Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c: (test_stop_from_app):
Attempt to 'fix' spuriously failing test case: it seems like the
timeout of half a second is simply too small when the system is under
load otherwise, and the timeout doesn't really seem to serve any
particular purpose here. Give the pipeline a few seconds to preroll
first, and then give it another half a second to go from PAUSED to
PLAYING and marshal the message into the main thread.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (block_callback),
(GST_START_TEST), (gst_ghost_pad_suite):
Added some more ghostpad tests, mainly blocking
and probes.
Original commit message from CVS:
Patch by: Wouter Paesen <wouter at kangaroot net>
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
Fix controlling of float properties (#344849).
* tests/check/libs/controller.c:
(gst_test_mono_source_get_property),
(gst_test_mono_source_set_property),
(gst_test_mono_source_class_init), (GST_START_TEST):
While we're at it, add some float stuff to unit test.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
* libs/gst/check/gstcheck.h:
factor out the method from tests that checks size of structures,
and add code to generate the header containing these sizes
* tests/check/gst/gstabi.c: (GST_START_TEST):
* tests/check/gst/struct_i386.h:
* tests/check/libs/libsabi.c: (GST_START_TEST):
* tests/check/libs/struct_i386.h:
use it
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark):
* gst/gstpad.h:
Added _CUSTOM error and success GstFlowReturn that can be
used be elements internally.
Added macro to check for SUCCESS flowreturns.
API: GST_FLOW_CUSTOM_SUCCESS
API: GST_FLOW_CUSTOM_ERROR
API: GST_FLOW_IS_SUCCESS
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Added check for GstFlowReturn sanity.
Original commit message from CVS:
* tests/examples/helloworld/helloworld.c: (main):
Must plug audioconvert and audioresample between decoder
and audio sink.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_flags):
fix a leak if no flags are set
* tests/check/gst/gstvalue.c: (GST_START_TEST):
fix leak in tests
Original commit message from CVS:
* gst/gstevent.c: (_gst_event_initialize):
* gst/gstformat.c: (_gst_format_initialize):
make sure some essential types used by events are registered
as part of gst_init()
* gst/gstvalue.c: (gst_value_serialize_flags):
if no flags are set, serialize them to a value that represents NONE
so that deserializing them works
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
add tests for serialization and deserialization of flags
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
API: addition: gst_adapter_take_buffer()
* libs/gst/base/gstadapter.c: (gst_adapter_push),
(gst_adapter_peek), (gst_adapter_take), (gst_adapter_take_buffer),
(gst_adapter_available_fast):
* libs/gst/base/gstadapter.h:
Prepare for optimizing the hell out of this hugely inefficient
piece of code.
Added gst_adapter_take_buffer() so we can at least start thinking
about subbuffering and merging.
Added some comments.
* tests/check/Makefile.am:
* tests/check/libs/adapter.c: (GST_START_TEST),
(gst_adapter_suite), (main):
Added GstAdapter check.
Original commit message from CVS:
2006-04-29 Thomas Vander Stichele <thomas at apestaart dot org>
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
add more asserts on refcounts
do more cleanup at end of tests
fix test leaks showing in FC5
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_sync_values):
some little tuning
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
a new test for live value handling
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer):
Don't try to serialize a GValue with a NULL buffer.
Fixes#339821.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Added check for serialisation of NULL buffers.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontroller.h:
Added new method _unset_all() and fixed _unset()
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Added two testcases for new and fixed method
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_register),
(gst_element_factory_create), (gst_element_factory_make):
Some cleanups.
Fixed a FIXME.
Updated docs (Fixes#131079)
* gst/gstpluginfeature.c: (gst_plugin_feature_load):
Small cleanups.
* tests/check/gst/gstelement.c: (GST_START_TEST),
(gst_element_suite):
Added testcase for elementfactory class field.
Original commit message from CVS:
* gst/parse/grammar.y:
Fix a leak in parse-launch for any source-or-sink named element
references used.
