There is no need to set the latency in the jittebuffer in _init, we will set
that later when going to PAUSED.
Set the jitterbuffer active and not buffering when starting.
When deactivating jitterbuffers when the buffering starts, keep the current
percent of the jitterbuffer and also set the jitterbuffer in the buffering state
so that we know when it's filled again.
Add property to get the buffering percentage of the jitterbuffer.
When we are in buffer mode, adjust the buffering low/high thresholds based on
the total configured latency. If we don't and there is a huge queue or element
with a big latency downstream we might drain the complete queue immediately and
start buffering again.
Return the next timestamp in the jitterbuffer.
Use the min-timestamp of the jitterbuffers to calculate an offset so that the
next timestamp is pushed with a timestamp equal to running_time.
Start producing timestamps from 0 in the buffering case too.
Add signal to pause the jitterbuffer. This will be emitted from gstrtpbin when
one of the jitterbuffers is buffering.
Make rtpbin collect the buffering messages and post a new buffering message with
the min value.
Remove the stats callback from jitterbuffer but pass a percent integer to
functions that affect the buffering state of the jitterbuffer. This allows us
then to post buffering messages from outside of the jitterbuffer lock.
Add callback for buffering stats.
Configure the latency in the jitterbuffer instead of passing it with _insert.
Calculate buffering levels when pushing and popping
Post buffering messages.
Release the jbuf lock before emiting the request-pt-map signal to avoid
deadlocks. We also need to catch the shutdown case when locking again.
Fixes#593354
When we receive a reordered packet with the same timestamp as the previous one
(which can happen for fragmented packets) don't consider the packet as lost but
instead wait for the reordered packet to arrive.
Switch the warning-level, so that a reordering does not get a warning, only
an actual produced lost-packet.
Fixes#594251
The priv->clock_rate variable could become -1 between when its checked to not
be -1 and when its used, causing an assertion. Fixed by taking the mutex
earlier in the chain() function.
Fixes#593955
When we construct a timestamp that would result in a timestamp that is earlier
than when the packet was received, reset the skew calculation as this is
probably a sign that the sender restarted or paused.
Fixes#593354
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain_rtcp):
Initialize return value to fix compiler warning about uninitialized
variable.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream), (free_stream),
(new_ssrc_pad_found):
Remove internal sync pad, use signals instead to get lip-sync
notifications.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_base_init),
(gst_rtp_jitter_buffer_class_init),
(gst_rtp_jitter_buffer_internal_links), (create_rtcp_sink),
(remove_rtcp_sink), (gst_rtp_jitter_buffer_request_new_pad),
(gst_rtp_jitter_buffer_release_pad),
(gst_rtp_jitter_buffer_sink_rtcp_event),
(gst_rtp_jitter_buffer_chain_rtcp),
(gst_rtp_jitter_buffer_get_property):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Make it possible to send SR packets to the jitterbuffer.
Check if the SR timestamps are valid by comparing them to the RTP
timestamps.
Signal the SR packet and the timing information to listeners.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_rtcp_chain), (gst_rtp_ssrc_demux_src_query):
Remove some unused code.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last seen RTP timestamp so that we can filter out
invalid SR packets.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (create_stream), (new_ssrc_pad_found):
Do not try to keep track of the clock-rate ourselves but simply get the
value from the jitterbuffer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add some debug info.
Pass the clock-rate to the jitterbuffer.
Also pass the clock-rate along with the rtp timestamp when getting the
sync parameters.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
Fix some debug.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of clock-rate changes and return the clock-rate together with
the rtp timestamps used for sync.
Don't try to construct timestamps when we have no base_time.
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Request a new clock-rate when the payload type changes.
Reset the jitter calculation when the clock-rate changes.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
Small cleanups and some more debug info.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
Also configure the next expected output seqnum when we get a seqnum-base
on the caps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix problem with using the output seqnum counter to check for input
seqnum discontinuities.
