Use atomic ops on pending flags. Rename the segment_pending to
new_segment_pending. Set new_segment_pending not when we received seek, but
when we received the first upstream new_segment.
Send FLUSH_STOP right after forwarding the seek event upstream if necessary.
This makes sure that adder->srcpad is not left flushing if seeking fails or if
upstream is blocked.
The same fix was already applied to videomixer in 49b2a946.
Adder was using always incrementing timestamps. Seeking was done by setting the
position in the newsegment event. This was failing when doing segmented seeks
with rate<0.0, as offset (and thus timestamp) would go below 0.
Now we take both cur and end from the seek event. We construct newsegment events
depending including cur and end from the seek event. We set position to the
start of the segment. Timestamp is set to start or end of segment depending on
rate. Offset is recalculated.
Decrement sample counter when playing backwards. Set proper segment when playing
backwards (0..cur instead or cur..-1). Add more logging and fix a format string.
Detect EOS faster.
Try to reuse one of the input buffer as the output buffer. This usually works
and avoids an allocation and a memcpy.
Be smarter with GAP buffers so that they don't get mixed or cleared at all. Also
try to use a GAP buffer as the output buffer when all input buffers are GAP
buffers.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
Also use the capsfilter if there is no src-peer as the caps constrain what
we can do. Don't create any_caps as a default, as we check for NULL to skip the
filtering. This is a (small) performance regression as we always intersect
otherwise.
Adder can only handle one common format accross the pads. Thus one needed to add
a capsfilter afterwards and manage the caps. Now one can simply set the caps on
the property.
This ensures that collectpads' cookie is properly updated so that when the streaming
threads will restart and be checking for the flushing status of all pads there will
be no inconsistent state.
When a seek failed upstream, make sure the adder sinkpad is set unflushing again
so that streaming can continue.
We only have a pending segment when we flushed.
Set the flush_stop_pending flag inside the appropriate locks and before we
attempt to perform the upstream seek.
Add some more comments.
Use the right lock to protect the flags in flush_stop.
See #585708
At least do the fix to sent the flush_stop when seeking failed to ensure we
keep no pads flushing. before it was send when the seeking worked which is just
plain wrong and was not the intention.
When no flush-stop has been sent by upstream, we have to send one ourselves to
continue playback. Do this as soon as the collect function is called instead of
after we possibly pushed segment events (that got then flushed out)
Adder was relying that something else sends a flush stop. When using adder with
a livesource it was not getting a flush_stop and thus all pads downstream where
keept flushing. Mark a pending flush_stop and send it when we are working on
the new segment back in the streaming thread.
Original commit message from CVS:
* gst/adder/Makefile.am:
* gst/adder/gstadder.c:
Cleanup variable names to make the adder-loop easier to understand.
Also try to use liboil to spee it up, but ifdef it out as it does not
make any change for me (Intel pentim M (sse,sse2) please try on other
systems).
Original commit message from CVS:
* gst/adder/gstadder.c:
Cleanup lots of empty lines that came from gst-indent going havoc
before I added the INDENT_ON/OFF marker some time agao.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration),
(gst_adder_query_latency):
When using gst_element_iterate_pads() one has to unref every pad
after usage.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration):
Correctly resync the iterator if gst_iterator_next() returns
GST_ITERATOR_RESYNC.
Original commit message from CVS:
* gst/adder/gstadder.c:
Adder also doesn't support audio/x-raw-int with width!=depth so don't
claim this on the pad template caps.
Original commit message from CVS:
* gst/adder/gstadder.c:
Adder doesn't support 24 bit samples so don't claim it supports them
in the pad template caps.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps),
(gst_adder_class_init):
Correctly declare the supported endianness on the pad templates
and check for correct endianness in the set caps function. Adder
only supports native endianness.
Also use gst_element_class_set_details_simple().
Original commit message from CVS:
* configure.ac:
Require CVS of core for new API in collectpads.