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Unref the pipeline if it exists after we've failed parsing.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Unref a pad we reffed.
* tests/check/gst/gstutils.c: (GST_START_TEST):
Unref bins
Original commit message from CVS:
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix a variety of memleaks in sinks check, which are only sometimes
shown by running the tests under valgrind (weird?).
Original commit message from CVS:
* configure.ac:
* tests/check/Makefile.am:
disable some tests when we don't have a registry
* tests/check/gst/gstutils.c: (gst_utils_suite):
don't build the part that needs parsing
Original commit message from CVS:
* gst/gstbuffer.h:
* gst/gstevent.h:
* gst/gstmessage.h:
gst_[buffer|event|message]_ref() macros are replaced by a static
inline functions because gcc-4.1 will about if the return value
isn't used.
* tests/check/gst/gstevent.c: (event_probe):
gst_event_ref now has to be given a GstEvent* , fix check accordingly.
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_finalize):
Fix leaks in fakesrc.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix leaks in the testcase.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_entry_new),
(gst_clock_id_compare_func), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_id_unschedule),
(gst_clock_init), (gst_clock_get_internal_time),
(gst_clock_set_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property):
* gst/gstclock.h:
Review docs.
Small cleanups.
Fix a possible segfault when the window-size is made smaller.
Calculate jitter before performing the clock wait. Ideally
the clock implementation should calculate jitter but we need
API breakage for that.
* gst/gstsystemclock.c: (gst_system_clock_init):
Docs review.
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Remove leftover else
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(gst_systemclock_suite):
Added check to test GST_CLOCK_DIFF.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/basesrc.c: (eos_event_counter),
(basesrc_eos_events_pull), (basesrc_eos_events_push),
(basesrc_eos_events_push_live_op), (basesrc_eos_events_pull_live_op),
(gst_basesrc_suite), (main):
... and add some tests for the base source EOS stuff.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_buffer_probe_n_times):
Test case originally showed the problem fixed below,
but was then amended. Add checks back at the place
where they used to be.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (data_probe), (buffer_probe),
(event_probe), (GST_START_TEST):
Only events up to the pipeline EOS are counted, there are
some more when going to NULL currently which we don't care
about for now.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_parse_bin_from_description),
(gst_utils_suite):
Add some simple tests for gst_parse_bin_from_description() and
gst_bin_find_unconnected_pad() (#329069).
Original commit message from CVS:
* docs/design/part-element-sink.txt:
Updated document.
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_preroll_queue_flush),
(gst_base_sink_configure_segment), (gst_base_sink_commit_state),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_chain),
(gst_base_sink_loop), (gst_base_sink_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Totally refactored matching the design doc.
Use two segments, one to clip incomming buffers and another to
perform sync.
Handle queueing correctly, bypass the queue when playing.
Make EOS cancelable.
Handle errors correctly when operating in pull based mode.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Added new check for sinks.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_unlink_pads):
Don't leak pad references.
* tests/check/elements/fakesink.c: (GST_START_TEST):
* tests/check/generic/sinks.c: (GST_START_TEST):
* tests/check/generic/states.c: (GST_START_TEST):
* tests/check/gst/gstbin.c: (GST_START_TEST):
* tests/check/gst/gstcaps.c: (GST_START_TEST):
* tests/check/gst/gstelement.c: (GST_START_TEST):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstiterator.c: (GST_START_TEST):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Fix a bunch of leaks. Make generic/sinks.c
use a bit less cpu by slowing the buffer rate
between fakesrc and fakesink.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/gst/gstquery.c: (GST_START_TEST), (gstquery_suite),
(main):
Add a very simple check that should have caught the memleak I fixed
last night (if not for the slice allocator hiding it)
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/fakesink.c: (chain_async_buffer),
(chain_async), (chain_async_return), (GST_START_TEST),
(fakesink_suite), (main):
Added fakesink test that checks prerolling and clipping
behaviour.
