gstreamer

mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-11-25 03:01:03 +00:00

Author	SHA1	Message	Date
Edward Hervey	a274bc5b76	mpegvideoparse: Fix level code Valid ranges are from 4 to 10 Valid ranges >> 1 are from 2 to 5 Valid ranges >> 1 - 2 are from 0 to 3 (and not from 1 to 4)	2012-03-02 11:07:47 +01:00
Edward Hervey	671550714f	mpegtsbase: Check harder for program changes And don't just rely on the section crc/version_number changing to indicate that the program actually changed.	2012-03-02 10:54:48 +01:00
Edward Hervey	097f09b823	mpegtsbase/tsdemux: Refactor seek and segment handling All calculations go through the mpegtspacketizer Remove unused variables/code	2012-03-01 18:15:51 +01:00
Edward Hervey	77ece06a3f	mpegtsbase: Error out on EOS without any pad Avoids ending up with hanging pipelines	2012-03-01 18:15:51 +01:00
Edward Hervey	a4899af8d6	mpegtspacketizer: Offset calculation Allows PCR<=>PTS<=>offset estimation/calculation Right now the calculation is very naive, but can be extended later on without disrupting the code in tsdemux/mpegtsbase	2012-03-01 18:15:51 +01:00
Edward Hervey	39cc29a7d2	mpegtspacketizer: clock fix and minor addition * Don't take into account packets that arrived at the same time as previous ones for clock skew estimation * Add convenience method for processing the next ts packet	2012-03-01 18:15:51 +01:00
Edward Hervey	c10fc17a1e	Revert "mpegtsdemux: Not apply various time the same PMT to a program when repetead" This reverts commit `8cb0e87f56`. mpegtspacketizer already checks if it's a new PMT or not	2012-03-01 18:15:51 +01:00
Edward Hervey	d920d9d64f	tsdemux: Remove all seeking code It was more than bogus	2012-03-01 18:15:51 +01:00
Xavier Queralt	b5004e058b	hlsdemux: don't set the fetcher's location twice Calling gst_element_make_from_uri already does it and filesrc fails when using file protocol in a location	2012-02-29 09:52:39 +01:00
Guillaume Desmottes	ddfcfb5a7a	Add missing GLIB_DISABLE_DEPRECATION_WARNINGS Suppress warnings about deprecated threading and GValueArray API, so git compiles with -Werror. https://bugzilla.gnome.org/show_bug.cgi?id=670982	2012-02-28 22:55:34 +00:00
Xavier Queralt	5b0d2ce2b2	hlsdemux: don't fail for playlists smaller than fragments-cache https://bugzilla.gnome.org/show_bug.cgi?id=670963	2012-02-28 12:29:03 +00:00
Thibault Saunier	5c2e6dc512	mpegtspacketizer: catch section lengths extending past the buffer length This is probably the cause for an occasional crash while streaming MPEG. Blind fix after staring at the code and following logic, so may or may not fix the issue, I cannot test. (Port of `4275a70cb5` from mpegdemux)	2012-02-27 09:57:45 -03:00
Thibault Saunier	58a210e3d3	mpegtspacketizer: support more character set encodings Support UTF-16BE, EUC-KR (KSX1001), GB2312 and ISO-10646/UTF8 text encoding and fixed new line for multibyte encoding https://bugzilla.gnome.org/show_bug.cgi?id=664257 (Port of `9759d66407` from the mpegtsdemux element)	2012-02-27 09:42:27 -03:00
Alessandro Decina	368534f117	adpcmdec: link to libgstbase	2012-02-26 20:43:32 +01:00
Thibault Saunier	336710d355	tsbase: Fix parsing of PSI table IDs (Ported from mpegtsdemux `d8fd874f52`)	2012-02-24 19:08:40 -03:00
Thibault Saunier	f977d7e743	tsdemux: Avoid unlinkely leaks and segfault	2012-02-24 15:28:35 -03:00
Edward Hervey	b6d98aea5f	tsdemux: Use new clock skew estimation for outgoing timestamps Only used in live mode	2012-02-24 17:53:52 +01:00
Edward Hervey	e6ff2f7b83	tsdemux: Various code cleanup and dead code removal	2012-02-24 17:52:33 +01:00
Edward Hervey	4bc7cd04c1	mpegtspacketizer: Fix issues with skew code * Always try to get a timestamp for the algorithm * Remove dead variable * Return proper default value	2012-02-24 17:47:38 +01:00
Wim Taymans	8743905721	dataurisrc: fix docs and unit test	2012-02-24 12:53:52 +01:00
Thibault Saunier	6a8d2c45f6	mpegtspacketizer: Estimate clock skew and retimestamps buffers more precisly Apply the EPTLA algotithm to estimate clock skew. Reusing code from -good/gst/rtpmanager/rtpjitterbuffer.c	2012-02-24 10:57:09 +01:00
Thibault Saunier	48a699812b	tsdemux: Clean up AAC caps mess	2012-02-24 10:57:05 +01:00
Thibault Saunier	dc8b6c678d	tsdemux: Reindent gstmpegdesc.h	2012-02-24 10:57:02 +01:00
Thibault Saunier	67fd590e9a	tsdemux: Support more DTS/AC3 descriptors	2012-02-24 10:56:58 +01:00
Edward Hervey	6ef0ae4ffe	tsdemux: Remove useless finalize()	2012-02-24 10:56:14 +01:00
Mark Nauwelaerts	4c9ac0886a	h264parse: consider nal_length_size when constructing codec_data Fixes #670699.	2012-02-23 21:18:31 +01:00
Edward Hervey	8b73baeced	tsdemux: Use incoming timestamps in live mode	2012-02-23 16:39:48 +01:00
Edward Hervey	8f433e1677	tsdemux: Report latency (700ms)	2012-02-23 16:39:48 +01:00
Edward Hervey	c492b00b69	mpegtsbase: Query whether upstream is live or not	2012-02-23 16:39:48 +01:00
Wim Taymans	470854b6e3	update for new memory api	2012-02-22 02:10:35 +01:00
David Schleef	342a04c9d2	colorspace: Fix v210 writing out of bounds	2012-02-20 20:11:13 -08:00
Matej Knopp	e4e0d3ce02	Fix compiler warnings	2012-02-20 16:20:55 +01:00
Wim Taymans	a9f5def9d1	Merge branch 'master' into 0.11 Conflicts: ext/opus/gstopusparse.c gst/colorspace/colorspace.c	2012-02-20 16:07:50 +01:00
Matej Knopp	232ef9cc39	dvdspu should forward video caps event	2012-02-20 16:03:24 +01:00
David Schleef	e0db2faa12	colorspace: clamp intermediates when dithering	2012-02-19 00:16:31 -08:00
Thibault Saunier	8cb0e87f56	mpegtsdemux: Not apply various time the same PMT to a program when repetead Sometimes their are several times the same PMT applying to a same program in a stream, tsdemux was totally baffled when this was happening, we now keep the one we already applied so it works properly.	2012-02-17 12:19:20 -03:00
Thibault Saunier	adc947e127	tsdemux: fix glib deprecation	2012-02-17 12:19:20 -03:00
Wim Taymans	e4754d274b	RELEASE 0.11.1	2012-02-17 11:05:37 +01:00
Wim Taymans	f08e247051	Merge branch 'master' into 0.11	2012-02-17 09:01:56 +01:00
Thiago Santos	39bad1d6ca	wrappercamerabinsrc: Put source to null when resetting caps It seems that v4l2src isn't happy when switching formats on ready state, it works when putting it to NULL. Keep this workaround in wrappercamerabinsrc while v4l2src isn't fixed. Fixes #849832	2012-02-16 22:51:21 -03:00
Wim Taymans	2fca270f19	Merge branch 'master' into 0.11 Conflicts: gst/mpegtsdemux/mpegtsbase.c gst/mpegtsdemux/mpegtspacketizer.c gst/mpegtsdemux/tsdemux.c gst/mve/gstmvedemux.c	2012-02-16 14:33:20 +01:00
Thiago Santos	2ce709cf4a	wrappercamerabinsrc: Put source in NULL when it fails changing state When source is being reset to change caps, check the return of the state syncing function to avoid leaving the source in an unconsistent state.	2012-02-16 01:30:23 -03:00
Tim-Philipp Müller	b3592ebda8	mve: don't return a boolean for a GstFlowReturn fixes playback.	2012-02-16 00:30:05 +00:00
Thibault Saunier	1182dd0c1b	tsdemux: Avoid throwing FLOW_ERROR on last PCR processing error In the case of scanning last pcr, errors are not critical, so we keep the stream flowing.	2012-02-15 15:48:44 -03:00
Thibault Saunier	cda0d3aed8	tsdemux: Add AAC latm support	2012-02-15 15:48:44 -03:00
Thibault Saunier	6094ec27b1	tsdemux: Minor refactoring/code cleaning ... add some debugging symbols in the mean time.	2012-02-15 15:48:44 -03:00
Mark Nauwelaerts	c7216162e4	h264parse: remove _chain hack As we can now rely upon being passed upstream delineated data in ::handle_frame(), the latter can also parse avc formatted data without having to intercept baseparse's chain function. While this evidently requires 2 separate parsing paths, each can be streamlined accordingly.	2012-02-15 17:15:10 +01:00
Mark Nauwelaerts	b8a78c6b37	videoparsers: adjust to standardized baseparse frame state tracking	2012-02-15 17:15:07 +01:00
Mark Nauwelaerts	ca5010cc4b	Merge branch 'master' into 0.11	2012-02-15 17:14:34 +01:00
Mark Nauwelaerts	5cce89b048	h264parse: use proper NALU offset for config data insertion ... which has to be the position of the start code, which is almost always but need not be 4 bytes.	2012-02-15 14:29:45 +01:00
Wim Taymans	52fce49459	h263parse: fix compilation	2012-02-15 13:39:29 +01:00
Wim Taymans	16810321ee	videoparsers: don't leak event Unref the event when we don't chain up to the parent	2012-02-15 13:02:06 +01:00
Wim Taymans	f9c99b4713	videoparsers: chain up to parent event handler Chain up to the parent event handler to get the default behaviour instead of returning FALSE.	2012-02-15 12:56:55 +01:00
Wim Taymans	eff7037447	Merge branch 'master' into 0.11	2012-02-14 11:19:04 +01:00
Mark Nauwelaerts	b10b9cf109	videoparsers: adjust to modified baseparse API	2012-02-13 18:44:01 +01:00
Mark Nauwelaerts	ea6a192b13	pcapparse: adjust to modified baseparse API	2012-02-13 18:42:53 +01:00
Mark Nauwelaerts	67a8e53aef	h264parse: fixup merge	2012-02-13 18:42:53 +01:00
Jan Schmidt	debf4984df	mpegtsmux: Trivial bug fix. Don't copy data from an uninited buffer.	2012-02-13 23:05:35 +11:00
Thomas Vander Stichele	bbbdbb536b	multifdsink: refactored in -base	2012-02-12 22:59:52 +01:00
Wim Taymans	6c2f5814ef	h264parse: report after merge	2012-02-10 16:52:46 +01:00
Wim Taymans	1119f6ee41	Merge branch 'master' into 0.11 Conflicts: ext/chromaprint/gstchromaprint.c ext/mpeg2enc/Makefile.am ext/voaacenc/gstvoaacenc.c gst/dvbsuboverlay/gstdvbsuboverlay.c gst/mpegtsdemux/mpegtsbase.c gst/sdp/gstsdpdemux.c gst/videoparsers/gsth264parse.c sys/d3dvideosink/d3dvideosink.c tests/examples/camerabin/gst-camera-perf.c tests/examples/camerabin/gst-camerabin-test.c tests/examples/camerabin2/gst-camerabin2-test.c tests/examples/mxf/mxfdemux-structure.c tests/examples/scaletempo/demo-main.c	2012-02-10 16:46:50 +01:00
Mark Nauwelaerts	1cbd755a2c	h264parse: unobfuscate frame parsing code	2012-02-10 14:52:03 +01:00
Wim Taymans	20ffe99cc7	h264parse: fix refcount error	2012-02-09 14:42:23 +01:00
Tim-Philipp Müller	8765068879	Remove legacyh264parse element One h264 parser ought to be enough for anybody. https://bugzilla.gnome.org/show_bug.cgi?id=648002	2012-02-08 20:09:39 +00:00
Wim Taymans	de1f89bf07	GST_FLOW_WRONG_STATE -> GST_FLOW_FLUSHING	2012-02-08 16:37:13 +01:00
Wim Taymans	667c84b59c	audiovis: port to 0.11 some more	2012-02-07 12:02:49 +01:00
Thiago Santos	3b549c4dbd	camerabin: prevent captures from being lost when switching resolutions When switching capture caps, camerabin1 resets its state to ready to force a new caps to be negotiated. This causes ongoing captures to be aborted. This commit adds a condition to wait for captures to finish before going to ready state.	2012-02-06 10:48:32 -03:00
Thiago Santos	9bd40e92ce	camerabin: Improve debug message about processing counter Mention on the logs how many capture operations might have been lost	2012-02-06 10:48:32 -03:00
Vincent Penquerc'h	ddff93320d	rotate: angle is in radians already, do not scale it Other plugins use radians, and the angle documentation says radians. https://bugzilla.gnome.org/show_bug.cgi?id=669365	2012-02-04 22:07:54 +00:00
Vincent Penquerc'h	e84bbcbeab	rotate: fix description string to match what the element does https://bugzilla.gnome.org/show_bug.cgi?id=669365	2012-02-04 22:07:54 +00:00
Vincent Penquerc'h	2eef9828d6	mpegtsdemux: do not emit no-more-pads Doing so may fix some things, but breaks others (new streams being added in the future). https://bugzilla.gnome.org/show_bug.cgi?id=665814	2012-02-03 17:37:16 +00:00
Mark Nauwelaerts	c36bb8b73d	h264parse: decrease passthrough negotiation preference Also ensure parsing fixed caps when negotiating rather than failing to handle non-fixed list cases. See #668471.	2012-02-03 11:27:32 +01:00
