... when it has not yet been connected to.
Also, a condition variable is not a semaphore, so a lock/wait/unlock
sequence is inherently racy without any state checking. So switch to
a different lock and check the intended state.
Some GIR annotations were incorrect or even missing. The former isn't
good for bindings, while the latter is especially annoying for signal
handlers, as that means your arguments will get the wrong names in the
rendered documentation.
GST_VIDEO_BUFFER_FLAG_INTERLACED and GST_VIDEO_BUFFER_FLAG_TFF
flags are needed when processing SCTE 20 closed captions for an interlaced
stream, when we need to convert back to analog, in which case we need to match
the caption to the top or bottom field
... if (x265 version >= 1.9) requirement is satisfied.
The SEI messages were supported since x265 version 1.8
but there was API change from version 1.9
(contentLightLevelInfo was renamed to maxCLL and maxFALL)
This change makes it possible to create more than just 5 webrtc
data channels. The maximum number of data channels is exactly
DEFAULT_NUMBER_OF_SCTP_STREAMS / 2, therefore the limit is now
512.
Use proper API to flush libass events when we do
a flushing seek, and also do it in FLUSH_STOP
rather than FLUSH_START, so we can be sure
streaming has stopped.
Fixes seeking back in time.
Something seems to have changed in libass that
renders the old manual way of flushing events
ineffective and libass then seems to ignore
timestamps that are older than the ones last
seen then if we do it the old way.
Fixes#916
With latest XDG shell, we need to fait for the surface to have been
configured before we can attach a buffer to it. This is being enforce by
Weston with an error.
Fixes#933
Fixes the following error.
gstccconverter.c:677:7: error: variable 'len' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
if (flags & 0x40) {
^~~~~~~~~~~~
gstccconverter.c:698:10: note: uninitialized use occurs here
return len;
^~~
gstccconverter.c:677:3: note: remove the 'if' if its condition is always true
if (flags & 0x40) {
^~~~~~~~~~~~~~~~~~
gstccconverter.c:572:12: note: initialize the variable 'len' to silence this warning
guint len;
^
= 0
Prior to this, cccombiner stopped consuming video buffers when
data wasn't arriving on its caption pad. In a live situation,
when aggregator is timing out we should still output whatever
video buffers are present, even if no caption buffers can be
aggregated with them.
Since the addition of BUNDLE support, the pads and the transceivers
share a single transport stream. When getting stats from the stream,
filter by the ssrc of the current pad to avoid merging the stats for
different pads.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/889
It is necessary to implement this vmethod, as when the src pad
is marked as reconfigure, the base class will reset to src caps,
and the default update_src_caps simply queries the caps allowed
downstream without taking into account the caps set by
gst_aggregator_set_src_caps.
To make curlhttpsrc behave more like souphttpsrc, set the
BUFFER_OFFSET in its output buffers to match the segment
start. This means that in a HTTP RANGE request, the BUFFER_OFFSET
will match the value in the RANGE request.
To make it closer to a drop-in replacement for souphttpsrc,
expose the same gst_error_message_with_details as souphttpsrc,
so that applications can received the HTTP status code and reason
when an error occurs.
curlhttpsrc uses a single thread running the
gst_curl_http_src_curl_multi_loop() function to handle receiving
data and messages from libcurl. Each instance of curlhttpsrc adds
an entry into a queue in GstCurlHttpSrcMultiTaskContext and waits
for the multi_loop to perform the HTTP request.
Valgrind has shown up race conditions and memory leaks:
1. gst_curl_http_src_change_state() does not wait for the multi_loop
to complete before going to the NULL state, which means that
an instance of GstCurlHttpSrc can be released while
gst_curl_http_src_curl_multi_loop() still has a reference to it.
2. if multiple elements try to be removed from the queue at once,
only the last one is deleted.
3. source->caps is leaked
4. curl multi_handle is leaked
5. leak of curl_handle if URI not set
6. leak of http_headers when reusing element
7. null pointer dereference in negotiate caps
8. double-free of the default user-agent string
9. leak of multi_task_context.task
This commit changes the logic so that each element has a connection
status, which is used by the multi_loop to decide when to remove an
element from its queue. An instance of curlhttpsrc will not enter
the NULL state until its reference has been removed from the queue.