* tests/check/gst/gstutils.c: (GST_START_TEST):
Make check run faster so that buildbots don't timeout.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* gst/gstminiobject.c: (gst_value_mini_object_lcopy):
Fix lcopy for mini objects, the mini object needs to be ref'ed.
* tests/check/gst/gstminiobject.c: (my_foo_init),
(my_foo_get_property), (my_foo_set_property), (my_foo_class_init),
(test_value_collection), (gst_mini_object_suite):
Add test to ensure refcounts end up as expected when passing
GstMiniObjects through g_object_get() and g_object_set().
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_link_prepare):
Don't allow activation of a srcpad in pull_range if it has no
getrange function.
Change some debug statements to be a little clearer
* plugins/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query):
Check that we have a peer before executing queries thereupon.
* tests/examples/metadata/read-metadata.c: (message_loop):
Use gst_bus_pop instead of gst_bus_poll when we just want it to
immediately return us any available message with 0 timeout.
Original commit message from CVS:
* gst/gstpluginfeature.c: (gst_plugin_feature_finalize),
(gst_plugin_feature_load):
more meaningful debug output
* configure.ac:
* tests/Makefile.am:
* tests/old/examples/Makefile.am:
make make distcheck happy again
Original commit message from CVS:
* tests/examples/typefind/typefind.c: (type_found):
* tests/examples/xml/runxml.c: (xml_loaded):
More gcc4 fixes and a mem leak fix.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_init),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Added more documentation.
Make sure the last_pos value is updated properly.
Make sure to_stream_time and to_running_time don't
operate on wrong values.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Update check.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/libsabi.c: (GST_START_TEST), (gstabi_suite),
(main):
* tests/check/libs/struct_i386.h:
Added ABI check for libs, this time for real
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstplugin.h:
* gst/gstregistry.h:
* tests/benchmarks/complexity.c:
* tests/benchmarks/mass-elements.c:
* tests/check/Makefile.am:
* tools/Makefile.am:
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
various fixes to make
--disable-nls --disable-registry --disable-loadsave --disable-parse --disable-gst-debug
work and get the core .so down to 360444 bytes after stripping
Original commit message from CVS:
* configure.ac:
* tests/bench-complexity.scm:
* tests/bench-mass_elements.scm:
* tests/complexity.c:
* tests/complexity.gnuplot:
* tests/instantiate/.cvsignore:
* tests/instantiate/Makefile.am:
* tests/instantiate/caps.c:
* tests/mass_elements.c:
* tests/network-clock-utils.scm:
* tests/network-clock.scm:
* tests/plot-data:
First pass at cleaning up tests/ dir before moving the rest
Combined with CVS surgery
Original commit message from CVS:
* check/Makefile.am:
look in the right place for elements, a lot more chance of
success
* gst/Makefile.am:
remove indexers and elements subdirs
* plugins/Makefile.am:
make indexers conditional
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST):
Updated check, add some scaling accuracy checking code.
* gst/gstutils.c: (gst_util_div128_64),
(gst_util_uint64_scale_int64), (gst_util_uint64_scale),
(gst_util_uint64_scale_int):
Fix 6 times faster division code. Optimize for common
1/1 and less common X/1 cases.
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
More checks.
* gst/gstclock.c: (gst_clock_finalize), (gst_clock_set_master),
(do_linear_regression), (gst_clock_add_observation):
Cleanups.
Release lock when the clock cannot be slaved.
Catch the case where the regression returned an invalid denominator.
* gst/gstutils.c: (gst_util_div128_64_iterate),
(gst_util_div128_64), (gst_util_uint64_scale_int64),
(gst_util_uint64_scale), (gst_util_uint64_scale_int):
Add protentially more performant non-iterative 128/64 divide function
that unfortunatly does not work yet.
Shortcut the trivial 0/X = 0 case.
Remove the warnings on overflow.
