As the headers were broken in 0.10.26 the functions weren't really
usable back then, so we should advertise them as being there only
since 0.10.27.
Spotted by Mart Raudsepp.
When doing pad_allocs, use non-fixed caps suggestions and
try to fixate them before using. This makes possible to
have suggested buffer size with 0 in basetransform just
to signal upstream a renegotiation is needed
Fixes#576234Fixes#609046
This changes some APIs in compatible ways:
- Some functions now take "const char *" arguments, not "char *"
- Some structs now have "conts char *" members, not "char *"
The changes may cause warnings when compiling with the right warning
flags. You've been warned.
Also adds -Wwrite-strings as a warning flag in configure.ac.
https://bugzilla.gnome.org/show_bug.cgi?id=611692
Adds that warning to configure.ac
Includes a tiny change of the GST_BOILERPLATE_FULL() macro:
The get_type() function is no longer declared before being defined.
https://bugzilla.gnome.org/show_bug.cgi?id=611692
This makes it >10x faster if more than a single value is requested
by not searching in the GSequence for every value and converting
the value from GValue to the real value type.
The functions are called gst_byte_writer_put_{float32|float64}_*() and not
gst_byte_writer_put_{float|double}_*().
Spotted by: Benjamin Otte <otte@redhat.com>
_get_range() is a pad function set by ourselves, therefore we're certain that
the parent is a GstBaseSrc.
Speeds up _get_range by 38%, and the total call by 30%. (valgrind instruction
calls measurements).
Fixes#610246
Adds a new function to GstByteWriter that writes
a constant value to a memory area (aka memset).
Useful for adding padding to buffers.
Also updates .def file and docs.
API: gst_byte_writer_fill()
Updating the segment values must only be done while holding the
STREAM_LOCK and OBJECT_LOCK. This means, reading can be done as
long as one of them is held, not both, which removes some lock-unlock
blocks from performance critical code paths.
Also document, that gst_base_src_set_format() *must* be called in
states <= READY and add an assertion for this. Changing the format
later will completely mess up the segment information.
gst_byte_writer_reset_and_get_buffer wasn't declared
in .h, instead there was _reset_and_get_data_as_buffer.
Replace it with the real function name, that is smaller
and matches gst_byte_writer_free_and_get_buffer
https://bugzilla.gnome.org/show_bug.cgi?id=608726
For the reason outlined at the beginning of gst_private.h (inline
functions in glib may need the g_log_domain variable). Also include
gst_private.h before using any G_OS_* defines, esp. in plugin loader.
Add a method to perform get_range typefinding that also uses the
uri/location extension as an extra hint. It will first try to call the
typefind functions of the factories that handle the given extension. The result
is that in the common case, we only call one typefind function, which speeds up
the typefinding a lot.
Include unistd.h so that _POSIX_VERSION is actually defined when
it should be defined. Without that, stuff like fail_if(1) doesn't
actually fail, presumably because other parts of the code do include
unistd.h and then have _POSIX_VERSION defined.
Fixes#604565 even more.
Make sure we take ownership of the buffer early without increasing its refcount
when we go in the collect function. This reduces the amount of copies needed in
order to make the buffer writable in most cases.
In some cases we can avoid allocating a subbuffer and instead simply ref
the buffer. Callers should perform _make_metadata_writable() in all
cases now.
Add a method to install a clipping function that is called when a buffer is
received. Users of collectpads can then perform clipping on the incomming
buffers.
Also retab the header file a little.
See #590265
This allows demuxers to update the segment stop of an already
finished stream. This might be needed if some stream goes to
EOS before the duration of the longest stream is known to properly
set the segment stop of all streams to the same value in the end.
Set the pad flushing and stop the pad task when the initial seek fails
during activation. Avoids racy calls into the _create() function when
BaseSrc::stop() has already run.
Fixes: #603059
Also, fix some misspelled comments.
Rounding errors with the floating point rate could make it so that we
don't end up exactly at the required stepping duration.
Use the segment clipping boundaries, which are not subject to rate
adjustements, instead to detect when we reached the stepping duration.
Add some debug info related to going to the PAUSED state.
Some gcc versions warn about bytewriter writing to memory accessed
via a const guint8 pointer, despite our explicit cast to guint8 *.
Work around that by using an intermediary variable.
Fixes#598526.
When clamping the base time, correctly use 'now', instead of
'-now' - the intent is to prevent 'now-base' ever being
negative, which would cause a position report outside the segment.
Fixes: #602419
[A-Z] regexp fails under et_EE locale because Z in Estonian alphabet is
located after S and therefore characters starting with 'TUV...' are not
in the range anymore.
Fixes bug #602093.
and install into a different directory $(libexecdir/gstreamer-0.10) so that
everything is versioned properly.
NOTE: run 'make clean' after updating; if you are running an uninstalled setup,
you will need to update your gst-uninstalled script (unless it's symlinked
to gstreamer core master) and exit/enter your uninstalled environment to get
the updated environment. If you are running an installed setup, you should
run 'make uninstall' before merging this change or remove the old
plugin-scanner binary manually.
Fixes#601698.
Element base_time is a signed quantity, which leads to basesink returning
a position of 0 when dealing with a negative base time - which are quite
legal when clocks (such as the audio clock) are close to 0.
This doesn't manifest in normal pipelines, of course - but can happen
(at least) when manually setting the base time on a pipeline.
This avoids:
* triple-checking for the GType when type-checking is enabled (see #597260)
* Avoids going through an expensive no-argument checking which landed in
glib-2.22
* Avoids going through 2 extrac functions (g_object_new -> g_object_new_valist)
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
This avoids having to do the sorting everytime we use typefind
The behaviour of gst_type_find_factory_get_list has subtlely changed
in the sense that the order was previously undefined, whereas now
it returns them sorted by rank and then by name.
Use g_slide instead of nomal g_new, Also don't init struct with 0 as we need to
init it anyway with the real values.
Also join the 3 flags checks into one.
The list against which we run the comparefunc will only contain
GstPluginFeature, therefore remove the 6 expensive type checks we do
for every single comparision.
When we quickly switch from PLAYING to PAUSED and back to PLAYING it's possible
in some cases that the task refuses to start, This is because when we go to
PAUSED, we unschedule the clock timeout, which could return UNSCHEDULED when
we're back to PLAYING, causing the task to PAUSE again with a wrong-state.
This patch checks if we are running when we return with an UNSCHEDULED return
value and if we are, try to create a new buffer.
Fixes#597550
The code was previously:
* checking if ret was != OK
* .. but if it was FLOW_STEP, swith it to OK
* .. and then not using ret
Instead we just make it more compact by checking if it's OK or STEP.
In most places in core and baseclasses we just need the caps to do caps-
intersections. In that case ref'ed caps are enough (no need to copy).
This patch also switches the code to use the new functions.
API: gst_pad_get_caps_refed(), gst_pad_peer_get_caps_refed()
The normal functions are always useful to have for bindings, especially
runtime-created bindings like Seed or new GObject-Introspection based
Python bindings.
Add a simple version check when starting the plugin-scanner so we can
verify we're talking to one that talks the same language.
First try a plugin-scanner in the installed path, then try one via the
GST_PLUGIN_SCANNER env var if that doesn't work.
Update the uninstalled script.
Install the plugin-scanner to the libexec dir
Apparently the sed that ships on Solaris 10 doesn't support character
classes like [:alnum:], so don't use them. We don't need them for the
symbol names that are being extracted anyway.
Also, use $(SED) instead of 'sed'
Fixes: #596877