Tim-Philipp Müller	f8f4620451	build: fix CFLAGS order and LIBS order _BAD_CFLAGS should always come first, then GST_PLUGINS_BASE_CFLAGS, then GST_BASE_CFLAGS then GST_CFLAGS. Same for libs: first plugins base libs, then GST_BASE_LIB then GST_LIBS.	2012-02-03 00:50:33 +00:00
Mark Nauwelaerts	bc0dd274ee	debugutils: port to 0.11	2012-02-02 23:21:50 +01:00
Vincent Penquerc'h	0d1c9624ea	mpegpsmux: include specific AAC stream-format in template caps This elements seems to support raw and adts AAC. https://bugzilla.gnome.org/show_bug.cgi?id=665394	2012-02-02 12:37:02 +00:00
Vincent Penquerc'h	2dec0950cf	tsdemux: add explicit supported AAC stream-format in template caps https://bugzilla.gnome.org/show_bug.cgi?id=665394	2012-02-02 12:37:02 +00:00
Vincent Penquerc'h	27f21d31ac	mpegtsmux: specify in template caps we only take raw/adts AAC format This appears to be what this element supports. https://bugzilla.gnome.org/show_bug.cgi?id=665394	2012-02-02 12:37:02 +00:00
Vincent Penquerc'h	5c8ca4e1d0	mpegdemux: include specific AAC stream-format types in template caps https://bugzilla.gnome.org/show_bug.cgi?id=665394	2012-02-02 12:37:01 +00:00
Tim-Philipp Müller	260e2e7427	build: ignore GValueArray deprecation warnings for the time being until this gets sorted out with the GLib folks and we have a viable alternative. https://bugzilla.gnome.org/show_bug.cgi?id=667228	2012-02-01 17:54:22 +00:00
Tim-Philipp Müller	b66e84040b	adpcmdec: fix up for GstAudioDecoder API change	2012-02-01 17:06:11 +00:00
Mark Nauwelaerts	da89903f81	h264parse: disable optimized packetized processing for reverse playback ... as baseparse then provides whole chunks of data (as it should) at once to be parsed, and so the assumptions used to optimize are no longer valid. Fixes #667560.	2012-02-01 13:53:17 +01:00
Mark Nauwelaerts	283f97cb79	h264parse: also mind SEI position for config data insertion Fixes #668627.	2012-02-01 13:53:15 +01:00
Mark Nauwelaerts	136f42974d	h264parse: unbreak optimized packetized NALU collection processing ... in that it was so optimized it did not consider grouping NALU into AU altogether. Fixes #668627.	2012-02-01 13:53:13 +01:00
Rob Clark	521e8b199b	videoparsers: set interlaced field in caps for mpeg2 https://bugzilla.gnome.org/show_bug.cgi?id=667218	2012-01-31 11:51:37 +00:00
Alessandro Decina	f547336fdc	mpegtsmux: update after collectpads2 changes	2012-01-31 08:44:04 +01:00
Wim Taymans	3b74cca741	update for HEADER flag	2012-01-30 17:17:16 +01:00
Olivier Crête	70539e9c93	rtpmux: Unref non-forwarded events Also, don't unref forwarded ones	2012-01-29 18:03:53 +00:00
Olivier Crête	3cccb06dc3	rtpmux: resync iterator on resync	2012-01-28 16:57:03 +00:00
Olivier Crête	b9fd586a61	rtpmux: Re-push sticky events on input pad change	2012-01-27 19:04:24 +01:00
Olivier Crête	83118f5d82	dtmf: Use new-style caps	2012-01-27 19:04:23 +01:00
Sebastian Dröge	2e0bc90903	mpegdemux: Don't leak the SCHEDULING query	2012-01-27 16:56:53 +01:00
Matej Knopp	7bcd991f93	Port mpegdemux to 0.11	2012-01-27 16:56:23 +01:00
Vincent Penquerc'h	8147669971	plenty: fixup glib deprecations	2012-01-27 15:47:07 +00:00
Thiago Santos	f4d6e03b9b	camerabin: Add viewfinder colorspace conversion to default flags This make the default settings more likely to work. If needed, one can optimize by disabling conversions with the flags.	2012-01-27 07:37:56 -03:00
Thiago Santos	5edd64eec6	camerabin2: Removing solved TODO and fixing a typo	2012-01-27 07:37:55 -03:00
Mark Nauwelaerts	498e4df9d9	adpcmdec: port to 0.11	2012-01-26 23:28:28 +01:00
Mark Nauwelaerts	936bee00f4	adpcmenc: port to 0.11	2012-01-26 23:28:20 +01:00
Olivier Crête	7aead77649	autoconvert: port to 0.11	2012-01-25 18:04:55 +01:00
Olivier Crête	4878946130	bayer: Intersect transformed caps with filter	2012-01-25 18:04:55 +01:00
Olivier Crête	73d57f1848	rtpmux: Don't leak gvalue from iterator	2012-01-25 17:49:26 +01:00
Wim Taymans	bc1067ce4b	more porting	2012-01-25 16:46:44 +01:00
Mark Nauwelaerts	9dc7571c75	port some more to new memory API	2012-01-25 16:22:09 +01:00
Wim Taymans	21073e98cf	port to new memory API	2012-01-25 14:51:25 +01:00
Sebastian Dröge	a2a4300241	Merge branch 'master' into 0.11 Conflicts: configure.ac ext/kate/gstkateenc.c gst/colorspace/colorspace.c gst/mpegvideoparse/mpegvideoparse.c	2012-01-25 13:22:43 +01:00
Alessandro Decina	8fb0beaf00	mpegpsdemux: limit the amount of scanning done on duration queries Limit the amount of data scanned when looking for PTSes in duration queries as a failsafe for kinda broken, potentially large files with sparse or no PTSes.	2012-01-25 13:06:46 +01:00
Alessandro Decina	0961e2f494	mpegpsdemux: don't scan for the last PTS if the first wasn't found	2012-01-25 13:06:45 +01:00
Olivier Crête	071c6e8f15	dtmf: port to 0.11	2012-01-25 11:55:13 +01:00
Olivier Crête	e1b7da5410	rtpvp8: port to 0.11	2012-01-25 11:54:54 +01:00
Olivier Crête	0829043b87	videomaxrate: Remove, videorate includes the same functionality now	2012-01-25 11:54:54 +01:00
Olivier Crête	e5ff5ee2db	rtpmux: port to 0.11	2012-01-25 11:54:53 +01:00
Vincent Penquerc'h	cf74b0bc76	mpegtsdemux: fix frequent deadlock demuxing MPEG TS A previous patch to add streams early to fix playback of low bitrate streams causes frequent deadlock of a nature I'm at loss how to fix. I'm not certain whether it's a bug in decodebin2, or in that mpegtsdemux patch. Since it causes a major regression, let it be disabled for now.	2012-01-23 17:47:45 +00:00
Mark Nauwelaerts	d8fdd3485b	mpegtsdemux: break out when stream identified	2012-01-23 14:22:18 +01:00
Mark Nauwelaerts	b00ed32c5a	mpegtsdemux: avoid NULL manipulation if invalid input	2012-01-23 14:22:18 +01:00
Mark Nauwelaerts	f1810502a7	mpegdemux: avoid NULL manipulation if invalid input	2012-01-23 14:22:18 +01:00
Mark Nauwelaerts	552f991ba0	mpegdemux: avoid some unlikely leaks	2012-01-23 14:22:17 +01:00
Mark Nauwelaerts	c63be1402a	mpegvideoparse: prevent some fall-through cases	2012-01-23 14:22:17 +01:00
Mark Nauwelaerts	ccee94e30d	mve: use signed loop variable ... when using it in i >= 0.	2012-01-23 14:22:12 +01:00
Mark Nauwelaerts	6b71ccb552	mve: ensure best target found	2012-01-23 14:13:47 +01:00
Mark Nauwelaerts	c004a1e462	festival: enhance some error case handling	2012-01-23 14:13:45 +01:00
Mark Nauwelaerts	ae02c7820b	nuvdemux: check directly for valid buffer ... rather than doing so indirectly in (incomplete) semantic way.	2012-01-23 14:13:43 +01:00
David Schleef	4b11ced2eb	Revert "!colorspace: fix odd size problems" This reverts commit `e2e6fdcb6b`. Untested commit was accidentally pushed.	2012-01-22 16:59:37 -08:00
David Schleef	de562a194f	Revert "colorspace: Fix out-of-bound errors for v210" This reverts commit `3b8b87cb6c`. Untested commit was accidentally pushed.	2012-01-22 16:58:59 -08:00
David Schleef	96f7c5374f	inter: Fix compilation Fix up previously botched rebase.	2012-01-22 16:55:46 -08:00
David Schleef	3b8b87cb6c	colorspace: Fix out-of-bound errors for v210	2012-01-22 15:52:15 -08:00
David Schleef	e2e6fdcb6b	!colorspace: fix odd size problems	2012-01-22 15:52:15 -08:00
David Schleef	4eb4602746	inter: Add channel property	2012-01-22 15:52:15 -08:00
David Schleef	70684f4d1b	colorspace: Add jpeg color-matrix conversion	2012-01-22 15:49:44 -08:00
David Schleef	f02ee5b403	inter: Add subtitle inter elements	2012-01-22 15:49:44 -08:00
Tim-Philipp Müller	840a3a5b36	Remove legacy mpegvideoparse plugin There's a new one in the videoparsers plugin.	2012-01-22 19:27:59 +00:00
Tim-Philipp Müller	a15029922f	multifdsink: make git ignore generated files	2012-01-22 19:13:50 +00:00
Tim-Philipp Müller	5791ed71ad	h263parse: make level and profile fields in caps strings For consistency with other caps. https://bugzilla.gnome.org/show_bug.cgi?id=658438	2012-01-22 19:12:33 +00:00
Tim-Philipp Müller	27354f065d	mpegpsdemux: handle corner-case of short read in pull_buffer better It's extremely unlikely, but there are corner cases where a short read might happen, so handle that, just in case.	2012-01-19 15:56:12 +00:00
Wim Taymans	27ee60a27b	port to new gthread API	2012-01-19 11:34:26 +01:00
Sebastian Dröge	f6427af9f9	sdpdemux: Port to GIO and the new udpsrc/sink properties	2012-01-18 16:35:04 +01:00
Sebastian Dröge	31dddb7c9f	multifdsink: Add $(GST_PLUGINS_BAD_CFLAGS) for the i18n header file	2012-01-18 15:48:00 +01:00
Mark Nauwelaerts	dbc8bbd755	adpcmdec: port to audiodecoder	2012-01-17 21:37:48 +01:00
Mark Nauwelaerts	1a73bf0b79	adpcmenc: port to audioencoder	2012-01-17 21:37:45 +01:00
Mark Nauwelaerts	3f3a21ef49	pcapparse: port to 0.11	2012-01-16 22:52:13 +01:00
Mark Nauwelaerts	0d088c7eb1	irtspparse: port to 0.11	2012-01-16 22:51:59 +01:00
Vincent Penquerc'h	6b4038fed3	debugspy: fix string leak	2012-01-16 17:30:22 +00:00
Vincent Penquerc'h	31cb57fbb7	mpegdemux: fix missing finalize chaining to parent This code does not seem to trigger on my test streams, so it's a bit of a blind fix, but seems safe enough to push.	2012-01-16 17:10:30 +00:00
Sebastian Dröge	90c075b1f6	multifdsink: Move multifdsink from gst-plugins-base to gst-plugins-bad	2012-01-16 11:29:27 +01:00
Reynaldo H. Verdejo Pinochet	26a1ca09aa	Android, Fix wrong dinamic linking attempt gstcodecparsers is built as an static library. This change fixes building with the Android buildsystem.	2012-01-13 15:57:33 -03:00
Vincent Penquerc'h	6cad606ead	sirenenc: fix base class call mixup in finalize	2012-01-13 12:08:28 +00:00
Tim-Philipp Müller	699677ed8a	Merge remote-tracking branch 'origin/master' into 0.11	2012-01-13 00:11:54 +00:00
Vincent Penquerc'h	76a481c726	patchdetect: remove (leaking) dead code	2012-01-12 17:11:14 +00:00
Vincent Penquerc'h	a940c6a84d	inter: remove (leaking) dead code	2012-01-12 16:48:38 +00:00
Vincent Penquerc'h	72eb8209a5	hlsdemux: fix queue leak	2012-01-12 15:58:36 +00:00
Vincent Penquerc'h	083d21ce3d	dccpclientsink: fix string leak	2012-01-12 15:43:51 +00:00
Vincent Penquerc'h	2b81720a22	y4mdec: fix event leak	2012-01-12 15:19:01 +00:00
Sebastian Dröge	a01a4ea2d3	Merge branch 'master' into 0.11 Conflicts: gst/mpegtsdemux/tsdemux.c gst/videoparsers/gsth264parse.c tests/check/elements/camerabin2.c	2012-01-10 15:50:37 +01:00
Vincent Penquerc'h	6cf84a0348	interlace: fix caps leaks	2012-01-10 13:25:27 +00:00
Vincent Penquerc'h	5ea1601dd9	interlace: fix ref leak	2012-01-10 13:25:27 +00:00
Edward Hervey	fcf511aa8f	tsdemux: Don't provide bogus values in non-TIME push-mode Only take the upstream segment values in GST_FORMAT_TIME	2012-01-10 11:45:25 +01:00
Edward Hervey	24408bce96	tsdemux: Handle rollover in PTS and DTS Also hands back-rollover which can happen with PTS	2012-01-10 11:45:22 +01:00
Sebastian Dröge	adb4b010ed	mpeg4videoparse: Don't update caps on every buffer	2012-01-09 14:39:43 +01:00
Sebastian Dröge	c76890b7fa	mpeg4videoparse: Don't call gst_buffer_memcmp() with a NULL buffer	2012-01-09 14:28:14 +01:00
Vincent Penquerc'h	2dc41db862	h264parse: use the framerate that was copied a few lines above	2012-01-09 11:03:24 +00:00
Vincent Penquerc'h	e81ecb250a	mpegvideoparse: add a couple consts on string literal arrays	2012-01-09 10:58:56 +00:00
Sebastian Dröge	2a255cca8b	wrappercamerabinsrc: GstBaseCameraSrc is the base class, not GstBin	2012-01-09 08:40:48 +01:00
David Biomech360	36c496b8f1	coloreffects: added support for a visual magnifier color filter to be used in gnome-video-effects https://bugzilla.gnome.org/show_bug.cgi?id=666542	2012-01-06 11:24:45 +00:00
Vincent Penquerc'h	4f27b2b4fe	h264parse: fix test and set not using the same input This fixes H.264 output not having a set framerate, and confusing some of the elements downstream (such as interlace).	2012-01-06 10:54:11 +00:00
Vincent Penquerc'h	1c25aab906	interlace: avoid dividing by zero on unkbown framerate If the framerate is unknown, we cannot generate meaningful buffer timestamps/durations, so set them to _NONE instead of calculating something wrong and dividing by 0.	2012-01-06 10:54:11 +00:00