Original commit message from CVS:
* check/Makefile.am:
* check/elements/fdsrc.c: (GST_START_TEST):
Use a cmdline define to specify the location of a file to use for
testing, to avoid breaking distcheck.
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Added more checks for the high precision uint64 cases.
* gst/gstutils.c: (gst_util_uint64_scale_int64),
(gst_util_uint64_scale), (gst_util_uint64_scale_int):
Implement high precission (guint64 * guint64) / guint64.
Original commit message from CVS:
* check/gst/gstminiobject.c: (thread_ref), (GST_START_TEST),
(gst_mini_object_suite):
don't use check calls from threads; check probably isn't
threadsafe and using a lock to make it threadsafe would
defeat the purpose of this check
* gst/check/gstcheck.c:
* gst/check/gstcheck.h:
use GST_DEBUG some more
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Added test for scaling.
* gst/gstclock.h:
Small doc fix.
* gst/gstutils.c: (gst_util_uint64_scale_int):
Implemented high precision scaling code.
Original commit message from CVS:
2005-11-23 Andy Wingo <wingo@pobox.com>
* check/net/gstnetclientclock.c (test_functioning): Adjust to
rate_num/rate_denom change.
* gst/net/gstnetclientclock.c
(gst_net_client_clock_observe_times): Take the SLAVE_LOCK not the
OBJECT_LOCK. Don't call add_observation with the lock.
* gst/gstclock.c (gst_clock_init): Initialize the rate as a
fraction.
(gst_clock_adjust_unlocked): Adjust using uint64_scale and the
rate fraction.
(gst_clock_set_calibration, gst_clock_get_calibration): Change to
deal with rate as a fraction whose numerator and denominator are
GstClockTime values.
(gst_clock_set_master): Only use the OBJECT_LOCK to set the
master; the other fields are protected by the SLAVE_LOCK.
(do_linear_regression): Note that this must be called with the
SLAVE_LOCK.
(gst_clock_add_observation): Take the SLAVE_LOCK, not the
OBJECT_LOCK. Call set_calibration instead of touching the
variables directly.
(gst_clock_set_property, gst_clock_get_property): Protect
master/slave parameters with the SLAVE_LOCK.
* gst/gstclock.h (GstClock): Remove rate, add rate_numerator and
rate_denominator. PR3C1S3. Add a new lock, the SLAVE_LOCK, and
note that all of the instance variables that add_observation and
the set_master functions use are protected by that lock and not
the OBJECT_LOCK.
(GST_CLOCK_SLAVE_LOCK, GST_CLOCK_SLAVE_UNLOCK): New macros.
* gst/gstclock.c (gst_clock_add_observation): No longer requires
the caller to take the object lock.
Original commit message from CVS:
* check/gst/gststructure.c: (GST_START_TEST):
* gst/gststructure.c: (gst_structure_parse_value):
Oops, broke automatic string type parsing.
Add a test to catch it in future.
Original commit message from CVS:
* check/gst/capslist.h:
Comment test cases
* check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Test automatic value type detection in gst_structure_from_string.
* gst/gststructure.c: (gst_structure_parse_value):
Add fraction as a type we try and guess automatically in
caps/structure strings.
Original commit message from CVS:
* check/gst/gstcaps.c: (GST_START_TEST):
Extend caps string tests to check that a caps to string
conversion is reversible and produces the same caps.
* gst/gststructure.c: (gst_structure_value_get_generic_type):
Output "fraction" as the generic type fraction range, so caps
serialisation and deserialisation works.
* check/gst/capslist.h:
* gst/gstvalue.c: (gst_value_deserialize_fraction):
Support 'MIN' and 'MAX' for deserialising fractions.
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
* check/gst/gstevent.c: (test_event), (GST_START_TEST):
Block the fakesrc srcpad when we send an event, to avoid
contention on the stream_lock causing random test failures.