When shutting down the curl multi loop, the memory allocated from the
call to curl_multi_init() is now released.
When gstadaptivedemux uses a URI source element, it will re-use
it for multiple requests, moving it between READY and PLAYING
between each request. curlhttpsrc was leaking the http_headers
structure in this use case.
The gst_curl_http_src_negotiate_caps() function extracts the
"response-headers" field from the http_headers, but did not check
that this field might be NULL.
If the user-agent property is set, the global user-agent string
was freed. This caused a double-free error if the user-agent is
ever set a second time during the execution of the process.
There are situations within curlhttpsrc where the code needs
both the global multi_task_context mutex and the per-element
buffer_mutex. To avoid deadlocks, it is vital that the order in
which these are requested is always the same. This commit modifies
the locking order to always be in the order:
1. multi_task_context.task_rec_mutex
2. buffer_mutex
Fixes#876
Instead of creating a region, adding nothing to it, setting that as the
input region and destroying the region, you can instead just pass NULL
to wl_surface_set_input_region for the same effect.
Fixes#702
If bundle was used in combination with rtx, only the bundled transport
stream would have correctly configured rtx parameters.
Iterate over the payloads upfront in the bundled case to ensure the
correct payload mapping is set for the RTX elements.
With refactoring, supporting passphrase was removed accidently.
This commit re-enables srt encryption and validates 'passphrase'
by checking the return value of 'srt_setsockopt'.
fix: #694
Fix following build error
../subprojects/gst-plugins-bad/ext/openh264/gstopenh264dec.cpp(76): error C2121:
Note that msvc usually complains #if inside macro
gstladspa.c:360:5: error: zero-length ms_printf format string [-Werror=format-zero-length]
vad_private.c:108:3: error: this decimal constant is unsigned only in ISO C90 [-Werror]
gstdecklinkvideosink.cpp:478:32: error: comparison between 'BMDTimecodeFormat {aka enum _BMDTimecodeFormat}' and 'enum GstDecklinkTimecodeFormat' [-Werror=enum-compare]
win/DeckLinkAPI_i.c:72:8: error: extra tokens at end of #endif directive [-Werror]
win/DeckLinkAPIDispatch.cpp:35:10: error: unused variable 'res' [-Werror=unused-variable]
gstwasapiutil.c:733:3: error: format '%x' expects argument of type 'unsigned int', but argument 8 has type 'DWORD' [-Werror=format]
gstwasapiutil.c:733:3: error: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'guint64' [-Werror=format]
kshelpers.c:446:3: error: missing braces around initializer [-Werror=missing-braces]
kshelpers.c:446:3: error: (near initialization for 'known_property_sets[0].guid.Data4') [-Werror=missing-braces]
Replace legacy usage of DecodeFrame2 API in favour of the
recommended DecodeFrameNoDelay()
This fixes problems with DecodeFrame2() not (currently) returning
all frames in main/high streams with B-frames, and reduces latency -
previously openh264 would not return a decoded frame until the next
call to DecodeFrame2(). DecodeFrameNoDelay() returns them immediately.
If the last frame(s) produce errors, then we need to drop them
or else we spin forever failing to decode a frame and thinking
it'll get better if we wait for more data that's never coming.
The fdkaac decoder supports 6.1 / 7.1 channels with downmixer
since v0.1.4. Old versions can use AAC_PCM_OUTPUT_CHANNELS
instead of AAC_PCM_MAX_OUTPUT_CHANNELS.
Fixes#873
This is the equivalent of iceTransportPolicy in the RTCConfiguration
dictionary.
Only two values are implemented:
* all: default behaviour
* relay: only gather relay candidates
The third member of the iceTransportPolicy enum, "public", is
obsolete.