Sebastian Dröge	2a0ca49bd5	audiovisualizers: Update for the new raw audio caps	2012-01-05 10:37:37 +01:00
Mark Nauwelaerts	c4abaf1428	h264parse: fix and tweak frame timestamping ... to run with properly init'ed variables, and to only perform interpolation in safe cases.	2012-01-04 11:16:18 +01:00
Mark Nauwelaerts	9d0c7d054e	h264parse: prefer negotiating pass-through	2012-01-03 22:10:20 +01:00
Mark Nauwelaerts	dcd2ee421a	h264parse: mark byte-stream AU frame with inserted codec NALs as keyframe	2012-01-03 22:08:07 +01:00
Mark Nauwelaerts	75b8ddb6cf	h264parse: properly determine skip amount when no NAL start found yet	2012-01-03 20:27:07 +01:00
Mark Nauwelaerts	c54144cc16	h264parse: some more proper parse state reset	2012-01-03 20:26:51 +01:00
Wim Taymans	b592f431e3	GST_FLOW_UNEXPECTED -> GST_FLOW_EOS	2012-01-03 15:26:54 +01:00
Edward Hervey	f017f9a913	camerabin2: encoding profiles are objects in 0.11	2012-01-02 15:55:21 +01:00
Edward Hervey	f1aea6f06d	mpegtsbase: Swallow incoming caps event Otherwise we end up asking subclasses to push the event forward, which will fail since no pads are created yet.	2011-12-30 18:18:10 +01:00
Edward Hervey	a646d8d1e2	tsdemux: Properly carry over the timestamp	2011-12-30 18:17:26 +01:00
Edward Hervey	a3ba21d3b9	tsdemux: Use incoming timestamps in live mode	2011-12-30 18:03:04 +01:00
Edward Hervey	99a7b0a692	tsdemux: Report latency (700ms)	2011-12-30 18:03:03 +01:00
Edward Hervey	e48966ecf1	mpegtsbase: Query whether upstream is live or not	2011-12-30 18:03:02 +01:00
Matej Knopp	4a8b6f0121	tsdemux: Activate pad before settings caps https://bugzilla.gnome.org/show_bug.cgi?id=665677	2011-12-30 17:52:17 +01:00
Edward Hervey	4917e16458	Merge remote-tracking branch 'origin/master' into 0.11 Conflicts: tests/examples/camerabin2/Makefile.am	2011-12-30 11:49:27 +01:00
Edward Hervey	f70a623418	Merge remote-tracking branch 'origin/master' into 0.11-premerge Conflicts: docs/libs/Makefile.am ext/kate/gstkatetiger.c ext/opus/gstopusdec.c ext/xvid/gstxvidenc.c gst-libs/gst/basecamerabinsrc/Makefile.am gst-libs/gst/basecamerabinsrc/gstbasecamerasrc.c gst-libs/gst/basecamerabinsrc/gstbasecamerasrc.h gst-libs/gst/video/gstbasevideocodec.c gst-libs/gst/video/gstbasevideocodec.h gst-libs/gst/video/gstbasevideodecoder.c gst-libs/gst/video/gstbasevideoencoder.c gst/asfmux/gstasfmux.c gst/audiovisualizers/gstwavescope.c gst/camerabin2/gstcamerabin2.c gst/debugutils/gstcompare.c gst/frei0r/gstfrei0rmixer.c gst/mpegpsmux/mpegpsmux.c gst/mpegtsmux/mpegtsmux.c gst/mxf/mxfmux.c gst/videomeasure/gstvideomeasure_ssim.c gst/videoparsers/gsth264parse.c gst/videoparsers/gstmpeg4videoparse.c	2011-12-30 11:41:17 +01:00
Thiago Santos	e4d3d2dcd1	camerabin2: clarify some message logs Be explicit on which encodebin we're switching profiles on the log messages	2011-12-30 00:02:19 -03:00
Thiago Santos	9de92cf9dc	camerabin2: fix gvalue leak	2011-12-27 16:40:38 -03:00
Thiago Santos	399ec70a08	camerabin2: secure event ref when sending event to parent class camerabin2 needs to hold an extra ref on send_event before sending it to the parent class as it will need to use it after the parent handles it.	2011-12-27 16:40:38 -03:00
Thiago Santos	44eb631841	camerabin2: port to 0.11	2011-12-23 19:01:20 -03:00
Thiago Santos	36fbb8eea4	basecamerabinsrc: remove redundant functions gst_bin_get_by_interface should be enough for applications. Haven't seen anyone using those other than wrappercamerabinsrc.	2011-12-22 16:17:56 -03:00
Thiago Santos	d9e13c4268	camerabin2: remove unused helper function This drop_eos_probe function is not used anymore, remove it	2011-12-22 16:13:59 -03:00
Thiago Santos	0ce5021058	camerabin2: Fix A/V sync for captures Audio src was pushing newsegments starting from 0, even when its buffers were not starting with 0 as their timestamps. Add a buffer probe that checks the ts of the first buffer and uses that to push a newsegment, just like we do for video on wrappercamerabinsrc.	2011-12-20 15:05:27 -03:00
Thiago Santos	88e3d82201	wrappercamerabinsrc: Push newsegments on video capture start Pushing newsegments to inform muxers about the start time of the video buffer timestamps.	2011-12-20 14:46:26 -03:00
Wim Taymans	8506342fb6	y4m: update for new interlace caps	2011-12-19 18:44:33 +01:00
Vincent Penquerc'h	b23e6bfa70	mpegtsdemux: only warn when we see a PID with unknown type This is quite frequent, and we will just ignore that stream, so an error is not warranted.	2011-12-19 13:18:51 +00:00
Alessandro Decina	570ba0c84a	h264parse: avoid pushing SPS/PPS at start only if both are found in stream Avoid injecting SPS/PPS nals only if both are already present in the stream. Fixes some AVC clips that happen to have only PPS nals in stream.	2011-12-19 12:36:39 +01:00
Alessandro Decina	58cc609b08	mpeg4videoparse: handle force key unit events	2011-12-18 18:37:08 +01:00
Alessandro Decina	94ae4ca833	h264parse: do wait for a keyframe when handling force key unit events Although some decoders can start decoding with just PPS and SPS and waiting for a keyframe is bad when the keyframe interval is large, gst-ffmpeg does need a keyframe to start decoding.	2011-12-18 17:40:57 +01:00
Alessandro Decina	38a5719c53	mpegtsmux: unset the current PCR stream when starting a new unit Unset the current PCR stream when starting a new unit so that afterwards a new stream is selected as PCR and PAT and PMT tables are regenerated.	2011-12-18 17:32:11 +01:00
Alessandro Decina	ee429ba7b8	mpegtsmux: fix key unit event handling when muxing both audio and video Take only video buffers into account when deciding when to cut so that new units start with a video keyframe.	2011-12-18 17:31:18 +01:00
Vincent Penquerc'h	fe1f79b9bb	videomeasure: port to GstCollectPads2	2011-12-15 13:47:55 +00:00
Vincent Penquerc'h	f4ccc7dff8	mxfmux: port to GstCollectPads2 Only tested with audio, I can't get it to accept video (before the port).	2011-12-15 13:39:41 +00:00
Vincent Penquerc'h	1029619766	mpegtsmux: port to GstCollectPads2 I think the stream lock use is correct, not 100% sure.	2011-12-15 13:22:24 +00:00
Vincent Penquerc'h	c03c4d7fac	mpegpsmux: port to GstCollectPads2	2011-12-15 13:08:42 +00:00
Vincent Penquerc'h	a8a0b11e3f	frei0r: port to GstCollectPads2 Untested, no sample pipeline mentioned, and I've no idea what this plugin does, but since all the previous ports work out of the box, this is deemed to work until evidence it doesn't.	2011-12-15 13:04:51 +00:00
Vincent Penquerc'h	c826a197ce	compare: port to GstCollectPads2	2011-12-15 13:02:16 +00:00
Vincent Penquerc'h	4db6f8f7f2	asfmux: port to GstCollectPads2	2011-12-15 12:59:57 +00:00
Tommi Myöhänen	9648d100b4	camerabin2: fix leak on error handling Camerabin2 parses warning messages with gst_message_parse_warning(message, &err, &debug) but doesn't free given GError and debug strings. Documentation shows that the ownership of those fields is transferred to caller (they are marked "[transfer full]" in the API docs).	2011-12-14 08:32:50 -03:00
Julien Isorce	f21ea162ad	mpegtsparse: check offset when retrieving table_id on malformed packets Fix bug #665988	2011-12-13 10:44:47 +01:00
Sebastian Dröge	0d40afa9f0	Revert "mpegtsparse: check offset when retrieving table_id on malformed packets" This reverts commit `e62978d045`.	2011-12-13 10:44:42 +01:00
Julien Isorce	e62978d045	mpegtsparse: check offset when retrieving table_id on malformed packets	2011-12-12 15:05:16 +01:00
Vincent Penquerc'h	63110cab94	liveadder: fix buffer leak	2011-12-12 14:00:22 +00:00
Tim-Philipp Müller	ad6ea8fbe9	mpegpsmux: put stream headers into output caps Basic version with only the system header and the program stream map. An advanced version could include codec-specific bits like SPS/PPS too. This is useful in connection with e.g. multifilesink to make sure new files always start with the stream headers.	2011-12-11 00:13:51 +00:00
Tim-Philipp Müller	eaeba16a56	mpegpsmux: add "aggregate-gops" property to aggregate GOPs into buffer lists Useful in connection with multifilesink, for example, to make sure the new file always starts with a keyframe.	2011-12-11 00:10:15 +00:00
Tim-Philipp Müller	c4cb38f394	mpegpsmux: remember primary video stream	2011-12-11 00:10:15 +00:00
Tim-Philipp Müller	1f45eb7950	mpegpsmux: remember whether an incoming buffer is a keyunit or not	2011-12-11 00:10:12 +00:00
Tim-Philipp Müller	7f8adea477	videoparsers: fix LIBS order in Makefile.am	2011-12-08 22:49:50 +00:00
Vincent Penquerc'h	09f0860a10	mpegtsdemux: only offset timestamps when live This code is to sync to a live source when there is a delay between start and when we receive the first buffer, so it does not make sense in a non live case. This fixes playback of streams where the input timestamps are based off some arbitrary offset. https://bugzilla.gnome.org/show_bug.cgi?id=663756	2011-12-08 12:46:20 +00:00
Sebastian Dröge	dcf04269e1	autoconvert: Remove the initial-identity property from autoconvert Initially creating an identity element to forward serialized events downstream before any caps are known is broken behaviour. Serialized events should only be forwarded downstream if the caps are already known, otherwise autopluggers and other elements using pad-blocks will fail. This behaviour also doesn't work anymore after basetransform was fixed to queue serialized events until the caps are known as a result of fixing bug #659571. See bug #599469, #665205.	2011-12-07 13:50:19 +01:00
Thibault Saunier	6b3a314d36	videoparsers: Do not not skip startcode when needed Fix: https://bugzilla.gnome.org/show_bug.cgi?id=665631	2011-12-06 17:05:52 -03:00
Alessandro Decina	a1305b949c	h264parse: handle force key unit events Send SPS/PPS on force key unit events. Useful for example when serving HLS without transcoding.	2011-12-06 13:16:29 +01:00
Edward Hervey	1c50dab50c	h264parse: Use faster parsing variant when input is packetized Reduces latency and cpu usage https://bugzilla.gnome.org/show_bug.cgi?id=665584	2011-12-05 19:04:17 +01:00
Mark Nauwelaerts	9604342af3	h264parse: reflow slice nal processing	2011-12-05 13:11:39 +01:00
Mark Nauwelaerts	ef24518b60	h264parse: optimize slice nal processing Only minimal slice info is needed here to determine real frame start, so no need to parse extensively. Fixes #665418.	2011-12-05 13:11:04 +01:00
Sebastian Dröge	2cdb069b9f	autoconvert: Implement iterate_internal_links function on the sinkpad and srcpad	2011-12-05 08:57:29 +01:00
Alessandro Decina	4474db4e71	h264parse: let upstream PAR override in-stream PAR	2011-12-01 09:07:18 +01:00
Alessandro Decina	21b063a78c	h264parse: rework PAR parsing And in the process refactor _update_src_caps a bit	2011-12-01 09:06:56 +01:00
Luciana Fujii Pontello	6d85d4882a	h264parse: respect pixel-aspect-ratio Parse pixel-aspect-ratio in vui information.	2011-12-01 08:23:22 +01:00
Stefan Sauer	467fd98e5b	spacespace: whitespace cleanups	2011-11-30 22:12:27 +01:00
Stefan Sauer	4a40bd5936	wavescape: also add colormodes like in spacescope	2011-11-30 22:11:40 +01:00
Stefan Sauer	00ac111477	audiovisualizer: update README	2011-11-30 15:13:04 +01:00
Stefan Sauer	11590ac0b6	spacescope: add color-modes In colormode we split the signal in low,mid,high frequency parts and draw them separately into red, gree, blue color channels.	2011-11-30 15:11:50 +01:00
Stefan Sauer	52d185f4ae	audiovisualizers: streamline the line_aa code Have a reusable dot_aa code and reuse in the line drawing.	2011-11-30 15:11:50 +01:00
Tim-Philipp Müller	65e8564343	mpegtsmux: fix build in uninstalled setup Add -base libs includes to CFLAGS, fix order of LIBS.	2011-11-30 10:35:12 +00:00
Alessandro Decina	777c1f034f	mpegtsmux: add support for force key unit events Handle force key unit events outputting PAT and PMT when all_headers=TRUE	2011-11-30 08:56:48 +01:00