Improve gap detection and recovery, reset and flush the jitterbuffer on
seqnum restart. Fixes#556520.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_insert):
Fix wrong G_LIKELY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps):
Only update the seqnum-base when it was not already configured for the
streams.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (on_sender_timeout),
(create_session), (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (gst_rtp_bin_class_init),
(gst_rtp_bin_request_new_pad):
* gst/rtpmanager/gstrtpbin.h:
Add signal to notify listeners when a sender becomes a receiver.
Tweak lip-sync code, don't store our own copy of the ts-offset of the
jitterbuffer, don't adjust sync if the change is less than 4msec.
Get the RTP timestamp <-> GStreamer timestamp relation directly from
the jitterbuffer instead of our inaccurate version from the source.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add G_LIKELY macros, use global defines for max packet reorder and
dropouts.
Reset the jitterbuffer clock skew detection when packets seqnums are
changed unexpectedly.
* gst/rtpmanager/gstrtpsession.c: (on_sender_timeout),
(gst_rtp_session_class_init), (gst_rtp_session_init):
* gst/rtpmanager/gstrtpsession.h:
Add sender timeout signal.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert),
(rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Add some G_LIKELY macros.
Keep track of the extended RTP timestamp so that we can report the RTP
timestamp <-> GStreamer timestamp relation for lip-sync.
Remove server timestamp gap detection code, the server can sometimes
make a huge gap in timestamps (talk spurts,...) see #549774.
Detect timetamp weirdness instead by observing the sender/receiver
timestamp relation and resync if it changes more than 1 second.
Add method to report about the current rtp <-> gst timestamp relation
which is needed for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(on_sender_timeout), (check_collision), (rtp_session_process_sr),
(session_cleanup):
* gst/rtpmanager/rtpsession.h:
Add sender timeout signal.
Remove inaccurate rtp <-> gst timestamp relation code, the
jitterbuffer can now do an accurate reporting about this.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (calculate_jitter),
(rtp_source_process_rtp):
* gst/rtpmanager/rtpsource.h:
Remove inaccurate rtp <-> gst timestamp relation code.
* gst/rtpmanager/rtpstats.h:
Define global max-reorder and max-dropout constants for use in various
subsystems.
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Make the buffer metadata writable before inserting it in the
jitterbuffer because the jitterbuffer will modify the timestamps.
* gst/rtpmanager/rtpjitterbuffer.c:
Update method comment about requiring writable metadata on buffers.
* gst/rtpmanager/rtpsession.c: (rtp_session_process_sr),
(rtp_session_process_rtcp):
Make the RTCP buffer metadata writable because we want to modify the
metadata.
Fixes#546312.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Fix debug by logging the right seqnum.
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
When checking the seqnum, reset the jitterbuffer if the gap is too big,
we need to do this so that we can better handle a restarted source.
Fix some comments.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
Tweak the skew resync diff.
Use our working seqnum compare function in -base.
Rework the jitterbuffer insert code to make it clearer and more
performant by only retrieving the seqnum of the input buffer once and by
adding some G_LIKELY compiler hints.
Improve debugging for duplicate packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Fix a comment, we don't do skew correction here..
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Simply drop bad RTP packets with a warning instead of just posting an
error and stopping. This is a perfectly recoverable event and we don't
force people to use an rtpbin to filter out bad packets first.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Avoid waiting for a negative (huge) duration when the last packet has a
lower timestamp than the current packet.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Initialise with GST_CLOCK_TIME_NONE to avoid compiler warning.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init), (gst_rtp_jitter_buffer_init),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Disable sending out rtp packet lost events by default and make a
property to enabe it. We will likely enable it by default when the base
depayloaders have a default handler for them so that we don't send these
events all through the pipeline for now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_src_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Remove private version of a function that is in -base now.
Add src event handler.
Rework the jitterbuffer pushing loop so that it can quickly react to
lost packets and instruct the depayloader of them. This can then be used
to implement error concealment data.