0a350c610d broke the build by only
building enum types with meson. It also removed gstsrt.c from the list
of sources, causing the plugin to fail to load.
squash! srt: Fix autotools build
gstsrtobject.c: In function ‘gst_srt_object_close’:
gstsrtobject.c:1036:7: error: function called through a non-compatible type [-Werror]
(GDestroyNotify) g_closure_unref);
/usr/include/glib-2.0/glib/gmem.h:121:8: note: in definition of macro ‘g_clear_pointer’
(destroy) (_ptr); \
^~~~~~~
gstsrtobject.c:1038:7: error: function called through a non-compatible type [-Werror]
(GDestroyNotify) g_closure_unref);
/usr/include/glib-2.0/glib/gmem.h:121:8: note: in definition of macro ‘g_clear_pointer’
(destroy) (_ptr); \
^~~~~~~
Arch Linux
gcc 8.2.1 20181127
glib 2.58.2
We have srt{client,server}{src,sink} elements in accordance to the
norm of the connection oriented protocols. However, SRT connection
mode can be changed by uri parameters so it requires an integrated
element to handle the parameters.
fix: #740
As a side-effect we can now actually store the line offset in the
line21dec element, and have to perform fewer transformations in the
decklink elements (which were also buggy as they assumed a single byte
triplet per meta).
When waylandsink is used on some other thread than the main wayland
client thread, the waylandsink implementation is vulnerable to a
condition related to registry and surface events which handled in
seperated event queue.
The race that may happen is that after a proxy is created, but
before the queue is set, events meant to be emitted via the yet to
set queue may already have been queued on the wrong queue.
Wayland 1.11 introduced new API that allows creating a proxy
wrappper which can help to avoid this race condition.
It depends on the framerate how many cc_data byte pairs are allowed per
frame, and the framerate is also needed for converting into the CDP or
MCC format as the framerate is part of the header metadata.
The wpe element is used to produce a video texture representing a web page
rendered off-screen by WPE. This element can be used to overlay HTML on top of
another video stream for instance.
The latter is going away in libfdk-aac 2.0.0. Instead, MPEG-style output
is always non-interleaved and WAV-style output is always interleaved.
Earlier libfdk-aac also defaults interleaving accordingly.
Since our reordering looks at the associated PCE indices instead of the
actual channel order, we're agnostic to the mapping.
For https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/825
Currently master code of gst1-plugins-bad use plain-string host name while passing it to
libnice agent: nice_agent_set_relay_info() in gstwebrtcice.c while adding turn_server(_add_turn_server).
It is observered that if we don't convert the host parameter by using gst_uri_get_host, it fails in libnice agent(0.1.14-1).
Code does, actually, set the host correctly but while passing params to nice_agent_set_relay_info, it uses incorrect one.
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/823
It fails to build only on Mac OSX with the following error.
In file included from ../subprojects/gst-plugins-bad/ext/opencv/gstopencv.cpp:45:
../subprojects/gst-plugins-bad/ext/opencv/gstcameracalibrate.h:96:38: error: a space is required between consecutive right angle brackets (use '> >')
std::vector<std::vector<cv::Point2f>> imagePoints;
^~
> >
1 error generated.
Fix: #817
As suggested in [the SSL_get_error manpage][1]. Upgrade the message to a
warning if the errno isn't 0 (success). The latter apparently means the
transport encountered an EOF (shutdown) without the shut down handshake
on the (D)TLS level. This happens quite often for otherwise normal DTLS
connections.
[1]: https://www.openssl.org/docs/man1.1.1/man3/SSL_get_error.html
Print out all errors from the OpenSSL error queue instead of just
looking at the topmost error. Using the callback interface also removes
the need for formatting using a buffer on the stack.
This reverts commit 73ebdb888e.
This isn't needed and it breaks srtpenc ! srtpdec, specifying the
roll-over counter manually is an advanced feature.