Alexey Fisher	2099a39459	mpegpsdemux: recalculate adjust if difference is negative One of my dvds jump on some position and miss about 1 minute of stream. The reason was mpeg timestamps. On some position scr difference is negative. It produced negative timestamps. Since it was converted to unsigned value, gstreamer timestamps was invalid. Instead of increasing mpeg ts, they was decreasing till it started to be positive. The jump in timestamps caused mpeg2dec to skip frames to make QoS happy. This patch just make diff unsigned to avoid negative values. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> https://bugzilla.gnome.org/show_bug.cgi?id=656115	2011-11-29 11:35:11 +00:00
Thibault Saunier	e1bacb4813	codecparser: mpeg4: Look for resync code in _mpeg4_parse This way the API is simpler and users can call 1 single function for packet detection.	2011-11-28 21:25:34 -03:00
Thibault Saunier	5555b5fa9d	mpeg4videoparse: Properly handle profile and level in caps Fix #660234	2011-11-28 21:25:34 -03:00
Thibault Saunier	48ad76e538	mpeg4videoparse: Port to the new mpeg4parser library	2011-11-28 21:25:34 -03:00
Thibault Saunier	db4d4979ab	mpeg4videoparse: Move to the videoparsers plugin Rename a few variables to use the same convention as others elements in this plugin Conflicts: gst/videoparsers/gstmpeg4videoparse.c	2011-11-28 21:25:34 -03:00
Tim-Philipp Müller	f585848d4b	Merge remote-tracking branch 'origin/master' into 0.11	2011-11-28 23:20:58 +00:00
Thiago Santos	9364d13c02	camerabin2: viewfinderbin: use faster cast macro Use cast macro without type checks when we know it should work.	2011-11-28 18:48:52 -03:00
Thiago Santos	b5f97fd033	camerabin2: viewfinderbin: Link elements directly to use faster version ffmpegcolorspace and videoscale should always link successfully, use the fast pad linking version instead of calling the generic helper function.	2011-11-28 18:48:52 -03:00
Thiago Santos	f6d47a4206	camerabin2: micro optimize linking some more	2011-11-28 18:48:51 -03:00
Vincent Penquerc'h	4735a7554b	mpeg4videoparse: fix number of bytes read for fixed time increment The spec I found says "16 bits". The existing code used log2(somevalue)+1. ffmpeg uses log2(somevalue-1)+1. The code now uses log2(somevalue-1)+1, and this makes it work with some sample video without breaking another sample. Now, I'm far from certain I've got the right spec, I found it by searching the internet, so... https://bugzilla.gnome.org/show_bug.cgi?id=654666	2011-11-28 15:22:56 +00:00
Vincent Penquerc'h	f1a4791f74	mpegdemux: Try to add all streams early This will allow us to signal no-more-pads to avoid hitting the decodebin2 overrun.	2011-11-28 15:10:47 +00:00
Vincent Penquerc'h	fb66b3c2ac	mpegtsdemux: handle pads with no data Some streams declare PIDs but will not send data for them. Ensure we time out on those, and both send new segments to keep their time synchronized with the rest, and do not wait forever before deciding to signal no-more-pads. https://bugzilla.gnome.org/show_bug.cgi?id=659924	2011-11-28 15:08:13 +00:00
Vincent Penquerc'h	f909c57546	mpegtsdemux: signal no-more-pads when appropriate We track streams for which a data callback is set (and for which pads will be added only when data is received), and signal no-more-pads when the last pad is added. https://bugzilla.gnome.org/show_bug.cgi?id=659924	2011-11-28 15:08:06 +00:00
Vincent Penquerc'h	9715fc3189	mpegdemux: take into account offset of first buffer This fixes playback when the source starts later than the playback pipeline, and when a source drops for a while then restarts. https://bugzilla.gnome.org/show_bug.cgi?id=657794	2011-11-28 14:01:43 +00:00
Vincent Penquerc'h	918d2e710f	mpegdemux: fix some more video freezing There was a second threshold, which apparently needs to be smaller than the first, though I'm not certain of it as I don't understand yet this nest of wtf that is the mpeg demuxer timing logic. Fixes video freezing on one (corrupted) MPEG sample. It would previously never think it was out of the discontinuity, and would push buffers with no timestamp. Now this took me more than a day's poking at the thing, for just one constant change, and I'm scared to have to touch this again :S https://bugzilla.gnome.org/show_bug.cgi?id=655804	2011-11-28 13:57:42 +00:00
Vincent Penquerc'h	7960280afb	mpegdemux: catch smaller PTS dicontinuities In a test stream, I get one buffer with a PTS of about 15 seconds in the future compared to the previous one, and next buffers with timestamps continuing where the original ones left off. This caused the sink to wait 15 seconds to display the frame while more frames queued up, and then dump all the subsequent frames as they "arrived too late". Maybe that threshold should be made configurable, but for now, make it more smaller to catch more of these. https://bugzilla.gnome.org/show_bug.cgi?id=655804 Non AV streams keep using the larger threshold (10 minutes), as subtitles may arrive only every so often.	2011-11-28 13:57:29 +00:00
Vincent Penquerc'h	7521b597f4	various: fix pad template ref leaks https://bugzilla.gnome.org/show_bug.cgi?id=662664	2011-11-28 13:08:27 +00:00
Matej Knopp	f949930621	videoparsers: fix format warnings https://bugzilla.gnome.org/show_bug.cgi?id=662618	2011-11-28 00:04:16 +00:00
Tim-Philipp Müller	025ce3e6ca	Merge remote-tracking branch 'origin/master' into 0.11	2011-11-27 23:33:45 +00:00
Tim-Philipp Müller	98b9d602c1	aiffparse: extract ID3 tags embedded in ID3 chunks https://bugzilla.gnome.org/show_bug.cgi?id=664725	2011-11-27 23:19:49 +00:00
Edward Hervey	b78b980d72	Merge remote-tracking branch 'origin/master' into 0.11 Conflicts: ext/faac/gstfaac.c ext/opus/gstopusdec.c ext/opus/gstopusenc.c gst/audiovisualizers/gstspacescope.c gst/colorspace/colorspace.c	2011-11-25 12:48:58 +01:00
Stefan Sauer	c61f85da82	audiovisualizers: add aa-line code and user for wave/space-scope	2011-11-24 19:04:17 +01:00
René Stadler	e6df0b672f	videoparsers: port to 0.11 Unit tests missing for now.	2011-11-24 12:08:55 +01:00
Vincent Penquerc'h	1d0f770545	colorspace: fix width/height mismatches https://bugzilla.gnome.org/show_bug.cgi?id=663238	2011-11-24 10:49:16 +01:00
Sebastian Dröge	ca6ae54d5f	mpeg4videoparse: Use the sinkpad template caps as a fallback, not the srcpad ones	2011-11-24 10:26:25 +01:00
Sebastian Dröge	dc2c61faf5	mpegvideoparse: Implement ::get_sink_caps vfunc to propagate downstream caps constraints upstream	2011-11-24 10:14:06 +01:00
Sebastian Dröge	61fad46dca	h263parse: Implement ::get_sink_caps vfunc to propagate downstream caps constraints upstream	2011-11-24 10:09:59 +01:00
Sebastian Dröge	b10c1f277f	diracparse: Implement ::get_sink_caps vfunc to propagate downstream caps constraints upstream	2011-11-24 10:08:27 +01:00
Sebastian Dröge	e7cd086970	mpeg4videoparse: Implement ::get_sink_caps vfunc to propagate downstream caps constraints upstream	2011-11-24 10:05:30 +01:00
Tim-Philipp Müller	bd92bc966f	sdpdemux: update for gstrtpbin -> rtpbin renaming	2011-11-24 00:56:45 +00:00
Matej Knopp	9d0bdcf6d7	Fix printf format compiler warnings on OS X / 64 bit https://bugzilla.gnome.org/show_bug.cgi?id=662618	2011-11-23 23:43:15 +00:00
Tim-Philipp Müller	da43e59aab	smooth: fix printf format compiler warning in debug message https://bugzilla.gnome.org/show_bug.cgi?id=664631	2011-11-23 16:03:15 +00:00
René Stadler	461f1971dd	frei0r: normalize boolean property default values to TRUE/FALSE Glib barks at us with a warning when we pass e.g. 4.	2011-11-23 12:43:48 +01:00
Stefan Sauer	03f1f0214e	audiovisualizers: update README and TODO comments	2011-11-23 11:31:44 +01:00
Stefan Sauer	3ba8b3c0ad	spacescope: use the drawhelpers and add a draw-style property Like in wavescope support drawing dots and lines.	2011-11-23 11:21:15 +01:00
Wim Taymans	0a9387c43c	Merge branch 'master' into 0.11 Conflicts: ext/opus/gstopusdec.c ext/opus/gstopusenc.c ext/opus/gstopusparse.c gst/audiovisualizers/gstwavescope.c gst/filter/Makefile.am gst/filter/gstfilter.c gst/filter/gstiir.c gst/playondemand/gstplayondemand.c	2011-11-23 11:08:39 +01:00
Stefan Sauer	e3d1a50c0d	audiovisualizers: add some simple drawing helpers for reuse Add a (uninstalled) header with simple drawing macros	2011-11-23 08:42:01 +01:00
Stefan Sauer	b9c9540735	smoothwave: remove element unported from 0.8 The wavescope element does achieve the same effect.	2011-11-23 08:42:01 +01:00
Stefan Sauer	85aba22118	wavescope: add a style property for drawing modes Add a style enum of { dots, lines}. Now this elements is a superset of smoothwave.	2011-11-23 08:42:01 +01:00
Sebastian Pölsterl	9759d66407	mpegtsparse: support more character set encodings Support UTF-16BE, EUC-KR (KSX1001), GB2312 and ISO-10646/UTF8 text encoding and fixed new line for multibyte encoding https://bugzilla.gnome.org/show_bug.cgi?id=664257	2011-11-22 11:35:00 +00:00
Stefan Sauer	aa4b5b3bf5	playondemand: remove unported plugin from 0.8 These days one would do the effect e.g. using gnonlin.	2011-11-22 09:11:35 +01:00
Stefan Sauer	bae725ed1f	speed: tiny doc blob clarification	2011-11-22 09:10:57 +01:00
Stefan Sauer	bf7c118c3c	freeverb: add a freeverb port Freeverb is a public domain reverb implementation. Port it as a gstreamer element and make use of gstreamer specific features (gap aware, disconts, controller, ...).	2011-11-22 09:10:57 +01:00
Wim Taymans	e813abf631	update for activation changes	2011-11-21 13:37:20 +01:00
Stefan Sauer	143bcd974b	smooth: port to 0.10 Port from GstElement to GstVideoFilter. Fix FIXMEs. Cleanup naming. Expose left out property (kuma-only).	2011-11-21 08:27:19 +01:00
Stefan Sauer	cc210b8ff6	passthrough: remove obsolete element It is not built by default. We have identity for some of the needs and otherwise audio/videofilter base classes.	2011-11-20 20:16:03 +01:00
Stefan Sauer	931f7b2c59	filter: remove filter plugin We don't build it anyway and we have audioiirfilter in good.	2011-11-20 20:10:49 +01:00
Stefan Sauer	d1578f042a	inter: fix leftover boilerplace comments	2011-11-20 20:10:49 +01:00
Thiago Santos	524c478fa1	camerabin2: Also reset video/audio filters before capturing Video and audio custom filter element should also be reset before starting a new capture, otherwise we get wrong-state errors	2011-11-19 16:22:29 -03:00
Wim Taymans	567032b5f5	update for new scheduling query	2011-11-18 17:59:47 +01:00
Mark Nauwelaerts	1f3b4ad574	h264parse: remove redundant code ... now that what should not be needed is really not needed anymore to cover up bogus stuff that has been FIXMEd.	2011-11-18 17:20:10 +01:00
Mark Nauwelaerts	7fae33a661	h264parse: fix up AU collection processing On the one hand, no need to collect nal if processing last one. On the other hand, ensure AU collection processing to have sufficient next NAL data in normal cases. Fixes #663180.	2011-11-18 17:20:08 +01:00
Mark Nauwelaerts	66543b3dd9	h264parse: mind to-be-skipped data in subsequent re-used offsets	2011-11-18 17:20:06 +01:00
Mark Nauwelaerts	e12044c359	h264parse: avoid additional NAL parsing if no AU collection is needed	2011-11-18 17:20:03 +01:00
Mark Nauwelaerts	9db239e1ec	h264parse: some more get_caps tweaking ... by having it use sink template rather than src template, and not passing an downstream parsed(=true) to upstream.	2011-11-18 17:20:00 +01:00
Wim Taymans	b948769e6e	add parent to activate functions	2011-11-18 13:58:41 +01:00
Wim Taymans	bc6ed0bf97	Merge branch 'master' into 0.11 Conflicts: ext/celt/gstceltdec.c ext/opus/gstopusdec.c ext/opus/gstopusdec.h ext/opus/gstopusenc.c ext/opus/gstopusenc.h ext/opus/gstopusparse.c	2011-11-17 17:32:42 +01:00
Wim Taymans	940de5b195	add parent to pad functions	2011-11-17 15:53:42 +01:00
Stefan Sauer	d2f2955f18	collectpads: port API changes	2011-11-17 08:53:23 +01:00
Sebastian Dröge	d746cd7d67	mpeg4videoparse: Change rank to PRIMARY+1	2011-11-16 10:57:55 -08:00
