Otherwise there is a pretty rare race where we get the
_initialize_stack_func executed leading to the stack set up and
the source pushing buffers before the composition source pad is
activated, and a STREAM_ERROR is reported as we end up pushing a
buffer to a flushing pad.
Thanks rr chaos mode for showing that improbable race
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/175>
The property had been deprecated and is unused.
This property is not needed. Any internal time effect that an nleoperation
wraps is itself responsible for converting seek/segment timestamps.
Previously, the ghostpads were performing a rate conversion after the
rate element had already done so, essentially doubling their effect on
seeks and segment times. This was always unnecessary, but went unnoticed
by the tempochange test because it was using an identity element rather
than an actual rate-changing element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/160>
Instead of doing it at the time of resetting `object->in_composition`
when user calls `gst_bin_remove` do it after we actually removed
it from the object thread, and do it in the `nle_object_reset`
method where it belongs
Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/issues/96
nleobject.duration defaults to 0, but this is pretty unintuitive for
end user in the case nlesource is use standalone, just consider
duration=0 equivalent to duration=GST_CLOCK_TIME_NONE as it makes
the element much simpler to use, we could actually forbid 0 as a value
in the future.
Also take into account potential CLOCK_TIME_NONE
When a composition is nested into anotherone, we *know* that the
toplevel composition is going to send a stack initializing seek,
we can thus avoid sending it on the subcomposition itself when
prerolling. This avoid seeking roundtrips and we now have one and
only one seek travelling in the overall pipeline (after it has
prerolled).
The 'start' of nleobject is in the 'composition' scale, inpoint is in
the media scale, when outside a composition, a nleobject->start value
doesn't mean anything.
Instead of seeking each nleobject separately to setup new stack, wait
for the whole stack to preroll and then seek that newly setup stack,
leading to the same code path and seek 'tweaking' as when processing
a seek on the composition (without stack changes).
This is mandatory to properly handle filter that tweak segments to handle
time remapping for example.
By passing NULL to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
When we have nested timelines, we need to make sure the underlying
formatted file is reloaded when commiting the main composition to
take into account the new timeline.
In other to make the implementation as simple as possible we make
sure that whenever the toplevel composition is commited, the decodebin
holding the gesdemux is torn down so that a new demuxer is created
with the new content of the timeline.
To do that a we do a NleCompositionQueryNeedsTearDown query to which
gesdemux answers leading to a full nlecomposition stack
deactivation/activation cycle.
Make sure that an event resulting from the seek happens before removing
the pad probe, dropping anything while it is not the case.
This guarantees that the seek happens before `nlesource` outputs
anything. This was not necessary as with decodebin or usual source
flushing seeks lead to synchronous flush_start/flush_stop and we could
safely assume that once the seek is sent, it was happenning.
With nested `nlecomposition` this assumption is simply not true as
in the composition seeks are basically cached and happen later in
the composition updating thread.
This fixes races where we ended up removing the blocking probe before
the seek actually started to be executed in the nlecomposition
nested inside an nlesource which leaded to data from *before* the seek
to be outputed which means we could display wrong frames,
and it was leading to interesting deadlocks.
Seeks that lead to a stack change lead to deactivating the current
stack. At that point we explicitely flush downstream as a reaction to
the flushing seek. Until now those flushes had a random seqnum, this
fails if we are a nested compostion as the parent composition will end
up dropping that flush which in turns might lead to deadlocks. For
example, the flush goes through a `compositor` which wants to flush
downstream to stop its srcpad task, but that flush wouldn't have
"released" its srcpad thread if the composition srcpad drops it, meaning
it won't be able to stop the task ever.
Otherwise if we shutdown a composition whith an nested composition
(inside a source in the test) and leak it, we end up with the nested
composition task still running (in READY) which is bad.
Add a test for that which leaks the pipeline on purpose.
Otherwise there is a race where we trigger the seek at the exact
same time the composition is being teared down potentially leading
to basesrc restarting its srcpad task which ends up being leaked.
