Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_chain_parse_tag),
(gst_tag_demux_chain):
* gst/id3demux/gstid3demux.c: (gst_id3demux_chain):
In streaming mode, if the first buffer we get doesn't have an
offset, fix it up to be 0, otherwise trimming won't work later on
and we'll be typefinding application/x-id3, which may result in
decodebin plugging an endless number of id3demux elements as a
consequence. Fixes#385031.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_add_srcpad):
* gst/icydemux/gsticydemux.c: (gst_icydemux_add_srcpad):
* gst/id3demux/gstid3demux.c: (gst_id3demux_add_srcpad):
Activate pad before adding it to the already-running element.
* tests/check/elements/icydemux.c: (icydemux_found_pad):
Activate newly-created pad too.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_chain_parse_tag):
* gst/id3demux/gstid3demux.c: (gst_id3demux_chain):
Don't interpret a first buffer with an offset of NONE as
'from the middle of the stream', but only a first buffer
that has a valid buffer offset that's non-zero (see #345449).
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (plugin_init):
* gst/id3demux/id3tags.c:
(id3demux_add_id3v2_frame_blob_to_taglist):
* gst/id3demux/id3tags.h:
On second thought, it might be wiser and more efficient
not to do tag registration from a streaming thread.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_trim_buffer),
(gst_tag_demux_read_range):
* gst/id3demux/gstid3demux.c: (gst_id3demux_trim_buffer),
(gst_id3demux_read_range):
Don't return FLOW_UNEXPECTED when a buffer is before
the start of the stream (which might happen with
large ID3v2 tags if the tag reading was done pullrange
based and we then switched to push mode later on).
Fixes regression introduced by commit from June 29th.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_chain):
* gst/id3demux/gstid3demux.c: (gst_id3demux_chain):
Return FLOW_UNEXPECTED when at the end of the file, not
FLOW_ERROR. Fixes 'internal stream error' errors that
would sometimes occur in totem when scrubbing to the
end of an ID3v1 tagged mp3 file.
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (gst_id3demux_trim_buffer),
(gst_id3demux_read_range):
Make sure we don't return GST_FLOW_OK with a NULL buffer in
certain cases where a read beyond the end of the file is
requested. Fixes#345930.
* gst/apetag/gsttagdemux.c: (gst_tag_demux_trim_buffer),
(gst_tag_demux_read_range):
Fix same issue here as well.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_get_upstream_size):
* gst/id3demux/gstid3demux.c: (id3demux_get_upstream_size):
Use gst_pad_query_peer_duration() utility function here.
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (gst_id3demux_chain),
(gst_id3demux_sink_activate):
Let core insert default error message for TYPE_NOT_FOUND
errors, it's just as good as our own and has the added
bonus of being translated.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_init),
(gst_tag_demux_sink_event):
* gst/id3demux/gstid3demux.c: (gst_id3demux_init),
(gst_id3demux_sink_event):
Post an error message when we get an EOS event and were not
able to find out the type of stream.
* tests/check/elements/id3v2mux.c: (fill_mp3_buffer), (got_buffer),
(test_taglib_id3mux_with_tags):
Decrease num-buffers to 16 per iteration again, otherwise the
many memcpy()s and reallocations in the test will hammer slow
CPUs completely and make the test timeout.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_chain):
* gst/id3demux/gstid3demux.c: (gst_id3demux_chain):
Don't attempt typefinding on too-short buffers that have been
completely trimmed away.
* gst/id3demux/id3tags.c: (id3demux_read_id3v2_tag):
Improve the debug output
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_chain):
Ensure that we set caps on the buffers we pass.
* gst/id3demux/gstid3demux.c: (gst_id3demux_chain),
(gst_id3demux_sink_activate):
Ensure that we set caps on the buffers we pass.
Use STREAM, TYPE_NOT_FOUND as the error class when
typefinding fails.
Original commit message from CVS:
* configure.ac:
Bump -base requirement to 0.10.5 for gst_tag_from_id3_user_tag(),
used by id3demux.
* gst/id3demux/gstid3demux.c: (plugin_init):
* gst/id3demux/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_user_text_identification_frame),
(parse_unique_file_identifier):
Add support for UFID and TXXX frames and extract musicbrainz tags.
Original commit message from CVS:
* gst/id3demux/Makefile.am:
* gst/id3demux/gstid3demux.c: (gst_id3demux_add_srcpad),
(gst_id3demux_chain), (gst_id3demux_sink_activate):
Use new typefind helper functions here as well, and
do typefinding in pull-mode if upstream supports that.
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (id3demux_get_upstream_size),
(gst_id3demux_do_typefind):
Fix a couple of mem leaks. (Patch by Jonathan Matthew
<jonathan at kaolin dot wh9 dot net>)
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (gst_id3demux_chain),
(gst_id3demux_read_id3v1), (gst_id3demux_sink_activate),
(gst_id3demux_send_tag_event):
* gst/id3demux/id3tags.c: (id3demux_read_id3v1_tag):
Someone should kick my butt. Remove ID3v1 tags from the end of the
file.
Improve error messages. Send the TAG message as soon as we complete
typefinding, instead of waiting until we send the first buffer.
Downstream tag event is still sent before the first buffer.
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (gst_id3demux_remove_srcpad):
Don't put function calls in g_return_if_fail() statements,
or they'll be replaced with NOOPs if someone compiles with
G_DISABLE_CHECKS defined.
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (gst_id3demux_add_srcpad):
Add gst_element_no_more_pads() for proper decodebin behaviour.
* gst/id3demux/id3v2frames.c: (parse_comment_frame),
(parse_text_identification_frame), (parse_split_strings):
Failure to decode some tags is not a GST_ERROR() but a
GST_WARNING()
When iterating over a chunk of text, check that we haven't gone too
far.
Original commit message from CVS:
2005-12-21 Jan Schmidt <thaytan@mad.scientist.com>
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* gst/id3demux/gstid3demux.c: (gst_id3demux_get_type),
(gst_id3demux_base_init), (gst_id3demux_class_init),
(gst_id3demux_chain):
* gst/id3demux/gstid3demux.h:
Add documentation for id3demux.
Don't fail if the first buffer is not at offset 0, just
attempt to typefind and do pass through
Rename the gst_type function from gst_gst_id3demux..