Sebastian Dröge	ec089662de	mpeg4videoparse: Don't require parsed=false on the sinkpad caps	2011-11-16 10:57:24 -08:00
Sebastian Dröge	f3f9e4b978	h264parse: Implement ::sink_get_caps to allow stream-format conversion again Just proxying the downstream caps will prevent h264parse from accepting a different stream-format than what is supported downstream, although it could convert to a different stream-format.	2011-11-16 10:39:40 -08:00
Wim Taymans	6d92ecac75	add parent to query function	2011-11-16 17:30:38 +01:00
Edward Hervey	e500ec524c	tsdemux: Add notes on synchronization and scheduling	2011-11-16 12:47:58 +01:00
Wim Taymans	37e081fc61	update for renamed flags Use the _check_reconfigure method instead of checking flags.	2011-11-16 12:42:24 +01:00
Jonas Larsson	5099ff23af	h264parse: outgoing byte stream prefix always has size 4 Fixes #664123.	2011-11-16 10:57:30 +01:00
Wim Taymans	85afc77dea	_query_peer_() -> _peer_query_()	2011-11-15 17:55:50 +01:00
Wim Taymans	5231ae7252	_peer_get_caps() -> _peer_query_caps()	2011-11-15 17:24:07 +01:00
Wim Taymans	03713e5045	change getcaps to query	2011-11-15 16:34:13 +01:00
David King	92f07e3898	camerabin: Document requirement for PLAYING state As described in GNOME bug 663998, the element must be in the PLAYING state before calling capture-start. https://bugzilla.gnome.org/show_bug.cgi?id=664048	2011-11-14 23:28:29 -03:00
Thiago Santos	1d5b324e7d	camerabin2: Also reset audio elements when video capture finishes Audio elements also need to be reset after each capture, do it together with the video elements' reset	2011-11-14 17:48:52 -03:00
Thiago Santos	aab3a73ccd	camerabin2: Add one debug line about camerabin2 being idle	2011-11-14 13:06:29 -03:00
Thiago Santos	54351a0129	camerabin2: Remove video elements' state clearing from start-capture Reduce start-capture workload by moving the elements' state reseting to the finishing steps of the capture. This reduces the time start-capture takes to actually start a capture and return to its caller, improving user experience. As the elements' state reset is now triggered from the message handling function, it needs to spawn a new thread, changing state from the pad's task would cause a deadlock.	2011-11-14 13:06:29 -03:00
Thiago Santos	c635e4bc3b	camerabin2: keep track of video recording state Adds a new variable to keep track of the state of the video recording in camerabin2. This allows start-capture to reject new video recording requests when one is already ongoing. This fixes one of check tests.	2011-11-14 13:06:28 -03:00
Tim-Philipp Müller	357d7bdfed	Update for GstURIHandler get_protocols() changes	2011-11-13 23:55:56 +00:00
Wim Taymans	d3f42035fe	Merge branch 'master' into 0.11	2011-11-11 10:39:17 +01:00
Matej Knopp	a08b3bfa23	mpegvideoparse: add support for progressive frames https://bugzilla.gnome.org/show_bug.cgi?id=663782	2011-11-10 19:58:13 -03:00
Stefan Sauer	f8abc7e734	audiovisualizer: port to 0.11	2011-11-10 23:20:32 +02:00
Wim Taymans	59b4bcd27e	Merge branch 'master' into 0.11	2011-11-10 12:14:19 +01:00
Wim Taymans	8546951222	chain up in set_clock	2011-11-10 12:11:21 +01:00
Thiago Santos	c7db5db632	camerabin2: protect image location list with mutex Rename the image taglists' mutex into image capture mutex and use it also for the image capture list to prevent concurrent access from different threads (application and capture threads).	2011-11-09 12:30:58 -03:00
Thiago Santos	27e01e02a4	camerabin2: Handle null taglists for images Add NULL and check for them to the image capture taglist list, representing that a capture has no application tags set.	2011-11-09 12:30:58 -03:00
Thiago Santos	9ab6406f23	camerabin2: Don't store preview location if preview isn't requested Do not store preview location is post-previews is false, this would mess up preview naming in case application switches between enabling and disabling previews	2011-11-09 12:30:33 -03:00
Lasse Laukkanen	5ca3c9477e	camerabin2: Avoid blocking in start-capture and send application tags later Tags are currently sent from start-capture, which is run in the application thread. For images we can delay the tags pushing to the buffer probe and push the tags with the location event and reduce start-capture time.	2011-11-09 11:45:55 -03:00
Wim Taymans	dbdaa23742	Merge branch 'master' into 0.11 Conflicts: gst/colorspace/colorspace.c	2011-11-09 12:19:04 +01:00
Thijs Vermeir	8529526c54	dtmf: fix compiler warning for uninitialized values	2011-11-09 11:56:07 +01:00
Wim Taymans	0d0444e0fa	remove query types	2011-11-09 11:55:14 +01:00
Olivier Crête	d937da4c0c	dtmfsrc: Reject start/stop requests that come out of order	2011-11-08 17:45:48 -05:00
Olivier Crête	d15d524fec	dtmf: Post messages when starting to send/receive DTMF This way, the UI can display the DTMF events as they as being sent.	2011-11-08 17:45:48 -05:00
Thiago Santos	74df06d8c6	camerabin2: Decrement processing counter when message handling finishes Some messages might be interesting to applications, so we can only decrement the processing counter and send the idle notification when those messages are posted on the pipline's bus	2011-11-08 08:13:20 -03:00
Lasse Laukkanen	ad1ddaf53a	camerabin2: change post-previews property default value as false Generating and posting preview image always comes with a performance penalty so set default value as false. The preview-caps property that defines the preview image format is also NULL by default, so instead of generating preview image of unspecified format by default explicit action from application should be required for enabling preview image posting feature. Application also has to add custom code to be able to handle preview messages on its message handling function anyway.	2011-11-08 07:09:41 -03:00
Vincent Penquerc'h	d0443cfb65	colorspace: fix r210 writing only half a scanline https://bugzilla.gnome.org/show_bug.cgi?id=663203	2011-11-07 17:15:14 +00:00
Vincent Penquerc'h	0ff703b520	adpcm: add more consts, espcially for static const data	2011-11-07 16:41:42 +00:00
Vincent Penquerc'h	9674c5aefa	autoconvert: merge caps instead of using union It's a lot faster, and preserves caps ordering. https://bugzilla.gnome.org/show_bug.cgi?id=663346	2011-11-07 12:16:37 +00:00
Vincent Penquerc'h	4275a70cb5	mpegdemux: catch section lengths extending past the buffer length This is probably the cause for an occasional crash while streaming MPEG. Blind fix after staring at the code and following logic, so may or may not fix the issue, I cannot test.	2011-11-07 11:59:12 +00:00
Vincent Penquerc'h	b3d751667d	mpegpsdemux: fix zero length packet handling https://bugzilla.gnome.org/show_bug.cgi?id=631416	2011-11-07 11:17:00 +00:00
Wim Taymans	62544179e2	Merge branch 'master' into 0.11	2011-11-07 10:02:00 +01:00
Reynaldo H. Verdejo Pinochet	506f97a975	Fix missing sources on bayer's buildsystem androgenizer call	2011-11-04 18:06:51 -03:00
Stefan Sauer	9f73890892	controller: port to new controller location and api	2011-11-04 20:14:01 +01:00
Wim Taymans	8ec6da7797	more template fixes	2011-11-04 16:41:44 +01:00
Wim Taymans	eaad7e58b0	more template fixes	2011-11-04 12:31:19 +01:00
Wim Taymans	c8adc4f8c8	make request pads take _%u	2011-11-04 12:22:37 +01:00
Wim Taymans	ac27b5bcc8	tag: update for tag API removal	2011-11-02 12:10:03 +01:00
Wim Taymans	769a9791a4	Merge branch 'master' into 0.11	2011-11-02 10:31:24 +01:00
Wim Taymans	17a982fe31	structure: fix for api update	2011-11-02 09:08:23 +01:00
Wim Taymans	e14fbcc070	caps: update for new API	2011-11-02 09:08:23 +01:00
Thiago Santos	d4105d4b56	camerabin2: On capture error, skip previews When the camera source fails to do some capture, skip the next preview and decrement processing counter.	2011-11-01 11:49:17 -03:00
Lasse Laukkanen	37aa6a9c71	camerabin2: track also preview images with processing counter Makes camerabin2 only signal that it is idle after all previews have been generated, images are captured and saved, and videos have been finished properly.	2011-11-01 11:49:17 -03:00
Tim-Philipp Müller	10d31a588d	Update for pad API changes GstProbeType, GstProbeReturn and GstActivateMode -> GstPad*	2011-11-01 00:45:25 +00:00
Robert Swain	e3b7cb8899	fieldanalysis: Don't reset the context on DISCONT On discont, the queue of frames was being cleared, but also the context reset. We only need to clear the queue.	2011-10-31 18:20:32 +01:00
Tim-Philipp Müller	c186b74296	kate, bayer, tsdemux: update for caps and taglist API changes	2011-10-31 14:51:01 +00:00
Wim Taymans	9ca3734e52	make elements compile again	2011-10-28 15:16:43 +02:00
Wim Taymans	a54cf2ccac	mpegtsdemux: fix compilation	2011-10-27 16:23:26 +02:00
Wim Taymans	ce41348f78	Merge branch 'master' into 0.11	2011-10-27 16:13:56 +02:00
Stefan Sauer	69f8921e2c	interfaces: clean up the use of iface and class/klass	2011-10-21 15:04:05 +02:00
Tim-Philipp Müller	4060056ce6	assrender, nuvdemux: unref buffers with gst_buffer_unref()	2011-10-18 14:41:48 +01:00
Wim Taymans	effab293cb	Merge branch 'master' into 0.11	2011-10-18 14:32:05 +02:00
Sreerenj Balachandran	f8239ff692	h264parse: correct debug message and remove some dead code See #661113.	2011-10-17 11:17:50 +02:00
Sreerenj Balachandran	0a478db7dd	h264parse: correct parsing of "numberOfPictureParameterSets" See #661113.	2011-10-17 11:17:47 +02:00
Edward Hervey	d6d26e9f6e	bayer2rgb: Fix pad template caps	2011-10-17 10:19:20 +02:00
Wim Taymans	4a3dbe3d42	y4m: port to 0.11	2011-10-16 17:41:45 +02:00
Wim Taymans	0806e5cbb9	bayer: port to 0.11	2011-10-16 16:28:58 +02:00
Wim Taymans	7f851794d6	Merge branch 'master' into 0.11	2011-10-16 15:28:31 +02:00
Edward Hervey	9712fe8a54	tsdemux: Use gst_buffer_join instead of bufferlists This is really inefficient. We should track list of GstMemory instead.	2011-10-13 16:57:31 +02:00
Edward Hervey	a74c02bf23	tsdemux: Plug more leaks	2011-10-13 16:57:17 +02:00
Edward Hervey	db0633918a	mpegtsbase: Refactor scan loop Avoids ending up leaking packets when we got one and res was different from GST_FLOW_OK. It also looks more comprehensible	2011-10-13 16:55:54 +02:00
Edward Hervey	e4b7967c9d	mpegtsbase: Don't leak upstream events	2011-10-13 16:55:40 +02:00
Edward Hervey	0c80f63c5b	mpegtsbase: Refactor code to cope with g_hash_table_foreach_remove()	2011-10-13 16:55:05 +02:00
Edward Hervey	6abe2134bf	tsdemux/tsparse: Port to 0.11 This is a naive port that somewhat works but is inefficient. I need to rethink how to make the best out of GstMemory/GstBuffer	2011-10-12 18:06:16 +02:00
Thiago Santos	61a7e6bf38	camerabin2: Check before acessing preview location list Only access the preview location if it exists, to avoid acessing a NULL variable. If the preview location list doesn't exist, it is likely because the source has posted a preview message after camerabin2 has been put to READY.	2011-10-12 12:19:13 -03:00
Thiago Santos	e90e041e52	camerabin2: Add a mutex to avoid concurrent access of preview filename lists The preview filename list is acessed whenever a new capture is started, when camera-source posts a new preview message or on state changes. All of those can occur simultaneously, so add a mutex to prevent concurrent access.	2011-10-11 23:13:00 -03:00
Thiago Santos	17a00123a4	camerabin: Reset audiosrc timestamping Reset audiosrc's timestamping data by setting it to NULL to reset the ringbuffer and then re-seting the clock that camerabin might not redistribute	2011-10-11 18:48:07 -03:00
Thiago Santos	0f99118141	camerabin: Prevent audio source from providing clock camerabin's audio source might be put to NULL during its use, so the clock would be lost. Better not allow it to provide a clock at all.	2011-10-11 16:27:07 -03:00
Wim Taymans	5de9be0fdd	dvbsuboverlay: port to 0.11	2011-10-10 10:15:05 +02:00
Wim Taymans	11a7e26fd8	dvdspu: port to 0.11	2011-10-08 15:16:25 +02:00
Wim Taymans	c16cc4698a	Merge branch 'master' into 0.11	2011-10-08 11:17:11 +02:00