* gst/adder/gstadder.c:
Use new API to make adder sparse stream aware.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_sink_getcaps),
(gst_adder_request_new_pad):
Make getcaps more robust by not using the proxycaps function. This makes
sure that we don't end up recursively calling getcaps upstream.
See #316248.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps), (gst_adder_src_event),
(gst_adder_sink_event), (gst_adder_collected):
Fix non-flushing segmented seeks, Fixes#340060 for me
Original commit message from CVS:
* gst/adder/gstadder.c: (forward_event_func),
(gst_adder_src_event), (gst_adder_collected),
(gst_adder_change_state):
* gst/adder/gstadder.h:
Remember the start position asked in the incoming seeks, so we can
output GST_EVENT_NEW_SEGMENT with a correct position value (instead
of assuming it will always be 0).
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps),
(gst_adder_query_duration):
Fix leak in duration query.
Reflow some docs and notes.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_get_type):
Make it easier to copy&paste
* gst/volume/Makefile.am:
* gst/volume/gstvolume.c: (volume_update_real_volume),
(gst_volume_set_volume), (gst_volume_set_mute),
(gst_volume_class_init), (volume_process_int16), (volume_set_caps),
(volume_transform_ip), (volume_update_mute),
(volume_update_volume):
* gst/volume/gstvolume.h:
Add own debug category, move duplicate code to helper function, fix
property texts, add more comments and prepare ffor liboil-goodness
* tests/check/Makefile.am:
* tests/check/elements/volume.c: (GST_START_TEST), (volume_suite):
add test for mute and passtrough case, be a bit more verbose to track
failure
* tests/check/generic/states.c: (GST_START_TEST):
catch elements that fail to instantiate
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps),
(gst_adder_query_duration), (gst_adder_query), (forward_event),
(gst_adder_src_event), (gst_adder_sink_event),
(gst_adder_class_init), (gst_adder_finalize),
(gst_adder_request_new_pad), (gst_adder_collected):
* gst/adder/gstadder.h:
Updated some docs. Added comments and FIXMEs all over the place.
Improve debugging info.
Fix leak on finalize by not calling the parent.
Implement duration query.
Make event forwarding threadsafe.
Correctly send NEWSEGMENT at start and after flush.
Handle EOS correctly.
Post error when not negotiated.
* tests/check/elements/adder.c: (GST_START_TEST):
Added FIXME in the test.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_request_new_pad),
(gst_adder_collected):
* gst/adder/gstadder.h:
Remove bogus segment merging and forwarding, we don't
care about timestamps anyway and we just produce a
continuous stream.
Also create a nice NEWSEGMENT event when we start.
Use _scale_int some more.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_sink_event),
(gst_adder_request_new_pad), (gst_adder_change_state):
* gst/adder/gstadder.h:
* tests/check/Makefile.am:
* tests/check/elements/adder.c: (event_loop), (GST_START_TEST),
(adder_suite), (main):
Add sink-event handling to adder. It tries to merge incomming
newsegment-events. Added test to check if segment_done is comming
through.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps), (gst_adder_src_event),
(gst_adder_init):
send events from src-pad to all sink-pads fixes#338657
Original commit message from CVS:
* ext/ogg/gstoggmux.c: (gst_ogg_mux_init):
* gst/adder/gstadder.c: (gst_adder_init):
use DEBUG_FUNCPTR for collectpads
Original commit message from CVS:
* ext/ogg/gstoggmux.c: (gst_ogg_mux_init),
(gst_ogg_mux_request_new_pad), (gst_ogg_mux_queue_pads),
(gst_ogg_mux_clear_collectpads), (gst_ogg_mux_change_state):
* gst/adder/gstadder.c: (gst_adder_init),
(gst_adder_request_new_pad), (gst_adder_collected),
(gst_adder_change_state):
Update for gst_collectpads_foo() to gst_collect_pads_foo()
API change.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query), (gst_adder_collected),
(gst_adder_change_state):
Fix timestamps and fix deadlock when stopping the collectpads.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query), (gst_adder_class_init),
(gst_adder_init), (gst_adder_request_new_pad),
(gst_adder_change_state):
Add query function to source pad, so adder reports the correct
time/sample position when queried (#315457); fix state change
function; use GST_DEBUG_FUNCPTR() for pad functions.