Also revert "srtp: Add "roc" caps field to the gst-launch example"
This reverts commit 67ae35813b.
https://bugzilla.gnome.org/show_bug.cgi?id=765079
ext/sctp/ext@sctp@@gstsctp@sha/sctpassociation.c.obj: In function `receive_cb':
/var/lib/jenkins/workspace/cerbero-cross-mingw32/workdir/sources/windows_x86/gst-plugins-bad-1.0-1.15.0.1/_builddir/../ext/sctp/sctpassociation.c:692: undefined reference to `_imp__ntohl@4'
Expanded to support image format to YV12/I422/I444. It's related to the
color bit-depth and profile of the codec. It can make configuring
appropriate profile according to bit-depth and format.
https://bugzilla.gnome.org/show_bug.cgi?id=791674
With prenegotiated channels, the data-channel protocol is not used and
instead the channel's negotiation is intended to be performed out of band in
some application-specific manner.
Comes with test!
This means that we will reject all operations before we've transitioned
into READY.
This also fixes the tests using the default GMainContext in the NULL
state instead of the webrtcbin internal GMainContext and thread. Also
removes a potential ordering race where on the element transitioning to
READY, an operations could have been queued on two different threads and
removing a guarentee on operation ordering.
It might be possible that if we set webrtcbin to the NULL state some
tasks (idle sources) are still executed and they might even freeze. The freeze
is caused because the webrtcbin tasks don't hold a reference to webrtcbin and
if it's last unref inside the idle source itself this will not allow the main
loop to finish because the main loop is waiting on the idle source to finish.
We now start and stop webrtcbin thread when changing states. This will allow
the idle sources to finish properly.
https://bugzilla.gnome.org/show_bug.cgi?id=797251
Fixes a race where the task could attempt to set
stream-start/caps/segment before the pad was active and would be
dropped resulting in a 'data-flow before stream-start' warning.
It is possible and often desirable to pass multiple ICE relays
to libnice agents, the "turn-server" property, while convenient
to use from the command line, does not allow that.
This adds a new action signal, "add-turn-server" to address that.
https://bugzilla.gnome.org/show_bug.cgi?id=797012
We now have options for all plugins, so we will just disable these in
the cerbero recipe instead. These require external deps, so they won't
affect gst-build either.
Although RTMP_ConnectStream() was failed, librtmp's internal memory
is not freed by RTMP_ConnectStream(), so RTMP_Close() should be called
before RTMP_Free()
https://bugzilla.gnome.org/show_bug.cgi?id=797058
Worst case it will be empty. This fixes a crash when the base class
calls data_received() when the stream is neither is_isobmff or
has_isoff_ondemand_profile.
https://bugzilla.gnome.org/show_bug.cgi?id=796745
gst_curl_http_src_remove_queue_item() can free qelement and then
we get an invalid memory reference when we do qelement->next a
couple of lines below. Take the next pointer earlier so that we can
safely free.
This fixes an issue with SSA/ASS subtitles, where subtitles
would fail to appear if there was already a subtitle on screen.
This was because `struct _GstAssRender` had a single
`GstBuffer *subtitle_pending` member. This meant that
the assrender context could only be aware of one subtitle
at a time.
This patch changes the subtitle_pending member to a
linked list of pending subtitles.
The `gst_ass_render_chain_text` function no longer needs
to care about whether there are already subtitles pending,
it simply appends new subtitles to the list.
The `gst_ass_render_chain_video` function has been modified
to handle the list of pending subtitles.
Finally, the `gst_ass_render_pop_text` function has been
modified to pop the entire list of pending subtitles.
https://bugzilla.gnome.org/show_bug.cgi?id=735944
When compiling with clang-6 this error raises:
raw_decoder.c:411:1: error: unused function 'cpr1204_crc'
[-Werror,-Wunused-function]
This patch only comments it out.
https://bugzilla.gnome.org/show_bug.cgi?id=796957
When compiling with clang-6 this error pops out:
raw_decoder.c:1011:62: error: implicit conversion from enumeration
type 'const vbi_modulation' to different enumeration type
'vbi3_modulation' [-Werror,-Wenum-conversion]
This is because function vbi3_bit_slicer_set_params() sets
vbi3_modulation as enum type parameter, nonetheless vbi_modulation
enum is passed. Both enums looks semantically equal, thus the fix is a
simple cast.
https://bugzilla.gnome.org/show_bug.cgi?id=796957
This is the native format that is in use by the webrtc audio processing
library internally, so this avoids internal {de,}interleaving and
format conversion (S16->F32 and back)
https://bugzilla.gnome.org/show_bug.cgi?id=793605
This uses the new path for OpenCV headers. OpenCV now have
master headers files per modules, which reduce the amount of
required includes. Note that HIGHGUI was included to get the
imgcodecs includes, which I fixed, though the master header is
missing the C headers, so I included that directly. All the
image stuff should be ported to C++ eventually. Finally, this
patch also update the header checks to reflect the modules that
are really being used.
