gst_rtsp_connection_connect_with_response accepts a response pointer
which it fills with the response from setup_tunneling if the
connection is configured to be tunneled. The motivation for this is to
allow the caller to inspect the response header to determine if
additional authentication is required so that the connection can be
retried with the appropriate authentication headers.
The function prototype of gst_rtsp_connection_connect has been
preserved for compatability with existing code and wraps
gst_rtsp_connection_connect_with_response.
https://bugzilla.gnome.org/show_bug.cgi?id=749596
Two new functions have been added,
gst_rtsp_connection_set_tls_database() and
gst_rtsp_connection_get_tls_database(). The certificate database will be
used when a certificate can't be verified with the default database.
https://bugzilla.gnome.org/show_bug.cgi?id=724393
Added new functions gst_rtsp_connection_set_tls_validation_flags() to
allow setting the TLS certificate validation flags when establishing a
TLS connection.
A getter is also available, gst_rtsp_connection_get_tls_validation_flags().
https://bugzilla.gnome.org/show_bug.cgi?id=711231
This is necessary to allow having more than one session in the same connection.
API: gst_rtsp_connection_set_remember_session_id()
API: gst_rtsp_connection_get_remember_session_id()
Add a limit to the amount of queued bytes or messages we allow on the watch.
API: GstRTSPConnection::gst_rtsp_watch_set_send_backlog()
API: GstRTSPConnection::gst_rtsp_watch_get_send_backlog()
Catch more socket errors.
Rework how sockets are managed in the GSource, wake up the maincontext instead
of adding/removing the sockets from the source.
Add callback for when the tunnel connection is lost. Some clients (Quicktime
Player) close the POST connection in tunneled mode and reopen the socket when
needed.
See #612915
The new API to send messages using GstRTSPWatch will first try to send the
message immediately. Then, if that failed (or the message was not sent
fully), it will queue the remaining message for later delivery. This avoids
unnecessary context switches, and makes it possible to keep track of
whether the connection is blocked (the unblocking of the connection is
indicated by the reception of the message_sent signal).
This also deprecates the old API (gst_rtsp_watch_queue_data() and
gst_rtsp_watch_queue_message().)
API: gst_rtsp_watch_write_data()
API: gst_rtsp_watch_send_message()
With gst_rtsp_connection_set_http_mode() it is possible to tell the
connection whether to allow HTTP messages to be supported. By enabling HTTP
support the automatic HTTP tunnel support will also be disabled.
API: gst_rtsp_connection_set_http_mode()
The error_full callback is similar to the error callback, but allows for
better error handling. For read errors a partial message is provided to
help an RTSP server generate a more correct error response, and for write
errors the write queue id of the failed message is returned.
gst_rtsp_watch_queue_data() is similar to gst_rtsp_watch_queue_message()
but allows for queuing any data block for writing (much like
gst_rtsp_connection_write() vs. gst_rtsp_connection_send().)
API: gst_rtsp_watch_queue_data()
Previously the messages_sent() callback was only called for messages
which had a CSeq, which excluded all data messages. Instead of using the
CSeq as ID, use a simple index counter.
Save the tunnelid in the connection. Add a method to retrieve the tunnelid so
that a server can store and match the id against other tunnel requests.
Fix the URI in the tunnel requests so that they contain the absolute uri and the
query string if any instead of just the hostname.
Transparently base64 decode the input stream when tunneling.
Add method to set the connection ip address so that it can be included in the
tunnel response.
Add method to connect the two tunnel requests.
Add two callbacks for the async mode to notify a tunnel start and tunnel
complete event.
Add method to reset the watch after the connection has been tunneled.
Various little refactoring to make more stuff reusable.
API: RTSP::gst_rtsp_connection_set_ip()
API: RTSP::gst_rtsp_connection_get_tunnelid()
API: RTSP::gst_rtsp_connection_do_tunnel()
API: RTSP::gst_rtsp_watch_reset()
Add support for tunneling RTSP over HTTP.
Fix documentation some more.
See also #573173.
API: RTSP:gst_rtsp_connection_is_tunneled()
API: RTSP:gst_rtsp_connection_set_tunneled()
Add gst_rtsp_connection_get_url() method.
Reserve space for 2 sockets, one for reading and one for writing. Use socket
pointers to select the read and write sockets. This should allow us to implement
tunneling over HTTP soon.
API: RTSP::gst_rtsp_connection_get_url()
Make the RTSPConnection object opaque so that we can extend it in the future.
Rename GstRTSPChannel to GstRTSPWatch to avoid confusing with the RTSP channels.
Add a GstRTSPChannel object that wraps a GSource around the RTSP connection so
that the connection can be monitored from a maincontext. This allows us to
operate in ASYNC mode, which is handy when building a server.
Rework the old code to use the async code under the hood.
API: gst_rtsp_channel_new()
API: gst_rtsp_channel_unref()
API: gst_rtsp_channel_attach()
API: gst_rtsp_channel_queue_message()
Original commit message from CVS:
* gst-libs/gst/rtsp/gstrtspconnection.c:
(gst_rtsp_connection_set_auth), (gst_rtsp_connection_set_auth_param),
(gst_rtsp_connection_clear_auth_params),
(gst_rtsp_connection_set_qos_dscp), (gst_rtsp_connection_get_ip):
* gst-libs/gst/rtsp/gstrtspconnection.h:
Add a couple of missing argument guards.
Add a way of setting the DSCP for an RTSP connection.
Add an accessor method for the ip member of GstRTSPConnection as all
members are supposed to be private.
Original commit message from CVS:
Patch by: Wouter Cloetens <zombie at e2big dot org>
* gst-libs/gst/rtsp/Makefile.am:
* gst-libs/gst/rtsp/gstrtspconnection.c:
(gst_rtsp_connection_create), (md5_digest_to_hex_string),
(auth_digest_compute_hex_urp), (auth_digest_compute_response),
(add_auth_header), (gst_rtsp_connection_free),
(gst_rtsp_connection_set_auth), (str_case_hash), (str_case_equal),
(gst_rtsp_connection_set_auth_param),
(gst_rtsp_connection_clear_auth_params):
* gst-libs/gst/rtsp/gstrtspconnection.h:
Add Digest authorization support for RTSP connections. See #532065.
* gst-libs/gst/rtsp/md5.c:
* gst-libs/gst/rtsp/md5.h:
Yeap, another md5 implementation until we can depend on a glib that has
support for it.
Original commit message from CVS:
* gst-libs/gst/rtsp/gstrtspconnection.c:
(gst_rtsp_connection_create), (gst_rtsp_connection_connect),
(gst_rtsp_connection_write), (gst_rtsp_connection_read_internal),
(gst_rtsp_connection_receive), (gst_rtsp_connection_close),
(gst_rtsp_connection_free), (gst_rtsp_connection_poll),
(gst_rtsp_connection_flush):
* gst-libs/gst/rtsp/gstrtspconnection.h:
Use GstPoll for the rtsp connection.
Original commit message from CVS:
* gst-libs/gst/rtsp/gstrtspconnection.c:
(gst_rtsp_connection_connect), (gst_rtsp_connection_write),
(gst_rtsp_connection_read), (gst_rtsp_connection_poll):
* gst-libs/gst/rtsp/gstrtspconnection.h:
Small cleanups.
On shutdown, don't read the control socket yet.
Set timeout value correctly in all cases.
Add function to check if the server accepts reads or writes.
API: gst_rtsp_connection_poll()
* gst-libs/gst/rtsp/gstrtspdefs.h:
Fix compilation with -pedantic.
Add enum for _poll.
