghavan
7486e2fc53 Revert "pulsesink: Make 2.0 dependency optional"
This reverts commit 01457027e0.

We'll just depend on PulseAudio 2.0 or above instead of having the bug
partially fixed based on the installed libpulse version.
2013-06-13 14:23:08 +05:30
Arun Raghavan
01457027e0 pulsesink: Make 2.0 dependency optional
The getcaps function we added uses some pa_format_info_get_prop...
accessor functions that were only added in 2.0, so we only have our
getcaps implementation exist if we're compiling against libpulse 2.0 or
above.

Eventually, we could bump the minimum requirement to 2.0 or above.

https://bugzilla.gnome.org/show_bug.cgi?id=686459
2013-06-13 12:44:32 +05:30
Arun Raghavan
14e784f9fc pulsesink: Add a getcaps function
This allows us to have more fine-tuned caps in READY or above. However,
this is _really_ inefficient since we create a new stream and query sink
for every getcaps in READY, which on a simple gst-launch line happens
about 35 times. The next step is to cache getcaps results.

https://bugzilla.gnome.org/show_bug.cgi?id=686459
2013-06-10 13:05:24 +05:30
Sebastian Dröge
0726b71ceb ext/sys: Fix some compilation errors caused by circular includes 2012-12-12 17:35:04 +00:00
Tim-Philipp Müller
230cf41cc9 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:07:18 +00:00
Arun Raghavan
1a8512986a pulse: Clear unpositioned flag when setting positions
If converting a PA channel map to gst channel positions results in a
valid set of channel positions, we clear the unpositioned flag from the
ringbuffer spec.
2012-08-22 11:38:42 +02:00
Sebastian Dröge
dc049d1f1f pulse: Port to the new multichannel caps 2012-01-05 10:30:30 +01:00
Tim-Philipp Müller
2799bcd32e pulse: update for ring buffer audio format type enum rename 2011-12-25 21:45:45 +00:00
Tim-Philipp Müller
eeaa9e0bbc pulseaudio: require pulseaudio >= 1.0 2011-11-26 13:54:22 +00:00
Wim Taymans
1ad11e307a update for ringbuffer change 2011-11-11 11:24:00 +01:00
Thiago Santos
b09704020c pulse: port pulseutil to 0.11 2011-10-10 00:18:56 -03:00
Wim Taymans
e204c5934c -good: port to new audio caps 2011-09-06 13:16:27 +02:00
Wim Taymans
34ea60526d pulse: add some more channels 2011-08-24 18:44:01 +02:00
Wim Taymans
09b15d7dfe port to new audio caps. 2011-08-18 19:21:07 +02:00
Arun Raghavan
ac7cad431c pulsesink: Add support for compressed formats
This adds support for various compressed formats (AC3, E-AC3, DTS and
MP3) payloaded in IEC 61937 format (used for transmission over S/PDIF,
HDMI and Bluetooth).

The acceptcaps() function allows bins to probe for what formats the sink
being connected to support. This only works after the element is set to
at least READY.

If the underlying sink changes and the format we are streaming is not
available, we emit a message that will allow upstream elements/bins to
block and renegotiate a new format.
2011-07-29 01:25:15 +05:30
Arun Raghavan
a67b536741 pulsesink: Use the extended stream API if available
This uses the new extended API for creating streams. This will allow us
to support compressed formats natively in pulsesink as well.
2011-07-29 01:25:15 +05:30
Arun Raghavan
04786a6d31 pulse: Drop support for PA versions before 0.9.16
This drops support fof PulseAudio versions prior to 0.9.16, which was
released about 1.5 years ago. Testing with very old versions is not
feasible and we don't want to maintain 2 independent code-paths.
2011-06-21 16:47:11 -07:00
Pino Toscano
b52c7ebd19 pulse: Define PATH_MAX if it isn't defined
GNU Hurd for example doesn't define it.
2011-05-16 09:04:31 +02:00
Stefan Kost
f604e20499 pulse: allow setting stream properties
Add a "properties" property to the elements to allow setting extra stream
properties.