Wim Taymans	3267a38e37	dvdspu: beginning of port to 0.11	2011-10-06 17:56:35 +02:00
Thibault Saunier	f94236078c	h264parse: Make proper use of the h264parser lib in parse_chain Minor debugging logs fixes	2011-10-06 12:49:19 -03:00
Wim Taymans	e83fb140d5	Merge branch 'master' into 0.11	2011-10-06 14:05:42 +02:00
Wim Taymans	e82262969c	mpeg4videoparse: port to 0.11	2011-10-06 14:03:29 +02:00
Mark Nauwelaerts	9c221f492d	h264parse: properly interpret baseparse draining state ... which means the input data has reached the end, but need not exclude many separate frames may still need parsing. Fixes merging NALs into AU.	2011-10-06 12:26:23 +02:00
Sreerenj Balachandran	3129ea29b1	h264parse: correct the size argument of gst_h264_parser_identify_nalu_avc()	2011-10-06 11:59:41 +02:00
Sreerenj Balachandran	bbc30f3644	h264parse: minimum size of parsable avcC data should be 8	2011-10-06 11:59:38 +02:00
Wim Taymans	c94c332578	jpegformat: port to 0.11	2011-10-05 20:06:20 +02:00
Wim Taymans	bd0b3f0761	dataurisrc: port to 0.11	2011-10-04 18:38:50 +02:00
Wim Taymans	a7d614b963	Merge branch 'master' into 0.11	2011-10-04 13:29:21 +02:00
Sebastian Dröge	8e2c5833f1	videoparsers: Only fail to initialize the plugin if all parsers can't be registered	2011-10-04 12:31:05 +02:00
Sebastian Dröge	24241b809e	rtpvp8pay: Fix typo	2011-10-03 12:06:27 +02:00
Youness Alaoui	f5abb2c647	rtpvp8: Update the pay/depay to the ietf-draft-01 spec	2011-10-03 11:32:46 +02:00
Wim Taymans	d26f7319e9	Merge branch 'master' into 0.11	2011-10-03 11:24:04 +02:00
Vincent Penquerc'h	e4856a2965	mpegtsdemux: fix scanning stopping too early https://bugzilla.gnome.org/show_bug.cgi?id=648245	2011-10-03 11:15:16 +02:00
Vincent Penquerc'h	46dd7941f3	mpegpsdemux: take into account SCR offset when seeking Since the seeking byte offset is chosen by linear interpolation from SCR values, we need to take that first SCR into account to end up near the correct offset. Otherwise, as the code does a linear search after that first seek, it will take a LOOOOOONG time to get there for streams which don't start at zero. https://bugzilla.gnome.org/show_bug.cgi?id=659485	2011-09-30 15:15:06 +01:00
Vincent Penquerc'h	49d1121101	mpegdemux: answer position query with a stream time position https://bugzilla.gnome.org/show_bug.cgi?id=659485	2011-09-30 15:11:12 +01:00
Vincent Penquerc'h	71f28c44a0	mpegpsdemux: remove unused field https://bugzilla.gnome.org/show_bug.cgi?id=659485	2011-09-30 15:05:31 +01:00
Thiago Santos	379670e036	camerabin2: add location to preview image messages Makes camerabin2 intercept preview-image messages and add the filename corresponding to the message structure in the 'location' field. Makes easier for applications to track preview images	2011-09-29 18:21:06 -03:00
Robert Swain	6446cc4ae9	camerabin2: Fix potential loss of EOS event Setting the audio source to NULL just after pushing the EOS event on it could potentially cause loss of said EOS event. Instead, we can set the audio source to NULL when ready-for-capture is signalled and the boolean value is true as this indicates we are not currently capturing video.	2011-09-29 16:22:00 +02:00
Wim Taymans	7f4cf50496	Merge branch 'master' into 0.11	2011-09-26 22:31:17 +02:00
Wim Taymans	6a44e54b09	sdpdemux: port to 0.11	2011-09-26 22:30:13 +02:00
Robert Swain	f4e744ff49	camerabin2: Stop the audio source between captures Move the audio source setting of state to NULL to _stop_capture () to avoid the audio source running between captures.	2011-09-26 17:23:41 +02:00
Thibault Saunier	2c928aba19	codecparsers: Declare the new APIs as unstable for the time being	2011-09-26 08:11:45 -03:00
Vincent Penquerc'h	38cdb54112	mpegtsdemux: keep CRC table in .rodata https://bugzilla.gnome.org/show_bug.cgi?id=660118	2011-09-26 13:00:03 +02:00
Mark Nauwelaerts	e615cf15a9	irtspparse: add Interleaved RTSP parser element	2011-09-26 12:20:35 +02:00
Tim-Philipp Müller	ad1883f54d	psmux: fix writing of system header, which makes VLC not skip the adjacent PSM and play embedded H.264 streams header_length contains the length in bytes after the header_length field, excluding the 6 byte start code and header_length field. H.264 streams and some other formats need to be announced in the PSM. VLC wouldn't play files created with mpegpsmux containing H.264 because we claim the system header is larger than it actually is, which makes VLC skip the program stream map which follows the system header, which in turn makes it not recognise our H.264 video stream.	2011-09-22 20:11:21 +01:00
Mark Nauwelaerts	b142663ca5	h263parse: bring debug statements up to desired specs	2011-09-19 14:55:12 +02:00
Mark Nauwelaerts	66f644cfcc	h264parse: bring debug statements up to desired specs	2011-09-19 14:55:09 +02:00
Vincent Penquerc'h	837500af07	rtpvp8: fix bitstream parsing using the wrong kind of bitreader VP8 uses a probabilistic bool coder, not a straight bit coder. This fixes parsing when error-resilient is set. This commit includes a copy of libvpx's bool coder, BSD licensed. https://bugzilla.gnome.org/show_bug.cgi?id=652694	2011-09-19 11:33:34 +02:00
Thiago Santos	b8f9c3b39d	camerabin2: Adding 2 more log messages	2011-09-16 00:52:53 -03:00
Vincent Penquerc'h	25c3ce9a7a	camerabin2: replace deprecated g_atomic_int_exchange_and_add It was replaced by g_atomic_int_add, which now returns the old value. https://bugzilla.gnome.org/show_bug.cgi?id=659061	2011-09-16 00:52:53 -03:00
Thiago Santos	cc27a7fe3a	camerabin2: Reset last state change result on state-locked elements An element stores the result for the last state change it did and GstBin's state change handler will use this last result for state locked elements to decide if its state change was successfull or not. In camerabin2, the filesinks have their state locked and when they fail switching states, this last failure will be used if the application tries to change camerabin2's state, causing any state change to fail. This patch makes camerabin2 reset this last change failure, avoiding that camerabin2 fails on its next state changes.	2011-09-16 00:52:53 -03:00
Thibault Saunier	df551c0af4	mpegvideoparse: Handle properly frame detection Handle the case where we have buffers containing no startcode in the middle of a frame properly.	2011-09-14 12:13:19 -03:00
Mark Nauwelaerts	a31d541f07	mpegvideoparse: send a video-codec tag https://bugzilla.gnome.org/show_bug.cgi?id=569305	2011-09-14 16:14:54 +02:00
Thiago Santos	00e635e786	camerabin2: Check zoom notify callback from camera-source Camerabin2 has a zoom property that is simply proxied to its internal camera-source element. This patch makes camerabin2 listen to 'notify' signals from it so it can update its zoom property value when camera-source changes its zoom as a side-effect of another operation or because the user set the zoom directly to it, instead of doing it from camerabin2.	2011-09-12 17:49:25 -03:00
Alessandro Decina	6e9873038b	mpegvideoparse: fix compiler warnings	2011-09-12 10:23:36 +02:00
Thibault Saunier	404c18ab18	h264parse: Make use of the h264_nal_parser_free function	2011-09-09 15:02:35 -03:00
Sebastian Dröge	24517ba784	hlsdemux: Fix merge mistake from last commit	2011-09-09 12:27:57 +02:00
Youness Alaoui	55e4206159	hlsdemux: Report the correct timestamp for live streams Buffers would always start with timestamp 0 and we'd start streaming from the first buffer, but live streams always start streaming from the last fragment - 3 fragments in the playlist, which makes its timestamp, as returned by get_next_fragment, be whatever position they had in the playlist. This makes sure the position correctly reports the position of the buffer in the playlist, and added a shifting variable to allow seeking in the middle of fragments.	2011-09-09 12:21:36 +02:00
Youness Alaoui	894ac8f493	hlsdemux/tsdemux: Add HP copyright on work done on HLS	2011-09-09 12:12:12 +02:00
Youness Alaoui	609bdd6642	hlsdemux: set playlist to NULL after unreffing it to avoid a double-unref in the dispose	2011-09-09 12:11:42 +02:00
Youness Alaoui	84e67767a3	hlsdemux: Do not lock the mutex of the fetcher during EOS The fetch_location might call stop_fetcher which could generate an EOS and cause a deadlock	2011-09-09 12:10:56 +02:00
Youness Alaoui	baf875b928	hlsdemux: Do not join the task from the task's thread itself. join it only in the state change	2011-09-07 22:26:47 +02:00
Vincent Penquerc'h	1a6dbe1e27	mpegvideoparse: make this build with older glib g_list_free_full is a new convenience function. Replace it with g_list_foreach and g_list_free. https://bugzilla.gnome.org/show_bug.cgi?id=658450	2011-09-07 14:34:33 +02:00
Sebastian Dröge	724d7a3def	videoparsers: Make the h263 and (new) mpeg video parser autopluggable	2011-09-07 13:47:51 +02:00
George Kiagiadakis	ddf32e2c49	h264parse: Fix IDR position marking when the IDR is split into several NALs	2011-09-07 13:36:12 +03:00
Sebastian Dröge	e86e66e86c	h263parse: Add all always present fields to the src template caps	2011-09-07 11:29:37 +02:00
Sebastian Dröge	89aa5dae9d	diracparse: Add all fields to the src template caps	2011-09-07 11:29:37 +02:00
Sebastian Dröge	2adf76eb52	videoparsers: Allow parsed streams to be passed through the parsers	2011-09-07 11:29:37 +02:00
Sebastian Dröge	d4147a2798	h264parse: Put stream-format and alignment into the src template caps Also remove the parsed field from the sink template caps.	2011-09-07 11:29:37 +02:00
Sebastian Dröge	456335eab4	h264parse: Change rank to PRIMARY+1 to have h264parse autoplugged	2011-09-07 11:29:36 +02:00
Sebastian Dröge	29a358e8cd	diracparse: Constify some arrays	2011-09-07 11:29:36 +02:00
Wim Taymans	d4590a1959	Merge branch 'master' into 0.11	2011-09-06 16:13:28 +02:00
Sebastian Dröge	cfb986b6bf	h264parse: Add Converter to classification This parser can convert between different alignments and stream-formats.	2011-09-06 13:21:28 +02:00
Youness Alaoui	473e71e1ca	hlsdemux: If a fetch fails, decrement the sequence number	2011-09-03 09:09:02 +02:00
Youness Alaoui	5aa972eab2	hlsdemux: make hlsdemux lock/unlock the m3u8 client when it accesses it	2011-09-03 09:01:40 +02:00
Youness Alaoui	6133608789	hlsdemux: Add a get_target_duration and get_current_uri api to m3u8_client	2011-09-03 09:00:50 +02:00
Youness Alaoui	a252794a03	hlsdemux: Make the m3u8 client thread-safe	2011-09-03 09:00:35 +02:00
Sebastian Dröge	a82f92aed2	hlsdemux: Reset in PAUSED->READY after chaining up to the parent class Otherwise there are possible race conditions with the streaming thread.	2011-09-02 19:45:21 +02:00
Thibault Saunier	b968f82b18	h264parse: Port to the new h.264 parsing library	2011-09-02 15:46:02 +02:00
Thibault Saunier	a983b29a49	mpegvideoparse: Port to the new mpeg parsing library	2011-09-02 15:46:02 +02:00
Sebastian Dröge	0561c3751c	hlsdemux: Remove obsolete FIXME comment	2011-09-02 15:00:58 +02:00
Sebastian Dröge	82bbc76f15	hlsdemux: Reset the internal state going to/from READY instead of NULL This theoretically allows reuse of the element when setting it to READY instead of NULL.	2011-09-02 14:55:45 +02:00
Sebastian Dröge	445f626016	hlsdemux: Set playlist parsing helper object to NULL after freeing	2011-09-02 14:54:56 +02:00
Youness Alaoui	acacc251fa	hlsdemux: Allow up to 3 consecutive failed downloads before erroring In some networks, especiall in 3G, a fragment download or playlist update may fail. We allow for up to 3 consecutive failures, while using the rfc's specs for retry delays before considering that there was an error on the stream.	2011-09-02 14:52:07 +02:00
Youness Alaoui	8889c5927c	hlsdemux: remove unused argument	2011-09-02 14:51:11 +02:00