Fixes ges.playback.scrub_backward_seeking.test_title.audio_video.vorbis_theora_ogg
and probably all its friends timeouting with the following stack trace:
(gdb) t a a bt
Thread 4 (Thread 0x7f5962acd700 (LWP 19997)):
#0 0x00007f5976713efd in syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
#1 0x00007f5976a9d3f3 in g_cond_wait (cond=cond@entry=0x7f5938125410, mutex=mutex@entry=0x7f59381253c8) at gthread-posix.c:1402
#2 0x00007f5976c9e26b in gst_task_func (task=0x7f59381253b0 [GstTask]) at ../subprojects/gstreamer/gst/gsttask.c:313
#3 0x00007f5976a7ecb3 in g_thread_pool_thread_proxy (data=<optimized out>) at gthreadpool.c:307
#4 0x00007f5976a7e2aa in g_thread_proxy (data=0x7f5954071d40) at gthread.c:784
#5 0x00007f59767ea58e in start_thread (arg=<optimized out>) at pthread_create.c:486
#6 0x00007f59767196a3 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Thread 3 (Thread 0x7f5963fff700 (LWP 19995)):
#0 0x00007f597670e421 in __GI___poll (fds=0xe32da0, nfds=2, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
#1 0x00007f5976a553a6 in g_main_context_poll (priority=<optimized out>, n_fds=2, fds=0xe32da0, timeout=<optimized out>, context=0xe31ff0) at gmain.c:4221
#2 0x00007f5976a553a6 in g_main_context_iterate (context=0xe31ff0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3915
#3 0x00007f5976a55762 in g_main_loop_run (loop=0xe32130) at gmain.c:4116
#4 0x00007f59768db10a in gdbus_shared_thread_func (user_data=0xe31fc0) at gdbusprivate.c:275
#5 0x00007f5976a7e2aa in g_thread_proxy (data=0xe1b8a0) at gthread.c:784
#6 0x00007f59767ea58e in start_thread (arg=<optimized out>) at pthread_create.c:486
#7 0x00007f59767196a3 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Thread 2 (Thread 0x7f5968dcc700 (LWP 19994)):
#0 0x00007f597670e421 in __GI___poll (fds=0xe1bcc0, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
#1 0x00007f5976a553a6 in g_main_context_poll (priority=<optimized out>, n_fds=1, fds=0xe1bcc0, timeout=<optimized out>, context=0xe1b350) at gmain.c:4221
#2 0x00007f5976a553a6 in g_main_context_iterate (context=context@entry=0xe1b350, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3915
#3 0x00007f5976a554d0 in g_main_context_iteration (context=0xe1b350, may_block=may_block@entry=1) at gmain.c:3981
#4 0x00007f5976a55521 in glib_worker_main (data=<optimized out>) at gmain.c:5861
#5 0x00007f5976a7e2aa in g_thread_proxy (data=0xe1b800) at gthread.c:784
#6 0x00007f59767ea58e in start_thread (arg=<optimized out>) at pthread_create.c:486
#7 0x00007f59767196a3 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Thread 1 (Thread 0x7f5975df4fc0 (LWP 19993)):
#0 0x00007f5976713efd in syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
#1 0x00007f5976a9d3f3 in g_cond_wait (cond=cond@entry=0xe34020, mutex=0xe39b80) at gthread-posix.c:1402
#2 0x00007f5976a7f41c in g_thread_pool_free (pool=0xe34000, immediate=0, wait_=<optimized out>) at gthreadpool.c:776
#3 0x00007f5976c9f1ca in default_cleanup (pool=0xe256b0 [GstTaskPool]) at ../subprojects/gstreamer/gst/gsttaskpool.c:89
#4 0x00007f5976c9e32d in init_klass_pool (klass=<optimized out>) at ../subprojects/gstreamer/gst/gsttask.c:161
#5 0x00007f5976c9e502 in gst_task_cleanup_all () at ../subprojects/gstreamer/gst/gsttask.c:381
#6 0x00007f5976c214f4 in gst_deinit () at ../subprojects/gstreamer/gst/gst.c:1095
#7 0x000000000040394f in main (argc=6, argv=<optimized out>) at ../subprojects/gst-editing-services/tools/ges-launch.c:94
This commit is to ensure cleanup internal elements on state change failure.
nlecomposition posts its own error message after cleanup child.
If we don't suppress child error, meanwhile, an application
triggered downward state change (resulting from child error message)
might be able to reach nlecomposition before internal cleaning child up.
That eventually results to downward state change failure.
