Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_get_upstream_size),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data):
Don't try to read beyond the end of the file just because
the header claims a bigger size (like with truncated files).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_add_src_pad),
(gst_wavparse_stream_data), (gst_wavparse_loop):
* gst/wavparse/gstwavparse.h:
Delay source pad creation until we have the first chunk of
media data, so the we can examine the data and adjust the
caps accordingly if required. This makes playback of .wav
files with DTS-declared-as-PCM content work (#313266).
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek):
Fix block alignment calculation. Alignment should be done before
adding the byte offset where the data starts (#335231).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_change_state):
Implement seek in READY (re-fixes #327658)
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event),
(gst_wavparse_sink_activate), (gst_wavparse_sink_activate_pull):
Use DEBUG_OBJECT more.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Pass extra_data to gst_riff_create_audio_caps(), so that
WAVEFORMATEX stuff works. Post audio codec name and post
it as taglist on the bus. Allow up to 8 channesl for raw
PCM in the source pad template caps.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_pad_convert):
Fix conversion from TIME to BYTES format (fixes#326864;
patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>)
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_reset),
(gst_avi_demux_handle_src_event), (gst_avi_demux_parse_stream),
(gst_avi_demux_parse_odml), (gst_avi_demux_peek_tag),
(gst_avi_demux_next_data_buffer), (gst_avi_demux_stream_scan),
(gst_avi_demux_stream_header), (gst_avi_demux_loop):
Construct index for indexless files.
Make sure pad/buffers are correctly reset to NULL once we don't need
them anymore, else we get lovely segfaults/assertions.
* gst/wavparse/gstwavparse.c:
Yes, you can have 96KHz audio and wma in wav :(
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_other), (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_loop), (gst_wavparse_pad_convert),
(gst_wavparse_srcpad_event), (gst_wavparse_sink_activate_pull):
* gst/wavparse/gstwavparse.h:
Use GstSegment to implement more seeking features.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_create_sourcepad), (gst_wavparse_sink_activate):
Use GST_DEBUG_FUNCPTR; add debug message in pad activate function.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_handle_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event):
Set stream time correctly in newsegment.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_handle_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event):
Fix for segment-start/stop API change.
Original commit message from CVS:
* ext/mad/Makefile.am:
* gst/avi/Makefile.am:
* gst/effectv/Makefile.am:
* gst/udp/Makefile.am:
* gst/wavparse/Makefile.am:
Use -lgstfoo-@GST_MAJORMINOR@ instead of -lgstfoo-0.9
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Add some fixes from 0.8 branch: allow 24/32bps songs and
blockalign samples to the header-specified size, if any
(#311070); error out on channels==0 or bitrate==0
(#309043, #304588).
Original commit message from CVS:
* configure.ac:
* gst/wavparse/gstwavparse.c:
* gst/wavparse/gstwavparse.h:
* gst/wavparse/Makefile.am:
Ported wavparse to 0.9 . Playing, seeking and state changes work.
Could need more loving on the headers though.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_audio_caps_with_data):
Do actually fix invalid RIFF fmt header values for alaw
and mulaw audio instead of just saying so.
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Give gst_riff_create_audio_caps_with_data() a chance to
fix up broken format header fields before extracting any
parameters from the header. (fixes#167633)
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_push),
(gst_a52dec_handle_event), (gst_a52dec_chain):
Add some debug output. Check that a discont has a valid
time associated.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop):
Ignore TAG events. A little extra debug for broken timestamps.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_init), (dvdnavsrc_loop),
(dvdnavsrc_change_state):
Ensure we send a discont to engage the link before we send any
other events.
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_init),
(dvdreadsrc_finalize), (_close), (_open), (_seek_title),
(_seek_chapter), (seek_sector), (dvdreadsrc_get),
(dvdreadsrc_uri_get_uri), (dvdreadsrc_uri_set_uri):
Handle URI of the form dvd://title[,chapter[,angle]]. Currently only
dvd://title works in totem because typefinding sends a seek that ends
up going back to chapter 1 regardless.
* ext/mpeg2dec/gstmpeg2dec.c:
* ext/mpeg2dec/gstmpeg2dec.h:
Output correct timestamps and handle disconts.
* ext/ogg/gstoggdemux.c: (get_relative):
Small guard against a null dereference.
* ext/pango/gsttextoverlay.c: (gst_textoverlay_finalize),
(gst_textoverlay_set_property):
Free memory when done. Don't call gst_event_filler_get_duration on
EOS events. Use GST_LOG and GST_WARNING instead of g_message and
g_warning.
* ext/smoothwave/gstsmoothwave.c: (gst_smoothwave_init),
(draw_line), (gst_smoothwave_dispose), (gst_sw_sinklink),
(gst_sw_srclink), (gst_smoothwave_chain):
Draw solid lines, prettier colours.
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_init):
Add a default palette that'll work for some movies.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_init),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_send_discont),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset):
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_discont),
(gst_mpeg_demux_parse_syshead), (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead):
* gst/mpegstream/gstmpegparse.h:
Use PTM/NAV events when for timestamp adjustment when connected to
dvdnavsrc. Don't use many discont events where one suffices.
* gst/playback/gstplaybasebin.c: (group_destroy),
(gen_preroll_element), (gst_play_base_bin_add_element):
* gst/playback/gstplaybasebin.h:
Make sure we remove subtitles from the same bin we put them in.
* gst/subparse/gstsubparse.c: (convert_encoding), (parse_subrip),
(gst_subparse_buffer_format_autodetect),
(gst_subparse_change_state):
Fix some memleaks and invalid accesses.
* gst/typefind/gsttypefindfunctions.c: (ogganx_type_find),
(oggskel_type_find), (cmml_type_find), (plugin_init):
Some typefind functions for Annodex v3.0 files
* gst/wavparse/gstwavparse.h:
GstRiffReadClass is the correct parent class.
Original commit message from CVS:
Reviewd by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Fix memleak (#155223).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
add ATRAC3 to STATIC CAPS to fix a warning
* gst/matroska/ebml-read.c:
* gst-libs/gst/riff/riff-read.c:
fix typos
Original commit message from CVS:
* gst/wavparse/Makefile.am
* gst/wavparse/riff.h
* gst/wavparse/wavparse.vcproj
riff.h removal (unused and duplication with riff-ids.h)
Original commit message from CVS:
gstwavparse.c: it did not build in system with Glib < 2.4 because it
used the macro G_MAXUINT32. Now we define the macro if it is not yet
defined.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_class_init),
(gst_wavparse_stream_init), (gst_wavparse_fmt),
(gst_wavparse_other), (gst_wavparse_loop),
(gst_wavparse_pad_convert), (gst_wavparse_pad_query),
(gst_wavparse_srcpad_event):
* gst/wavparse/gstwavparse.h:
Added some more debugging info.
Fix the case where the length of the file is 0.
Make sure we seek to sample borders.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Throw error if we didn't recognize the stream. Fixes#152289.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Fix memleak.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt),
(gst_wavparse_handle_seek), (gst_wavparse_srcpad_event):
Add the pad to the element after setting up the caps. This
makes it a lot easier to autoplug.