Robert Swain	db0739e54f	camerabin2: Add a flag to disable image conversion elements If we know that our camera source element produces buffers at the same resolution and appropriate colourspace for the output, we don't need any of the generic conversion elements in encodebin. This reduces caps negotiation overheads among other things.	2011-09-01 15:57:50 +02:00
Thiago Santos	2ed3d1b309	camerabin2: Micro optimize encodebin pads linking Reduce one check in encodebin pads linking on camerabin2 by using the link_pads_full version	2011-08-31 15:45:18 -03:00
Thiago Santos	ac7fc0d357	camerabin2: Use explicit boolean literals to make gobject happy gobject boolean properties are strict and only accept 1 or 0, otherwise they throw an assertion.	2011-08-31 15:45:18 -03:00
Sebastian Dröge	cf8f00d57a	hlsdemux: Just join the task gst_task_join() will already stop the task, no need to stop it additionally.	2011-08-31 14:48:47 +02:00
Sebastian Dröge	119771eaab	hlsdemux: Join the task instead of just stopping it and not waiting for it to finish Fixes interesting race conditions that cause crashes in decodebin2 because pads are added/removed from child elements although they should be in READY state already.	2011-08-31 14:47:40 +02:00
Sebastian Dröge	c8b7ae1ffa	hlsdemux: Remove unused variable	2011-08-31 12:12:59 +02:00
Youness Alaoui	0c97deb59d	hlsdemux: switch to higher/lower bitrate by more than one step at a time	2011-08-31 12:12:33 +02:00
Youness Alaoui	6436747eb0	hlsdemux: remove spamming GST_LOG_OBJECT	2011-08-31 12:11:32 +02:00
Youness Alaoui	277a7d05b2	hlsdemux: If paused, do not cache fragments until out of memory error! We should stop the update thread in PAUSED state and avoid fetching new fragments when the queue is not empty. The queue should always be empty since we push data into a queue. Also, in totem, if we seek and pause the stream while it's buffering, then the state will stay playing for some reason, so it's best not to continue fetching fragments forever.	2011-08-31 12:11:20 +02:00
Youness Alaoui	917708df82	hlsdemux: start/stop update thread and keep track of status	2011-08-31 12:10:32 +02:00
Youness Alaoui	4724b9a5b6	hlsdemux: Post duration message when we parse the playlist	2011-08-31 12:09:53 +02:00
Youness Alaoui	f93939b46c	hlsdemux: Send a flush-stop when switching pads. Fixes A->A/V sync issue. This is to ensure that we reset the accumulate segment on the sinks so if we start with audio only then switch to audio+video, then both sinks will have the same segments and will be synchronized.	2011-08-31 12:09:38 +02:00
Youness Alaoui	ed5a5cc139	hlsdemux: seems there was a typo, free the adapter if it contains data, not if already empty	2011-08-30 16:18:30 +02:00
Youness Alaoui	4a6d888961	hlsdemux: oups, we need to empty the queue after freeing its content	2011-08-30 16:18:08 +02:00
Youness Alaoui	59c61209cf	tsdemux: Need to flush all streams when we receive a flush-start	2011-08-30 16:17:47 +02:00
Youness Alaoui	cb30cd242c	hlsdemux: do not broadcast the fetcher_cond on bus error if we're cancelled If we cancel the fetch and call the stop_fetcher, which holds the lock, when it sets the fetcher's state to NULL, it might send an error on the bus. In that case, we must ignore it, otherwise it will try to take the lock and will block forever.	2011-08-30 16:16:54 +02:00
Jonas Larsson	fc0fe37b10	hlsdemux: Split playslist on \r\n not just \n	2011-08-30 16:16:07 +02:00
Youness Alaoui	6e9eeb7678	hlsdemux: Do not succeed a download if the fetcher had an error	2011-08-30 16:15:41 +02:00
Youness Alaoui	e22c300be2	hlsdemux: Rename functions that need to be called with a locked mutex	2011-08-30 16:15:28 +02:00
Youness Alaoui	50d0468241	hlsdemux: We must signal the fetcher_cond while holding its lock	2011-08-30 16:15:03 +02:00
Youness Alaoui	3054355dc1	hlsdemux: We do not need to set the current playlist to the main one When caching fragments, if we set the current playlist to main, then it will always think it's a live stream (no endlist in it) so it will force the redownload of the main playlist after every seek, which is unnecessary. Also, it causes a race condition where a seek migh happen during that redownload, and we'll think we're trying to seek a live pipeline.	2011-08-30 16:14:30 +02:00
Thiago Santos	5ae630489c	camerabin2: Make viewfinder's queue a thread limit only Reduce the viewfinder queue limits to only allow it to store one buffer, preventing the queue from holding old buffers for too long. This also avoids showing slightly outdated frames on the viewfinder when the source has already produced new ones and improves the buffer recycling rate, important for sources that use bufferpools.	2011-08-26 09:43:14 -03:00
Youness Alaoui	e380fbb019	tsdemux: In push mode, do not start pull loop if upstream seek fails	2011-08-26 09:51:46 +02:00
Youness Alaoui	108493ee51	hlsdemux: do not make the update_thread joinable	2011-08-26 09:51:46 +02:00
Youness Alaoui	8c04ea47d2	hlsdemux: Ensure the task is paused in case of cache error	2011-08-26 09:51:46 +02:00
Youness Alaoui	46ac6a2589	hlsdemux: stop the threads in the proper order first pause the task, then stop all fetchers, then stop the update thread then pause the task again, since it might have been restarted by another thread in the meantime	2011-08-26 09:51:46 +02:00
Youness Alaoui	015d1e11e2	hlsdemux: do not post an error if we seek/cancel during caching of fragments	2011-08-26 09:51:46 +02:00
Youness Alaoui	d69297a23c	hlsdemux: if we're canceling a fetcher, we must stop its thread	2011-08-26 09:51:46 +02:00
Youness Alaoui	42401da686	hlsdemux: lock the update_thread mutex before stopping it	2011-08-26 09:51:46 +02:00
Youness Alaoui	39657fa52f	hlsdemux: lock the fetcher mutex before stopping it	2011-08-26 09:51:45 +02:00
Youness Alaoui	e1a0bdcdf5	hlsdemux: do not allow two fetchers to run simultanously	2011-08-26 09:51:45 +02:00
Youness Alaoui	adcfcabb14	hlsdemux: Stop the streaming task on PAUSED_TO_READY state change	2011-08-26 09:51:45 +02:00
Wim Taymans	ad06ac2b4b	Merge branch 'master' into 0.11 Conflicts: ext/resindvd/rsnwrappedbuffer.c	2011-08-25 12:49:26 +02:00
Olivier Crête	1fdae52753	dtmf: Add more debug	2011-08-24 12:24:18 -04:00
Olivier Crête	4167697c0e	dtmf: Max event type is 15	2011-08-24 12:24:18 -04:00
Olivier Crête	e8268053c2	dtmfsrc: Align DTMF sound buffers with last-stop from event Also make sure the timestamps never go backwards	2011-08-24 12:24:18 -04:00
Olivier Crête	2c7257481a	rtpdtmfsrc: Correctly recognize the end of a buffer	2011-08-24 12:24:18 -04:00
Olivier Crête	7c55ff3023	rtpdtmfsrc: Make sure rtpdtmfsrc timestamps don't overlap	2011-08-24 12:24:17 -04:00
Olivier Crête	e6c431a533	rtpdtmfsrc: Put the inter digit interval at the end, not at the start The reason is to let rtpdtmfmux drop buffers during the inter digit interval, this way, there will be more silence around the DTMF tones so IVFs will have a better chance recognizing them.	2011-08-24 12:24:17 -04:00
Olivier Crête	7837cc25fb	rtpdtmfsrc: Start at the last_stop from the start event if there was one The goal is to try to not have a GAP between the audio and the DTMF	2011-08-24 12:24:17 -04:00
Olivier Crête	859b8ebfc9	rtpdtmfmux: Add last-stop to dtmf-event upstream events Add the running time of the last outputted buffer to the upstream "dtmf-event" events so that the dtmf source does not leave a gap.	2011-08-24 12:24:17 -04:00
Olivier Crête	38aaf7cbab	rtpdtmfsrc: Respect ptime from the caps Respect the ptime from the caps for the DTMF packets	2011-08-24 12:24:17 -04:00
Olivier Crête	4f97524376	rtpdtmfsrc: Just error out if there is no clock	2011-08-24 12:24:17 -04:00
Sebastian Dröge	c86aba3469	tsdemux: Use FALSE instead of 0 for bool parameter	2011-08-24 09:35:18 +02:00
Youness Alaoui	744101a417	tsdemux: Need to send a newsegment after a seek	2011-08-24 08:12:29 +02:00
Youness Alaoui	a3fc3ec443	hlsdemux: Send buffering messages on the bus	2011-08-24 08:12:19 +02:00
Youness Alaoui	e2de4e5870	hlsdemux: cache the number of fragments we are required to cache	2011-08-24 08:12:14 +02:00
Youness Alaoui	cfd28a6f90	tsdemux: Forward seek/duration query/event to the sinkpad	2011-08-24 07:48:52 +02:00
Thiago Santos	69c65875ea	camerabin2: Optimize start up a little by removing some pad checks Some pad checks are guaranteed to work, so we can disable them by using gst_element_link_pads_full	2011-08-24 01:03:32 -03:00
Thiago Santos	011eddcd0e	camerabin2: Remove from experimental Remove camerabin2 from experimental, allowing it to be built without needing to pass --enable-experimental on configure.	2011-08-23 19:26:31 -03:00
Thiago Santos	e32897d809	camerabin2: Always set encodebin flags when going to ready When going from NULL to READY we want the encodebin flags to be set, and not only after creating encodebin (on the first run)	2011-08-23 19:13:21 -03:00
Thiago Santos	5c662ec0c7	camerabin2: Add new entry to flags property Adds a new entry to camerabin2 flags to disable viewfinder conversion elements.	2011-08-23 11:58:33 -03:00
Thiago Santos	dc9276b9ee	camerabin2: viewfinderbin: Add property for disabling converters Adds a new property to disable converters elements for performance reasons. It should only be used if the application knows they aren't needed.	2011-08-23 11:19:51 -03:00
Vincent Penquerc'h	66dbdfd4d1	tsdemux: do not try to compare a PCR with itself for statistics Especially as one of the logs will cause a divide by zero. https://bugzilla.gnome.org/show_bug.cgi?id=656927	2011-08-23 10:38:10 +02:00
Vincent Penquerc'h	b19a5ea1f3	tsdemux: do not keep a dangling pointer When removing the current program, it will get freed by the hash table removal callback, so ensure we clear our pointer to it. Fixes a crash later on in gst_ts_demux_push trying to access it. https://bugzilla.gnome.org/show_bug.cgi?id=656927	2011-08-23 10:37:24 +02:00
Vincent Penquerc'h	c437541791	dvdspu: do not clear out high bits from display area http://dvd.sourceforge.net/spu_notes does not mention that high bits are to be masked, and not clearing them makes a sample work, where clearing them yielded left > right. History does not shed any light, as tracing this code's origin shows the same bitmasks being there in 2007 when it was imported. https://bugzilla.gnome.org/show_bug.cgi?id=620119	2011-08-23 10:15:27 +02:00
Sebastian Dröge	6edff48378	mpegtsbase: First try if upstream handles seeking in TIME format before seeking in the demuxer	2011-08-23 09:52:20 +02:00
Sebastian Dröge	a27b7b6712	tsdemux: First send SEEKING queries upstream	2011-08-23 09:40:16 +02:00
Sebastian Dröge	ca0df16d52	tsdemux: Send DURATION query upstream first	2011-08-23 09:27:23 +02:00
Sebastian Dröge	20f9738c10	hlsdemux: Use FALSE instead of 0 for a bool parameter	2011-08-23 09:23:33 +02:00
Youness Alaoui	3f42050c34	hlsdemux: switch pads when we seek (need_segment) since tsdemux doesn't cope well with a reset	2011-08-23 09:22:40 +02:00
Youness Alaoui	2d90f1c0dc	hlsdemux: Add a FIXME comment. loop task should be a pad task	2011-08-23 09:21:03 +02:00
Youness Alaoui	b55f157d6f	hlsdemux: Do not seek in a live stream	2011-08-23 09:20:25 +02:00
Youness Alaoui	18f53cf547	hlsdemux: Do not take the pad stream lock, use the task's lock instead	2011-08-23 09:20:14 +02:00
Youness Alaoui	e2f69e1be9	hlsdemux: Implement EVENT_SEEK	2011-08-23 09:19:59 +02:00
Youness Alaoui	475abd15b6	hlsdemux: Implement the GST_QUERY_SEEKING properly	2011-08-23 09:18:16 +02:00
Youness Alaoui	ae4af3910e	hlsdemux: Implement correctly the GST_QUERY_DURATION	2011-08-23 09:17:30 +02:00
Youness Alaoui	a916d4dfd2	hlsdemux: Do not use GST_TASK_WAIT in the task function The task function uses GST_TASK_WAIT which does a g_cond_wait giving it the GST_OBJECT_GET_LOCK of the task. The mutex gets locked when g_cond_wait returns, so if we don't lock/unlock it, it will stay locked forever, preventing the task from ever finishing. We shouldn't lock the task object lock, so let's remove the GST_TASK_WAIT and make the task pause instead if there are no buffers in the queue.	2011-08-23 09:16:35 +02:00