... instead of doing it ourselves. Otherwise, we should add more
logic here (such as checking GstClock and etc) which was already provided by
GstBaseSrc.
https://bugzilla.gnome.org/show_bug.cgi?id=796842
Relaxed the wl_shell interface constrains, so application that
pass via GstContext the wl_surface can use waylandsink in a
compositor without wl_surface and zwp_fullscreen_shell.
Added support for zwp_fullscreen_shell.
https://bugzilla.gnome.org/show_bug.cgi?id=796772
When scanning paths for LADSPA plugins, don't try and load
every random file as a module, as g_module_open ends up throwing
errors on Windows.
Use a G_MODULE_SUFFIX and GST_EXTRA_MODULE_SUFFIX suffix check as
we do for GStreamer plugins.
https://bugzilla.gnome.org/show_bug.cgi?id=796450
Refactor transportsendbin, and change the way
pads are blocked on dtlssrtpenc so that they
don't interfere with state changes.
As well as being easier to read, this fixes
spurious failures shutting down webrtcbin
if DTLS negotiation hasn't completed yet.
Move the errant piece of dtlssrtpenc state change
management from dtlstransport in the Webrtc libs,
into the transportsendbin that does the rest of
the element management so it's all in one place.
The `CV_RGB` macro is now in `imgproc.hpp`.
Fixes:
../subprojects/gst-plugins-bad/ext/opencv/gsthanddetect.cpp:497:40: error: ‘CV_RGB’ was not declared in this scope
cvCircle (img, center, radius, CV_RGB (0, 0, 200), 1, 8, 0);
^~~~~~
When negotiation is triggered by receiving caps on our sink pad
probes, we could encounter a race condition where need-negotiation
is emitted and the application requires the creation of an offer
before the current caps were actually updated.
This led to retrieving incomplete caps when creating the offer,
using find_codec_preferences -> pad_get_current_caps.
Instead, as we save the caps in the probe callback anyway, it is better
and thread safe to use these if they were set.
https://bugzilla.gnome.org/show_bug.cgi?id=796801
Matches the output from a similar glimagesink pipeline when
rotating from an upstream gltransformation passed through
the affine transformation meta with xpos/ypos being set.
https://bugzilla.gnome.org/show_bug.cgi?id=794401
Fixes random crashes when an allocated webrtcbin isn't
given fresh 0-filled memory in its allocation. It works
mostly because GMutex and GCond are automatically initialised
in that case.
Move freeing of the pad blocks back to before we call the
GstBin state change function, as there's something racy
going on on the build server otherwise, where the pads don't
unblock during downward state changes.
This is a bit of a stab in the dark, since I can't recreate
the build server failure locally.
Release references in pad blocks and release the memory in the
dispose function too, in case the state change doesn't get
run (because calling the parent state change fails).
When changing state downward, we can't set pads
to inactive if they are blocked, it will deadlock
trying to acquire the streaming lock.
Just calling the parent state change function
will do the correct things to unblock probes and
set the pad inactive, so let it do that and
remove the probes after the parent state change
function has run
https://bugzilla.gnome.org/show_bug.cgi?id=796682
When max is GST_CLOCK_TIME_NONE in the query, it should not
be set in the query handler, this otherwise could lead to
impossible situations, where the minimum latency ended up
greater than the maximum.
https://bugzilla.gnome.org/show_bug.cgi?id=796603
The flush function immediately returned when pitch->next_buffer_offset
was 0.