Original commit message from CVS:
* check/gst/capslist.h:
* check/gst/gstcaps.c: (GST_START_TEST):
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
* gst/gststructure.c: (gst_structure_parse_range),
(gst_structure_fixate_field_nearest_fraction):
* gst/gststructure.h:
* gst/gstvalue.c: (gst_value_init_fraction_range),
(gst_value_free_fraction_range), (gst_value_copy_fraction_range),
(gst_value_collect_fraction_range),
(gst_value_lcopy_fraction_range), (gst_value_set_fraction_range),
(gst_value_set_fraction_range_full),
(gst_value_get_fraction_range_min),
(gst_value_get_fraction_range_max),
(gst_value_serialize_fraction_range),
(gst_value_transform_fraction_range_string),
(gst_value_compare_fraction_range),
(gst_value_deserialize_fraction_range),
(gst_value_intersect_fraction_fraction_range),
(gst_value_intersect_fraction_range_fraction_range),
(gst_value_subtract_fraction_fraction_range),
(gst_value_subtract_fraction_range_fraction),
(gst_value_subtract_fraction_range_fraction_range),
(gst_value_collect_fraction), (gst_value_fraction_multiply),
(gst_value_fraction_subtract), (gst_value_deserialize_fraction),
(gst_value_transform_string_fraction), (_gst_value_initialize):
* gst/gstvalue.h:
Implement fraction ranges and extend GstFraction to support
arithmetic subtraction, as well as deserialization from integer
strings such as "100"
Add a testsuite as for int and double range set operations
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (GST_EVENT_FILLER): Removed. Can be added back
during the stable series if we need it. Fixes#319178.
* gst/gstevent.c (gst_event_new_filler): Removed.
* check/gst/gstevent.c: Update comment about filler events.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (GstEventTypeFlags): New data type, the flags of
the event type (upstream, downstream, serialized). Renamed
GST_EVDIR_* and GST_EVSER to GST_EVENT_TYPE_*.
(GstEventType): Use GstEventTypeFlags. Rename CUSTOM_UP to
CUSTOM_UPSTREAM, CUSTOM_DS to CUSTOM_DOWNSTREAM, etc.
* gst/gstevent.c: Update for new CUSTOM event names.
* check/gst/gstevent.c: Update check for new CUSTOM event names.
* gst/gstevent.h:
* gst/gstevent.c (gst_event_type_get_flags): New function. Fixes
bug #319392.
Original commit message from CVS:
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add a deserialisation test for fractions
* examples/metadata/read-metadata.c: (message_loop),
(make_pipeline), (main):
Fix up metadata reading sample.
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Debug format fix
* gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Don't try and fixate empty caps
* gst/gst_private.h:
Wrap in G_BEGIN_DECLS/G_END_DECLS
* gst/gstvalue.c: (gst_value_collect_fraction),
(gst_value_set_fraction), (gst_value_get_fraction_denominator),
(gst_value_transform_string_fraction),
(gst_value_compare_fraction):
Add some extra guards to ensure that we don't end up
with an invalid denominator of 0 in a gstfraction and
that fractions always get reduced.
Original commit message from CVS:
2005-11-19 Andy Wingo <wingo@pobox.com>
* check/gst/gstvalue.c (test_string): Add test for bug #165650.
* gst/gstvalue.c (gst_string_wrap): Trying to serialize a NULL
string should produce an error, given the lack of a way to
represent NULL strings. Fixes#165650.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c: Turn off debugging.
* check/net/gstnetclientclock.c (test_functioning): Assert that the
times connverge somewhat. Can't make a real test.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (do_linear_regression): Use all
integer arithmetic. Return the minimum of the domain, which can be
set as "internal" for gst_clock_set_calibration.
(gst_net_client_clock_observe_times): Call _set_calibration.
(gst_net_client_clock_new): Call _set_calibration instead of
rate_offset.
* check/net/gstnetclientclock.c (test_functioning): Use the right
adjustment api.