Youness Alaoui	818762e8fc	tsdemux: do not send a new-segment on stream removal When a program is changed, stream_added is called which sets the need_newsegment to TRUE, then stream_removed is called, which calls the flush_pending_data, which checks for the newsegment and causes it to send a new-segment. We must not send the newsegment when flushing the pending data on the removed stream. We should only push it when flushing data on the newly added streams (after they finish parsing their PTS header)	2011-08-22 16:01:24 +02:00
Youness Alaoui	382710e200	tsdemux: Fix newsegment when switching programs If a program/stream is changed, then a newsegment is sent which must not be the same as the base segment since it happens later. We must shift the start position by the time elapsed since the newsegment and the current PTS of the stream	2011-08-22 16:01:17 +02:00
Youness Alaoui	4cc1dfb360	tsdemux: interpolate gap and fix timestamps depending on upstream segment	2011-08-22 15:55:47 +02:00
Youness Alaoui	690e59e497	hlsdemux: Keep a separate variable for the current variant used By using a separate variable, first it allows us to sort the lists of alternates but keep the pointer on the first occurence in the main playlist (to respect the spec of starting with the bitrate specified first in the main playlist). It also avoid playing with the lists variable which should be used to store the list of playlists and not as a pointer to the current one. Also fixes a memleak with the g_list_foreach freeing the lists, if it wasn't pointing to the first element of the list.	2011-08-22 15:46:41 +02:00
Tiago César Katcipis	382346a6f3	removesilence: new plugin Fixes: #597822. Signed-off-by: David Schleef <ds@schleef.org>	2011-08-21 15:28:08 -07:00
Thiago Santos	6c272aafa7	camerabin2: Prevent audiosrc from sending undesired eos Basesrc derived classes send an eos when they change state from paused to ready and that breaks video recordings on camerabin2 as it makes the whole audio branch pads flushing. Prevent it by using a pad probe that only allows the eos to pass when it is caused by a stop-capture action.	2011-08-21 18:23:16 -03:00
Thiago Santos	fefc27a586	camerabin2: Use gst_pad_send_event instead of eventfunc macro	2011-08-21 18:23:16 -03:00
Thiago Santos	fe206e75f7	camerabin2: Avoid assertions when plugin creation fails Capsfilters are created on the constructor and their properties can be set/get from camerabin2's set/get_property functions. The user with a broken setup would cause assertions when trying to set/get the capture caps of this camerabin2. A proper missing-plugin message will be posted when the user tries to set camerabin2 to READY state.	2011-08-21 18:23:16 -03:00
Alessandro Decina	fa6d174455	tsmux: remove unnecessary check remove an if (best) check where best != NULL has already been checked	2011-08-21 10:54:52 +02:00
Youness Alaoui	02bc614163	tsbase: reinitiate segment at flush-stop event only	2011-08-18 14:54:22 +02:00
Youness Alaoui	5878f71233	hlsdemux: Set buffer timestamp since we send a TIME segment	2011-08-18 14:05:10 +02:00
Youness Alaoui	8b762708cd	hlsdemux: Allow bandwidth switching during caching of fragments	2011-08-18 14:00:42 +02:00
Youness Alaoui	a62aa2b774	hlsdemux: set the pad's caps before adding it	2011-08-18 13:53:02 +02:00
Wim Taymans	52d48bb142	Merge branch 'master' into 0.11	2011-08-17 19:01:39 +02:00
Vincent Penquerc'h	0381919e83	aiffmux: drop data after 4ish GB and moan https://bugzilla.gnome.org/show_bug.cgi?id=654278	2011-08-16 23:25:38 +01:00
Vincent Penquerc'h	76c0f9bfe7	aiffmux: use guint32 for guint32 parameters This makes explicit that the range is limited. https://bugzilla.gnome.org/show_bug.cgi?id=654278	2011-08-16 20:32:27 +01:00
Vincent Penquerc'h	fb2479d1da	aiffmux: avoid integer overflow These values are 32 bits, and width is a multiple of 8. https://bugzilla.gnome.org/show_bug.cgi?id=654278	2011-08-16 20:31:55 +01:00
George Kiagiadakis	743b4677a2	mpeg4videoparse: Use gst_bit_reader_skip to skip more than 32 bits. GET_BITS is a macro for gst_bit_reader_get_bits_uint32, which cannot read more than 32 bits and will fail in this case where it is called to read 79 bits. Since we want to skip those bits, gst_bit_reader_skip is more appropriate in this case.	2011-08-16 19:05:52 +02:00
Thiago Santos	19e5736acd	camerabin2: Add audio-filter property Adds a property to add a custom GstElement to the audio branch of the pipeline. This allows the user to do custom audio processing/analysis when recording videos.	2011-08-13 11:42:07 -03:00
Stefan Kost	008fa0770b	basevisualizer: add more shader variants and simplify code Use macros to simplyfy the shading code. Those will ease to add support for other colorspaces in the future. Add more variants for the shading (left,right, horiz-in, vert-out, vert-in).	2011-08-12 22:39:53 +02:00
Stefan Kost	039ff3873b	basevisualizer: more docs	2011-08-12 21:22:20 +02:00
Stefan Kost	3ba5b8bd0e	baseaudiovisualizer: protect config with a lock Before it was easy to crash the elements when using a ximagesink and triggering renegotiation by resizing.	2011-08-12 21:18:44 +02:00
Stefan Kost	058c63d185	spectrascope: make a copy of the audiodata before downmixing and windowing The buffers come from the adapter and the data might overlap. We don't want to modify it in place.	2011-08-12 16:57:49 +02:00
Vincent Penquerc'h	2728ead8a2	mxf: do not assert on the values of data read from input Instead, log a warning, and return. https://bugzilla.gnome.org/show_bug.cgi?id=563827	2011-08-09 10:44:48 +02:00
Thiago Santos	8dc9551f9a	camerabin2: Adding video-done message video-done message will be posted when a video recording is finished. Similar to image-done message.	2011-08-06 19:55:48 -03:00
Thiago Santos	80fb917034	camerabin2: Adding top-level element documentation	2011-08-06 12:26:32 -03:00
Thiago Santos	69b7326399	camerabin2: Fixing typo	2011-08-06 12:26:32 -03:00
Alessandro Decina	b01ee6bbf1	mpegvideoparse: fix sequence header parsing After bitrate there's 11 bits (1 marker bit + VBV buffer size) before the load intra quantiser flag.	2011-08-04 09:52:25 +02:00
Wim Taymans	2ba07782cd	Merge branch 'master' into 0.11	2011-08-04 09:40:46 +02:00
Wim Taymans	01b9b5002f	Merge branch 'master' into 0.11 Conflicts: common configure.ac gst/colorspace/colorspace.c gst/colorspace/colorspace.h gst/colorspace/gstcolorspace.c	2011-08-04 09:36:07 +02:00
David Schleef	e98281d25f	subenc: Add webvttenc element	2011-08-03 13:39:34 -07:00
Tim 'mithro' Ansell	70c3fea5ac	inter: Adding missing base requirements. Fixes: #654806.	2011-08-03 13:38:37 -07:00
Thiago Santos	41989e358c	camerabin2: add more missing plugin checks Sprinkle some more missing plugin checks around	2011-08-03 15:34:26 -03:00
Thiago Santos	e9b72257e2	camerabin2: Add a missing element check and remove TODO Add missing element checks for elements created at _init functions and remove TODO about it	2011-08-03 15:34:26 -03:00
Thiago Santos	a68b1f049c	camerabin2: Remove redundant image-queue Encodebin is used for image encoding and it already contains a queue, so we can remove camerabin2 image queue.	2011-08-03 13:58:26 -03:00
Tim-Philipp Müller	cc9e490313	dvbsuboverlay: fix up copyrights	2011-08-03 13:54:21 +01:00
Tim-Philipp Müller	f0bc2dc05b	bayer: back around compiler warnings in orc-generated code by disabling -Werror for this plugin https://bugzilla.gnome.org/show_bug.cgi?id=652677	2011-08-02 23:53:08 +01:00
Thiago Santos	298af589eb	camerabin2: Workaround for ringbuffer not resyncing on READY Add a workaround to fix timestamps meanwhile bug https://bugzilla.gnome.org/show_bug.cgi?id=648359 is fixed.	2011-08-02 13:39:18 -03:00
Raluca Elena Podiuc	2e28fe2e18	camerabin2 remove redundant viewfinder-colorspace and viewfinder-scale camrabin2 connects a viewfinderbin on "vfsrc". viewfinderbin is made of: vfbin-csp ! vfbin-videoscale ! videosink. we should either remove csp/videoscale from wrappercamerabinsrc (as done in this patch) or we should get rid of viewfinderbin altogether.	2011-08-02 13:39:18 -03:00
Raluca Elena Podiuc	058a3d9d4c	basecamerasrc: remove unused get_allowed_input_caps The use of this method was removed in: commit `539f10f4d9` basecamerasrc: More cleanup The code from wrappercamerabinsrc is from v4l2camerasrc but is unused: get_allowed_input_caps is not called anywhere.	2011-08-02 13:39:18 -03:00
Teemu Katajisto	7e069060b3	camerabin2: Synchronize clock and base time to audiosrc When audio source goes to READY it loses its clock and base time, this patch sets them back after bringing the audio source back to PAUSED.	2011-08-02 13:39:17 -03:00
Robert Swain	7f720ed606	camerabin2: Prevent audio source from providing clock The audio source inside camerabin2 is put to READY and back to PLAYING when starting capture, causing the pipeline to lose its clock. As camerabin2 isn't put to PAUSED->PLAYING again during this, a new clock isn't selected for elements.	2011-08-02 13:39:17 -03:00
Robert Swain	2609427ada	camerabin2: Add flags prop to toggle encodebin conversion elements A flags property has been added to encodebin to toggle whether the conversion elements (ffmpegcolorspace, videoscale, audioconvert, audioresample, audiorate) are created and linked into the appropriate branches of encodebin. Not including these elements avoids some slow caps negotiation and allows the first buffers to flow through encodebin much more quickly. However, it imposes that the uncompressed input is appropriate for the target profile and elements selected to meet that profile.	2011-08-02 13:39:17 -03:00
Robert Swain	dae8d8fd5a	camerabin2: Prepare audiosrc before start-capture If we bring the audio source up to the PAUSED state before emitting the start-capture signal to the camera source, when subequently taking the audio source to the PLAYING state, it will begin capture more quickly.	2011-08-02 13:39:17 -03:00
Robert Swain	afee3b0301	camerabin2: Remove redundant elements Since camerabin2 has switched to encodebin and encodebin has its own queues and conversion elements, those preceding encodebin are no longer necessary and as such can be removed.	2011-08-02 13:39:17 -03:00
Edward Hervey	5c77682dab	tsdemux: Take into account upstream newsegment events If the incoming newsegment event was in time, use that position value for the downstream newsegments.	2011-08-01 18:49:55 +02:00
Edward Hervey	5572e63858	hlsdemux: Send NEWSEGMENT events Previously hlsdemux wasn't sending out any newsegment. Here we push a GST_FORMAT_TIME newsegment, and whenever possible we try to indicate the proper start time. This allows downstream elements to relay the start/time values properly to the sinks, allowing better stream switching.	2011-08-01 18:48:03 +02:00
Edward Hervey	adfb090b59	mpegtsbase: Remove programs on EOS Allows subclasses to properly flush out pending data.	2011-08-01 15:46:12 +02:00
Edward Hervey	57279cdd24	tsdemux: Refactor stream/program removal The program_stopped vmethod was called before stream_removed vmethod was being called. Since we only did stream-related operations in there, we just remove the program_stopped vmethod and do everything in the stream_removed one. Also, make sure we flush out all pending data before sending EOS.	2011-08-01 10:54:16 +02:00
Nicolas Dufresne	cbc0a2f056	mpegtsbase: Prevent stack gardening by using the right type stream_type is stored as guint inside the GstStructure but was retreived using valist with a pointer to guint16. This would cause stack gardening when code is compiled without optimisation (e.g. in -O0 the compiler wont pad the stack to optimise out required mask). https://bugzilla.gnome.org/show_bug.cgi?id=655540	2011-08-01 09:33:25 +02:00

... 9 10 11 12 13 ...

5035 commits