This is clearly wrong, as next_buffer_offset can be 0 when a single
input buffer has been received, and no output buffer has been produced
before receiving EOS.
Simply remove that condition.
https://bugzilla.gnome.org/show_bug.cgi?id=796603
This lets users call gst_pad_get_current_caps on newly-added
pads to easily determine what to plug them into.
We cannot copy sticky events unconditionally in core,
see #719437https://bugzilla.gnome.org/show_bug.cgi?id=796387
This new element allows decoding and overlaying CEA-708 Closed Caption
streams over video.
* Supports CDP and cc_data closedcaption/x-cea-708 streams
* Uses pango to render CC stream
* Support GstVideoOverlayComposition meta if downstream supports is
Tested on various test files.
Remains to be fixed/improved:
* Switch to GstByteReader (for code safety)
* Switch to GString (instead of manual pango string construction)
* Move pango/rendering code outside of main 708 decoder file (so
that actual CC parser/decoder can be (re)used in other scenarios).
Initial patches and improvements by:
* CableLabs RUIH-RI Team <ruihri@cablelabs.com>
* Steve Maynard <steve@secondstryke.com>
* cjun.wang" <cjun.wang@samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=704881
zvbi switched to a lot more flexible CC detection in VBI.
The problem is that it returns a *lot* of non-VBI lines as containing
CC which isn't the case.
Current code from zapping/zvbi as of 2018-03-14. Files copied
are all LGPL v2+.
Changes from original zvbi code:
* Switch to gst-debug logging system
* Use glib for endianness detection
* Fix compilation warnings
Allows extracting GstVideoCaptionMeta from a stream and outputs
it to a standalone stream.
Part of a new 'ext' closedcaption plugin, since more features are
going to be added, which will depend on external dependencies such
as pango.
On debian system headers trigger compiler warnings like these,
don't error out on them:
/usr/include/directfb/direct/os/linux/glibc/waitqueue.h:95:1: note: previous definition of ‘direct_waitqueue_signal’ was here
Explicitly cast to void* because GCC 8 is (rightfully) upset that this is
"writing to an object of type ‘...’ with no trivial copy-assignment".
Caused by the new "class-memaccess" warning
This moves all the conversion related code to a single place, allows
less code-duplication inside compositor and makes the glmixer code less
awkward. It's also the same pattern as used by GstAudioAggregator.
The aggregated_frame is now called prepared_frame and passed to the
prepare_frame and cleanup_frame virtual methods directly. For the
currently queued buffer there is a method on the video aggregator pad
now.
Previously we assumed that the texture ID is going to be valid even
after unmapping the frame, as it was immediately unmapped before even
being used. Now we only unmap once we're done with the texture.
During element shutdown, the srtp encryption session
object can be cleaned up. In that case, return GST_FLOW_FLUSHING
from the chain function. Also properly return GST_FLOW_ERROR
upstream during actual errors.
https://bugzilla.gnome.org/show_bug.cgi?id=790508
Store a PTS of a highlight event directly into the event structure,
rather than the GST_EVENT_TIMESTAMP that will probably be removed
in GStreamer 2.0, and is hardly used.
https://bugzilla.gnome.org/show_bug.cgi?id=761477
If that threshold is reached, `iqa` will emit an ERROR message on the
bus, stopping any processing.
This way we can do a simpler comparison with gst-validate and the
process will error out if the specified threshold is reached.
https://bugzilla.gnome.org/show_bug.cgi?id=795428
We don't want to reset the muxer, otherwise the continuity counter will
reset after each segment and some software gets confused. We want to
create a continuous stream.
https://bugzilla.gnome.org/show_bug.cgi?id=794816
There are two issues, both related to dependency checking with the meson
support for the ladspa plugin.
With autotools, lrdf is handled like an optional dependency. But with
meson it is required. This makes the meson support less flexible and
inconsistent with autotools.
When autotools is used it properly checks if ladspa.h is available.
But with meson it does not, instead it treats lrdf as the main
dependency. This could cause a build failure if lrdf is installed, but
the ladspa sdk is not.
https://bugzilla.gnome.org/show_bug.cgi?id=794350