Original commit message from CVS:
* configure.ac:
When testing for X libs, use the X CFlags
* gst/adder/gstadder.c: (gst_adder_change_state):
Stop the collectpads before calling parent state change function
on PAUSED->READY, otherwise we deadlock deactivating pads.
Original commit message from CVS:
* gst/adder/Makefile.am:
* gst/adder/gstadder.c: (gst_adder_setcaps),
(gst_adder_class_init), (gst_adder_init),
(gst_adder_request_new_pad), (gst_adder_collected),
(gst_adder_change_state):
* gst/adder/gstadder.h:
Ported adder as an example of a mixer element using
collect pads. Needs more negotiation work.
Original commit message from CVS:
reviewed by Benjamin Otte <otte@gnome.org>
* gst/adder/gstadder.c: (gst_adder_loop):
properly error out when no negotiation has happened yet. (fixes
#143032)
Original commit message from CVS:
* gst/ac3parse/gstac3parse.c: update to checklist 5
* gst/adder/gstadder.c: rewrite negotiation. update to checklist 5
* gst/audioconvert/gstaudioconvert.c: update to checklist 5
* gst/audioscale/gstaudioscale.c: same
* gst/auparse/gstauparse.c: same
* gst/avi/gstavidemux.c: same
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- all typefind functions are in gst/typefind now
- more typefind functions then before
- some plugins might fail to compile now because I don't have them installed and they
a) require bytestream or
b) haven't had their typefind fixed.
Please fix those plugins and put the typefind functions into gst/typefind if they don't have dependencies
Original commit message from CVS:
New typefind system:
* bytestream is now part of the core
* all plugins have been modified to use this new typefind system
* asf typefinding added
* mpeg video stream typefiding removed because it's broken
* duplicate typefind entries removed
* extra id3 typefinding added, because we've seen 4 types of files
(riff/wav, flac, vorbis, mp3) with id3 headers and each of these needs
to work. Instead, I've added an id3 element and let it redo typefiding
after the id3 header. this needs a hack because spider only typefinds
once. We can remove this hack once spider supports multiple typefinds.
* with all this, mp3 typefinding is semi-rewritten
* id3 typefinding in flac/vorbis is removed, it's no longer needed
* fixed spider and gst-typefind to use this, too.
* Other general cleanups
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
another batch of connect->link fixes
please let me know about issues
and please refrain of making them yourself, so that I don't spend double
the time resolving conflicts
Original commit message from CVS:
various code cleanups
use gst/audio/audio.h more
allow setting fixed set of audio format specs so that adder can work as a
NULL src
adder ! fakesink works, but adder ! osssink not yet, due to some caps nego
that is failing.
Help is appreciated there.
Original commit message from CVS:
* fix to adder: don't pull on unusable pads
* fix to ladspa: get output buffers first, so we can know how many frames to
process
- this breaks inplace buffer stuff, hmm
* fix to float2int: add a bufferpool with the same nframes as the source pad's
pool -> no extra latency
Original commit message from CVS:
* fixups in the prop view/controller
* compilation fixes in the player
* add gst-editor to gst-all
* fixes to adder to comply with new osssink sync issues
* alsa fixes, although still 100% cpu is used, yum
* reenable locking of threaded elements, seems to work fine here
* fix a makefile in examples/plugins
Original commit message from CVS:
* a hack to work around intltool's brokenness
* a current check for mpeg2dec
* details->klass reorganizations
* an element browser that uses details->klass
* separated cdxa parse out from the avi directory