Fixes #537544
2010-09-07 14:20:21 +03:00
Philippe Normand
39d2ef5136 pulseutil: include pid value in gst_pulse_client_name() fallback return value
Fixes bug #627162
2010-09-04 14:52:06 +02:00
Benjamin Otte
9715238056 pulse: Style fix: use g_strdup() instead of printf()ing a simple string 2010-06-02 14:20:26 +02:00
Sebastian Dröge
ef8d113a73 pulse: Don't compare values of two different enum types 2010-04-30 22:22:25 +02:00
Mark Nauwelaerts
5a082af3aa pulse: use #ifdef rather than #if conditionals 2010-03-18 12:44:53 +01:00
Wim Taymans
ab3bed81a5 pulsesink: add 24bit sample formats
Add check for pulseaudio 0.9.15 and enable 24bits samples in that case.
2009-07-14 16:14:34 +02:00
Wim Taymans
28d733d53b pulse: remove some stray debug lines 2009-04-09 17:26:20 +02:00
Jan Schmidt
0037635bf2 Rewrite the pulse plugin, conditionally enabling new behaviour with
newer pulseaudio.

Fixes: #567794

* Hook pulsesink's volume property up with the stream volume -- not the
  sink volume in PA.

* Read the device description directly from the sink instead of going
  via the mixer.

* Properly implement _reset() methods for both sink and source to avoid
  deadlocks when shutting down a pipeline.

* Replace all simple pa_threaded_mainloop_wait() by proper loops to
  guarantee that we wait for the right event in case multiple events are
  fired.  While this is not strictly necessary in many cases it
  certainly is more correct and makes me sleep better at night.

* Replace CHECK_DEAD_GOTO macros with proper functions

* Extend the number of supported channels to 32 since that is the actual
  limit in PA.

* Get rid of _dispose() methods since we don't need them.

* Increase the volume property upper limit of the sink to 1000.

* Reset function pointers after we disconnect a stream/context. Better
  fix for bug 556986.

* Reset the state of the element properly if open/prepare fails

* Cork the PA stream when the pipeline is paused. This allows the PA
* daemon to
  close audio device on pause and thus save a bit of power.

* Set PA stream properties based on GST tags such as GST_TAG_TITLE,
  GST_TAG_ARTIST, and so on.