* gst/gstclock.h:
* gst/gstclock.c (gst_clock_get_calibration)
(gst_clock_set_calibration): New functions, obsolete the ones I
added yesterday. Doh. Precision issues mean we have to extrapolate
from a point in the more recent past than 1970.
(gst_clock_get_rate_offset, gst_clock_set_rate_offset): Mark as
obsolete.
(gst_clock_adjust_unlocked): Use the right calibration data.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_thread):
Whoops, check the right fd. Also add some debugging.
(gst_net_client_clock_observe_times): Adjust for int64 offset.
(do_linear_regression): Add a crapload of debugging. Subtract off
the minimum values from the input series to discard unneeded bits.
Use only int arithmetic. There is still double arithmetic when
calculating the intercept that needs fixing. Return boolean to
indicate success; FALSE would mean the domain or range is too
great. Still needs fixes.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_class_init):
Port goes all the way to MAXUINT16.
* gst/net/gstnettimeprovider.c: Make the port range the same as
for the kernel: 0 assigns, otherwise ports are less than
MAXUINT16.
* check/net/gstnettimeprovider.c: Adapt for 0 == kernel assigns
port change.
* check/net/gstnetclientclock.c (test_functioning): Add the start
of another test.
Original commit message from CVS:
2005-11-17 Andy Wingo <wingo@pobox.com>
* check/Makefile.am (check_PROGRAMS):
* check/net/gstnetclientclock.c: Add a most minimal test for the
net client clock. More to come later.
* gst/net/gstnet.h:
* gst/net/Makefile.am: Add netclientclock.
* gst/net/gstnetclientclock.h:
* gst/net/gstnetclientclock.c: New files, implement an untested
GstClock that takes its time from a network time provider.
Implements the algorithm in network-clock.scm.
* tests/network-clock.scm (*window-size*): Rename from
*queue-length*.
* tests/network-clock.scm (network-time):
* tests/network-clock-utils.scm (q-push): Update callers.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* check/net/gstnettimeprovider.c: Check to see that the time
provider actually provides times. Works, yo!
Original commit message from CVS:
* check/Makefile.am:
Enable more tests.
* check/elements/fakesrc.c: (GST_START_TEST):
Set element to NULL before disposing it.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* gst/net/Makefile.am:
* gst/net/gstnet.h:
* gst/net/gstnettimeprovider.c:
* gst/net/gstnettimeprovider.h: Use the timepacket stuff in the
provider, include it from gstnet.h, and add it to the build.
* gst/net/gstnettimepacket.h:
* gst/net/gstnettimepacket.c: New files, abstracts out the packet
sending and receiving.
Original commit message from CVS:
* check/Makefile.am:
Enable valgrind check that should work fine now.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Fix memleaks in pad allocation.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* gst/net/Makefile.am:
* gst/net/gstnet.h: New part of core to hold network elements and
objects. Put in core because it exposes API that applications want
to use. The library is named libgstnet-tempname right now because
of the existing libgstnet in gst-plugins-base. Solution is
probably to rename the one in plugins-base; will file a bug for
the freeze break.
* gst/net/gstnettimeprovider.c:
* gst/net/gstnettimeprovider.h: New object to export a GstClock's
get_time call over the network.
* configure.ac:
* gst/Makefile.am (lib_LTLIBRARIES): Add gstnet to the build.
* check/Makefile.am:
* check/net/gstnettimeprovider.c: A most minimal test suite. Will
get additions shortly.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_set_base_time): Add debugging.
* gst/gstpipeline.c (gst_pipeline_set_new_stream_time): Document
using GST_CLOCK_TIME_NONE to disable base time management.
(do_pipeline_seek, gst_pipeline_change_state): Don't reset stream
time if it was NONE before.
(gst_pipeline_change_state): Only munge the base time if
stream_time != GST_CLOCK_TIME_NONE.
* check/gst/gstpipeline.c (test_base_time): Punt around the
problem of the probe not being called, because that's not the
issue I'm looking at. Add a check that setting stream_time to NONE
disables base time management.
