Original commit message from CVS:
* gst/audiofx/audioamplify.c: (gst_audio_amplify_transform_ip):
* gst/audiofx/audiodynamic.c: (gst_audio_dynamic_transform_ip):
* gst/audiofx/audioinvert.c: (gst_audio_invert_transform_ip):
Sync the GObject properties before each processing step to properly
work with the controller.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audiodynamic.c:
(gst_audio_dynamic_characteristics_get_type),
(gst_audio_dynamic_mode_get_type),
(gst_audio_dynamic_set_process_function),
(gst_audio_dynamic_base_init), (gst_audio_dynamic_class_init),
(gst_audio_dynamic_init), (gst_audio_dynamic_set_property),
(gst_audio_dynamic_get_property), (gst_audio_dynamic_setup),
(gst_audio_dynamic_transform_hard_knee_compressor_int),
(gst_audio_dynamic_transform_hard_knee_compressor_float),
(gst_audio_dynamic_transform_soft_knee_compressor_int),
(gst_audio_dynamic_transform_soft_knee_compressor_float),
(gst_audio_dynamic_transform_hard_knee_expander_int),
(gst_audio_dynamic_transform_hard_knee_expander_float),
(gst_audio_dynamic_transform_soft_knee_expander_int),
(gst_audio_dynamic_transform_soft_knee_expander_float),
(gst_audio_dynamic_transform_ip):
* gst/audiofx/audiodynamic.h:
* gst/audiofx/audiofx.c: (plugin_init):
Add new audiodynamic element which can act as a compressor or
expander. Supported are hard-knee and soft-knee operation modes with
user-specified ratio and threshold.
Attack and release parameters are not yet implemented but will follow.
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Integrate audiodynamic into the docs.
* tests/check/Makefile.am:
* tests/check/elements/audiodynamic.c: (setup_dynamic),
(cleanup_dynamic), (GST_START_TEST), (dynamic_suite), (main):
Add unit test for audiodynamic.
Original commit message from CVS:
* gst/audiofx/audioamplify.c: (gst_audio_amplify_base_init),
(gst_audio_amplify_class_init), (gst_audio_amplify_init),
(gst_audio_amplify_set_process_function),
(gst_audio_amplify_setup):
* gst/audiofx/audioamplify.h:
* gst/audiofx/audioinvert.c: (gst_audio_invert_base_init),
(gst_audio_invert_class_init), (gst_audio_invert_setup):
* gst/audiofx/audioinvert.h:
Some small cleanups and port both elements to the new GstAudioFilter
base class to save a few lines of common code.
* gst/audiofx/Makefile.am:
Link against libgstaudio for the above changes
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audioamplify.c:
(gst_audio_amplify_clipping_method_get_type),
(gst_audio_amplify_base_init), (gst_audio_amplify_class_init),
(gst_audio_amplify_init), (gst_audio_amplify_set_process_function),
(gst_audio_amplify_set_property), (gst_audio_amplify_get_property),
(gst_audio_amplify_set_caps),
(gst_audio_amplify_transform_int_clip),
(gst_audio_amplify_transform_int_wrap_negative),
(gst_audio_amplify_transform_int_wrap_positive),
(gst_audio_amplify_transform_float_clip),
(gst_audio_amplify_transform_float_wrap_negative),
(gst_audio_amplify_transform_float_wrap_positive),
(gst_audio_amplify_transform_ip):
* gst/audiofx/audioamplify.h:
* gst/audiofx/audiofx.c: (plugin_init):
Add new element "audioamplify". This allows scaling of raw audio
samples, similar to the "volume" element, but provides different modes
for clipping and allows unlimited amplification. It's mainly targeted
for creative sound design and not as a replacement of the "volume"
element. Fixes#397162
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Add docs for audioamplify and integrate them into the build system
* tests/check/Makefile.am:
* tests/check/elements/audioamplify.c: (setup_amplify),
(cleanup_amplify), (GST_START_TEST), (amplify_suite), (main):
Add fairly extensive unit test suite for audioamplify
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofx.c: (plugin_init):
* gst/audiofx/audioinvert.c: (gst_audio_invert_base_init),
(gst_audio_invert_class_init), (gst_audio_invert_init),
(gst_audio_invert_set_property), (gst_audio_invert_get_property),
(gst_audio_invert_set_caps), (gst_audio_invert_transform_int),
(gst_audio_invert_transform_float),
(gst_audio_invert_transform_ip):
* gst/audiofx/audioinvert.h:
Add new audiofx element "audioinvert". This element swaps the upper
and lower half of samples and can be used for example for a
wide-stereo effect. Fixes#396057
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Add docs for the audioinvert element and add them to the build system.
* tests/check/Makefile.am:
* tests/check/elements/audioinvert.c: (setup_invert),
(cleanup_invert), (GST_START_TEST), (invert_suite), (main):
Add unit test suite for the audioinvert element.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo circular-chaos org>
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_class_init),
(gst_audio_panorama_set_process_function):
Use a function array for process methods, add more docs and define the
startindex of enums.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo ubuntu com>
* docs/plugins/Makefile.am:
* gst/audiofx/audiopanorama.c:
Some small docs fixes (#394851).
Original commit message from CVS:
Patch by: Sebastian Dröge <mail at slomosnail de >
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_init),
(gst_audio_panorama_set_caps), (gst_audio_panorama_transform):
* gst/audiofx/audiopanorama.h:
Fix audiopanorame with float samples. Fixes#383726.
Original commit message from CVS:
* gst/audiofxgood/audiopanorama.c: (gst_audio_panorama_class_init),
(gst_audio_panorama_set_property),
(gst_audio_panorama_get_property),
(gst_audio_panorama_transform_m2s_int),
(gst_audio_panorama_transform_s2s_int),
(gst_audio_panorama_transform_m2s_float),
(gst_audio_panorama_transform_s2s_float):
* gst/audiofxgood/audiopanorama.h:
* tests/check/elements/audiopanorama.c: (GST_START_TEST):
Make also the pan-property float (saves scaling and yields better
resolution)
Original commit message from CVS:
* gst/audiofxgood/audiopanorama.c: (gst_audio_panorama_set_caps),
(gst_audio_panorama_transform_m2s_float),
(gst_audio_panorama_transform_s2s_float):
ChangeLog surgery to add cymax's real name
Original commit message from CVS:
* gst/audiofxgood/audiopanorama.c:
(gst_audio_panorama_transform_m2s):
Fix docs & debug category. Add Fixme for volume pan levels.
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
another batch of connect->link fixes
please let me know about issues
and please refrain of making them yourself, so that I don't spend double
the time resolving conflicts