Signed-off-by: Lennart Poettering <lennart@poettering.net>
2009-01-28 20:34:40 +00:00
Sebastian Dröge
95d4239819 ext/pulse/: Use GST_BOILERPLATE everywhere and fix coding style at some places.
Original commit message from CVS:
* ext/pulse/pulsemixer.c: (gst_pulsemixer_class_init),
(gst_pulsemixer_set_property), (gst_pulsemixer_get_property):
* ext/pulse/pulsemixerctrl.c: (gst_pulsemixer_ctrl_subscribe_cb),
(gst_pulsemixer_ctrl_open), (gst_pulsemixer_ctrl_timeout_event),
(gst_pulsemixer_ctrl_set_volume):
* ext/pulse/pulsemixertrack.c: (gst_pulsemixer_track_new):
* ext/pulse/pulseprobe.c: (gst_pulseprobe_open):
* ext/pulse/pulsesink.c: (gst_pulsesink_class_init),
(gst_pulsesink_init), (gst_pulsesink_open),
(gst_pulsesink_prepare), (gst_pulsesink_write),
(gst_pulsesink_delay), (gst_pulsesink_reset):
* ext/pulse/pulsesrc.c: (gst_pulsesrc_class_init),
(gst_pulsesrc_init):
Use GST_BOILERPLATE everywhere and fix coding style at some places.
Fix a locking issue in pulsesink's prepare function.
* ext/pulse/pulseutil.c: (gst_pulse_channel_map_to_gst):
Check if the created channel layout is valid for GStreamer.
2008-08-20 17:46:48 +00:00
Sebastian Dröge
4ab89b397e ext/pulse/: If downstream provides no channel layout and >2 channels should be used use the default layout that pulse...
Original commit message from CVS:
* ext/pulse/pulsesrc.c: (gst_pulsesrc_class_init),
(gst_pulsesrc_create_stream), (gst_pulsesrc_negotiate),
(gst_pulsesrc_prepare):
* ext/pulse/pulseutil.c: (gst_pulse_gst_to_channel_map),
(gst_pulse_channel_map_to_gst):
* ext/pulse/pulseutil.h:
If downstream provides no channel layout and >2 channels should be
used use the default layout that pulseaudio chooses and also
add this layout to the caps. Fixes bug #547258.
2008-08-20 17:17:55 +00:00
Sebastian Dröge
f3b03cd773 Add pulseaudio GStreamer element from gst-pulse. Development will continue here instead of pulseaudio SVN. Fixes bug ...
Original commit message from CVS:
* configure.ac:
* ext/pulse/Makefile.am:
* ext/pulse/plugin.c: (plugin_init):
* ext/pulse/pulsemixer.c: (gst_pulsemixer_interface_supported),
(gst_pulsemixer_implements_interface_init),
(gst_pulsemixer_init_interfaces), (gst_pulsemixer_base_init),
(gst_pulsemixer_class_init), (gst_pulsemixer_init),
(gst_pulsemixer_finalize), (gst_pulsemixer_set_property),
(gst_pulsemixer_get_property), (gst_pulsemixer_change_state):
* ext/pulse/pulsemixer.h:
* ext/pulse/pulsemixerctrl.c:
(gst_pulsemixer_ctrl_context_state_cb),
(gst_pulsemixer_ctrl_sink_info_cb),
(gst_pulsemixer_ctrl_source_info_cb),
(gst_pulsemixer_ctrl_subscribe_cb),
(gst_pulsemixer_ctrl_success_cb), (gst_pulsemixer_ctrl_open),
(gst_pulsemixer_ctrl_close), (gst_pulsemixer_ctrl_new),
(gst_pulsemixer_ctrl_free), (gst_pulsemixer_ctrl_list_tracks),
(gst_pulsemixer_ctrl_timeout_event), (restart_time_event),
(gst_pulsemixer_ctrl_set_volume), (gst_pulsemixer_ctrl_get_volume),
(gst_pulsemixer_ctrl_set_record), (gst_pulsemixer_ctrl_set_mute):
* ext/pulse/pulsemixerctrl.h:
* ext/pulse/pulsemixertrack.c: (gst_pulsemixer_track_class_init),
(gst_pulsemixer_track_init), (gst_pulsemixer_track_new):
* ext/pulse/pulsemixertrack.h:
* ext/pulse/pulseprobe.c: (gst_pulseprobe_context_state_cb),
(gst_pulseprobe_sink_info_cb), (gst_pulseprobe_source_info_cb),
(gst_pulseprobe_invalidate), (gst_pulseprobe_open),
(gst_pulseprobe_enumerate), (gst_pulseprobe_close),
(gst_pulseprobe_new), (gst_pulseprobe_free),
(gst_pulseprobe_get_properties), (gst_pulseprobe_needs_probe),
(gst_pulseprobe_probe_property), (gst_pulseprobe_get_values),
(gst_pulseprobe_set_server):
* ext/pulse/pulseprobe.h:
* ext/pulse/pulsesink.c: (gst_pulsesink_base_init),
(gst_pulsesink_class_init), (gst_pulsesink_init),
(gst_pulsesink_destroy_stream), (gst_pulsesink_destroy_context),
(gst_pulsesink_finalize), (gst_pulsesink_dispose),
(gst_pulsesink_set_property), (gst_pulsesink_get_property),
(gst_pulsesink_context_state_cb), (gst_pulsesink_stream_state_cb),
(gst_pulsesink_stream_request_cb),
(gst_pulsesink_stream_latency_update_cb), (gst_pulsesink_open),
(gst_pulsesink_close), (gst_pulsesink_prepare),
(gst_pulsesink_unprepare), (gst_pulsesink_write),
(gst_pulsesink_delay), (gst_pulsesink_success_cb),
(gst_pulsesink_reset), (gst_pulsesink_change_title),
(gst_pulsesink_event), (gst_pulsesink_get_type):
* ext/pulse/pulsesink.h:
* ext/pulse/pulsesrc.c: (gst_pulsesrc_interface_supported),
(gst_pulsesrc_implements_interface_init),
(gst_pulsesrc_init_interfaces), (gst_pulsesrc_base_init),
(gst_pulsesrc_class_init), (gst_pulsesrc_init),
(gst_pulsesrc_destroy_stream), (gst_pulsesrc_destroy_context),
(gst_pulsesrc_finalize), (gst_pulsesrc_dispose),
(gst_pulsesrc_set_property), (gst_pulsesrc_get_property),
(gst_pulsesrc_context_state_cb), (gst_pulsesrc_stream_state_cb),
(gst_pulsesrc_stream_request_cb), (gst_pulsesrc_open),
(gst_pulsesrc_close), (gst_pulsesrc_prepare),
(gst_pulsesrc_unprepare), (gst_pulsesrc_read),
(gst_pulsesrc_delay), (gst_pulsesrc_change_state),
(gst_pulsesrc_get_type):
* ext/pulse/pulsesrc.h:
* ext/pulse/pulseutil.c: (gst_pulse_fill_sample_spec),
(gst_pulse_client_name), (gst_pulse_gst_to_channel_map):
* ext/pulse/pulseutil.h:
Add pulseaudio GStreamer element from gst-pulse. Development will
continue here instead of pulseaudio SVN. Fixes bug #400679.
Only changes over gst-pulse SVN are added copyright to the top of
files and coding style changes.
2008-06-10 06:45:33 +00:00