Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Fix duration when no clock was provided. Fixes#520300.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
Ref audio clock class from a thread-safe context to make sure
we're not bit by GObjects lack of thread-safety here (#349410),
however unlikely that may be in practice.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Add debug info.
When going from PLAYING to PAUSED, pause the ringbuffer before calling
the parent state change function, just like the audiosink, because the
parent waits for the element to finish its processing before completing
the state change. This makes going to PAUSED a lot snappier.
When going from READY to PAUSED, don't allow the ringbuffer to start
yet.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstbaseaudiosink.c: (slave_method_get_type),
(gst_base_audio_sink_set_provide_clock),
(gst_base_audio_sink_get_provide_clock),
(gst_base_audio_sink_set_slave_method),
(gst_base_audio_sink_get_slave_method),
(gst_base_audio_sink_set_property),
(gst_base_audio_sink_get_property), (gst_base_audio_sink_drain),
(gst_base_audio_sink_none_slaving),
(gst_base_audio_sink_handle_slaving):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Expose methods for some object properties so that subclasses can more
easily configure them.
Added slave method none, that completely disables slaving to the
internal clock.
API: gst_base_audio_sink_set_provide_clock()
API: gst_base_audio_sink_get_provide_clock()
API: gst_base_audio_sink_set_slave_method()
API: gst_base_audio_sink_get_slave_method()
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_set_provide_clock),
(gst_base_audio_src_get_provide_clock),
(gst_base_audio_src_set_property),
(gst_base_audio_src_get_property), (gst_base_audio_src_create):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
Expose methods for some object properties so that subclasses can more
easily configure them.
API: gst_base_audio_src_set_provide_clock()
API: gst_base_audio_src_get_provide_clock()
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Also handle the case where there is no clock set on the audio source,
like in the unit tests.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init), (gst_base_audio_src_init),
(gst_base_audio_src_provide_clock),
(gst_base_audio_src_set_property),
(gst_base_audio_src_get_property), (gst_base_audio_src_create):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
Allow othe clocks than the internal clock to be used for the pipeline.
Add property to disable clock provide.
API: GstBaseAudioSrc::provide-clock
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_read_sector):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Small cleanups.
* ext/theora/theoradec.c: (theora_dec_sink_event):
Fix typo.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_set_gst_timestamp):
Add some FIXME
* gst/playback/gstdecodebin.c: (queue_underrun_cb):
And some debug info when a FIXME path is hit.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c: (_do_init),
(gst_base_audio_src_create):
* po/POTFILES.in:
When posting a warning message because samples were dropped, post
something more intelligible than he default error message for clock
errors which is just confusing in this context (#432984).
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosink.c
(gst_base_audio_sink_fixate): Implement, stolen from baseaudiosrc.
(gst_base_audio_sink_activate_pull): Remove the handwavey nego
stuff, as the base class handles this now. Actually tell the ring
buffer to start.
(gst_base_audio_sink_callback): Cast the ring buffer correctly.
How did this work before? Maybe I'm not as awesome a programmer as
I think.
* gst-libs/gst/audio/gstbaseaudiosrc.c
(gst_base_audio_src_fixate): Rework as a basesrc vmethod instead
of a pad function.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Add some more info in a WARNING.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Handle PAUSE in create function, use new -core addition to
wait for playing. Fixes pausing and resuming capture from an
audiosrc.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Constify some more.
Caller supports interrupted reads now.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_time), (gst_base_audio_sink_callback):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_time), (gst_base_audio_src_fixate),
(gst_base_audio_src_get_times), (gst_base_audio_src_get_offset),
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Do the delay calculation in the source/sink base classes as this is
specific for the capture/playback mode.
Try to fixate a bit better, like round depth up to a multiple of 8
bigger than width.
Handle underruns correctly by marking DISCONT on buffers and adjusting
timestamps to handle the gap.
Set offset/offset_end correctly on buffers.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_pause),
(gst_ring_buffer_samples_done), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Remove resync and underrun recovery from the ringbuffer.
Fix ringbuffer read code on under/overrun.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_set_clock),
(gst_base_audio_src_check_get_range), (gst_base_audio_src_create):
Don't try to post an error message when setting the clock fails
as this can happen when adding an element to a bin which will then
deadlock. Fixes#347296.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init),
(gst_base_audio_sink_provide_clock):
Use gobject_class instead of G_OBJECT_CLASS (klass)
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init), (gst_base_audio_src_init),
(gst_base_audio_src_set_clock), (gst_base_audio_src_provide_clock),
(gst_base_audio_src_get_time),
(gst_base_audio_src_check_get_range), (gst_base_audio_src_create),
(gst_base_audio_src_create_ringbuffer):
Fix latency and buffer-time constants and properties ala basesink.
Implement pull based scheduling. Fixes#346527.
Set default blocksize in GstBaseSrc to 0, we default to pushing out
one segment.
Refuse slaving to another clock instead of silently not working.
Only provide a clock when we are actually able to do so.
Various small cleanups and compiler hints.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c: (gst_base_audio_src_init),
(gst_base_audio_src_get_time), (gst_base_audio_src_create):
GstBaseAudioSrc must be live or it does not work.
* gst-libs/gst/audio/gstaudiosrc.c: (gst_audio_src_init):
Don't set live to TRUE as this is the default in the parentclass.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_time), (gst_base_audio_src_create),
(gst_base_audio_src_change_state):
Fix audio sources, forgot to make the ringbuffer
startable...
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_time), (gst_base_audio_src_create),
(gst_base_audio_src_change_state):
unparent instead of unref the ringbuffer.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_setcaps), (gst_base_audio_sink_event),
(gst_base_audio_sink_preroll), (gst_base_audio_sink_render):
Improve debugging.
Post error when caps cannot be parsed.
Resync on discontinuity in the stream.
Clip samples to segment boundaries.
return WRONG_STATE sooner when we are flushing.
* gst-libs/gst/audio/gstbaseaudiosrc.c: (gst_base_audio_src_init),
(gst_base_audio_src_get_time), (gst_base_audio_src_create):
Make audiosrc operate in TIME.
Set TIMESTAMP and DURATION on buffers.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
update strings, values are in microseconds
change the default sink buffer time to something that is smaller
(to help software volume mixing have a slightly lower delay) but
still be acceptable on Wim's laptop
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_change_state):
Fix the audiosrc base class again, we did not unflush.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Cleanups.
Commit and read from ringbuffer in samples rather than bytes.
Original commit message from CVS:
* ext/alsa/gstalsasink.c:
Also allow unsigned int.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Small cleanup
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c: (gst_base_audio_src_event),
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_read):
patch from Edgard Lima <edgard.lima@indt.org.br>
Fixed gstbaseaudiosrc adding ring buffer sync to it.
Original commit message from CVS:
2005-08-23 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosrc.c
(gst_base_audio_src_fixate): Only fixate endianness if it is
present in the caps.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_change_state):
Open and close device in READY<->NULL state change.
